H3C S6550X-HI Command References-R1116Pxx-6W100_CHM-book.rar(6.32 MB)
H3C S6550X-HI Command References-R1116Pxx-6W100-book.pdf(15.82 MB)
- Released At: 29-08-2023
- Page Views:
- Downloads:
- Table of Contents
- Related Documents
-
About the H3C S6550X-HI command references
The H3C S6550X-HI command references (R1116Pxx) describe the commands and command syntax options available for the H3C S6550X-HI Ethernet Switch Series running software Release 1116 and later.
Command reference | Content |
Fundamentals Command Reference | Covers the commands for logging in to and setting up the device. This command reference includes: · CLI (command privilege settings and CLI management commands). · RBAC. · Logging in to the device (login methods, and user interface configuration and access control). · FTP and TFTP. · File system management. · Configuration file management. · Software upgrade. · Target configuration management. |
System Management Command Reference | Covers the configuration commands for device management & monitoring and information center features. This command reference includes: · Basic device management. · Device hardening. · Hardware resource management. · EAA. · Process monitoring and maintenance · Information center. |
Interface Command Reference | Covers interface configuration commands. This command reference includes: · Common interface commands. · Bulk interface configuration. · Ethernet interface. · Loopback, null, and inloopback interfaces. · Tunnel interface. |
Layer 2—LAN Switching Command Reference | Covers the commands for configuring Layer 2 technologies and features in a LAN switched network. This command reference includes: · MAC address table. · Ethernet link aggregation. · Port isolation. · VLAN. · Loopback detection. · Spanning tree. · LLDP. · PFC. · Service loopback group. · M-LAG. · QinQ. · VLAN mapping. |
Layer 3—IP Services Command Reference | Covers the commands for configuring and managing IP addressing, network performance optimization, ARP, and interoperation between IPv4 and IPv6. This command reference includes: · ARP. · IP addressing. · DHCP. · DNS. · IP forwarding basics. · Fast forwarding. · Adjacency table. · IRDP. · IP performance optimization. · UDP helper. · IPv6 basics. · IPv6 neighbor discovery. · DHCPv6. · IPv6 fast forwarding. · IPv6 transition technologies. |
Layer 3—IP Routing Command Reference | Covers the commands for configuring routes for IPv4 and IPv6 networks of different sizes, route filtering, route control, and policy based routing. This command reference includes: · Basic IP routing. · Static routing. · RIP. · OSPF. · IS-IS. · Basic BGP. · Advanced BGP. · Policy-based routing. · IPv6 static routing. · RIPng. · OSPFv3. · IPv6 policy-based routing. · Routing policy. |
MCE Command Reference | Covers the MCE commands. This command reference includes: · MCE. |
ACL and QoS Command Reference | Covers the commands for classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency. This command reference includes: · ACL. · QoS. · Time range. |
IP Tunneling Command Reference | Covers IP tunneling commands. This command reference includes: · IPv4 over IPv4 tunneling. · IPv6 over IPv6 tunneling. · GRE. · IPsec. · IKEv2. · IKE. |
User Access and Authentication Command Reference | Covers the commands for configuring user access and authentication features. This command reference includes: · AAA. |
Security Command Reference | Covers security feature commands. The major security features available on the device include: data security (public key management and SSH), and attack protection (ARP attack protection, uRPF, attack detection and prevention). This command reference includes: · Password control. · Keychain. · Public key configuration. · PKI. · IPsec. · SSH. · SSL. · Attack detection and defense. · IP source guard. · ARP attack protection. · ND attack defense. · uRPF. · Crypto engine. |
High Availability Command Reference | Covers high availability commands for managing failure detection and failover. Failure detection technologies focus on fault detection and isolation. Failover technologies focus on network recovery. This command reference includes: · Monitor Link. · Error code detection. · VRRP. · BFD. · Track. · DLDP. · ERPS. · RRPP. · Smart Link. |
Network Management and Monitoring Command Reference | Covers the commands that help you manage and monitor your network, for example, manage system events, collect traffic statistics, sample packets, assess network performance, and test network connectivity. This command reference includes: · Ping and tracert. · System debugging. · NQA. · NTP. · SNMP. · RMON. · Event MIB. · Mirroring. · sFlow. · CWMP. · PTP. |
Telemetry Command Reference | Covers the commands for configuring telemetry related features. This command reference includes: · gRPC. |
Network Programmability Command Reference | Covers the commands for configuring network programmability. This command reference includes: · NETCONF. · Tcl. · Python. |