Use this MIB to configure information center settings, including enabling the information center or configuring log buffers and log hosts. You can access this MIB to obtain information about log entries in the log buffer.

MIB file name

hh3c-infocenter.mib

Root object

iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).hh3c(25506).hh3cCommon(2).hh3cInfoCenter(119)

Scalar objects

hh3cICMaxLogbufferSize (1.3.6.1.4.1.25506.2.119.1.1.1)

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cICMaxLogbufferSize (1.3.6.1.4.1.25506.2.119.1.1.1)	read-only	Unsigned32	Standard MIB values.	Maximum number of log entries that can be buffered.	As per the MIB.

hh3cICLogbufferSize (1.3.6.1.4.1.25506.2.119.1.1.2)

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cICLogbufferSize (1.3.6.1.4.1.25506.2.119.1.1.2)	read-write	Unsigned32	Standard MIB values.	Current buffer size.	As per the MIB.

hh3cICLogbufferCurrentMessages (1.3.6.1.4.1.25506.2.119.1.1.3)

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cICLogbufferCurrentMessages (1.3.6.1.4.1.25506.2.119.1.1.3)	read-only	Unsigned32	Standard MIB values.	Number of messages stored in the log buffer.	As per the MIB.

hh3cICLogbufferOverwrittenMessages (1.3.6.1.4.1.25506.2.119.1.1.4)

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cICLogbufferOverwrittenMessages (1.3.6.1.4.1.25506.2.119.1.1.4)	read-only	Counter32	Standard MIB values.	Number of overwritten messages in the log buffer.	As per the MIB.

hh3cICLogbufferDroppedMessages (1.3.6.1.4.1.25506.2.119.1.1.5)

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cICLogbufferDroppedMessages (1.3.6.1.4.1.25506.2.119.1.1.5)	read-only	Counter32	Standard MIB values.	Number of dropped messages in the log buffer.	As per the MIB.

hh3cICMaxLoghost (1.3.6.1.4.1.25506.2.119.2.1.1)

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cICMaxLoghost (1.3.6.1.4.1.25506.2.119.2.1.1)	read-only	Unsigned32	Standard MIB values.	Maximum number of log hosts supported by the information center.	As per the MIB.

hh3cICLoghostSourceInterface (1.3.6.1.4.1.25506.2.119.2.1.2)

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cICLoghostSourceInterface (1.3.6.1.4.1.25506.2.119.2.1.2)	read-write	InterfaceIndexOrZero	Standard MIB values.	Source interface through which log messages are sent to log hosts.	As per the MIB.

hh3cICLoghostTimestampType (1.3.6.1.4.1.25506.2.119.2.1.3)

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cICLoghostTimestampType (1.3.6.1.4.1.25506.2.119.2.1.3)

read-write

ICTimeStampType

date(0),

boot(1),

iso(2),

dateWithoutYear(3),

none(4),

isoWithTimezone(5),

dataWithMilliseconds(6),

isoWithMilliseconds(7),

isoWithMillisecondsAndTimezone(8)

Timestamp format for logs sent to log hosts.

Does not support boot(1).

isoWithTimezone(5), dataWithMilliseconds(6), isoWithMilliseconds(7), or isoWithMillisecondsAndTimezone(8).

hh3cICLogGlobalState (1.3.6.1.4.1.25506.2.119.5.1.1)

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cICLogGlobalState (1.3.6.1.4.1.25506.2.119.5.1.1)

read-write

TruthValue

true(1),

false(2)

Selects whether to enable the information center globally.

As per the MIB.

hh3cICLogTimestampType (1.3.6.1.4.1.25506.2.119.5.1.2)

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cICLogTimestampType (1.3.6.1.4.1.25506.2.119.5.1.2)	read-write	ICTimeStampType	date(0), boot(1), iso(2), dateWithoutYear(3), none(4), isoWithTimezone(5)	Timestamp format for log messages.	Supports only boot, date, and none.

hh3cICLogType (1.3.6.1.4.1.25506.2.119.5.4.1)

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cICLogType (1.3.6.1.4.1.25506.2.119.5.4.1)

accessible-for-notify

INTEGER

logfile(1),

diagfile(2),

secfile(3),

tracefile(4)

Log type.

As per the MIB.

hh3cICFailReason (1.3.6.1.4.1.25506.2.119.5.4.2)

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cICFailReason (1.3.6.1.4.1.25506.2.119.5.4.2)	accessible-for-notify	DisplayString	Standard MIB values.	Reason for write failure.	As per the MIB.

hh3cICLogFileName (1.3.6.1.4.1.25506.2.119.5.4.3)

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cICLogFileName (1.3.6.1.4.1.25506.2.119.5.4.3)	accessible-for-notify	DisplayString	Standard MIB values.	Name of the deleted log file.	As per the MIB.

Tabular objects

hh3cICLogbufferContTable

About this table

This table contains log buffer information.

Support for operations

Create：Not supported

Edit/Modify：Not supported

Delete：Not supported

Read：Supported

Columns

The table index is hh3cICLogbufferContIndex.

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cICLogbufferContIndex (1.3.6.1.4.1.25506.2.119.1.2.1.1)	not-accessible	Integer32	Integer32 (1..2147483647)	Table index.	As per the MIB.
hh3cICLogbufferContDescription (1.3.6.1.4.1.25506.2.119.1.2.1.2)	read-only	DisplayString	OCTET STRING (0..1600)	Content of the log buffer.	As per the MIB.

hh3cICLoghostTable

About this table

This table specifies a log host and configures output parameters, including IP address of the log host, VPN instance, logging facility, port number of the log host, and log output destination. You can also access this table to obtain log host-related information.

Support for operations

Create：Supported

Edit/Modify：Supported

Delete：Supported

Read：Supported

Columns

The table index is hh3cICLoghostIndex.

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cICLoghostIndex (1.3.6.1.4.1.25506.2.119.2.2.1.1)	not-accessible	Unsigned32	Unsigned32 (1..64)	Table index.	As per the MIB.
hh3cICLoghostIpaddressType (1.3.6.1.4.1.25506.2.119.2.2.1.2)	read-create	InetAddressType	unknown(0), ipv4(1), ipv6(2), ipv4z(3), ipv6z(4), dns(16)	Address type for the log host.	As per the MIB.
hh3cICLoghostIpaddress (1.3.6.1.4.1.25506.2.119.2.2.1.3)	read-create	InetAddress	OCTET STRING (0..255)	IP address of the log host.	As per the MIB.
hh3cICLoghostVPNName (1.3.6.1.4.1.25506.2.119.2.2.1.4)	read-create	DisplayString	OCTET STRING (0..255)	Name of the VPN instance to which the log host belongs.	As per the MIB.
hh3cICLoghostFacility (1.3.6.1.4.1.25506.2.119.2.2.1.5)	read-create	ICFacilityType	kernel(0), userLevel(1), mailSystem(2), systemDaemons(3), securityAuthorization(4), internallyMessages(5), linePrinter(6), networkNews(7), uucp(8), clockDaemon(9), securityAuthorization2(10), ftpDaemon(11), ntp(12), logAudit(13), logAlert(14), clockDaemon2(15), local0(16), local1(17), local2(18), local3(19), local4(20), local5(21), local6(22), local7(23)	Logging facility for marking different logging sources, and querying and filtering log messages.	Supports only local0(0), local1(1), local2(2), local3(3), local4(4), local5(5), local6(6), and local7(7).
hh3cICLoghostOperateRowStatus (1.3.6.1.4.1.25506.2.119.2.2.1.6)	read-create	RowStatus	active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)	Row status.	As per the MIB.
hh3cICLoghostIpaddressPort (1.3.6.1.4.1.25506.2.119.2.2.1.7)	read-create	Unsigned32	Unsigned32 (1..65535)	Port number of the log host.	As per the MIB.
hh3cICLoghostTAddress (1.3.6.1.4.1.25506.2.119.2.2.1.8)	read-create	TAddress	OCTET STRING (1..255)	IP address of the log host.	Supports only IPv4 addresses.

hh3cICDirectionTable

About this table

This table contains information about syslog output directions and specifies the enablement status of output directions.

Support for operations

Create：Not supported

Edit/Modify：Supported

Delete：Not supported

Read：Supported

Columns

The table index is hh3cICDirectionIndex.

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cICDirectionIndex (1.3.6.1.4.1.25506.2.119.3.1.1.1)	not-accessible	Unsigned32	Standard MIB values.	Table index.	As per the MIB.
hh3cICDirectionName (1.3.6.1.4.1.25506.2.119.3.1.1.2)	read-only	DisplayString	OCTET STRING (1..30)	Name of a log output destination.	As per the MIB.
hh3cICDirectionState (1.3.6.1.4.1.25506.2.119.3.1.1.3)	read-write	TruthValue	true(1), false(2)	Status of the log output destination.	Specifies whether to enable log output to the log buffer, log file, security log file, or diagnostic log file. Log output to other destinations than the above destinations are all enabled.

hh3cICModuleTable

About this table

This table contains available source modules.

Support for operations

Create：Not supported

Edit/Modify：Not supported

Delete：Not supported

Read：Supported

Columns

The table index is hh3cICModuleName.

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cICModuleName (1.3.6.1.4.1.25506.2.119.4.1.1.1)	read-only	DisplayString	OCTET STRING (1..8)	Name of a source module.	As per the MIB.

hh3cICLogTable

About this table

This table specifies the log level of log messages generated by a specific module to a specific output destination, and contains the log buffer information.

Support for operations

Create：The module name in a row cannot contain lowercase letters and cannot be default

Edit/Modify：A row with the source module named default cannot be deleted

Delete：Supported

Read：Supported

Columns

The table indexes are hh3cICDirectionIndex and hh3cICModuleName.

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cICLogLevel (1.3.6.1.4.1.25506.2.119.5.2.1.1)	read-create	ICMessageLevelType	emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), informational(6), debug(7), invalid(8)	Severity level of a log message.	As per the MIB.
hh3cICLogRowStatus (1.3.6.1.4.1.25506.2.119.5.2.1.2)	read-create	RowStatus	active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)	Row status.	As per the MIB.

Notifications

hh3cICLogWriteFail

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.119.5.3.0.1	Failed to write buffered logs to the log file.	Error	Major	N/A (N/A)	ON

Notification triggers

This notification is generated when the device fails to write logs in the buffer to the log file.

System impact

The latest log cannot be saved to the log file.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.119.5.4.1 (hh3cICLogType)	Log type.	N/A	INTEGER	Standard MIB values.
1.3.6.1.4.1.25506.2.119.5.4.2 (hh3cICFailReason)	Reason for write failure.	N/A	DisplayString	Standard MIB values.

Recommended action

Troubleshoot according to the failure reason carried in the trap. For example:

1.Execute the dir command in user view to display the current available space of the storage medium. If the storage space is not enough, use the delete /unreserved command to delete unused files permanently to release storage space.

2.If the storage medium becomes read-only due to a malfunction, please back up the files in the storage medium first, and then try to repair it using the fixdisk command.

3.If the write protection function is enabled, new logs cannot be written to the log file after the file is written to full capacity. At this time, you can disable write protection by using the undo info-center logfile overwrite-protection command.

4.If the issue persists, collect alarm information and configuration data, and then contact H3C Support for help.

hh3cICLogFileAging

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.119.5.3.0.2	Deleted the oldest compressed log file.	Informational	Warning	N/A (N/A)	ON

Notification triggers

This notification is generated when the device deletes the oldest compressed log file after all log files are full, and generates a new log file to save new logs. This notification is available for devices that support multiple log files.

System impact

The logs in the deleted log file are lost if the log file has no backup.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
(1.3.6.1.4.1.25506.2.119.5.4.3 hh3cICLogFileName)	Name of the deleted log file.	N/A	DisplayString	Standard MIB values.

Recommended action

1.As a best practice, back up the log files generated by the system periodically.

2.Execute the display logfile summary command and then identify the maximum storage space reserved for a single log file (the value of the Log file size quota field). To change the file size to a proper value, use the info-center logfile size-quota command.

03-Device Management

About this table

Support for operations

Columns

About this table

Support for operations

Columns

About this table

Support for operations

Columns

About this table

Support for operations

Columns

About this table

Support for operations

Columns

Basic information

Notification triggers

System impact

Status control

Object

Recommended action

Basic information

Notification triggers

System impact

Status control

Object

Recommended action

Intelligent Terminal Products

Product Support Services

Technical Service Solutions

Resource Center

Policy

Online Help

Become a Partner

Partner Policy & Program

Global Learning

Partner Sales Resources

Service Business

News & Events

Contact Us