00 About the H3C MSR command references

HomeSupportResource CenterReference GuidesCommand ReferencesH3C MSR Router Series Comware 7 Command References-R0615-6W20200 About the H3C MSR command references
Download Book
Table of Contents
Related Documents

About the H3C MSR command references

The H3C MSR command references describe the commands and command syntax options available for the H3C MSR Router Series.

 

Command reference

Content

Fundamentals Command Reference

Covers the commands for logging in to and setting up a MSR router.

This command reference includes:

·         CLI .

·         RBAC.

·         Login management .

·         FTP and TFTP.

·         File management.

·         Configuration file management.

·         Software upgrade.

·         ISSU.

·         Emergency shell .

·         Automatic.

·         Security zone

·         Device management.

·         Tcl.

·         Python.

·         License management.

Virtual Technologies Command Reference

Covers the Virtual Technologies configuration commands.

This command reference includes:

·         IRF.

Interface Command Reference

Covers the interface configuration commands.

This command reference includes:

·         Bulk interface.

·         Ethernet interface.

·         WAN interfaces.

·         POS interface.

·         CPOS interface.

·         ATM interface.

·         Loopback and null interfaces

Layer 2—LAN Switching Command Reference

Covers the commands for configuring Layer 2 technologies and features in a LAN switched network.

This command reference includes:

·         MAC address table.

·         Ethernet link aggregation.

·         Port isolation.

·         VLAN.

·         QinQ.

·         Loopback detection.

·         Spanning tree.

·         LLDP.

·         Layer 2 forwarding.

·         VLAN termination.

Layer 2—WAN Access Command Reference

Covers WAN access technologies.

This command reference includes:

·         PPP.

·         L2TP.

·         HDLC.

·         ISDN.

·         ATM.

·         Modem management.

·         3G and 4G modem management.

·         DDR.

·         Frame Relay.

Terminal Access Command Reference

Covers terminal access technologies.

This command reference includes:

·         POS terminal access.

·         RTC terminal access.

Layer 3—IP Services Command Reference

Covers the commands for configuring and managing IP addressing, network performance optimization, ARP, and interoperation between IPv4 and IPv6.

This command reference includes:

·         ARP.

·         IP addressing.

·         DHCP.

·         DNS.

·         NAT.

·         IP forwarding basics.

·         Fast forwarding.

·         Flow classification.

·         Adjacency table.

·         IRDP.

·         IP performance optimization.

·         UDP Helper.

·         IPv6 basics.

·         DHCPv6.

·         IPv6 fast forwarding.

·         Tunneling.

·         GRE.

·         ADVPN.

·         WAAS.

·         AFT.

·         Lighttpd Web service.

Layer 3—IP Routing Command Reference

Covers the commands for configuring routes for IPv4 and IPv6 networks of different sizes, route filtering, route control, and policy based routing.

This command reference includes:

·         Basic IP routing.

·         Static routing.

·         RIP.

·         OSPF.

·         IS-IS.

·         BGP.

·         Policy-based routing.

·         IPv6 static routing.

·         RIPng.

·         OSPFv3.

·         IPv6 IS-IS.

·         IPv6 policy-based routing.

·         Routing policy.

·         MTR

IP Multicast Command Reference

Covers the commands for Layer 2 IPv4 multicast protocols, Layer 3 IPv4 multicast protocols, Layer 2 IPv6 multicast protocols, and Layer 3 IPv6 multicast protocols.

This command reference includes:

·         IGMP snooping.

·         Multicast routing and forwarding.

·         IGMP.

·         PIM.

·         MSDP.

·         Multicast VPN.

·         MLD snooping.

·         IPv6 multicast routing and forwarding.

·         MLD.

·         IPv6 PIM.

MPLS Command Reference

Covers the MPLS commands.

This command reference includes:

·         Basic MPLS.

·         Static LSP.

·         LDP.

·         MPLS TE.

·         Static CRLSP.

·         RSVP.

·         Tunnel policy.

·         MPLS L3VPN.

·         MPLS L2VPN.

·         L2VPN access to L3VPN or IP backbone.

·         MPLS OAM.

·         MPLS protection switching.

·         MCE.

·         Static SR over MPLS.

ACL and QoS Command Reference

Covers the commands for classifying traffic with ACLs, and allocating network resources and managing congestions with QoS or hierarchical QoS (HQoS) technologies to improve network performance and network use efficiency.

This command reference includes:

·         ACL.

·         QoS.

·         MPLS QoS.

·         FR QoS.

·         Time range.

Security Command Reference

Covers security feature commands. Available security features include identity authentication (AAA), access security (802.1X, MAC authentication, and portal), secure management (SSH), SSL, and attack protection (IP source guard, ARP attack protection, and uRPF).

This command reference includes:

·         AAA.

·         802.1X.

·         MAC authentication.

·         Port security.

·         Portal.

·         User profile configuration.

·         Password control.

·         Keychain.

·         Public key configuration.

·         PKI.

·         Ipsec.

·         Group domain VPN.

·         SSH.

·         SSL.

·         SSL VPN.

·         ASPF.

·         ARP.

·         Session management.

·         Connection limit.

·         Object group.

·         Object policy.

·         Attack detection and prevention

·         IP source guard.

·         ARP attack protection.

·         uRPF.

·         Crypto engine.

·         FIPS.

·         mGRE.

Voice Command Reference

Covers the voice commands.

This command reference includes:

·         Voice interface.

·         Voice entity.

·         Dial program

·         SIP.

·         Call service.

·         Fax over IP.

·         SRST.

·         Customizable IVR.

WLAN FAT AP Command Reference

Covers the WLAN FAT AP commands.

This command reference includes:

·         Radio management.

·         WLAN radio resource measurement

·         Band navigation.

·         WLAN access.

·         WLAN security.

·         WLAN authentication.

·         WLAN QoS.

·         Cloud connection.

·         WLAN multicast optimization.

WLAN AC Command Reference

Covers the WLAN AC commands.

This command reference includes:

·         AP management.

·         Radio management.

·         WLAN access.

·         WLAN security.

·         WLAN authentication.

·         WIPS.

·         WLAN QoS.

·         WLAN roaming.

·         WLAN radio resource measurement.

·         Channel scanning.

·         Band navigation.

·         WLAN multicast optimization.

·         Cloud connection.

·         WLAN RRM.

·         WLAN IP snooping.

·         WLAN load balancing.

·         WLAN probe.

High Availability Command Reference

Covers high availability commands for managing failure detection and failover. Failure detection technologies focus on fault detection and isolation. Failover technologies focus on network recovery.

This command reference includes:

·         Interface backup.

·         CFD.

·         BFD.

·         Track.

·         VRRP.

·         Process placement.

·         DLDP.

Network Management and Monitoring Command Reference

Covers the commands that help you manage and monitor your network, for example, manage system events, collect traffic statistics, sample packets, assess network performance, and test network connectivity.

This command reference includes:

·         System maintenance and debugging  (ping, tracert, and system debugging).

·         NQA.

·         NTP.

·         PoE.

·         SNMP (including the MIB style configuration).

·         RMON.

·         Event MIB.

·         NETCONF.

·         CWMP.

·         EAA.

·         Process monitoring and maintenance.

·         Sampler.

·         Mirroring (including both port and traffic mirroring).

·         NetStream.

·         IPv6 NetStream.

·         sFlow.

·         Information Center.

·         Flow log.

·         Packet capture.

·         SmartMC.

OAA Command Reference

Covers the commands for logging in to an open application platform (OAP) card connected to your device and resetting the operating system of the OAP card. OAP cards use the open service architecture design, and enable you to provide custom services.

This command reference includes:

·         OAP.

EVI Command Reference

Covers EVI features.

This command reference includes:

·         EVI.

OpenFlow Command Reference

Covers OpenFlow features.

This command reference includes:

·         OpenFlow.

NEMO Command Reference

Covers NEMO features.

This command reference includes:

·         NEMO.

LISP Command Reference

Covers LISP features.

This command reference includes:

·         LISP.

DPI Command Reference

Covers DPI features.

This command reference includes:

·         DPI engine.

·         IPS.

·         URL filtering.

·         Bandwidth management.

VXLAN Command Reference

Covers VXLAN features.

This command reference includes:

·         VXLAN.

EVPN Command Reference

Covers EVPN features.

This command reference includes:

·         EVPN.