00-About the Configuration Guides

HomeSupportResource CenterSwitchesH3C S12500X-AF Switch SeriesH3C S12500X-AF Series SwitchesTechnical DocumentsConfigure & DeployConfiguration GuidesH3C S12500X-AF Switch Series Configuration Guides(R28xx)-6W10000-About the Configuration Guides
Table of Contents
Related Documents

About the H3C S12500X-AF configuration guides

CAUTION

CAUTION:

For information about modules supported by software Release 2820 and later, see the release notes for H3C S12500X-AF Release 2820 and later.

 

The H3C S12500X-AF configuration guides describe the software features available in Release 2820 and later versions of the H3C S12500X-AF Switch Series, and guide you through the software configuration procedures. These configuration guides also provide configuration examples to help you apply the software features to different network scenarios.

 

Configuration guide

Content

Fundamentals Configuration Guide

Covers information about using the command line interface, logging in to and setting up the device, and using the basic management features.

This guide includes:

·     CLI (command line interface overview and how to use the CLI).

·     RBAC.

·     Logging in to the device (login methods such as telnet, and user interface configuration and access control).

·     FTP and TFTP.

·     File system management.

·     Configuration file management.

·     Software upgrade.

·     ISSU.

·     GIR.

·     Automatic configuration.

·     Preprovisioning.

·     Device management.

·     Tcl.

·     Python.

·     License.

Virtual Technologies Configuration Guide

Covers IRF and MDC.

Layer 2—LAN Switching Configuration Guide

Covers Layer 2 technologies and features used on a LAN switched network, such as VLAN technology and port isolation. You can use these features to divide broadcast domains, remove Layer 2 loops, isolate users within a VLAN, or re-mark VLAN tags.

This guide includes:

·     MAC address table and MAC Information.

·     Bulk interface configuration.

·     Ethernet interface.

·     Ethernet link aggregation.

·     DRNI.

·     Port isolation.

·     VLAN (including super VLAN and private VLAN).

·     MVRP.

·     Loopback, null, and inloopback interfaces.

·     VLAN mapping.

·     Loop detection.

·     Spanning tree.

·     LLDP.

·     Service loopback group.

·     Cut-through Layer 2 forwarding.

Layer 3—IP Services Configuration Guide

Covers IP addressing (including static and dynamic IPv4 and IPv6 address assignment), network performance optimization, ARP, and interoperation between IPv4 and IPv6.

This guide includes:

·     ARP (ARP, gratuitous ARP, proxy ARP, ARP snooping, and ARP fast reply, ARP direct route advertisement).

·     IP addressing.

·     DHCP (DHCP overview, DHCP server, DHCP relay agent, DHCP client, DHCP snooping, BOOTP client).

·     DNS and DDNS.

·     IP forwarding basics and load sharing.

·     Fast forwarding.

·     Adjacency table.

·     IRDP.

·     IP performance optimization.

·     UDP Helper.

·     IPv6 basics.

·     DHCPv6 (DHCPv6 overview, DHCPv6 server, DHCPv6 relay agent, DHCPv6 client, and DHCPv6 snooping).

·     IPv6 fast forwarding.

·     Tunneling.

·     GRE.

·     HTTP redirect.

Layer 3—IP Routing Configuration Guide

Covers the routing technologies for IPv4 and IPv6 networks of different sizes, route filtering, route control, and policy based routing.

This guide includes:

·     Basic IP routing.

·     Static routing.

·     RIP.

·     OSPF.

·     IS-IS.

·     BGP.

·     Policy-based routing.

·     IPv6 static routing.

·     RIPng.

·     OSPFv3.

·     IPv6 policy-based routing.

·     Routing policy.

IP Multicast Configuration Guide

Covers Layer 2 IPv4 multicast protocols (including IGMP snooping, and multicast VLAN), Layer 3 IPv4 multicast protocols (including IGMP and PIM), Layer 2 IPv6 multicast protocols (including MLD snooping and IPv6 multicast VLAN), and Layer 3 IPv6 multicast protocols (including MLD, IPv6 PIM, and MSDP).

This guide includes:

·     Multicast overview.

·     IGMP snooping.

·     PIM snooping.

·     Multicast VLAN.

·     Multicast routing and forwarding.

·     IGMP.

·     PIM.

·     MSDP.

·     Multicast VPN.

·     MLD snooping.

·     IPv6 PIM snooping.

·     IPv6 multicast VLAN.

·     IPv6 multicast routing and forwarding.

·     MLD.

·     IPv6 PIM.

MPLS Configuration Guide

Covers MPLS features.

This guide includes:

·     Basic MPLS.

·     Static LSP.

·     LDP.

·     MPLS TE.

·     Static CRLSP.

·     RSVP.

·     Tunnel policy.

·     MPLS L3VPN and IPv6 MPLS L3VPN.

·     MPLS L2VPN.

·     VPLS.

·     MPLS OAM.

·     MCE and IPv6 MCE.

·     SR-MPLS.

ACL and QoS Configuration Guide

Covers information about classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency. You can use ACLs to help feature modules (such as QoS and IP routing) classify or filter traffic.

This guide includes:

·     ACL.

·     QoS:

¡     QoS overview.

¡     QoS policy.

¡     Priority mapping.

¡     Traffic policing, GTS, and rate limit.

¡     Congestion management.

¡     Congestion avoidance.

¡     Traffic filtering.

¡     Protocol packet rate limiting.

¡     Priority marking.

¡     Nesting.

¡     Traffic redirecting.

¡     Global CAR.

¡     Class-based accounting.

¡     Queue-based accounting.

¡     QPPB.

¡     Appendixes.

·     MPLS QoS.

·     Data buffer.

·     Time range.

Security Configuration Guide

Covers security features. The major security features available on the switch include identity authentication, access security, secure management, and attack protection.

This guide includes:

·     AAA.

·     Password control.

·     Keychain.

·     Public key management.

·     PKI.

·     IPsec, IKE, and IKEv2.

·     SSH.

·     SSL.

·     Object group.

·     Attack detection and prevention.

·     TCP attack prevention.

·     IP source guard.

·     ARP attack protection.

·     ND attack defense.

·     uRPF.

·     SAVA.

·     Crypto engine.

·     FIPS.

·     MACsec.

·     SAVI.

High Availability Configuration Guide

Covers high availability technologies and features available on the switch for failure detection and failover. Failure detection technologies focus on fault detection and isolation. Failover technologies focus on network recovery.

This guide includes:

·     Ethernet OAM.

·     CFD.

·     DLDP.

·     RRPP.

·     ERPS.

·     Smart Link.

·     Monitor Link.

·     VRRP.

·     Reth interface and redundancy group.

·     BFD.

·     Track.

·     Process placement.

Network Management and Monitoring Configuration Guide

Covers features that help you manage and monitor your network, for example, manage system events and test network connectivity.

This guide includes:

·     System maintenance and debugging (ping, tracert, and system debugging).

·     NQA.

·     NTP and SNTP.

·     PTP.

·     SNMP.

·     RMON.

·     Event MIB.

·     NETCONF.

·     Puppet.

·     Chef.

·     CWMP.

·     EAA.

·     Process monitoring and maintenance.

·     Sampler.

·     Mirroring (including both port and flow mirroring).

·     NetStream.

·     IPv6 NetStream.

·     sFlow.

·     Information center.

·     GOLD.

·     Packet capture.

·     VCF fabric.

·     Ansible.

Telemetry Configuration Guide

Covers gRPC fundamentals and configuration.

OAA Configuration Guide

Covers OAP module fundamentals and configuration and how to log in to the OAP operating system.

FC and FCoE Configuration Guide

Describes the application scenarios, fundamentals, and configuration of FC and FCoE.

OpenFlow Configuration Guide

Covers OpenFlow fundamentals and configuration.

VXLAN Configuration Guide

Covers VXLAN fundamentals and configuration.

EVPN Configuration Guide

Covers EVPN fundamentals and configuration.

Acronyms

Lists the significant acronyms in the configuration guides.