00-About the S12500R Command Reference

HomeSupportResource CenterSwitchesH3C S12500R Switch Router SeriesH3C S12500R Switch Router SeriesTechnical DocumentsReference GuidesCommand ReferencesH3C S12500R Switch Router Series Command References(R3606)-6W10000-About the S12500R Command Reference
Download Book
Table of Contents
Related Documents

About the H3C S12500R command references

CAUTION

CAUTION:

For information about modules supported by software Release 3606, see the release notes for H3C S12500R Release 3606.

 

The H3C S12500R command references describe the commands and command syntax options available for the H3C S12500R Switch Router Series running Release 3606.

 

Command reference

Content

Fundamentals Command Reference

Covers the commands for logging in to and setting up the device.

This command reference includes:

·     CLI (command privilege settings and CLI management commands).

·     RBAC.

·     Logging in to the device.

·     FTP and TFTP.

·     File system management.

·     Configuration file management.

·     Software upgrade.

·     Preprovisioning.

·     Device management.

·     Tcl.

·     Python.

·     License management.

Layer 2—LAN Switching Command Reference

Covers the commands for configuring Layer 2 technologies and features in a LAN switched network.

This command reference includes:

·     MAC address table and MAC Information.

·     Bulk interface configuration.

·     Ethernet interface.

·     Ethernet link aggregation.

·     Port isolation.

·     VLAN (including both VLAN and super VLAN).

·     Loopback, null, and inloopback interfaces.

·     VLAN mapping.

·     VLAN termination.

·     Loop detection.

·     LLDP.

·     Service loopback group.

·     Spanning tree.

·     Cut-through Layer 2 forwarding.

Layer 3—IP Services Command Reference

Covers the commands for configuring and managing IP addressing (including static and dynamic IPv4 and IPv6 address assignment), network performance optimization, ARP, and interoperation between IPv4 and IPv6.

This command reference includes:

·     ARP (including gratuitous ARP, proxy ARP, ARP snooping, ARP fast-reply, ARP suppression and ARP direct route advertisement).

·     IP addressing.

·     DHCP.

·     DNS and DDNS.

·     Basic IP forwarding and load sharing.

·     Fast forwarding.

·     Adjacency table.

·     IRDP.

·     IP performance optimization.

·     UDP helper.

·     IPv6 basics.

·     DHCPv6.

·     IPv6 fast forwarding.

·     Tunneling.

·     GRE.

Layer 3—IP Routing Command Reference

Covers the commands for configuring routes for IPv4 and IPv6 networks of different sizes, route filtering, route control, and policy based routing.

This command reference includes:

·     Basic IP routing.

·     Static routing.

·     RIP.

·     OSPF.

·     IS-IS.

·     BGP.

·     Policy-based routing.

·     IPv6 static routing.

·     RIPng.

·     OSPFv3.

·     Routing policy.

IP Multicast Command Reference

Covers the commands for Layer 2 IPv4 multicast protocols (including IGMP snooping), Layer 3 IPv4 multicast protocols (including IGMP and PIM), Layer 2 IPv6 multicast protocols (including MLD snooping), and Layer 3 IPv6 multicast protocols (including MSDP).

This command reference includes:

·     IGMP snooping.

·     Multicast routing and forwarding.

·     IGMP.

·     PIM.

·     MSDP.

·     MLD snooping.

·     IPv6 multicast routing and forwarding.

·     MLD.

·     IPv6 PIM

MPLS Command Reference

Covers the MPLS commands.

This command reference includes:

·     Basic MPLS.

·     Static LSP.

·     LDP.

·     MPLS TE.

·     Static CRLSP.

·     RSVP.

·     Tunnel policy.

·     MPLS L3VPN.

·     MPLS L2VPN.

·     VPLS.

·     MPLS OAM.

·     MCE and IPv6 MCE.

Segment Routing Command Reference

Covers the Segment Routing commands.

This command reference includes:

·     MPLS SR.

·     SR-TE Policy

ACL and QoS Command Reference

Covers the commands for classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency.

This command reference includes:

·     ACL.

·     QoS (including QoS policy, priority mapping, GTS and rate limit, congestion management, congestion avoidance, aggregate CAR, queue-based accounting, and QPPB).

·     MPLS QoS.

·     Data buffer.

·     Time range.

Security Command Reference

Covers security feature commands.

This command reference includes:

·     AAA.

·     Password control.

·     Keychain.

·     Public key management.

·     PKI.

·     IPsec, IKE, and IKEv2.

·     SSH.

·     SSL.

·     Attack detection and prevention.

·     IP source guard.

·     ARP attack protection.

·     ND attack defense.

·     uRPF.

·     Crypto engine.

High Availability Command Reference

Covers high availability commands for managing failure detection and failover. Failure detection technologies focus on fault detection and isolation. Failover technologies focus on network recovery.

This command reference includes:

·     Ethernet OAM.

·     CFD.

·     DLDP.

·     RRPP.

·     ERPS.

·     Smart Link.

·     Monitor Link.

·     Error code detection

·     VRRP.

·     BFD.

·     Track.

·     Process placement.

·     S-Trunk.

Network Management and Monitoring Command Reference

Covers the commands that help you manage and monitor your network, for example, manage system events, collect traffic statistics, sample packets, assess network performance, and test network connectivity.

This command reference includes:

·     System maintenance and debugging (ping, tracert, and system debugging).

·     NQA.

·     NTP and SNTP.

·     PTP

·     Network synchronization

·     SNMP.

·     RMON.

·     Event MIB.

·     NETCONF.

·     EAA.

·     Process monitoring and maintenance.

·     Sampler.

·     Mirroring (including both port and traffic mirroring).

·     NetStream.

·     IPv6 NetStream.

·     sFlow.

·     TCP connection trace.

·     Performance management,

·     Information center.

·     GOLD.

Telemetry Command Reference

Covers the commands that help you configure telemetry.

This command reference includes gRPC.

OpenFlow Command Reference

Covers the commands for configuring OpenFlow.

VXLAN Command Reference

Covers the commands for configuring VXLAN.

EVPN Command Reference

Covers the commands for configuring EVPN.