00-About the S12500R Configuration Guide

HomeSupportResource CenterSwitchesS12500R SeriesS12500R SeriesTechnical DocumentsConfigure & DeployConfiguration GuidesH3C S12500R Switch Router Series Configuration Guides(R3606)-6W10000-About the S12500R Configuration Guide
Download Book
Table of Contents
Related Documents

About the H3C S12500R configuration guides

CAUTION

CAUTION:

For information about modules supported by software Release 3606, see the release notes for H3C S12500R Release 3606.

 

The H3C S12500R configuration guides describe the software features for the H3C S12500R Switch Router Series running Release 3606, and guide you through the software configuration procedures. These configuration guides also provide configuration examples to help you apply the software features to different network scenarios.

 

Configuration guide

Content

Fundamentals Configuration Guide

Covers information about using the command line interface, logging in to and setting up the device, and using the basic management features.

This guide includes:

·     CLI (command line interface overview and how to use the CLI).

·     RBAC.

·     Logging in to the device (login methods including CLI, SNMP, and Restful, and user interface configuration and access method).

·     FTP and TFTP.

·     File system management.

·     Configuration file management.

·     Software upgrade.

·     Automatic configuration.

·     Preprovisioning.

·     Device management.

·     Tcl.

·     Python.

·     License management.

Layer 2—LAN Switching Configuration Guide

Covers Layer 2 technologies and features used on a LAN switched network, such as VLAN technology, port isolation, and spanning tree. You can use these features to divide broadcast domains, remove Layer 2 loops, isolate users within a VLAN, or re-mark VLAN tags.

This guide includes:

·     MAC address table and MAC Information.

·     Bulk interface configuration.

·     Ethernet interface.

·     Ethernet link aggregation.

·     Port isolation.

·     VLAN (including both VLAN and super VLAN).

·     loopback, null, and inloopback interfaces.

·     VLAN mapping.

·     VLAN termination.

·     Loop detection.

·     LLDP.

·     Service loopback group.

·     Spanning tree.

·     Cut-through forwarding.

Layer 3—IP Services Configuration Guide

Covers IP addressing (including static and dynamic IPv4 and IPv6 address assignment), network performance optimization, ARP, and interoperation between IPv4 and IPv6.

This guide includes:

·     ARP (including gratuitous ARP, proxy ARP, ARP snooping, ARP fast-reply, and ARP direct route advertisement).

·     IP addressing.

·     DHCP (including DHCP overview, DHCP server, DHCP relay agent, DHCP client, DHCP snooping, and BOOTP client).

·     DNS and DDNS.

·     Basic IP forwarding and load sharing.

·     Fast forwarding.

·     Adjacency table.

·     IRDP.

·     IP performance optimization.

·     UDP helper.

·     IPv6 basics.

·     DHCPv6 (including DHCPv6 overview, DHCPv6 server, DHCPv6 relay agent, DHCPv6 client, and DHCPv6 snooping).

·     IPv6 fast forwarding.

·     Tunneling.

·     GRE.

Layer 3—IP Routing Configuration Guide

Covers the routing technologies for IPv4 and IPv6 networks of different sizes, route filtering, route control, and policy based routing.

This guide includes:

·     Basic IP routing.

·     Static routing (including default route configuration).

·     RIP.

·     OSPF.

·     IS-IS.

·     BGP.

·     Policy-based routing.

·     IPv6 static routing.

·     RIPng.

·     OSPFv3.

·     Routing policy.

IP Multicast Configuration Guide

Covers Layer 2 IPv4 multicast protocols (including IGMP snooping), Layer 3 IPv4 multicast protocols (including IGMP and PIM), Layer 2 IPv6 multicast protocols (including MLD snooping), and Layer 3 IPv6 multicast protocols (including MSDP).

This guide includes:

·     Multicast overview.

·     IGMP snooping.

·     Multicast routing and forwarding.

·     IGMP.

·     PIM.

·     MSDP.

·     MLD snooping.

·     IPv6 multicast routing and forwarding.

·     MLD.

·     IPv6 PIM

MPLS Configuration Guide

Covers MPLS features.

This guide includes:

·     Basic MPLS.

·     Static LSP.

·     LDP.

·     MPLS TE.

·     Static CRLSP.

·     RSVP.

·     Tunnel policy.

·     MPLS L3VPN.

·     MPLS L2VPN.

·     VPLS.

·     MPLS OAM.

·     MCE and IPv6 MCE.

Segment Routing Configuration Guide

Covers Segment Routing features.

This guide includes:

·     MPLS SR.

·     SR-TE Policy

ACL and QoS Configuration Guide

Covers information about classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency. You can use ACLs to help feature modules (such as QoS and IP routing) classify or filter traffic.

This guide includes:

·     ACL.

·     QoS (including QoS overview, QoS policy, priority mapping, traffic policing, GTS, and rate limit, congestion management, congestion avoidance, traffic filtering, protocol packet rate limiting, priority marking, nesting, traffic redirecting, aggregate CAR, class-based accounting, queue-based accounting, QPPB, and appendixes).

·     MPLS QoS.

·     Data buffer.

·     Time range.

Security Configuration Guide

Covers security features.

This guide includes:

·     AAA.

·     Password control.

·     Keychain.

·     Public key management.

·     PKI.

·     IPsec, IKE, and IKEv2.

·     SSH.

·     SSL.

·     Attack detection and prevention.

·     IP source guard.

·     ARP attack protection.

·     ND attack defense.

·     uRPF.

·     Crypto engine.

High Availability Configuration Guide

Covers high availability technologies and features available on the switch for failure detection and failover. Failure detection technologies focus on fault detection and isolation. Failover technologies focus on network recovery.

This guide includes:

·     Ethernet OAM.

·     CFD.

·     DLDP.

·     RRPP.

·     ERPS.

·     Smart Link.

·     Monitor Link.

·     Error code detection

·     VRRP.

·     BFD.

·     Track.

·     Process placement.

·     S-Trunk.

Network Management and Monitoring Configuration Guide

Covers features that help you manage and monitor your network, for example, manage system events, collect traffic statistics, sample packets, assess network performance, and test network connectivity.

This guide includes:

·     System maintenance and debugging (ping, tracert, and system debugging).

·     NQA.

·     NTP and SNTP.

·     PTP

·     Network synchronization

·     SNMP.

·     RMON.

·     Event MIB.

·     NETCONF.

·     Puppet.

·     Chef.

·     EAA.

·     Process monitoring and maintenance.

·     Sampler.

·     Mirroring (including both port and traffic mirroring).

·     NetStream.

·     IPv6 NetStream.

·     sFlow.

·     TCP connection trace.

·     Performance management.

·     Information center.

·     GOLD.

Telemetry Configuration Guide

Covers gRPC fundamentals and configuration.

OpenFlow Configuration Guide

Covers OpenFlow fundamentals and configuration.

VXLAN Configuration Guide

Covers VXLAN fundamentals and configuration.

EVPN Configuration Guide

Covers the fundamentals, and configuration of EVPN features. This guide includes:

·     EVPN overview

·     EVPN VPLS

·     EVPN VPWS

Acronyms

Lists the significant acronyms in the configuration guides.

 

Contact Sales