- Released At: 14-01-2023
- Page Views:
- Downloads:
- Table of Contents
- Related Documents
-
LSXM1CDMS36KCR1 36-port 400GBASE QSFP-DD MACsec Ethernet optical interface module
1 Identifier
The module identifier LSXM1CDMS36KCR1 is on the far right of the front panel.
2 Specifications
|
CAUTION: This module can be used only with Type K fabric modules, which have a character string of SFK in their module identifiers (LSXM1SFK08FR1 for example). Module damage will occur if this module is used with a fabric module that is not Type K. |
|
NOTE: Fabric modules are installed in the slots behind fan trays. To verify the module identifiers of fabric modules when the device is operating, use the display device command. |
Table 1 Module specifications
Item |
Specification |
Processor |
Intel processor (Quad Core) @ 2.2 GHz |
SDRAM |
16 GB DDR4 SDRAM |
Power consumption |
486 W to 1712 W |
Interfaces |
36 × 400G QSFP-DD ports (support MACsec) |
Transmission rate |
400 Gbps |
Compatible device models |
· S12516CR switch router · S12508CR switch router |
Compatible fabric modules |
Type K fabric modules. |
|
IMPORTANT: · To verify compatibility of the module with the software release you are using, see the release notes. · For information about transceiver modules and cables available for the module, see H3C S12500R Switch Router Series Cards and Transceiver Modules Compatibility Matrixes. |
3 Related documentation
For module installation, see H3C S12500CR Switch Router Series Installation Guide.
For software upgrade, see the release notes for the device.
Copyright © 2022 New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.