| Title | Size | Downloads |
|---|---|---|
| LSQM2TGS48SG0 Card Manual-6PW103-book.pdf | 16.79 KB |
- Table of Contents
- Related Documents
-
48-port 10GBASE-R-SFP+ optical Ethernet interface card—LSQM2TGS48SG0
1 Card identifier
The card identifier LSQM2TGS48SG0 is in the upper right corner of the front panel.
2 Specifications
|
|
CAUTION: To avoid card damage, do not install this card in slot 10 on an S7510E switch. |
Table 1 Card specifications
|
Item |
Specification |
|
Card size (H × W × D) |
40 × 399 × 355 mm (1.57 × 15.71 × 13.98 in) |
|
SDRAM (DDR3) |
2GB |
|
Power consumption |
67W to152W |
|
Ports |
48 x 10GBASE-R-SFP+ fiber port |
|
Port speed |
10 Gbps |
|
|
NOTE: · To verify the compatibility of the card with the software release you are using, see the release notes. · For information about transceiver modules and cables available for the card, see the cards and transceiver modules compatibility matrixes for the device. |
3 Related documentation
For module installation, see the installation guide for the device.
For software upgrade, see the release notes for the device.
Copyright © 2016-2019 New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.
