Use this MIB to obtain entity extended information. Access this MIB to monitor specific entity data, which facilitates management and monitoring on the product through network management.

Products supporting this MIB must first support the ENTITY-MIB MIB.

The following tables show the relationship between the entity extended properties and device entities. Implementation varies by product.

Entity	hh3cEntityExtAdminStatus (R/W)
chassis	No
backplane	No
container	No
powerSupply	No
fan	No
sensor	No
module	No
port	Yes
stack	No
other	No
unknown	No

Entity	hh3cEntityExtOperStatus (R)
chassis	No
backplane	No
container	No
power Supply	Yes
fan	Yes
sensor	No
module	Yes
port	Yes
stack	No
other	No
unknown	No

Entity	hh3cEntityExtStandbyStatus (R)
chassis	No
backplane	No
container	No
powerSupply	No
fan	Yes
sensor	No
module	Yes
port	No
stack	No
other	No
unknown	No

Entity	hh3cEntityExtAlarmLight (R)
chassis	No
backplane	No
container	No
powerSupply	No
fan	No
sensor	No
module	No
port	No
stack	No
other	No
unknown	No

Entity	hh3cEntityExtCpuUsage (R)
chassis	No
backplane	No
container	No
powerSupply	No
fan	No
sensor	No
module	Yes(Only support the Module Level1)
port	No
stack	No
other	No
unknown	No

Entity	hh3cEntityExtCpuUsageThreshold (R/W)
chassis	No
backplane	No
container	No
powerSupply	No
fan	No
sensor	No
module	Yes(Only support the Module Level1)
port	No
stack	No
other	No
unknown	No

Entity	hh3cEntityExtMemUsage (R)
chassis	No
backplane	No
container	No
powerSupply	No
fan	No
sensor	No
module	Yes(Only support the Module Level1)
port	No
stack	No
other	No
unknown	No

Entity	hh3cEntityExtMemUsageThreshold(R/W)
chassis	No
backplane	No
container	No
powerSupply	No
fan	No
sensor	No
module	Yes(Only support the Module Level1)
port	No
stack	No
other	No
unknown	No

Entity	hh3cEntityExtMemSize (R)
chassis	No
backplane	No
container	No
powerSupply	No
fan	No
sensor	No
module	Yes(Only support the Module Level1)
port	No
stack	No
other	No
unknown	No

Entity	hh3cEntityExtUpTime (R)
chassis	Yes
backplane	No
container	No
powerSupply	No
fan	No
sensor	No
module	No
port	No
stack	No
other	No
unknown	No

Entity	hh3cEntityExtTemperature (R)
chassis	No
backplane	No
container	No
powerSupply	Yes
fan	Yes
sensor	Yes
module	Yes
port	No
stack	No
other	Yes
unknown	No

Entity	hh3cEntityExtTemperatureThreshold(R/W)
chassis	No
backplane	No
container	No
powerSupply	Yes
fan	Yes
sensor	Yes
module	Yes
port	No
stack	No
other	Yes
unknown	No

Entity	hh3cEntityExtVoltage(R)
chassis	No
backplane	No
container	No
powerSupply	No
fan	No
sensor	No
module	No
port	No
stack	No
other	No
unknown	No

Entity	hh3cEntityExtVoltageLowThreshold(R/W)
chassis	No
backplane	No
container	No
powerSupply	No
fan	No
sensor	No
module	No
port	No
stack	No
other	No
unknown	No

Entity	hh3cEntityExtVoltageHighThreshold(R/W)
chassis	No
backplane	No
container	No
powerSupply	No
fan	No
sensor	No
module	No
port	No
stack	No
other	No
unknown	No

Entity	hh3cEntityExtCriticalTemperatureThreshold(R/W)
chassis	No
backplane	No
container	No
powerSupply	No
fan	No
sensor	Yes
module	No
port	No
stack	No
other	No
unknown	No

Entity	hh3cEntityExtMacAddress (R)
chassis	Yes
backplane	No
container	No
powerSupply	No
fan	No
sensor	No
module	No
port	No
stack	Yes
other	No
unknown	No

Entity	hh3cEntityExtErrorStatus (R)
chassis	No
backplane	Yes
container	Yes
powerSupply	Yes
fan	Yes
sensor	Yes
module	No
port	Yes
stack	No
other	Yes
unknown	Yes

Entity	hh3cEntityExtManuSerialNum (R)
chassis	Yes
backplane	No
container	No
powerSupply	No
fan	No
sensor	No
module	Yes
port	No
cpu	No

Entity	hh3cEntityExtManuBuildInfo (R)
chassis	Yes
backplane	No
container	No
powerSupply	No
fan	No
sensor	No
module	Yes
port	No
cpu	No

Entity	hh3cEntityExtMacAddressCount (R)
chassis	Yes
backplane	No
container	No
powerSupply	No
fan	No
sensor	No
module	Yes
port	Yes
cpu	No

Entity	hh3cEntityExtManuBOM (R)
chassis	Yes
backplane	No
container	No
powerSupply	No
fan	No
sensor	No
module	Yes
port	No
cpu	No

Entity (R/W: Read/Write)	POWERSUPPLY	FAN	CHASSIS	CONTAINER	MODULE	PORT	CPU
hh3cEntityExtAdminStatus (R/W)						Yes
hh3cEntityExtOperStatus (R)	Yes	Yes			Yes	Yes
hh3cEntityExtStandbyStatus (R)		Yes			Yes
hh3cEntityExtAlarmLight (R)
hh3cEntityExtCpuUsage (R)					Yes
hh3cEntityExtCpuUsageThreshold (R/W)					Yes
hh3cEntityExtMemUsage (R)					Yes
hh3cEntityExtMemUsageThreshold(R/W)					Yes
hh3cEntityExtMemSize (R)					Yes
hh3cEntityExtUpTime (R)			Yes
hh3cEntityExtTemperature (R)
hh3cEntityExtTemperatureThreshold (R/W)
hh3cEntityExtVoltage (R)
hh3cEntityExtVoltageLowThreshold (R/W)
hh3cEntityExtVoltageHighThreshold (R/W)
hh3cEntityExtCriticalTemperatureThreshold
hh3cEntityExtMacAddress			Yes
hh3cEntityExtErrorStatus

NOTE:

· Yes indicates that the extended property is supported.

· If the read operation returns no such name/instance, the object is not supported in the current entity instance.

Root object

iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).hh3c(25506).hh3cCommon(2).hh3cEntityExtend(6)

Scalar objects

hh3cEntityExtTrapDescription (1.3.6.1.4.1.25506.2.6.2.1.1)

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cEntityExtTrapDescription (1.3.6.1.4.1.25506.2.6.2.1.1)	accessible-for-notify	SnmpAdminString	OCTET STRING(0..255)	Detailed information of the trap.	As per the MIB.

hh3cEntityExtECCParityAlarmStatus (1.3.6.1.4.1.25506.2.6.2.1.2)

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cEntityExtECCParityAlarmStatus (1.3.6.1.4.1.25506.2.6.2.1.2)

accessible-for-notify

INTEGER

other(1),

l1cache(2),

l2cache(3),

sdram(4),

mac(5),

tcam(6),

ingressbuffer(7),

egressbuffer(8),

lpm(9),

controlmemory(10)

Resource type of the chip on which an ECC error or parity check error occurs.

As per the MIB.

hh3cEntityExtSFPInvalidInDays (1.3.6.1.4.1.25506.2.6.2.1.3)

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cEntityExtSFPInvalidInDays (1.3.6.1.4.1.25506.2.6.2.1.3)	accessible-for-notify	Integer32	Standard MIB values.	Remaining valid days of a transceiver module.	As per the MIB.

hh3cEntityExtFirstTrapTime (1.3.6.1.4.1.25506.2.6.2.1.4)

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cEntityExtFirstTrapTime (1.3.6.1.4.1.25506.2.6.2.1.4)	accessible-for-notify	TimeTicks	Standard MIB values.	Time when a trap is sent for the first time.	As per the MIB.

hh3cEntityExtRelativeLocation (1.3.6.1.4.1.25506.2.6.2.1.5)

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cEntityExtRelativeLocation (1.3.6.1.4.1.25506.2.6.2.1.5)	accessible-for-notify	OCTET STRING	OCTET STRING (SIZE (0..255))	Entity location information.	As per the MIB.

hh3cEntityExtServiceName (1.3.6.1.4.1.25506.2.6.2.1.6)

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cEntityExtServiceName (1.3.6.1.4.1.25506.2.6.2.1.6)	accessible-for-notify	OCTET STRING	OCTET STRING (SIZE (1..255))	Service name.	As per the MIB.

hh3cEntityExtRelativeResource (1.3.6.1.4.1.25506.2.6.4.1.1)

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cEntityExtRelativeResource (1.3.6.1.4.1.25506.2.6.4.1.1)	accessible-for-notify	OCTECT STRING	OCTET STRING (SIZE (0..255))	Entity location information.	As per the MIB.

hh3cEntityExtErrorCode (1.3.6.1.4.1.25506.2.6.4.1.2)

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cEntityExtErrorCode (1.3.6.1.4.1.25506.2.6.4.1.2)	accessible-for-notify	Integer32	Standard MIB values.	Error code.	As per the MIB.

hh3cEntityExtReason (1.3.6.1.4.1.25506.2.6.4.1.3)

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cEntityExtReason (1.3.6.1.4.1.25506.2.6.4.1.3)	accessible-for-notify	OCTECT STRING	OCTET STRING (SIZE (0..255))	Failure reason description.	As per the MIB.

hh3cEntityExtThresholdType (1.3.6.1.4.1.25506.2.6.4.1.4)

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cEntityExtThresholdType (1.3.6.1.4.1.25506.2.6.4.1.4)	accessible-for-notify	OCTECT STRING	OCTET STRING (SIZE (0..63))	Threshold type.	As per the MIB.

hh3cEntityExtThresholdVal (1.3.6.1.4.1.25506.2.6.4.1.5)

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cEntityExtThresholdVal (1.3.6.1.4.1.25506.2.6.4.1.5)	accessible-for-notify	OCTECT STRING	OCTET STRING (SIZE (0..63))	Threshold value.	As per the MIB.

hh3cEntityExtCurrentVal (1.3.6.1.4.1.25506.2.6.4.1.6)

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cEntityExtCurrentVal (1.3.6.1.4.1.25506.2.6.4.1.6)	accessible-for-notify	OCTECT STRING	OCTET STRING (SIZE (0..63))	Current value.	As per the MIB.

Tabular objects

hh3cEntityExtStateTable

About this table

This table contains information about entity extended properties, including administrative status, operation status, CPU usage, CPU usage threshold, memory usage, and memory usage threshold.

Support for operations

Create：Not supported

Edit/Modify：Supported

Delete：Not supported

Read：Supported

Columns

The table index is hh3cEntityExtPhysicalIndex.

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cEntityExtPhysicalIndex (1.3.6.1.4.1.25506.2.6.1.1.1.1.1)	accessible-for-notify	Integer32	Integer32 (1..2147483647)	The index for this entry, which is the same with the value of entPhysicalIndex in ENTITY-MIB.	As per the MIB.
hh3cEntityExtAdminStatus (1.3.6.1.4.1.25506.2.6.1.1.1.1.2)	read-write	Hh3cAdminState	notSupported(1), locked(2), shuttingDown(3), unlocked(4)	Administrative status for this object.	Does not support notSupported(1) or shuttingDown(3). locked—The resource is disabled. shuttingDown—The resource is available only the current entity. unlocked—The resource is not disabled.
hh3cEntityExtOperStatus (1.3.6.1.4.1.25506.2.6.1.1.1.1.3)	read-only	Hh3cOperState	notSupported(1), disabled(2), enabled(3), dangerous(4)	Operation status	disabled—The resource is not operable. enabled—The resource or part of the resource is operable.
hh3cEntityExtStandbyStatus (1.3.6.1.4.1.25506.2.6.1.1.1.1.4)	read-only	Hh3cStandbyStatus	notSupported(1), hotStandby(2), coldStandby(3), providingService(4)	Standby status.	notStandby—The resource is not providing services, but it can provide services without being initialized. The resource in this status also contains information about the resources being backed up. coldStandby—The resource is not providing services, but it can operate. providingService—The resource is providing services.
hh3cEntityExtAlarmLight (1.3.6.1.4.1.25506.2.6.1.1.1.1.5)	read-only	Hh3cAlarmStatus	BITS { notSupported(0), underRepair(1), critical(2), major(3), minor(4), alarmOutstanding(5), warning(6), indeterminate(7) }	Alarm status for this entity.	Not supported. An integer indicates an alarm status as follows: 0—notSupported. This indicates that none of the subsequent statuses is present. 1—underRepair. This indicates that the resource is being repaired. 2—critical. This indicates that one or multiple critical faults occurred on the resource. 3—major. This indicates that one or multiple major faults occurred on the resource. 4—minor. This indicates that one or multiple minor faults occurred on the resource. 5—alarmOutstanding. This indicates that one or multiple alarms occurred on the resource and might cause system interruption. 6—warning. This indicates that one or multiple warning faults occurred on the resource. 7—indeterminate. This indicates that one or multiple indeterminate faults occurred on the resource.
hh3cEntityExtCpuUsage (1.3.6.1.4.1.25506.2.6.1.1.1.1.6)	read-only	Integer32	Integer32 (0..100)	CPU usage for this entity. The statistics interval for CPU usage is 5 seconds.	As per the MIB.
hh3cEntityExtCpuUsageThreshold (1.3.6.1.4.1.25506.2.6.1.1.1.1.7)	read-write	Integer32	Integer32 (0..100)	CPU usage alarm threshold in percentage. Value range: 1 to 100.	As per the MIB.
hh3cEntityExtMemUsage (1.3.6.1.4.1.25506.2.6.1.1.1.1.8)	read-only	Integer32	Integer32 (0..100)	Memory usage for this entity in percentage.	As per the MIB.
hh3cEntityExtMemUsageThreshold (1.3.6.1.4.1.25506.2.6.1.1.1.1.9)	read-write	Integer32	Integer32 (0..100)	Memory usage alarm threshold in percentage.	As per the MIB.
hh3cEntityExtMemSize (1.3.6.1.4.1.25506.2.6.1.1.1.1.10)	read-only	Unsigned32	Unsigned32 (0..4294967295)	Memory size for this entity, in bytes. The memory is a 32-bit wide memory.	As per the MIB.
hh3cEntityExtUpTime (1.3.6.1.4.1.25506.2.6.1.1.1.1.11)	read-only	Integer32	Integer32 (-2147483648..2147483647)	Uptime for the entity., in seconds.	As per the MIB.
hh3cEntityExtTemperature (1.3.6.1.4.1.25506.2.6.1.1.1.1.12)	read-only	Integer32	Integer32 (-2147483648..2147483647)	Temperature of the entity.	Implementation varies by product. The value 65535 indicates that the object is not supported.
hh3cEntityExtTemperatureThreshold (1.3.6.1.4.1.25506.2.6.1.1.1.1.13)	read-write	Integer32	Integer32 (-2147483648..2147483647)	Temperature of the entity.	Implementation varies by product. The value 65535 indicates that the object is not supported.
hh3cEntityExtCriticalTemperatureThreshold (1.3.6.1.4.1.25506.2.6.1.1.1.1.17)	read-write	Integer32	Integer32 (-2147483648..2147483647)	Critical high-temperature threshold for the entity.	Implementation varies by product. The value 65535 indicates that the object is not supported.
hh3cEntityExtMacAddress (1.3.6.1.4.1.25506.2.6.1.1.1.1.18)	read-only	MacAddress	OCTET STRING (6)	MAC address of the entity.	If the type of the entity is stack, the value of this object is bridge MAC address of the current device. If this object is not supported in the current entity instance, the value of this object is fixed at 00.00.00.00.00.00.
hh3cEntityExtErrorStatus (1.3.6.1.4.1.25506.2.6.1.1.1.1.19)	read-only	INTEGER	notSupported(1), normal(2), postFailure(3), entityAbsent(4), poeError(11), stackError(21), stackPortBlocked(22), stackPortFailed(23), sfpRecvError(31), sfpSendError(32), sfpBothError(33), sfpRecvExceedUpperLimit(34), sfpRecvBelowLowerLimit(35), sfpSendExceedUpperLimit(36), sfpSendBelowLowerLimit(37), fanError(41), psuError(51), rpsError(61), moduleFaulty(71), sensorError(81), hardwareFaulty(91)	Alarm status for the entity, which is a supplement to hh3cEntityExtOperStatus.	notSupported(1)—The entity does not support this object. normal(2)—The entity is normal. For ports, the object does not differentiate 10 Mbps, 100 Mbps, 1000 Mbps, duplex or half duplex ports. For fans, power supplies, cards, SFP ports, and stack ports, the object indicates they are normal. postFailure(3)—The entity fails during POST. entityAbsent(4)—The entity is absent. poeError(11)—A power supply fault occurs on the PoE port. stackError(21)—An issue occurs on the stack port during the stacking process. stackPortBlocked(22)—The stack port is in standby status in the resilient daisy chain. stackPortFailed(23)—The stacking process fails on a stack port after the stacking is enabled on the stack port. sfpRecvError(31)—A fault occurs in the inbound direction of an SFP port. sfpSendError(32)—A fault occurs in the outbound direction of an SFP port. sfpBothError(33)—A fault occurs in both the inbound and outbound directions of an SFP port. sfpRecvExceedUpperLimit—The SFP receive power exceeds the upper limit. sfpRecvBelowLowerLimit—The SFP receive power falls below the lower limit. sfpSendExceedUpperLimit—The SFP transmit power exceeds the upper limit. sfpSendBelowLowerLimit—The SFP receive power falls below the lower limit. fanError(41)—A fan fault is present. psuError(51)—A power supply fault is present. rpsError(61)—An RPS fault is present. moduleFaulty(71)— A card fault is present. sensorError(81)—A sensor fault is present. hardwareFaulty(91)—A hardware fault occurs on the entity.
hh3cEntityExtCpuMaxUsage (1.3.6.1.4.1.25506.2.6.1.1.1.1.20)	read-only	Integer32	Integer32 (0..100)	Peak CPU usage during the most recent 1-minute interval.	As per the MIB.
hh3cEntityExtLowerTemperatureThreshold (1.3.6.1.4.1.25506.2.6.1.1.1.1.21)	read-write	Integer32	Integer32 (-2147483648..2147483647)	Low-temperature threshold for the entity.	Implementation varies by product. The value 65535 indicates that the object is not supported.
hh3cEntityExtShutdownTemperatureThreshold (1.3.6.1.4.1.25506.2.6.1.1.1.1.22)	read-write	Integer32	Integer32 (-2147483648..2147483647)	Shutdown temperature threshold. Notifies and shuts down the device when the threshold is reached.	Implementation varies by product. The value 65535 indicates that the object is not supported.
hh3cEntityExtPhyMemSize (1.3.6.1.4.1.25506.2.6.1.1.1.1.23)	read-only	Unsigned32	Unsigned32 (0..4294967295)	Memory size for this entity, in bytes. The memory is a 32-bit wide memory.	As per the MIB.
hh3cEntityExtFirstUsedDate (1.3.6.1.4.1.25506.2.6.1.1.1.1.25)	read-only	DateAndTime	OCTET STRING (8)	The date used for the first on the entity.	Implementation varies by product.
hh3cEntityExtCpuAvgUsage (1.3.6.1.4.1.25506.2.6.1.1.1.1.26)	read-only	Integer32	Integer32 (0..100)	Average CPU usage for the entity during a time period.	As per the MIB.
hh3cEntityExtMemAvgUsage (1.3.6.1.4.1.25506.2.6.1.1.1.1.27)	read-only	Integer32	Integer32 (0..100)	Average memory usage for the entity during a time period.	As per the MIB.
hh3cEntityExtCpuUsageRecoverThreshold(1.3.6.1.4.1.25506.2.6.1.1.1.1.31)	read-write	Integer32	Integer32 (0..100)	CPU usage recovery threshold for the entity.	Not supported
hh3cEntityExtMemSizeRev (1.3.6.1.4.1.25506.2.6.1.1.1.1.32)	read-only	Counter64	Counter64 (0..18446744073709551615)	Memory size for this entity, in bytes. The memory is a 64-bit wide memory.	As per the MIB.
hh3cEntityExtCpuUsageIn1Minute(1.3.6.1.4.1.25506.2.6.1.1.1.1.33)	read-only	Integer32	Integer32 (0..100)	Average CPU usage for the entity during the most recent 1-minute interval.	As per the MIB.
hh3cEntityExtCpuUsageIn5Minutes(1.3.6.1.4.1.25506.2.6.1.1.1.1.34)	read-only	Integer32	Integer32 (0..100)	Average CPU usage for the entity during the most recent 5-minute interval.	As per the MIB.

hh3cEntityExtManuTable

About this table

This table contains manufacturing information about device entities.

Support for operations

Create：Not supported

Edit/Modify：Not supported

Delete：Not supported

Read：Supported

Columns

The table index is hh3cEntityExtManuPhysicalIndex.

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cEntityExtManuPhysicalIndex (1.3.6.1.4.1.25506.2.6.1.2.1.1.1)	accessible-for-notify	PhysicalIndex	Integer32 (1..2147483647)	Entity index.	As per the MIB.
hh3cEntityExtManuSerialNum (1.3.6.1.4.1.25506.2.6.1.2.1.1.2)	read-only	SnmpAdminString	OCTET STRING (0..255)	Serial number of the entity.	As per the MIB.
hh3cEntityExtManuBuildInfo (1.3.6.1.4.1.25506.2.6.1.2.1.1.3)	read-only	SnmpAdminString	OCTET STRING (0..255)	Version of the entity.	As per the MIB.
hh3cEntityExtManuBOM (1.3.6.1.4.1.25506.2.6.1.2.1.1.4)	read-only	SnmpAdminString	OCTET STRING (0..255)	BOM number of the entity.	As per the MIB.
hh3cEntityExtMacAddressCount (1.3.6.1.4.1.25506.2.6.1.2.1.1.5)	read-only	Unsigned32	Unsigned32 (0..4294967295)	MAC address count for the entity.	As per the MIB.

hh3cEntityExtPowerTable

About this table

This table contains power information about all entities on the device.

Support for operations

Create：Not supported

Edit/Modify：Supported

Delete：Not supported

Read：Supported

Columns

The table index is hh3cEntityExtPowerPhysicalIndex.

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cEntityExtPowerPhysicalIndex (1.3.6.1.4.1.25506.2.6.1.3.1.1.1)	accessible-for-notify	PhysicalIndex	Integer32 (1..2147483647)	Entity index for the power supply.	As per the MIB.
hh3cEntityExtNominalPower (1.3.6.1.4.1.25506.2.6.1.3.1.1.2)	read-only	Gauge32	Gauge32 (0..4294967295)	Rated power for the entity, in milliwatts.	As per the MIB.
hh3cEntityExtCurrentPower (1.3.6.1.4.1.25506.2.6.1.3.1.1.3)	read-only	Gauge32	Gauge32 (0..4294967295)	Current power for the entity, in milliwatts.	As per the MIB.
hh3cEntityExtAveragePower (1.3.6.1.4.1.25506.2.6.1.3.1.1.4)	read-write	Gauge32	Gauge32 (0..4294967295)	Average power consumed by the entity, in milliwatts. The value 0 is the only valid value, indicating that the system clears the existing records and restarts the power statistics. The other values for this object will not take effect.	As per the MIB.
hh3cEntityExtPeakPower (1.3.6.1.4.1.25506.2.6.1.3.1.1.5)	read-write	Integer32	Integer32 (-2147483648..2147483647)	Maximum power for the entity, in milliwatts. The value 0 is the only valid value, indicating that the system clears the existing records and restarts the power statistics. The other values for this object will not take effect.	As per the MIB.

hh3cProcessTable

About this table

This table contains process information.

Support for operations

Create：Not supported

Edit/Modify：Not supported

Delete：Not supported

Read：Supported

Columns

The table index is hh3cProcessID.

Object (OID)	Access	Syntax	Value range	Description	Implementation
hh3cProcessID (1.3.6.1.4.1.25506.2.6.1.4.1.1.1)	read-only	Unsigned32	Unsigned32 (0..4294967295)	Process ID.	As per the MIB.
hh3cProcessName (1.3.6.1.4.1.25506.2.6.1.4.1.1.2)	read-only	DisplayString	OCTET STRING (1..32)	Process name.	As per the MIB.
hh3cProcessUtil5Min (1.3.6.1.4.1.25506.2.6.1.4.1.1.3)	read-only	Unsigned32	Unsigned32 (0..100)	CPU usage of the process during a 5-minute interval.	As per the MIB.

Notifications

hh3cEntityExtTemperatureThresholdNotification

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.2.0.1	Temperature of an entity exceeding the threshold	Error notification	Major	1.3.6.1.4.1.25506.2.6.2.0.22 (hh3cEntityExtTemperatureNormal)	ON

Notification triggers

This notification is generated when the temperature of an entity exceeds the upper limit.

System impact

Too high temperature affects normal operation of the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.1.1.1.12 (hh3cEntityExtTemperature)	Temperature of the entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.1.1.1.13 (hh3cEntityExtTemperatureThreshold)	Temperature threshold for the entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.1.1.1.2 (hh3cEntityExtAdminStatus)	Administrative status of the entity.	hh3cEntityExtPhysicalIndex	Hh3cAdminState	notSupported(1), locked(2), shuttingDown(3), unlocked(4)}
1.3.6.1.4.1.25506.2.6.1.1.1.1.5 (hh3cEntityExtAlarmLight)	Alarm status of the entity.	hh3cEntityExtPhysicalIndex	Hh3cAlarmStatus	BITS {, notSupported(0), underRepair(1), critical(2), major(3), minor(4), alarmOutstanding(5), warning(6), indeterminate(7), }

Recommended action

1.Verify that the temperature of the environment is normal. Execute the display environment command to obtain temperature information, including the current temperature and the temperature thresholds.

2.Identify the reason why the temperature exceeded the upper limit.

3.Verify that the temperature has dropped back to the normal.

4.If the issue persists, contact H3C Support.

hh3cEntityExtVoltageLowThresholdNotification

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.2.0.2	The voltage is lower than the low-voltage threshold.	Error	Major	N/A (N/A)	ON

Notification triggers

This notification is generated when the voltage of an entity is lower than the low-voltage threshold.

System impact

The entity will be shut down.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Index of an entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.1.1.1.14 (hh3cEntityExtVoltage)	Voltage for the entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.1.1.1.15 (hh3cEntityExtVoltageLowThreshold)	Low-voltage threshold for the entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.1.1.1.2 (hh3cEntityExtAdminStatus)	Administrative status of the entity.	hh3cEntityExtPhysicalIndex	Hh3cAdminState	notSupported(1), locked(2), shuttingDown(3), unlocked(4)}
1.3.6.1.4.1.25506.2.6.1.1.1.1.5 (hh3cEntityExtAlarmLight)	Alarm status of the entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.

Recommended action

Check the voltage and resolve the issue.

hh3cEntityExtVoltageHighThresholdNotification

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.2.0.3	The voltage is higher than the high-voltage threshold.	Error	Major	N/A (N/A)	ON

Notification triggers

This notification is generated when the voltage of an entity is higher than the high-voltage threshold.

System impact

The entity might be damaged.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Index of an entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.1.1.1.14 (hh3cEntityExtVoltage)	Voltage for the entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.1.1.1.15 (hh3cEntityExtVoltageHighThreshold)	High-voltage threshold for the entity.	hh3cEntityExtPhysicalIndex	Integer32	Implementation varies by product.
1.3.6.1.4.1.25506.2.6.1.1.1.1.2 (hh3cEntityExtAdminStatus)	Administrative status of the entity.	hh3cEntityExtPhysicalIndex	Hh3cAdminState	notSupported(1), locked(2), shuttingDown(3), unlocked(4)}
1.3.6.1.4.1.25506.2.6.1.1.1.1.5 (hh3cEntityExtAlarmLight)	Alarm status of the entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.

Recommended action

Check the voltage and resolve the issue.

hh3cEntityExtCpuUsageThresholdNotfication

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.2.0.4	CPU usage of an entity exceeding the threshold	Error notification	Major	1.3.6.1.4.1.25506.2.6.2.0.25 (hh3cEntityExtCpuUsageThresholdRecover)	ON

Notification triggers

This notification is generated when the CPU usage of an entity exceeds the threshold. The notification is sent every 60 seconds till the alarm is cleared.

System impact

The service processing capacity of the system will be reduced.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.1.1.1.6 (hh3cEntityExtCpuUsage)	CPU usage of the entity.	hh3cEntityExtPhysicalIndex	Integer32	0..100
1.3.6.1.4.1.25506.2.6.1.1.1.1.7 (hh3cEntityExtCpuUsageThreshold)	CPU usage threshold for the entity.	hh3cEntityExtPhysicalIndex	Integer32	0..100
1.3.6.1.4.1.25506.2.6.1.1.1.1.2 (hh3cEntityExtAdminStatus)	Administrative status of the entity.	hh3cEntityExtPhysicalIndex	Hh3cAdminState	notSupported(1), locked(2), shuttingDown(3), unlocked(4)}
1.3.6.1.4.1.25506.2.6.1.1.1.1.5 (hh3cEntityExtAlarmLight)	Alarm status of the entity.	hh3cEntityExtPhysicalIndex	Hh3cAlarmStatus	BITS {, notSupported(0), underRepair(1), critical(2), major(3), minor(4), alarmOutstanding(5), warning(6), indeterminate(7), }
1.3.6.1.4.1.25506.2.6.1.1.1.1.31 (hh3cEntityExtCpuUsageRecoverThreshold)	CPU usage recovery threshold for the entity.	hh3cEntityExtPhysicalIndex	Integer32	0..100
1.3.6.1.4.1.25506.2.6.2.1.4 (hh3cEntityExtFirstTrapTime)	Timestamp at which the notification is sent for the first time.	N/A	TimeTicks	Standard MIB values.

Recommended action

1.If the alarm is automatically cleared, no action is required.

2.If the alarm cannot be automatically cleared, contact H3C Support.

hh3cEntityExtMemUsageThresholdNotification

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.2.0.5	Memory usage of an entity exceeding the threshold	Error notification	Major	1.3.6.1.4.1.25506.2.6.2.0.26 (hh3cEntityExtMemUsageThresholdRecover)	ON

Notification triggers

This notification is generated when the memory usage of an entity that has a total memory size less than 4 GB exceeds the threshold (hh3cEntityExtMemUsageThreshold). The notification is sent every 60 seconds till the alarm is cleared.

An hh3cEntityExtMemUsageThresholdOverTrap notification is generated when the memory usage of an entity that has a total memory size equal to or larger than 4 GB exceeds the threshold (hh3cEntityExtMemUsageThreshold).

System impact

The available memory size is reduced, which might affect the service processing capacity of the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.1.1.1.8 (hh3cEntityExtMemUsage)	Memory usage of the entity.	hh3cEntityExtPhysicalIndex	Integer32	0..100
1.3.6.1.4.1.25506.2.6.1.1.1.1.9 (hh3cEntityExtMemUsageThreshold)	Memory usage threshold for the entity.	hh3cEntityExtPhysicalIndex	Integer32	0..100
1.3.6.1.4.1.25506.2.6.1.1.1.1.10 (hh3cEntityExtMemSize)	Memory size of the entity.	hh3cEntityExtPhysicalIndex	Unsigned32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.1.1.1.2 (hh3cEntityExtAdminStatus)	Administrative status of the entity.	hh3cEntityExtPhysicalIndex	Hh3cAdminState	notSupported(1), locked(2), shuttingDown(3), unlocked(4)}
1.3.6.1.4.1.25506.2.6.1.1.1.1.5 (hh3cEntityExtAlarmLight)	Alarm status of the entity.	hh3cEntityExtPhysicalIndex	Hh3cAlarmStatus	BITS {, notSupported(0), underRepair(1), critical(2), major(3), minor(4), alarmOutstanding(5), warning(6), indeterminate(7), }
1.3.6.1.4.1.25506.2.6.2.1.4 (hh3cEntityExtFirstTrapTime)	Timestamp at which the notification is sent for the first time.	N/A	TimeTicks	Standard MIB values.

Recommended action

1.Delete unused services to reduce memory consumption.

2.If the alarm is automatically cleared, no action is required. If the alarm cannot be automatically cleared, contact H3C Support.

hh3cEntityExtOperEnabled

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.2.0.6	An entity becomes operable.	Recovery	Warning	N/A (N/A)	ON

Notification triggers

This notification is generated when an entity becomes operable.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.1.1.1.2 (hh3cEntityExtAdminStatus)	Administrative status of the entity.	hh3cEntityExtPhysicalIndex	Hh3cAdminState	notSupported(1), locked(2), shuttingDown(3), unlocked(4)}
1.3.6.1.4.1.25506.2.6.1.1.1.1.5 (hh3cEntityExtAlarmLight)	Alarm status of the entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.

Recommended action

No action is required.

hh3cEntityExtOperDisabled

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.2.0.7	An entity becomes inoperable.	Recovery	Warning	N/A (N/A)	ON

Notification triggers

This notification is generated when an entity becomes inoperable due to a failure.

System impact

The system is inoperable.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.1.1.1.2 (hh3cEntityExtAdminStatus)	Administrative status of the entity.	hh3cEntityExtPhysicalIndex	Hh3cAdminState	notSupported(1), locked(2), shuttingDown(3), unlocked(4)}
1.3.6.1.4.1.25506.2.6.1.1.1.1.5 (hh3cEntityExtAlarmLight)	Alarm status of the entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.

Recommended action

1.Locate the reason that causes the issue and resolve the issue accordingly.

2.If the issue persists, contact H3C Support.

hh3cEntityExtCriticalTemperatureThresholdNotification

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.2.0.8	Temperature of an entity exceeding the critical high-temperature threshold	Error notification	Critical	1.3.6.1.4.1.25506.2.6.2.0.22 (hh3cEntityExtTemperatureNormal)	ON

Notification triggers

This notification is generated when the temperature of an entity exceeded the critical high-temperature threshold. The notification is sent every 80 seconds till the alarm is cleared.

System impact

The high temperature affects normal operation of the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.1.1.1.12 (hh3cEntityExtTemperature)	Temperature of the entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.1.1.1.17 (hh3cEntityExtCriticalTemperatureThreshold)	Critical high-temperature threshold for the entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.1.1.1.2 (hh3cEntityExtAdminStatus)	Administrative status of the entity.	hh3cEntityExtPhysicalIndex	Hh3cAdminState	notSupported(1), locked(2), shuttingDown(3), unlocked(4)}
1.3.6.1.4.1.25506.2.6.1.1.1.1.5 (hh3cEntityExtAlarmLight)	Alarm status of the entity.	hh3cEntityExtPhysicalIndex	Hh3cAlarmStatus	BITS {, notSupported(0), underRepair(1), critical(2), major(3), minor(4), alarmOutstanding(5), warning(6), indeterminate(7), }

Recommended action

2.Identify the reason why the temperature exceeded the critical high-temperature threshold.

3.Verify that the temperature has dropped back to the normal.

4.If the issue persists, contact H3C Support.

hh3cEntityExtSFPAlarmOn

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.2.0.9	An error was detected on a transceiver module entity	Error	Major	1.3.6.1.4.1.25506.2.6.2.0.10 (hh3cEntityExtSFPAlarmOff)	ON

Notification triggers

This notification is generated when an error is detected on a transceiver module.

System impact

The transceiver module on which the error was detected is unavailable.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.1.1.1.2 (hh3cEntityExtAdminStatus)	Entity admin status.	hh3cEntityExtPhysicalIndex	Hh3cAdminState	notSupported(1), locked(2), shuttingDown(3), unlocked(4)}
1.3.6.1.4.1.25506.2.6.1.1.1.1.5 (hh3cEntityExtAlarmLight)	Entity alarm status.	hh3cEntityExtPhysicalIndex	Hh3cAlarmStatus	BITS {, notSupported(0), underRepair(1), critical(2), major(3), minor(4), alarmOutstanding(5), warning(6), indeterminate(7), }
1.3.6.1.4.1.25506.2.6.1.1.1.1.19 (hh3cEntityExtErrorStatus)	Entity error status.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.

Recommended action

1.Examine the transceiver module for errors.

2.If the issue persists, contact H3C Support.

hh3cEntityExtSFPAlarmOff

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.2.0.10	The error on the transceiver module entity was removed	Recovery	Major	N/A (N/A)	ON

Notification triggers

This notification is generated when a transceiver module recovers.

System impact

No negative impact on services.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.1.1.1.2 (hh3cEntityExtAdminStatus)	Entity admin status.	hh3cEntityExtPhysicalIndex	Hh3cAdminState	notSupported(1), locked(2), shuttingDown(3), unlocked(4)}
1.3.6.1.4.1.25506.2.6.1.1.1.1.5 (hh3cEntityExtAlarmLight)	Entity alarm status.	hh3cEntityExtPhysicalIndex	Hh3cAlarmStatus	BITS {, notSupported(0), underRepair(1), critical(2), major(3), minor(4), alarmOutstanding(5), warning(6), indeterminate(7), }
1.3.6.1.4.1.25506.2.6.1.1.1.1.19 (hh3cEntityExtErrorStatus)	Entity error status.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.

Recommended action

No action is required.

hh3cEntityInsert

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.2.0.12	Entity installation	Recovery notification	Minor	N/A (N/A)	ON

Notification triggers

This notification is generated when an entity is inserted into the device.

System impact

No negative impact on services.

Objects

OID (object name)

Description

Index nodes

Type

Value range

1.3.6.1.2.1.47.1.1.1.1.2 (entPhysicalDescr)

Description of the entity.

entPhysicalIndex

SnmpAdminString

OCTET STRING (SIZE (0..255))

1.3.6.1.4.1.25506.2.6.1.1.1.1.2 (hh3cEntityExtAdminStatus)

Administrative status of the entity.

hh3cEntityExtPhysicalIndex

Hh3cAdminState

notSupported(1)

locked(2)

shuttingDown(3)

unlocked(4)}

1.3.6.1.4.1.25506.2.6.1.1.1.1.3 (hh3cEntityExtOperStatus)

Operation status of the entity.

hh3cEntityExtPhysicalIndex

Hh3cOperState

notSupported(1)

disabled(2)

enabled(3)

dangerous(4)

Recommended action

No action is required.

hh3cEntityRemove

Basic information

OID

Event

Type

Severity

Recovery notification

Default status

1.3.6.1.4.1.25506.2.6.2.0.13

Entity removal

Error notification

Minor

1.3.6.1.4.1.25506.2.6.2.0.12(hh3cEntityInsert)

Notification triggers

This notification is generated when an entity is removed from the device.

System impact

Depends on the removed entity.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.2.1.47.1.1.1.1.2 (entPhysicalDescr)	Description of the entity.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.1.1.1.1.2 (hh3cEntityExtAdminStatus)	Administrative status of the entity.	hh3cEntityExtPhysicalIndex	Hh3cAdminState	notSupported(1), locked(2), shuttingDown(3), unlocked(4)}
1.3.6.1.4.1.25506.2.6.1.1.1.1.3 (hh3cEntityExtOperStatus)	Operation status of the entity.	hh3cEntityExtPhysicalIndex	Hh3cOperState	notSupported(1), disabled(2), enabled(3), dangerous(4)

Recommended action

1.If the entity was removed from the device, no action is required.

2.If the entity was not removed, verify that the entity is installed correctly.

3.If the issue persists, contact H3C Support.

hh3cEntityExtForcedPowerOff

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.2.0.14	An entity is forcibly powered off.	Error	Major	N/A (N/A)	ON

Notification triggers

This notification is generated when an entity is forcibly powered off.

System impact

The entity is powered off.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Index of an entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.1.1.1.1.2 (hh3cEntityExtAdminStatus)	Administrative status of the entity.	hh3cEntityExtPhysicalIndex	Hh3cAdminState	notSupported(1), locked(2), shuttingDown(3), unlocked(4)}
1.3.6.1.4.1.25506.2.6.1.1.1.1.5 (hh3cEntityExtAlarmLight)	Alarm status of the entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.

Recommended action

1.Locate the reason that causes the issue, for example, the power cord is unplugged, and address the issue accordingly.

2.If the issue persists, contact H3C Support.

hh3cEntityExtForcedPowerOn

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.2.0.15	An entity is forcibly powered on.	Recovery	Major	N/A (N/A)	ON

Notification triggers

This notification is generated when an entity is forcibly powered on.

System impact

The entity is powered on.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Index of an entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.1.1.1.1.2 (hh3cEntityExtAdminStatus)	Administrative status of the entity.	hh3cEntityExtPhysicalIndex	Hh3cAdminState	notSupported(1), locked(2), shuttingDown(3), unlocked(4)}
1.3.6.1.4.1.25506.2.6.1.1.1.1.5 (hh3cEntityExtAlarmLight)	Alarm status of the entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.

Recommended action

No action is required.

hh3cEntityExtFaultAlarmOn

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.2.0.16	Error occurrence on an entity	Error notification	Major	1.3.6.1.4.1.25506.2.6.2.0.17 (hh3cEntityExtFaultAlarmOff)	ON

Notification triggers

This notification is generated when an error occurs on the entity.

System impact

The impact depends on the faulty entity.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.1.1.1.1.19 (hh3cEntityExtErrorStatus)	Entity error status.	hh3cEntityExtPhysicalIndex	INTEGER	notSupported(1), normal(2), postFailure(3), entityAbsent(4), poeError(11), stackError(21), stackPortBlocked(22), stackPortFailed(23), sfpRecvError(31), sfpSendError(32), sfpBothError(33), sfpRecvExceedUpperLimit(34),, sfpRecvBelowLowerLimit(35),, sfpSendExceedUpperLimit(36),, sfpSendBelowLowerLimit(37),, fanError(41), psuError(51), rpsError(61), moduleFaulty(71), sensorError(81), hardwareFaulty(91)
1.3.6.1.4.1.25506.2.6.1.1.1.1.2 (hh3cEntityExtAdminStatus)	Administrative status of the entity.	hh3cEntityExtPhysicalIndex	Hh3cAdminState	notSupported(1), locked(2), shuttingDown(3), unlocked(4)}
1.3.6.1.4.1.25506.2.6.1.1.1.1.5 (hh3cEntityExtAlarmLight)	Alarm status of the entity.	hh3cEntityExtPhysicalIndex	Hh3cAlarmStatus	BITS {, notSupported(0), underRepair(1), critical(2), major(3), minor(4), alarmOutstanding(5), warning(6), indeterminate(7), }

Recommended action

1.Verify that the entity is installed correctly.

2.If the issue persists, contact H3C Support.

hh3cEntityExtFaultAlarmOff

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.2.0.17	Error clearance	Recovery notification	Major	N/A (N/A)	ON

Notification triggers

This notification is generated when an entity recovers from the faulty state.

System impact

No negative impact on services.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.1.1.1.1.19 (hh3cEntityExtErrorStatus)	Error status of the entity.	hh3cEntityExtPhysicalIndex	INTEGER	notSupported(1), normal(2), postFailure(3), entityAbsent(4), poeError(11), stackError(21), stackPortBlocked(22), stackPortFailed(23), sfpRecvError(31), sfpSendError(32), sfpBothError(33), sfpRecvExceedUpperLimit(34),, sfpRecvBelowLowerLimit(35),, sfpSendExceedUpperLimit(36),, sfpSendBelowLowerLimit(37),, fanError(41), psuError(51), rpsError(61), moduleFaulty(71), sensorError(81), hardwareFaulty(91)
1.3.6.1.4.1.25506.2.6.1.1.1.1.2 (hh3cEntityExtAdminStatus)	Administrative status of the entity.	hh3cEntityExtPhysicalIndex	Hh3cAdminState	notSupported(1), locked(2), shuttingDown(3), unlocked(4)}
1.3.6.1.4.1.25506.2.6.1.1.1.1.5 (hh3cEntityExtAlarmLight)	Alarm status of the entity.	hh3cEntityExtPhysicalIndex	Hh3cAlarmStatus	BITS {, notSupported(0), underRepair(1), critical(2), major(3), minor(4), alarmOutstanding(5), warning(6), indeterminate(7), }

Recommended action

No action is required.

hh3cEntityExtResourceLack

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.2.0.18	A type of resource on an entity is insufficient.	Error	Major	N/A (N/A)	ON

Notification triggers

This notification is generated when a type of resource on an entity is insufficient.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))

Recommended action

Analyze the insufficient resources in conjunction with other notifications.

hh3cEntityExtResourceEnough

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.2.0.19	The condition that causes insufficient resources on an entity is cleared.	Recovery	Major	N/A (N/A)	ON

Notification triggers

This notification is generated when the condition that causes insufficient resources on an entity is cleared.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))

Recommended action

No action is required.

hh3cEntityExtTemperatureLower

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.2.0.20	Temperature of an entity lower than the low-temperature threshold	Error notification	Major	1.3.6.1.4.1.25506.2.6.2.0.22 (hh3cEntityExtTemperatureNormal)	ON

Notification triggers

This notification is generated when the temperature of an entity decreases below the low-temperature threshold.

System impact

A low temperature affects normal operation of the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.1.1.1.1.12 (hh3cEntityExtTemperature)	Temperature of the entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.1.1.1.21 (hh3cEntityExtLowerTemperatureThreshold)	Low-temperature threshold for the entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.1.1.1.2 (hh3cEntityExtAdminStatus)	Administrative status of the entity.	hh3cEntityExtPhysicalIndex	Hh3cAdminState	notSupported(1), locked(2), shuttingDown(3), unlocked(4)}

Recommended action

2.Identify the reason why the temperature dropped below the lower limit.

3.Verify that the temperature has increased to the normal.

4.If the issue persists, contact H3C Support.

hh3cEntityExtTemperatureTooUp

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.2.0.21	Temperature of an entity exceeded the shutdown temperature threshold	Error	Critical	1.3.6.1.4.1.25506.2.6.2.0.22 (hh3cEntityExtTemperatureNormal)	ON

Notification triggers

This notification is generated when the temperature of an entity exceeds the shutdown temperature threshold. The notification is sent every 80 seconds till the alarm is cleared.

System impact

Too high temperature causes the system to shut down right now or anytime.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.1.1.1.1.12 (hh3cEntityExtTemperature)	Temperature of the entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.1.1.1.22 (hh3cEntityExtShutdownTemperatureThreshold)	Shutdown temperature threshold for the entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.1.1.1.2 (hh3cEntityExtAdminStatus)	Administrative status of the entity.	hh3cEntityExtPhysicalIndex	Hh3cAdminState	notSupported(1), locked(2), shuttingDown(3), unlocked(4)}

Recommended action

2.Identify the reason causing the temperature to exceed the shutdown temperature threshold.

3.Resolve the issue to make sure the temperature drops back to the normal range.

4.If the issue persists, contact H3C Support.

hh3cEntityExtTemperatureNormal

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.2.0.22	Temperature of an entity returned to the normal range.	Recovery notification	Warning	N/A (N/A)	ON

Notification triggers

This notification is generated when the temperature of an entity returns to the normal range.

System impact

No negative impact on services.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.1.1.1.1.12 (hh3cEntityExtTemperature)	Temperature of the entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.1.1.1.21 (hh3cEntityExtLowerTemperatureThreshold)	Low-temperature threshold for the entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.1.1.1.13 (hh3cEntityExtTemperatureThreshold)	Temperature threshold for the entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.1.1.1.2 (hh3cEntityExtAdminStatus)	Administrative status of the entity.	hh3cEntityExtPhysicalIndex	Hh3cAdminState	notSupported(1), locked(2), shuttingDown(3), unlocked(4)}

Recommended action

No action is required.

hh3cEntityExternalAlarmOccur

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.2.0.23	Entity peripheral fault.	Error	Major	1.3.6.1.4.1.25506.2.6.2.0.24 (hh3cEntityExternalAlarmRecover)	ON

Notification triggers

This notification is generated when an error occurs on the peripheral of an entity.

System impact

Depends on the faulty entity.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))

Recommended action

1.Verify that the entity is installed correctly.

2.If the issue persists, contact H3C Support.

hh3cEntityExternalAlarmRecover

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.2.0.24	A peripheral of an entity recovered.	Recovery notification	Major	N/A (N/A)	ON

Notification triggers

This notification is generated when the peripheral of an entity recovers from the faulty state.

System impact

No negative impact on services.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))

Recommended action

No action is required.

hh3cEntityExtCpuUsageThresholdRecover

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.2.0.25	CPU usage of an entity restored to the normal range.	Recovery notification	Major	N/A (N/A)	ON

Notification triggers

This notification is generated when the CPU usage of an entity restores to the normal range.

System impact

No negative impact on services.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.1.1.1.6 (hh3cEntityExtCpuUsage)	CPU usage of the entity.	hh3cEntityExtPhysicalIndex	Integer32	0..100
1.3.6.1.4.1.25506.2.6.1.1.1.1.7 (hh3cEntityExtCpuUsageThreshold)	CPU usage threshold for the entity.	hh3cEntityExtPhysicalIndex	Integer32	0..100
1.3.6.1.4.1.25506.2.6.1.1.1.1.2 (hh3cEntityExtAdminStatus)	Administrative status of the entity.	hh3cEntityExtPhysicalIndex	Hh3cAdminState	notSupported(1), locked(2), shuttingDown(3), unlocked(4)}
1.3.6.1.4.1.25506.2.6.1.1.1.1.5 (hh3cEntityExtAlarmLight)	Alarm status of the entity.	hh3cEntityExtPhysicalIndex	Hh3cAlarmStatus	BITS {, notSupported(0), underRepair(1), critical(2), major(3), minor(4), alarmOutstanding(5), warning(6), indeterminate(7), }
1.3.6.1.4.1.25506.2.6.1.1.1.1.31 (hh3cEntityExtCpuUsageRecoverThreshold)	CPU usage recovery threshold for the entity.	hh3cEntityExtPhysicalIndex	Integer32	0..100
1.3.6.1.4.1.25506.2.6.2.1.4 (hh3cEntityExtFirstTrapTime)	Timestamp at which the notification is sent for the first time.	N/A	TimeTicks	Standard MIB values.

Recommended action

No action is required.

hh3cEntityExtMemUsageThresholdRecover

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.2.0.26	Memory usage of an entity restored to the normal range.	Recovery notification	Major	N/A (N/A)	ON

Notification triggers

This notification is generated when the memory usage of an entity restores to the normal range.

System impact

No negative impact on services.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.1.1.1.8 (hh3cEntityExtMemUsage)	Memory usage of the entity.	hh3cEntityExtPhysicalIndex	Integer32	0..100
1.3.6.1.4.1.25506.2.6.1.1.1.1.9 (hh3cEntityExtMemUsageThreshold)	Memory usage threshold for the entity.	hh3cEntityExtPhysicalIndex	Integer32	0..100
1.3.6.1.4.1.25506.2.6.1.1.1.1.10 (hh3cEntityExtMemSize)	Memory size of the entity.	hh3cEntityExtPhysicalIndex	Unsigned32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.1.1.1.2 (hh3cEntityExtAdminStatus)	Administrative status of the entity.	hh3cEntityExtPhysicalIndex	Hh3cAdminState	notSupported(1), locked(2), shuttingDown(3), unlocked(4)}
1.3.6.1.4.1.25506.2.6.1.1.1.1.5 (hh3cEntityExtAlarmLight)	Alarm status of the entity.	hh3cEntityExtPhysicalIndex	Hh3cAlarmStatus	BITS {, notSupported(0), underRepair(1), critical(2), major(3), minor(4), alarmOutstanding(5), warning(6), indeterminate(7), }
1.3.6.1.4.1.25506.2.6.2.1.4 (hh3cEntityExtFirstTrapTime)	Timestamp at which the notification is sent for the first time.	N/A	TimeTicks	Standard MIB values.

Recommended action

No action is required.

hh3cEntityExtMemAllocatedFailed

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.2.0.27	Memory allocation request failure	Informational	Major	N/A (N/A)	ON

Notification triggers

This notification is generated when memory allocation for the entity failed.

System impact

An incorrect memory allocation affects system services.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.2.1.1 (hh3cEntityExtTrapDescription)	Description of the notification.	N/A	SnmpAdminString	OCTET STRING (SIZE (0..255))

Recommended action

To resolve the issue, contact H3C Support.

hh3cEntityExtECCParityAlarm

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.2.0.28	ECC parity check error	Informational	Major	-	ON

Notification triggers

This notification is generated when an ECC parity check error occurs on an entity.

System impact

The service processing capacity of the system might be affected.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.2.1.2 (hh3cEntityExtECCParityAlarmStatus)	Status of ECC parity check for the entity	N/A	INTEGER	other(1), l1cache(2), l2cache(3), sdram(4), mac(5), tcam(6), ingressbuffer(7), egressbuffer(8), lpm(9), controlmemory(10)
1.3.6.1.4.1.25506.2.6.2.1.1 (hh3cEntityExtTrapDescription)	Description of the entity.	N/A	SnmpAdminString	OCTET STRING (SIZE (0..255))

Recommended action

To resolve the issue, contact H3C Support.

hh3cEntityExtCritLowerTempThresholdNotification

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.2.0.29	The temperature of an entity is lower than a temperature threshold.	Informational	Major	N/A (N/A)	ON

Notification triggers

This notification is generated when the temperature of an entity is lower than a temperature threshold.

System impact

If the temperature falls too far below the required temperature for the entity, the entity will shut down.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.1.1.1.1.13 (hh3cEntityExtTemperatureThreshold)	Temperature threshold for the entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.1.1.1.29 (hh3cEntityExtCriticalLowerTemperatureThreshold)	Critical low-temperature threshold for the entity. Notifies the device of the issue and shuts down the device when the temperature reaches the critical-low temperature threshold.	hh3cEntityExtPhysicalIndex	Integer32	Integer32 (-2147483648..2147483647)

Recommended action

Check the environment temperature.

hh3cEntityExtTemperatureTooLow

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.2.0.30	The temperature is significantly lower than a temperature threshold.	Error	Major	N/A (N/A)	ON

Notification triggers

This notification is generated when the temperature of an entity has dropped too low.

System impact

When the temperature falls too far below the required temperature for the entity, the entity has a risk of shutdown.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.1.1.1.1.13 (hh3cEntityExtTemperatureThreshold)	Temperature threshold for the entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.1.1.1.29 (hh3cEntityExtCriticalLowerTemperatureThreshold)	Critical-low temperature threshold for the entity. Notifies the device of the issue and shuts down the device when the temperature reaches the critical-low temperature threshold.	hh3cEntityExtPhysicalIndex	Integer32	Integer32 (-2147483648..2147483647)

Recommended action

Check the environment temperature.

hh3cEntityExtFanDirectionNotPreferred

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.2.0.31	The airflow direction of a fan tray is different from the preferred airflow direction.	Error	Major	1.3.6.1.4.1.25506.8.35.12.1.7 (hh3cFanNormal)	ON

Notification triggers

This notification is generated when the airflow direction of a fan tray is different from the preferred airflow direction. The possible reasons include the following:

The preferred airflow direction configuration is incorrect.

An incorrect fan tray is inserted.

System impact

Incorrect airflow direction of a fan tray will affect the system heat dissipation.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))

Recommended action

1.Select a fan tray according to the ventilation system in the equipment room. A fan tray can operate effectively only when it uses the same airflow direction as the ventilation system in the equipment room.

2.If the fan tray uses the same airflow direction as the ventilation system in the equipment room, verify that the configured preferred airflow direction is the same as the airflow direction of the fan tray.

hh3cEntityExtFanDirectionNotAccord

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.2.0.32	The airflow directions of the fan trays are inconsistent.	Error	Major	1.3.6.1.4.1.25506.8.35.12.1.7 (hh3cFanNormal)	ON

Notification triggers

This notification is generated when the airflow directions of the fan trays are inconsistent.

System impact

Heat dissipation is affected.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))

Recommended action

1.Select fan trays whose airflow direction is consistent in accordance with the ventilation system of the equipment room.

2.If the issue persists when the airflow direction of the fan trays is consistent with the ventilation system of the equipment room, adjust the fan configuration to match the airflow direction.

hh3cEntityExtSFPInvalid

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.2.0.33	The transceiver module of an interface is not compatible with the interface module.	Error	Major	1.3.6.1.4.1.25506.8.35.12.1.7 (hh3cFanNormal)	ON

Notification triggers

This notification is periodically generated when a counterfeit transceiver module is detected.

System impact

The authorized manufacturer cannot guarantee the correct operating of the transceiver module. The transceiver module might fail on a future date.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.2.1.3 (hh3cEntityExtSFPInvalidInDays)	Remaining valid days of the transceiver module.		Integer32	Standard MIB values.

Recommended action

1.Verify that the transceiver module is compatible with the interface module.

2.If the issue persists, contact H3C Support.

hh3cEntityExtSFPInvalidNow

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.2.0.34	The transceiver module of an interface is not compatible with the interface module.	Error	Major	1.3.6.1.4.1.25506.8.35.12.1.7 (hh3cFanNormal)	ON

Notification triggers

This notification is periodically generated when a counterfeit transceiver module is detected.

System impact

The authorized manufacturer cannot guarantee the correct operating of the transceiver module. The transceiver module might fail on a future date.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))

Recommended action

1.Verify that the transceiver module is compatible with the interface module.

2.If the issue persists, contact H3C Support.

hh3cEntityExtMemUsageThresholdOverTrap

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.2.0.35	Memory usage exceeded the threshold.	Error	Major	1.3.6.1.4.1.25506.2.6.2.0.36 (hh3cEntityExtMemUsageThresholdRecoverTrap)	ON

Notification triggers

This notification is generated when the total memory size of the entity is equal to or greater than 4 GB and the memory usage of the entity exceeds hh3cEntityExtMemUsageThreshold (memory usage threshold). The notification is sent every 60 seconds till the alarm is cleared.

If the total memory size is less than 4 GB, an hh3cEntityExtMemUsageThresholdNotification notification is generated when the memory usage exceeds hh3cEntityExtMemUsageThreshold.

System impact

Decreased available memory size might reduce the service processing capacity of the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.1.1.1.8 (hh3cEntityExtMemUsage)	Memory usage of the entity.	hh3cEntityExtPhysicalIndex	Integer32	0..100
1.3.6.1.4.1.25506.2.6.1.1.1.1.9 (hh3cEntityExtMemUsageThreshold)	Memory usage threshold for the entity.	hh3cEntityExtPhysicalIndex	Integer32	0..100
1.3.6.1.4.1.25506.2.6.1.1.1.1.32 (hh3cEntityExtMemSizeRev)	Memory size of the entity.	hh3cEntityExtPhysicalIndex	Counter64	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.1.1.1.2 (hh3cEntityExtAdminStatus)	Administrative status of the entity.	hh3cEntityExtPhysicalIndex	Hh3cAdminState	notSupported(1), locked(2), shuttingDown(3), unlocked(4)}
1.3.6.1.4.1.25506.2.6.1.1.1.1.5 (hh3cEntityExtAlarmLight)	Alarm status of the entity.	hh3cEntityExtPhysicalIndex	Hh3cAlarmStatus	BITS {, notSupported(0), underRepair(1), critical(2), major(3), minor(4), alarmOutstanding(5), warning(6), indeterminate(7), }

Recommended action

1.Disable unused services to reduce memory consumption.

2.If the alarm is automatically cleared, no action is required. If the alarm cannot be automatically cleared, contact H3C Support.

hh3cEntityExtMemUsageThresholdRecoverTrap

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.2.0.36	Memory usage of an entity restored to the normal range.	Recovery notification	Major	-	ON

Notification triggers

This notification is generated when the memory usage of an entity recovers restores to the normal range.

Status control

This notification cannot be disabled.

Objects

OID (object name)

Description

Index nodes

Type

Value range

1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)

Entity index.

hh3cEntityExtPhysicalIndex

Integer32

Standard MIB values.

1.3.6.1.4.1.25506.2.6.1.1.1.1.8 (hh3cEntityExtMemUsage)

Memory usage of the entity.

hh3cEntityExtPhysicalIndex

Integer32

0..100

1.3.6.1.4.1.25506.2.6.1.1.1.1.9 (hh3cEntityExtMemUsageThreshold)

Memory usage threshold for the entity.

hh3cEntityExtPhysicalIndex

Integer32

0..100

1.3.6.1.4.1.25506.2.6.1.1.1.1.32 (hh3cEntityExtMemSizeRev)

Memory size of the entity.

hh3cEntityExtPhysicalIndex

Counter64

Standard MIB values.

1.3.6.1.4.1.25506.2.6.1.1.1.1.2 (hh3cEntityExtAdminStatus)

Administrative status of the entity.

hh3cEntityExtPhysicalIndex

Hh3cAdminState

notSupported(1)

locked(2)

shuttingDown(3)

unlocked(4)}

1.3.6.1.4.1.25506.2.6.1.1.1.1.5 (hh3cEntityExtAlarmLight)

Alarm status of the entity.

hh3cEntityExtPhysicalIndex

Hh3cAlarmStatus

BITS {

notSupported(0)

underRepair(1)

critical(2)

major(3)

minor(4)

alarmOutstanding(5)

warning(6)

indeterminate(7)

}

Recommended action

No action is required.

hh3cEntityExtVoltageNormal

Basic information

OID

Event

Type

Severity

Recovery notification

Default status

1.3.6.1.4.1.25506.2.6.2.0.37

Voltage of an entity restored to the normal range

Recovery notification

Warning

N/A

Notification triggers

This notification is generated when the voltage of an entity restores to the normal range.

System impact

No negative impact on services.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.5.1.1.1 (hh3cEntityExtCurrentVoltage)	Voltage of the entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.5.1.1.2 (hh3cEntityExtNominalVoltage)	Rated voltage of the entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.5.1.1.4 (hh3cEntityExtVoltageMajorLowThreshold)	Low-voltage threshold for the entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.5.1.1.6 (hh3cEntityExtVoltageMajorHighThreshold)	High-voltage threshold for the entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.

Recommended action

No action is required.

hh3cEntityExtVoltageLower

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.2.0.38	Voltage of an entity dropped below the low-voltage threshold	Error	Major	1.3.6.1.4.1.25506.2.6.2.0.37 (hh3cEntityExtVoltageNormal)	ON

Notification triggers

This notification is generated when the voltage of an entity drops below the low-voltage threshold.

System impact

The service processing capacity of the system might be affected.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.5.1.1.1 (hh3cEntityExtCurrentVoltage)	Voltage of the entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.5.1.1.2 (hh3cEntityExtNominalVoltage)	Rated voltage of the entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.5.1.1.4 (hh3cEntityExtVoltageMajorLowThreshold)	Low-voltage threshold for the entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.

Recommended action

1.Verify that the power system of the device is normal.

2.If the issue persists, contact H3C Support.

hh3cEntityExtVoltageTooLow

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.2.0.39	Voltage of the threshold dropped below critical low-voltage threshold	Error	Critical	1.3.6.1.4.1.25506.2.6.2.0.37 (hh3cEntityExtVoltageNormal)	ON

Notification triggers

This notification is generated when the voltage of the entity drops below the critical low-voltage threshold. The notification is sent every 80 seconds till the alarm is cleared.

System impact

The service processing capacity of the system might be affected.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.5.1.1.1 (hh3cEntityExtCurrentVoltage)	Voltage of the entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.5.1.1.2 (hh3cEntityExtNominalVoltage)	Rated voltage of the entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.5.1.1.5 (hh3cEntityExtVoltageFatalLowThreshold)	Critical low-voltage threshold for the entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.

Recommended action

1.Verify that the power system of the device is normal.

2.If the issue persists, contact H3C Support.

hh3cEntityExtVoltageHigher

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.2.0.40	Voltage of an entity exceeded the high-voltage threshold	Error	Major	1.3.6.1.4.1.25506.2.6.2.0.37 (hh3cEntityExtVoltageNormal)	ON

Notification triggers

This notification is generated when the voltage of an entity increases above the high-voltage threshold.

System impact

The service processing capacity of the system might be affected.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.5.1.1.1 (hh3cEntityExtCurrentVoltage)	Voltage of the entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.5.1.1.2 (hh3cEntityExtNominalVoltage)	Rated voltage of the entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.5.1.1.6 (hh3cEntityExtVoltageMajorHighThreshold)	High-voltage threshold for the entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.

Recommended action

1.Verify that the power system of the device is normal.

2.If the issue persists, contact H3C Support.

hh3cEntityExtVoltageTooHigh

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.2.0.41	Voltage of an entity exceeded the critical high-voltage threshold	Error	Critical	1.3.6.1.4.1.25506.2.6.2.0.37 (hh3cEntityExtVoltageNormal)	ON

Notification triggers

This notification is generated when the voltage of an entity increases over the critical high-voltage threshold. The notification is sent every 80 seconds till the alarm is cleared.

System impact

The service processing capacity of the system might be affected.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.5.1.1.1 (hh3cEntityExtCurrentVoltage)	Voltage of the entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.5.1.1.2 (hh3cEntityExtNominalVoltage)	Rated voltage of the entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.1.5.1.1.7 (hh3cEntityExtVoltageFatalHighThreshold)	Critical high-voltage threshold for the entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.

Recommended action

1.Verify that the power system of the device is normal.

2.If the issue persists, contact H3C Support.

hh3cEntityExtSFPAlarmOnEx

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.2.0.42	Failure of a transceiver module.	Error	Major	1.3.6.1.4.1.25506.2.6.2.0.43 (hh3cEntityExtSFPAlarmOffEx)	ON

Notification triggers

This notification is generated when a transceiver module is faulty.

System impact

The faulty transceiver module is not available for use.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.1.1.1.1.2 (hh3cEntityExtAdminStatus)	Administrative status of the entity.	hh3cEntityExtPhysicalIndex	Hh3cAdminState	notSupported(1), locked(2), shuttingDown(3), unlocked(4)}
1.3.6.1.4.1.25506.2.6.1.1.1.1.5 (hh3cEntityExtAlarmLight)	Alarm status of the entity.	hh3cEntityExtPhysicalIndex	Hh3cAlarmStatus	BITS {, notSupported(0), underRepair(1), critical(2), major(3), minor(4), alarmOutstanding(5), warning(6), indeterminate(7), }
1.3.6.1.4.1.25506.2.6.1.1.1.1.19 (hh3cEntityExtErrorStatus)	Alarm status for the entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.

Recommended action

1.Verify that the transceiver module is normal.

2.If the issue persists, contact H3C Support.

hh3cEntityExtSFPAlarmOffEx

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.2.0.43	Recovery of a transceiver module.	Recovery notification	Major	N/A (N/A)	ON

Notification triggers

This notification is generated when a transceiver module recovers from a fault.

System impact

No negative impact on services.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.1.1.1.1.2 (hh3cEntityExtAdminStatus)	Administrative status of the entity.	hh3cEntityExtPhysicalIndex	Hh3cAdminState	notSupported(1), locked(2), shuttingDown(3), unlocked(4)}
1.3.6.1.4.1.25506.2.6.1.1.1.1.5 (hh3cEntityExtAlarmLight)	Alarm status of the entity.	hh3cEntityExtPhysicalIndex	Hh3cAlarmStatus	BITS {, notSupported(0), underRepair(1), critical(2), major(3), minor(4), alarmOutstanding(5), warning(6), indeterminate(7), }
1.3.6.1.4.1.25506.2.6.1.1.1.1.19 (hh3cEntityExtErrorStatus)	Alarm status for the entity.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.

Recommended action

No action is required.

hh3cEntityExtSFPPhony

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.2.0.11	A counterfeit transceiver module was detected.	Error	Major	N/A (N/A)	ON

Notification triggers

This notification is generated when a counterfeit transceiver module is detected.

System impact

Use of a counterfeit transceiver module might result in communication failure.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.1.1.1.1.2 (hh3cEntityExtAdminStatus)	Administrative status of the entity.	hh3cEntityExtPhysicalIndex	Hh3cAdminState	notSupported(1), locked(2), shuttingDown(3), unlocked(4)}
1.3.6.1.4.1.25506.2.6.1.1.1.1.5 (hh3cEntityExtAlarmLight)	Alarm status of the entity.	hh3cEntityExtPhysicalIndex	Hh3cAlarmStatus	BITS {, notSupported(0), underRepair(1), critical(2), major(3), minor(4), alarmOutstanding(5), warning(6), indeterminate(7), }

Recommended action

To resolve this issue, replace the counterfeit transceiver module with one from H3C.

hh3cEntityExtBoardServiceMisMatch

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.2.0.44	A service was not supported because of card hardware restrictions.	Informational	Major	N/A (N/A)	ON

Notification triggers

This notification is generated in one of the following situations:

After you configure a service, a card that does not support that service is inserted into the device.

When you configure a service, the device has cards that do not support that service.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.2.1.5 (hh3cEntityExtRelativeLocation)	Entity location information.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.2.1.6 (hh3cEntityExtServiceName)	Service name.	N/A	OCTECT STRING	OCTET STRING (SIZE (1..255))

Recommended action

No action is required.

hh3cEntityExtSystemFatalAlarmOccur

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.1	System critical alarm occurred.	Error	Critical	1.3.6.1.4.1.25506.2.6.4.0.2 (hh3cEntityExtSystemFatalAlarmClear)	ON

Notification triggers

This notification is generated when a system critical alarm occurs.

System impact

The service processing capacity of the system might be affected.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

1.Check the system status and resolve the issue.

2.If the issue persists, contact H3C Support.

hh3cEntityExtSystemFatalAlarmClear

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.2	System critical alarm cleared.	Recovery	Critical	N/A (N/A)	ON

Notification triggers

This notification is generated when a system critical alarm is cleared.

System impact

No negative impact on services.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

No action is required.

hh3cEntityExtSystemAlarmOccur

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.3	System major alarm occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.4 (hh3cEntityExtSystemAlarmClear)	ON

Notification triggers

This notification is generated when a system major alarm occurs.

System impact

The service processing capacity of the system might be affected.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

1.Check the system status and resolve the issue.

2.If the issue persists, contact H3C Support.

hh3cEntityExtSystemAlarmClear

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.4	System major alarm cleared.	Recovery	Major	N/A (N/A)	ON

Notification triggers

This notification is generated when a system major alarm is cleared.

System impact

No negative impact on services.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

No action is required.

hh3cEntityExtSystemWarningOccur

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.5	System warning alarm occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.6 (hh3cEntityExtSystemWarningClear)	ON

Notification triggers

This notification is generated when a system warning alarm occurs.

System impact

The service processing capacity of the system might be affected.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

1.Check the system status and resolve the issue.

2.If the issue persists, contact H3C Support.

hh3cEntityExtSystemWarningClear

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.6	System warning alarm cleared.	Recovery	Warning	N/A (N/A)	ON

Notification triggers

This notification is generated when a system warning alarm is cleared.

System impact

No negative impact on services.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

No action is required.

hh3cEntityExtBoardFatalAlarmOccur

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.7	Board major alarm occurred	Error	Critical	1.3.6.1.4.1.25506.2.6.4.0.8 (hh3cEntityExtBoardFatalAlarmClear)	ON

Notification triggers

This notification is generated when a board major alarm occurs.

System impact

The service processing capacity of the system might be affected.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

1.Check the board status and resolve the issue.

2.If the issue persists, contact H3C Support.

hh3cEntityExtBoardFatalAlarmClear

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.8	Board major alarm cleared.	Recovery	Critical	N/A (N/A)	ON

Notification triggers

This notification is generated when a board major alarm is cleared.

System impact

No negative impact on services.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	Board major alarm occurred	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated a board major alarm occurs.

System impact

The service processing capacity of the system might be affected.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

1.Check the board status and resolve the issue.

2.If the issue persists, contact H3C Support.

hh3cEntityExtBoardAlarmClear

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	Board major alarm cleared	Recovery	Major	N/A (N/A)	ON

Notification triggers

This notification is generated when a board major alarm is cleared.

System impact

No negative impact on services.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

No action is required.

hh3cEntityExtBoardWarningOccur

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.11	Board warning alarm occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.12 (hh3cEntityExtBoardWarningClear)	ON

Notification triggers

This notification is generated when a board warning alarm occurs.

System impact

The service processing capacity of the system might be affected.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

1.Check the board status and resolve the issue.

2.If the issue persists, contact H3C Support.

hh3cEntityExtBoardWarningClear

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.12	Board warning alarm cleared.	Recovery	Warning	N/A (N/A)	ON

Notification triggers

This notification is generated when a board warning alarm is cleared.

System impact

No negative impact on services.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

No action is required.

hh3cEntityExtPowerFatalAlarmOccur

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.13	Power supply critical alarm occurred.	Error	Critical	1.3.6.1.4.1.25506.2.6.4.0.14 (hh3cEntityExtPowerFatalAlarmClear)	ON

Notification triggers

This notification is generated when a power supply critical alarm occurs.

System impact

The service processing capacity of the system might be affected.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

1.Check the power supply status and resolve the issue.

2.If the issue persists, contact H3C Support.

hh3cEntityExtPowerFatalAlarmClear

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.14	Power supply critical alarm cleared	Recovery	Critical	N/A (N/A)	ON

Notification triggers

This notification is generated when a power supply critical alarm is cleared.

System impact

No negative impact on services.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

No action is required.

hh3cEntityExtPowerAlarmOccur

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.15	Power supply major alarm occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.16 (hh3cEntityExtPowerAlarmClear)	ON

Notification triggers

This notification is generated when a power supply major alarm occurs.

System impact

The service processing capacity of the system might be affected.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

1.Check the power status and resolve the issue.

2.If the issue persists, contact H3C Support.

hh3cEntityExtPowerAlarmClear

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.16	Power supply major alarm cleared.	Recovery	Major	N/A (N/A)	ON

Notification triggers

This notification is generated when a power supply major alarm is cleared.

System impact

No negative impact on services.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

No action is required.

hh3cEntityExtPowerWarningOccur

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.17	Power supply warning alarm occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.18 (hh3cEntityExtPowerWarningClear)	ON

Notification triggers

This notification is generated when a power supply waring alarm occurs.

System impact

The service processing capacity of the system might be affected.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

1.Check the power status and resolve the issue.

2.If the issue persists, contact H3C Support.

hh3cEntityExtPowerWarningClear

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.18	Power supply waring alarm cleared	Recovery	Warning	N/A (N/A)	ON

Notification triggers

This notification is generated when a power supply waring alarm is cleared.

System impact

No negative impact on services.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

No action is required.

hh3cEntityExtFanFatalAlarmOccur

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.19	Fan tray critical alarm occurred.	Error	Critical	1.3.6.1.4.1.25506.2.6.4.0.20 (hh3cEntityExtFanFatalAlarmClear)	ON

Notification triggers

This notification is generated when a fan tray critical alarm occurs.

System impact

The service processing capacity of the system might be affected.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

1.Check the fan tray status and resolve the issue.

2.If the issue persists, contact H3C Support.

hh3cEntityExtFanFatalAlarmClear

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.20	Fan tray critical alarm cleared.	Recovery	Critical	N/A (N/A)	ON

Notification triggers

This notification is generated when a fan tray critical alarm is cleared.

System impact

No negative impact on services.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

No action is required.

hh3cEntityExtFanAlarmOccur

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.21	Fan tray major alarm occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.22 (hh3cEntityExtFanAlarmClear)	ON

Notification triggers

This notification is generated when a fan tray major alarm occurs.

System impact

The service processing capacity of the system might be affected.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

1.Check the fan tray status and resolve the issue.

2.If the issue persists, contact H3C Support.

hh3cEntityExtFanAlarmClear

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.22	Fan tray major alarm cleared.	Recovery	Major	N/A (N/A)	ON

Notification triggers

This notification is generated when a fan tray major alarm is cleared.

System impact

No negative impact on services.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

No action is required.

hh3cEntityExtFanWarningOccur

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.23	Fan tray warning alarm occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.24 (hh3cEntityExtFanWarningClear)	ON

Notification triggers

This notification is generated when a fan tray warning alarm occurs.

System impact

The service processing capacity of the system might be affected.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

1.Check the fan tray status and resolve the issue.

2.If the issue persists, contact H3C Support.

hh3cEntityExtFanWarningClear

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.24	Fan tray warning alarm cleared.	Recovery	Warning	N/A (N/A)	ON

Notification triggers

This notification is generated when a fan tray waring alarm is cleared.

System impact

No negative impact on services.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

No action is required.

hh3cEntityExtVoltageFatalAlarmOccur

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.25	Voltage critical alarm occurred.	Error	Critical	1.3.6.1.4.1.25506.2.6.4.0.26 (hh3cEntityExtVoltageFatalAlarmClear)	ON

Notification triggers

This notification is generated when a voltage critical alarm occurs.

System impact

The service processing capacity of the system might be affected.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.4 (hh3cEntityExtThresholdType)	Threshold type.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1.5 (hh3cEntityExtThresholdVal)	Threshold value.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1.6 (hh3cEntityExtCurrentVal)	Current value.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

1.Check voltage information and resolve the issue.

2.If the issue persists, contact H3C Support.

hh3cEntityExtVoltageFatalAlarmClear

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.26	Voltage critical alarm cleared.	Recovery	Critical	N/A (N/A)	ON

Notification triggers

This notification is generated when a voltage critical alarm is cleared.

System impact

No negative impact on services.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.4 (hh3cEntityExtThresholdType)	Threshold type.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1.5 (hh3cEntityExtThresholdVal)	Threshold value.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1.6 (hh3cEntityExtCurrentVal)	Current value.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

No action is required.

hh3cEntityExtVoltageAlarmOccur

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.27	Voltage major alarm occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.28 (hh3cEntityExtVoltageAlarmClear)	ON

Notification triggers

This notification is generated when a voltage major alarm occurs.

System impact

The service processing capacity of the system might be affected.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.4 (hh3cEntityExtThresholdType)	Threshold type.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1.5 (hh3cEntityExtThresholdVal)	Threshold value.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1.6 (hh3cEntityExtCurrentVal)	Current value.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

1.Check voltage information and resolve the issue.

2.If the issue persists, contact H3C Support.

hh3cEntityExtVoltageAlarmClear

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.2	Voltage major alarm cleared.	Recovery	Major	N/A (N/A)	ON

Notification triggers

This notification is generated when a voltage major alarm is cleared.

System impact

No negative impact on services.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.4 (hh3cEntityExtThresholdType)	Threshold type.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1.5 (hh3cEntityExtThresholdVal)	Threshold value.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1.6 (hh3cEntityExtCurrentVal)	Current value.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

No action is required.

hh3cEntityExtVoltageWarningOccur

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.29	Voltage warning alarm occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.30 (hh3cEntityExtVoltageWarningClear)	ON

Notification triggers

This notification is generated when a voltage warning alarm occurs.

System impact

The service processing capacity of the system might be affected.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.4 (hh3cEntityExtThresholdType)	Threshold type.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1.5 (hh3cEntityExtThresholdVal)	Threshold value.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1.6 (hh3cEntityExtCurrentVal)	Current value.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

1.Check voltage information and resolve the issue.

2.If the issue persists, contact H3C Support.

hh3cEntityExtVoltageWarningClear

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.30	Voltage warning alarm cleared.	Recovery	Warning	N/A (N/A)	ON

Notification triggers

This notification is generated when a voltage warning alarm is cleared.

System impact

No negative impact on services.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.4 (hh3cEntityExtThresholdType)	Threshold type.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1.5 (hh3cEntityExtThresholdVal)	Threshold value.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1.6 (hh3cEntityExtCurrentVal)	Current value.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

No action is required.

hh3cEntityExtTemperatureFatalAlarmOccur

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.31	Temperature critical alarm occurred.	Error	Critical	1.3.6.1.4.1.25506.2.6.4.0.32 (hh3cEntityExtTemperatureFatalAlarmClear)	ON

Notification triggers

This notification is generated when a temperature critical alarm occurs.

System impact

The service processing capacity of the system might be affected.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.4 (hh3cEntityExtThresholdType)	Threshold type.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1.5 (hh3cEntityExtThresholdVal)	Threshold value.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1.6 (hh3cEntityExtCurrentVal)	Current value.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

1.Check temperature information and resolve the issue.

2.If the issue persists, contact H3C Support.

hh3cEntityExtTemperatureFatalAlarmClear

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.32	Temperature critical alarm cleared.	Recovery	Critical	N/A (N/A)	ON

Notification triggers

This notification is generated when a temperature critical alarm is cleared.

System impact

No negative impact on services.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.4 (hh3cEntityExtThresholdType)	Threshold type.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1.5 (hh3cEntityExtThresholdVal)	Threshold value.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..63)
1.3.6.1.4.1.25506.2.6.4.1.6 (hh3cEntityExtCurrentVal)	Current value.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

No action is required.

hh3cEntityExtTemperatureAlarmOccur

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.33	Temperature major alarm occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.34 (hh3cEntityExtTemperatureAlarmClear)	ON

Notification triggers

This notification is generated when a temperature major alarm occurs.

System impact

The service processing capacity of the system might be affected.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.4 (hh3cEntityExtThresholdType)	Threshold type.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1.5 (hh3cEntityExtThresholdVal)	Threshold value.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1.6 (hh3cEntityExtCurrentVal)	Current value.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

1.Check temperature information and resolve the issue.

2.If the issue persists, contact H3C Support.

hh3cEntityExtTemperatureAlarmClear

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.34	Temperature major alarm cleared.	Recovery	Major	N/A (N/A)	ON

Notification triggers

This notification is generated when a temperature major alarm is cleared.

System impact

No negative impact on services.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.4 (hh3cEntityExtThresholdType)	Threshold type.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1.5 (hh3cEntityExtThresholdVal)	Threshold value.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1.6 (hh3cEntityExtCurrentVal)	Current value.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

No action is required.

hh3cEntityExtTemperatureWarningOccur

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.35	Temperature warning alarm occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.36 (hh3cEntityExtTemperatureWarningClear)	ON

Notification triggers

This notification is generated when a temperature warning alarm occurs.

System impact

The service processing capacity of the system might be affected.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.4 (hh3cEntityExtThresholdType)	Threshold type.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1.5 (hh3cEntityExtThresholdVal)	Threshold value.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1.6 (hh3cEntityExtCurrentVal)	Current value.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

1.Check temperature information and resolve the issue.

2.If the issue persists, contact H3C Support.

hh3cEntityExtTemperatureWarningClear

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.36	Temperature warning alarm cleared.	Recovery	Warning	N/A (N/A)	ON

Notification triggers

This notification is generated when a temperature warning alarm is cleared.

System impact

No negative impact on services.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.4 (hh3cEntityExtThresholdType)	Threshold type.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1.5 (hh3cEntityExtThresholdVal)	Threshold value.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1.6 (hh3cEntityExtCurrentVal)	Current value.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

No action is required.

hh3cEntityExtClockFatalAlarmOccur

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.37	Clock critical alarm occurred.	Error	Critical	1.3.6.1.4.1.25506.2.6.4.0.38 (hh3cEntityExtClockFatalAlarmClear)	ON

Notification triggers

This notification is generated when a clock critical alarm occurs.

System impact

The service processing capacity of the system might be affected.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

1.Check the clock status and resolve the issue.

2.If the issue persists, contact H3C Support.

hh3cEntityExtClockFatalAlarmClear

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.38	Clock critical alarm cleared.	Recovery	Critical	N/A (N/A)	ON

Notification triggers

This notification is generated when a clock critical alarm is cleared.

System impact

No negative impact on services.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

No action is required.

hh3cEntityExtClockAlarmOccur

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.39	Clock major alarm occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.40 (hh3cEntityExtClockAlarmClear)	ON

Notification triggers

This notification is generated when a clock major alarm occurs.

System impact

The service processing capacity of the system might be affected.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

1.Check the clock status and resolve the issue.

2.If the issue persists, contact H3C Support.

hh3cEntityExtClockAlarmClear

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.40	Clock major alarm cleared.	Recovery	Major	N/A (N/A)	ON

Notification triggers

This notification is generated when a clock major alarm is cleared.

System impact

No negative impact on services.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

No action is required.

hh3cEntityExtClockWarningOccur

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.41	Clock warning alarm occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.42 (hh3cEntityExtClockWarningClear)	ON

Notification triggers

This notification is generated when a clock warning alarm occurs.

System impact

The service processing capacity of the system might be affected.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

1.Check the clock status and resolve the issue.

2.If the issue persists, contact H3C Support.

hh3cEntityExtClockWarningClear

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.42	Clock warning alarm cleared.	Recovery	Warning	N/A (N/A)	ON

Notification triggers

This notification is generated when a clock warning alarm is cleared.

System impact

No negative impact on services.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

No action is required.

hh3cEntityExtDiskFatalAlarmOccur

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.43	Disk critical alarm occurred.	Error	Critical	1.3.6.1.4.1.25506.2.6.4.0.44 (hh3cEntityExtDiskFatalAlarmClear)	ON

Notification triggers

This notification is generated when a disk critical alarm occurs.

System impact

The service processing capacity of the system might be affected.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

1.Check the disk status and resolve the issue,

2.If the issue persists, contact H3C Support.

hh3cEntityExtDiskFatalAlarmClear

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.44	Disk critical alarm cleared.	Recovery	Critical	N/A (N/A)	ON

Notification triggers

This notification is generated when a disk critical alarm is cleared.

System impact

No negative impact on services.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

No action is required.

hh3cEntityExtDiskAlarmOccur

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.45	Disk major alarm occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.46 (hh3cEntityExtDiskAlarmClear)	ON

Notification triggers

This notification is generated when a disk major alarm occurs.

System impact

The service processing capacity of the system might be affected.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

1.Check the disk status and resolve the issue.

2.If the issue persists, contact H3C Support.

hh3cEntityExtDiskAlarmClear

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.46	Disk major alarm cleared.	Recovery	Major	N/A (N/A)	ON

Notification triggers

This notification is generated when a disk major alarm is cleared.

System impact

No negative impact on services.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

No action is required.

hh3cEntityExtDiskWarningOccur

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.47	Disk warning alarm occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.48 (hh3cEntityExtDiskWarningClear)	ON

Notification triggers

This notification is generated when a disk warning alarm occurs.

System impact

The service processing capacity of the system might be affected.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

1.Check disk status and resolve the issue.

2.If the issue persists, contact H3C Support.

hh3cEntityExtDiskWarningClear

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.48	Disk warning alarm cleared.	Recovery	Warning	N/A (N/A)	ON

Notification triggers

This notification is generated when a disk warning alarm is cleared.

System impact

No negative impact on services.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

No action is required.

hh3cEntityExtOpticalFatalAlarmOccur

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.49	Transceiver critical alarm occurred.	Error	Critical	1.3.6.1.4.1.25506.2.6.4.0.50 (hh3cEntityExtOpticalFatalAlarmClear)	ON

Notification triggers

This notification is generated when a transceiver critical alarm occurs.

System impact

The service processing capacity of the system might be affected.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

1.Check the transceiver status and resolve the issue.

2.If the issue persists, contact H3C Support.

hh3cEntityExtOpticalFatalAlarmClear

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.50	Transceiver critical alarm cleared.	Recovery	Critical	N/A (N/A)	ON

Notification triggers

This notification is generated when a transceiver critical alarm is cleared.

System impact

No negative impact on services.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

No action is required.

hh3cEntityExtOpticalAlarmOccur

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.51	Transceiver major alarm occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.52 (hh3cEntityExtOpticalAlarmClear)	ON

Notification triggers

This notification is generated when a transceiver major alarm occurs.

System impact

The service processing capacity of the system might be affected.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

1.Check the transceiver status and resolve the issue.

2.If the issue persists, contact H3C Support.

hh3cEntityExtOpticalAlarmClear

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.52	Transceiver major alarm cleared.	Recovery	Major	N/A (N/A)	ON

Notification triggers

This notification is generated when a transceiver major alarm is cleared.

System impact

No negative impact on services.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

No action is required.

hh3cEntityExtOpticalWarningOccur

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.53	Transceiver warning alarm occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.54 (hh3cEntityExtOpticalWarningClear)	ON

Notification triggers

This notification is generated when a transceiver warning alarm occurs.

System impact

The service processing capacity of the system might be affected.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

1.Check the transceiver status and resolve the issue.

2.If the issue persists, contact H3C Support.

hh3cEntityExtOpticalWarningClear

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.54	Transceiver warning alarm cleared.	Recovery	Warning	N/A (N/A)	ON

Notification triggers

This notification is generated when a transceiver warning alarm is cleared.

System impact

No negative impact on services.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

No action is required.

hh3cEntityExtInternalLinkFatalAlarmOccur

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.55	Internal link critical alarm occurred.	Error	Critical	1.3.6.1.4.1.25506.2.6.4.0.56 (hh3cEntityExtInternalLinkFatalAlarmClear)	ON

Notification triggers

This notification is generated when an internal link critical alarm occurs.

System impact

The service processing capacity of the system might be affected.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

1.Check the internal link status and resolve the issue.

2.If the issue persists, contact H3C Support.

hh3cEntityExtInternalLinkFatalAlarmClear

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.56	Internal link critical alarm cleared.	Recovery	Critical	N/A (N/A)	ON

Notification triggers

This notification is generated when an internal link critical alarm is cleared.

System impact

No negative impact on services.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

No action is required.

hh3cEntityExtInternalLinkAlarmOccur

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.57	Internal link major alarm occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.58 (hh3cEntityExtInternalLinkAlarmClear)	ON

Notification triggers

This notification is generated when an internal link major alarm occurs.

System impact

The service processing capacity of the system might be affected.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

1.Check the internal link status and resolve the issue.

2.If the issue persists, contact H3C Support.

hh3cEntityExtInternalLinkAlarmClear

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.58	Internal link major alarm cleared.	Recovery	Major	N/A (N/A)	ON

Notification triggers

This notification is generated when an internal link major alarm is cleared.

System impact

No negative impact on services.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

No action is required.

hh3cEntityExtInternalLinkWarningOccur

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.59	Internal link warning alarm occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.60 (hh3cEntityExtInternalLinkWarningClear)	ON

Notification triggers

This notification is generated when an internal link warning alarm occurs.

System impact

The service processing capacity of the system might be affected.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

1.Check the internal link status and resolve the issue.

2.If the issue persists, contact H3C Support.

hh3cEntityExtInternalLinkWarningClear

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.60	Internal link warning alarm cleared.	Recovery	Warning	N/A (N/A)	ON

Notification triggers

This notification is generated when an internal link warning alarm is cleared.

System impact

No negative impact on services.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	hh3cEntityExtPhysicalIndex	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	entPhysicalIndex	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.1 (hh3cEntityExtRelativeResource)	Location information of the entity.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1.2 (hh3cEntityExtErrorCode)	Error code.	N/A	Integer32	Standard MIB values.
1.3.6.1.4.1.25506.2.6.4.1.3 (hh3cEntityExtReason)	Failure reason description.	N/A	OCTECT STRING	OCTET STRING (SIZE (0..255))

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=10433003)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when access to a temperature sensor fails. (hh3cEntityExtErrorCode=10433003): $1 temperature chip became faulty.

System impact

A temperature anomaly is present on the device.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Check temperature information and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtBoardAlarmClear(hh3cEntityExtErrorCode=10433003)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the temperature sensor access failure is fixed. (hh3cEntityExtErrorCode=10433003): $1 temperature chip restored to normal.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtTemperatureAlarmOccur(hh3cEntityExtErrorCode=10433004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.33	A major temperature fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.34 (hh3cEntityExtTemperatureAlarmClear)	ON

Notification triggers

This notification is generated when the temperature reading of a sensor goes out of range. (hh3cEntityExtErrorCode=10433004): $1 temperature out of range.

System impact

A temperature anomaly is present on the device.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

To resolve the issue:

1.Check temperature information and take actions to resolve any identified issues.

2.If the issue persists, contact H3C Support.

hh3cEntityExtTemperatureAlarmClear(hh3cEntityExtErrorCode=10433004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.34	A major temperature fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when a temperature out of range issue is cleared. (hh3cEntityExtErrorCode=10433004): $1 temperature out of range issue removed.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

No action is required.

hh3cEntityExtFanAlarmOccur(hh3cEntityExtErrorCode=10300001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.21	A major fan tray fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.22 (hh3cEntityExtFanAlarmClear)	ON

Notification triggers

This notification is generated when a fan tray fails. (hh3cEntityExtErrorCode=10300001): Fan tray %s failed.

System impact

A fan tray anomaly is present on the device.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Check the fan tray status and take actions to resolve any identified issues.

2.If the issue persists, contact H3C Support.

hh3cEntityExtFanAlarmClear(hh3cEntityExtErrorCode=10300001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.22	A major fan tray fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when a fan tray recovers from a failure. (hh3cEntityExtErrorCode=10300001): Fan tray $1 recovered.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtFanAlarmOccur(hh3cEntityExtErrorCode=10300002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.21	A major fan tray fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.22 (hh3cEntityExtFanAlarmClear)	ON

Notification triggers

This notification is generated when the speed of a fan tray falls below the lower speed threshold. (hh3cEntityExtErrorCode=10300002): Fan $1 speed fell below the lower speed threshold.

System impact

A fan tray anomaly is present on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Check the fan tray status and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtFanAlarmClear(hh3cEntityExtErrorCode=10300002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.22	A major fan tray fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the speed of a fan tray increases to the normal range. (hh3cEntityExtErrorCode=10300002): Fan $1 speed increased to the normal range.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtFanAlarmOccur(hh3cEntityExtErrorCode=10300008)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.21	A major fan tray fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.22 (hh3cEntityExtFanAlarmClear)	ON

Notification triggers

This notification is generated when the speed of a fan tray falls below the configured speed. (hh3cEntityExtErrorCode=10300008): Fan speed deviated largely from the configured value: Actual speed = $1 RPM, Configured speed = $2 RPM.

System impact

A fan tray anomaly is present on the device.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Check the fan tray status and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtFanAlarmClear(hh3cEntityExtErrorCode=10300008)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.22	A major fan tray fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the speed of a fan tray increase to the configured speed. (hh3cEntityExtErrorCode=10300008): Fan speed calibrated with the configured value: Actual speed = $1 RPM, Configured speed = $2 RPM.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtFanAlarmOccur(hh3cEntityExtErrorCode=20300008)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.21	A major fan tray fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.22 (hh3cEntityExtFanAlarmClear)	ON

Notification triggers

This notification is generated when the speed of a fan tray exceeds the configured speed. (hh3cEntityExtErrorCode=20300008): Fan speed deviated largely from the configured value: Actual speed = $1 RPM, Configured speed = $2 RPM.

System impact

A fan tray anomaly is present on the device.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Check the status of the fan tray and take actions to resolve any identified issues.

2.If the issue persists, contact H3C Support for help.

hh3cEntityExtFanAlarmClear(hh3cEntityExtErrorCode=20300008)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.22	A major fan tray fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the speed of a fan tray drops to the configured speed. (hh3cEntityExtErrorCode=20300008): Fan speed calibrated with the configured value: Actual speed = $1 RPM, Configured speed = $2 RPM.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=30441001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when read/write to the fan tray EEPROM fails. (hh3cEntityExtErrorCode=30441001): EEPROM read/write failed.

System impact

Fan tray manufacturing information cannot be retrieved.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue, contact H3C Support.

hh3cEntityExtBoardAlarmClear(hh3cEntityExtErrorCode=30441001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the system restores read/write to the fan tray EEPROM. (hh3cEntityExtErrorCode=30441001):EEPROM read/write recovered.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtPowerAlarmOccur(hh3cEntityExtErrorCode=10200012)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.15	A major power fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.15 (hh3cEntityExtPowerAlarmClear)	ON

Notification triggers

This notification is generated when no sufficient power is present to power on a card. (hh3cEntityExtErrorCode=10200012): No enough power to power on the board in chassis $1 slot $2. Required power is $3 W, available power is $4 W.

System impact

The card cannot start.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue, replace the power supplies with high-power ones.

hh3cEntityExtPowerAlarmClear(hh3cEntityExtErrorCode=10200012)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.16	A major power fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the insufficient power issue is cleared. (hh3cEntityExtErrorCode=10200012): Chassis $1 recovered from insufficient power capacity.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtPowerAlarmOccur(hh3cEntityExtErrorCode=10200011)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.15	A major power fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.15 (hh3cEntityExtPowerAlarmClear)	ON

Notification triggers

This notification is generated when redundant power is detected insufficient. (hh3cEntityExtErrorCode=10200011): Power redundancy in chassis $1 failed. Required redundant power is$2 W, redundant power is $3 W.

System impact

The cards might be powered off.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue, replace the power supplies with high-power ones.

hh3cEntityExtPowerAlarmClear(hh3cEntityExtErrorCode=10200011)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.16	A major power fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the insufficient redundant power issue is cleared. (hh3cEntityExtErrorCode=10200011): Chassis $1 recovered from power redundancy failure.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtPowerAlarmOccur(hh3cEntityExtErrorCode=10200024)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.15	A major power fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.15 (hh3cEntityExtPowerAlarmClear)	ON

Notification triggers

This notification is generated when power supplies of different models are installed on the same device. (hh3cEntityExtErrorCode=10200024): Inconsistent power supply models.

System impact

Power supply failure might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue, install power supplies of the same model on the device.

hh3cEntityExtPowerAlarmClear(hh3cEntityExtErrorCode=10200024)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.16	A major power fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the power supply model inconsistency issue is cleared. (hh3cEntityExtErrorCode=10200024): Power supply model inconsistency issue removed.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtPowerAlarmOccur(hh3cEntityExtErrorCode=10200003)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.15	A major power fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.15 (hh3cEntityExtPowerAlarmClear)	ON

Notification triggers

This notification is generated when an unknown power supply is detected. (hh3cEntityExtErrorCode=10200003): Unknown power supply $1.

System impact

A power supply anomaly is present on the device.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue, contact H3C Support.

hh3cEntityExtPowerAlarmClear(hh3cEntityExtErrorCode=10200003)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.16	A major power fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the unknown power supply issue is cleared. (hh3cEntityExtErrorCode=10200003):Unknown power supply $1 error removed.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=40441001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when read/write to the power supply EEPROM fails. (hh3cEntityExtErrorCode=40441001):EEPROM read/write failed.

System impact

Power supply manufacturing information cannot be retrieved.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue, contact H3C Support.

hh3cEntityExtBoardAlarmClear(hh3cEntityExtErrorCode=40441001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the system restored read/write to the power supply EEPROM. (hh3cEntityExtErrorCode=40441001):EEPROM read/write recovered.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardFatalAlarmOccur(hh3cEntityExtErrorCode=10400006)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.7	A critical card fault occurred.	Error	Critical	1.3.6.1.4.1.25506.2.6.4.0.8 (hh3cEntityExtBoardFatalAlarmClear)	ON

Notification triggers

This notification is generated when a card is powered off because of overtemperature. (hh3cEntityExtErrorCode=10400006):The card in slot $1 was powered off because the temperature exceeded the high temperature shutdown threshold.

System impact

The temperature of the device is too high and the cards are powered off.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue, check the ambient temperature in the equipment room and fan tray status and take actions to resolve any issues identified.

hh3cEntityExtBoardFatalAlarmClear(hh3cEntityExtErrorCode=10400006)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.8	A critical card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the temperature of a card drops to the normal range. (hh3cEntityExtErrorCode=10400006): The temperature of the card in slot $1 restored.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardWarningOccur(hh3cEntityExtErrorCode=10400004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.11	A card warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.12 (hh3cEntityExtBoardWarningClear)	ON

Notification triggers

This notification is generated when the standby MPU fails registration with the system because its main OEM is inconsistent with that of the active MPU. (hh3cEntityExtErrorCode=10400004): Card in slot $1 failed to register with the system.

System impact

The standby MPU cannot startup correctly.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue, contact H3C Support.

hh3cEntityExtBoardWarningClear(hh3cEntityExtErrorCode=10400004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.12	A card warning was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the main OEM inconsistency between the standby and the active MPU is cleared and the standby MPU registers with the system successfully. (hh3cEntityExtErrorCode=10400004): Card in slot $1 registered with the system successfully.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardWarningOccur(hh3cEntityExtErrorCode=20400004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.11	A card warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.12 (hh3cEntityExtBoardWarningClear)	ON

Notification triggers

This notification is generated when a service module fails to register with the system because its main OEM is consistent with that of the active MPU. (hh3cEntityExtErrorCode=20400004): Card in slot $1 failed to register with the system.

System impact

The service module fails to start up correctly.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue, contact H3C Support.

hh3cEntityExtBoardWarningClear(hh3cEntityExtErrorCode=20400004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.12	A card warning was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the main OEM inconsistency between an interface module and the active MPU is cleared and the interface module registers with the system successfully. (hh3cEntityExtErrorCode=20400004): Card in slot $1 registered with the system successfully.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardWarningOccur(hh3cEntityExtErrorCode=30400004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.11	A card warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.12 (hh3cEntityExtBoardWarningClear)	ON

Notification triggers

This notification is generated when a card fails to register with the system because the card is incompatible with the device.(hh3cEntityExtErrorCode=30400004): Card in slot $1 failed to register with the system.

System impact

The card fails to start up correctly.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue, install the card on a device with which it is compatible.

hh3cEntityExtBoardWarningClear(hh3cEntityExtErrorCode=30400004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.12	A card warning was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when incompatibility of a card with the device is cleared and the card registers with the system successfully. (hh3cEntityExtErrorCode=30400004): Card in slot $1 registered with the system successfully.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtSystemWarningOccur(hh3cEntityExtErrorCode=10100005)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.5	A system warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.6 (hh3cEntityExtSystemWarningClear)	ON

Notification triggers

This notification is generated when the type of a card is detected inconsistent with the preconfigured type. (hh3cEntityExtErrorCode=10100005): Board type inconsistent with the preconfigured type.

System impact

The card fails to start up correctly.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue, replace the card with one of the preconfigured type.

hh3cEntityExtSystemWarningClear(hh3cEntityExtErrorCode=10100005)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.6	A system warning was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when inconsistency of a card type with the preconfigure type is cleared. (hh3cEntityExtErrorCode=10100005): Board type consistent with the preconfigured type.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardFatalAlarmOccur(hh3cEntityExtErrorCode=10429001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.7	A critical card fault occurred.	Error	Critical	1.3.6.1.4.1.25506.2.6.4.0.8 (hh3cEntityExtBoardFatalAlarmClear)	ON

Notification triggers

This notification is generated when read/write to the base card CPLD on the MPU fails. (hh3cEntityExtErrorCode=10429001): CPLD register read/write failed.

System impact

A hardware failure is detected, and a service failure might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue, contact H3C Support.

hh3cEntityExtBoardFatalAlarmClear(hh3cEntityExtErrorCode=10429001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.8	A critical card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the system restores read/write to the base card CPLD on the MPU. (hh3cEntityExtErrorCode=10429001): CPLD register read/write recovered.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardFatalAlarmOccur(hh3cEntityExtErrorCode=20429001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.7	A critical card fault occurred.	Error	Critical	1.3.6.1.4.1.25506.2.6.4.0.8 (hh3cEntityExtBoardFatalAlarmClear)	ON

Notification triggers

This notification is generated when read/write to the daughter card CPLD on the MPU fails. (hh3cEntityExtErrorCode=20429001): CPLD register read/write failed.

System impact

A hardware failure is detected, and a service failure might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue, contact H3C Support.

hh3cEntityExtBoardFatalAlarmClear(hh3cEntityExtErrorCode=20429001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.8	A critical card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the system restores read/write to the daughter card CPLD on the MPU. (hh3cEntityExtErrorCode=20429001): CPLD register read/write recovered.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardFatalAlarmOccur(hh3cEntityExtErrorCode=30429001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.7	A critical card fault occurred.	Error	Critical	1.3.6.1.4.1.25506.2.6.4.0.8 (hh3cEntityExtBoardFatalAlarmClear)	ON

Notification triggers

This notification is generated when read/write to the base card CPLD on a switching fabric module fails. (hh3cEntityExtErrorCode=30429001): CPLD register read/write failed.

System impact

A hardware failure is detected, and a service failure might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue, contact H3C Support.

hh3cEntityExtBoardFatalAlarmClear(hh3cEntityExtErrorCode=30429001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.8	A critical card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the system restores read/write to the based card CPLD on a switching fabric module. (hh3cEntityExtErrorCode=30429001): CPLD register read/write recovered.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardFatalAlarmOccur(hh3cEntityExtErrorCode=40429001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.7	A critical card fault occurred.	Error	Critical	1.3.6.1.4.1.25506.2.6.4.0.8 (hh3cEntityExtBoardFatalAlarmClear)	ON

Notification triggers

This notification is generated when read/write to the daughter card CPLD on a switching fabric module fails. (hh3cEntityExtErrorCode=40429001): CPLD register read/write failed.

System impact

A hardware failure is detected, and a service failure might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue, contact H3C Support.

hh3cEntityExtBoardFatalAlarmClear(hh3cEntityExtErrorCode=40429001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.8	A critical card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the system restores read/write to the daughter card CPLD on a switching fabric module. (hh3cEntityExtErrorCode=40429001): CPLD register read/write recovered.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardFatalAlarmOccur(hh3cEntityExtErrorCode=50429001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.7	A critical card fault occurred.	Error	Critical	1.3.6.1.4.1.25506.2.6.4.0.8 (hh3cEntityExtBoardFatalAlarmClear)	ON

Notification triggers

This notification is generated when read/write to the base card CPLD on a service module fails. (hh3cEntityExtErrorCode=50429001): CPLD register read/write failed.

System impact

A hardware failure is detected, and a service failure might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue, contact H3C Support.

hh3cEntityExtBoardFatalAlarmClear(hh3cEntityExtErrorCode=50429001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.8	A critical card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the system restores read/write to the based card CPLD on a service module. (hh3cEntityExtErrorCode=50429001): CPLD register read/write recovered.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardFatalAlarmOccur(hh3cEntityExtErrorCode=60429001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.7	A critical card fault occurred.	Error	Critical	1.3.6.1.4.1.25506.2.6.4.0.8 (hh3cEntityExtBoardFatalAlarmClear)	ON

Notification triggers

This notification is generated when read/write to the daughter card CPLD on a service module fails. (hh3cEntityExtErrorCode=60429001): CPLD register read/write failed.

System impact

A hardware failure is detected, and a service failure might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue, contact H3C Support.

hh3cEntityExtBoardFatalAlarmClear(hh3cEntityExtErrorCode=60429001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.8	A critical card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the system restores read/write to the daughter card CPLD on a service module. (hh3cEntityExtErrorCode=60429001): CPLD register read/write recovered.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=10420001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when access to a power monitoring chip on a card fails (hh3cEntityExtErrorCode=10420001): Failed to access voltage chip channel $1 on $2 chip $3.

System impact

A hardware failure is detected, and a service failure might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue, contact H3C Support.

hh3cEntityExtBoardAlarmClear(hh3cEntityExtErrorCode=10420001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the system restores access to a power monitoring chip on a card. (hh3cEntityExtErrorCode=10420001): Restored access to voltage chip channel $1 on $2 chip $3.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=10430001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when access to the RTC fails. (hh3cEntityExtErrorCode=10430001): RTC read/write failed.

System impact

A hardware failure is detected, and a service failure might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue, contact H3C Support.

hh3cEntityExtBoardAlarmClear(hh3cEntityExtErrorCode=10430001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the system restore the access to the RTC chip. (hh3cEntityExtErrorCode=10430001): RTC read/write recovered.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=10430002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when the RTC voltage is detected low. (hh3cEntityExtErrorCode=10430002): RTC voltage low.

System impact

A hardware failure is detected, and a service failure might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue, contact H3C Support.

hh3cEntityExtBoardAlarmClear(hh3cEntityExtErrorCode=10430002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the RTC voltage of a card restores to the normal range. (hh3cEntityExtErrorCode=10430002): RTC voltage increased to the acceptable range.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=10441001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred..	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when read/write to the card EEPROM fails. (hh3cEntityExtErrorCode=10441001): EEPROM read/write failed.

System impact

A hardware failure is detected, and a service failure might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue, contact H3C Support.

hh3cEntityExtBoardAlarmClear(hh3cEntityExtErrorCode=10441001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the system restores access to the card EEPROM. (hh3cEntityExtErrorCode=10441001): EEPROM read/write recovered.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=60440009)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when an FPGA SEU error occurs on a card. (hh3cEntityExtErrorCode=60440009): FPGA SEU error.

System impact

A hardware failure is detected, and a service failure might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue, contact H3C Support.

hh3cEntityExtBoardAlarmClear(hh3cEntityExtErrorCode=60440009)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the FPGA SEU error is removed from a card. (hh3cEntityExtErrorCode=60440009): FPGA SEU error removed.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=10443001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when read/write to the EMMC fails. (hh3cEntityExtErrorCode=10443001): EMMC read/write failed.

System impact

A hardware failure is detected, and a service failure might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue, contact H3C Support.

hh3cEntityExtBoardAlarmClear(hh3cEntityExtErrorCode=10443001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the system restores access to the EMMC. (hh3cEntityExtErrorCode=10443001): EMMC read/write recovered.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtClockAlarmOccur(hh3cEntityExtErrorCode=100432022)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.39	A major clock fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.40 (hh3cEntityExtClockAlarmClear)	ON

Notification triggers

This notification is generated when the clock PLL chip goes out of lock. (hh3cEntityExtErrorCode=100432022): Clock PLL chip unlocked.

System impact

The clock status is abnormal.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Check the clock status and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtClockAlarmClear(hh3cEntityExtErrorCode=100432022)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.40	A major clock fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the clock PLL chip restores to the locked status. (hh3cEntityExtErrorCode=100432022): Clock PLL chip locked.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtSystemWarningOccur(hh3cEntityExtErrorCode=10100033)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.5	A system warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.6 (hh3cEntityExtSystemWarningClear)	ON

Notification triggers

This notification is generated when two or more switching fabric module models mixed installation of which is not allowed are installed on the same device. (hh3cEntityExtErrorCode=10100033): Inconsistent SFC type.

System impact

The cards fail to start up correctly.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Check the card types and ensure compatibility between switching fabric modules.

2.If the issue persists, contact H3C Support.

hh3cEntityExtSystemWarningClear(hh3cEntityExtErrorCode=10100033)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.6	A system warning was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the inconsistent switching fabric module model issue is cleared. (hh3cEntityExtErrorCode=10100033): Inconsistent SFC type error removed.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtSystemWarningOccur(hh3cEntityExtErrorCode=20100033)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.5	A system warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.6 (hh3cEntityExtSystemWarningClear)	ON

Notification triggers

This notification is generated when interface module and switching fabric module incompatibility occurs on the device. (hh3cEntityExtErrorCode=20100033): Inconsistent SFC type.

System impact

The cards fail to start up correctly.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Check the card types and ensure interface module and switching fabric module incompatibility.

2.If the issue persists, contact H3C Support.

hh3cEntityExtSystemWarningClear(hh3cEntityExtErrorCode=20100033)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.6	A system warning was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when interface module and switching fabric module incompatibility is cleared. (hh3cEntityExtErrorCode=20100033): Inconsistent SFC type error removed.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtSystemWarningOccur(hh3cEntityExtErrorCode=10482009)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.5	A system warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.6 (hh3cEntityExtSystemWarningClear)	ON

Notification triggers

This notification is generated when an active/standby management interface switchover occurs. (hh3cEntityExtErrorCode=1010482009): The active management interface port went down, and the standby management interface port took over.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Check the original active management interface and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtSystemWarningClear(hh3cEntityExtErrorCode=1010482009)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.6	A system warning was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the original management interface takes back the active role. (hh3cEntityExtErrorCode=1010482009): The original management interface port came up and assumed the active role.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=50441001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when read/write to the chassis EEPROM fails. (hh3cEntityExtErrorCode=50441001): EEPROM read/write failed.

System impact

The chassis manufacturing information cannot be retrieved.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue, contact H3C Support.

hh3cEntityExtBoardAlarmClear(hh3cEntityExtErrorCode=50441001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the system restores read/write to the chassis EEPROM. (hh3cEntityExtErrorCode=50441001): EEPROM read/write recovered.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtVoltageWarningOccur(hh3cEntityExtErrorCode=10420002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.29	A voltage warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.30 (hh3cEntityExtVoltageWarningClear)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin VP1 on a card falls below the lower output voltage warning threshold. (hh3cEntityExtErrorCode=10420002): Voltage on voltage chip channel $1 ($2) on the card $3 lower than the low output voltage warning threshold.

System impact

A hardware failure is detected, and a service failure might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

To resolve the issue:

1.Check voltage information and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtVoltageWarningClear(hh3cEntityExtErrorCode=10420002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.30	A voltage warning was cleared	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin VP1 on a card increases above the low output voltage warning threshold. (hh3cEntityExtErrorCode=10420002): Voltage on voltage chip channel $1 ($2) on the card $3 increased above the low output voltage warning threshold.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

No action is required.

hh3cEntityExtVoltageWarningOccur(hh3cEntityExtErrorCode=20420002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.29	A voltage warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.30 (hh3cEntityExtVoltageWarningClear)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin VP2 on a card falls below the low output voltage warning threshold. (hh3cEntityExtErrorCode=20420002): Voltage on voltage chip channel $1 ($2) on the card $3 lower than the low output voltage warning threshold.

System impact

A hardware failure is detected, and a service failure might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

To resolve the issue:

1.Check voltage information and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtVoltageWarningClear(hh3cEntityExtErrorCode=20420002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.30	A voltage warning was cleared	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin VP2 on a card increases above the low output voltage warning threshold. (hh3cEntityExtErrorCode=20420002): Voltage on voltage chip channel $1 ($2) on the card $3 increased above the low output voltage warning threshold.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

No action is required.

hh3cEntityExtVoltageWarningOccur(hh3cEntityExtErrorCode=30420002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.29	A voltage warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.30 (hh3cEntityExtVoltageWarningClear)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin VP3 on a card falls below the low output voltage warning threshold. (hh3cEntityExtErrorCode=30420002): Voltage on voltage chip channel $1 ($2) on the card $3 lower than the low output voltage warning threshold.

System impact

A hardware failure is detected, and a service failure might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

To resolve the issue:

1.Check voltage information and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtVoltageWarningClear(hh3cEntityExtErrorCode=30420002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.30	A voltage warning was cleared	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin VP3 on a card increases above the low output voltage warning threshold. (hh3cEntityExtErrorCode=30420002): Voltage on voltage chip channel $1 ($2) on the card $3 increased above the low output voltage warning threshold.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

No action is required.

hh3cEntityExtVoltageWarningOccur(hh3cEntityExtErrorCode=40420002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.29	A voltage warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.30 (hh3cEntityExtVoltageWarningClear)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin VP4 on a card falls below the low output voltage warning threshold. (hh3cEntityExtErrorCode=40420002): Voltage on voltage chip channel $1 ($2) on the card $3 lower than the low output voltage warning threshold.

System impact

A hardware failure is detected, and a service failure might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

To resolve the issue:

1.Check voltage information and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtVoltageWarningClear(hh3cEntityExtErrorCode=40420002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.30	A voltage warning was cleared	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin VP4 on a card increases above the low output voltage warning threshold. (hh3cEntityExtErrorCode=40420002): Voltage on voltage chip channel $1 ($2) on the card $3 increased above the low output voltage warning threshold.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

No action is required.

hh3cEntityExtVoltageWarningOccur(hh3cEntityExtErrorCode=50420002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.29	A voltage warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.30 (hh3cEntityExtVoltageWarningClear)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin VH on a card falls below the low output voltage warning threshold. (hh3cEntityExtErrorCode=50420002): Voltage on voltage chip channel $1 ($2) on the card $3 lower than the low output voltage warning threshold.

System impact

A hardware failure is detected, and a service failure might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

To resolve the issue:

1.Check voltage information and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtVoltageWarningClear(hh3cEntityExtErrorCode=50420002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.30	A voltage warning was cleared	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin VH on a card increases above the low output voltage warning threshold. (hh3cEntityExtErrorCode=50420002): Voltage on voltage chip channel $1 ($2) on the card $3 increased above the low output voltage warning threshold.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

No action is required.

hh3cEntityExtVoltageWarningOccur(hh3cEntityExtErrorCode=60420002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.29	A voltage warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.30 (hh3cEntityExtVoltageWarningClear)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin VX1 on a card falls below the low output voltage warning threshold. (hh3cEntityExtErrorCode=60420002): Voltage on voltage chip channel $1 ($2) on the card $3 lower than the low output voltage warning threshold.

System impact

A hardware failure is detected, and a service failure might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

To resolve the issue:

1.Check voltage information and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtVoltageWarningClear(hh3cEntityExtErrorCode=60420002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.30	A voltage warning was cleared	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin VX1 on a card increase above the low output voltage warning threshold. (hh3cEntityExtErrorCode=60420002): Voltage on voltage chip channel $1 ($2) on the card $3 increased above the low output voltage warning threshold.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

No action is required.

hh3cEntityExtVoltageWarningOccur(hh3cEntityExtErrorCode=70420002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.29	A voltage warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.30 (hh3cEntityExtVoltageWarningClear)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin VX2 on a card falls below the low output voltage warning threshold. (hh3cEntityExtErrorCode=70420002): Voltage on voltage chip channel $1 ($2) on the card $3 lower than the low output voltage warning threshold.

System impact

A hardware failure is detected, and a service failure might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

To resolve the issue:

1.Check voltage information and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtVoltageWarningClear(hh3cEntityExtErrorCode=70420002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.30	A voltage warning was cleared	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin VX2 on a card increases above the low output voltage warning threshold. (hh3cEntityExtErrorCode=70420002): Voltage on voltage chip channel $1 ($2) on the card $3 increased above the low output voltage warning threshold.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

No action is required.

hh3cEntityExtVoltageWarningOccur(hh3cEntityExtErrorCode=80420002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.29	A voltage warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.30 (hh3cEntityExtVoltageWarningClear)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin VX3 on a card falls below the low output voltage warning threshold. (hh3cEntityExtErrorCode=80420002): Voltage on voltage chip channel $1 ($2) on the card $3 lower than the low output voltage warning threshold.

System impact

A hardware failure is detected, and a service failure might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

To resolve the issue:

1.Check voltage information and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtVoltageWarningClear(hh3cEntityExtErrorCode=80420002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.30	A voltage warning was cleared	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin VX3 on a card increases above the low output voltage warning threshold. (hh3cEntityExtErrorCode=80420002): Voltage on voltage chip channel $1 ($2) on the card $3 increased above the low output voltage warning threshold.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

No action is required.

hh3cEntityExtVoltageWarningOccur(hh3cEntityExtErrorCode=90420002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.29	A voltage warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.30 (hh3cEntityExtVoltageWarningClear)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin VX4 on a card falls below the low output voltage warning threshold. (hh3cEntityExtErrorCode=90420002): Voltage on voltage chip channel $1 ($2) on the card $3 lower than the low output voltage warning threshold.

System impact

A hardware failure is detected, and a service failure might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

To resolve the issue:

1.Check voltage information and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtVoltageWarningClear(hh3cEntityExtErrorCode=90420002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.30	A voltage warning was cleared	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin VX4 on a card increases above the low output voltage warning threshold. (hh3cEntityExtErrorCode=90420002): Voltage on voltage chip channel $1 ($2) on the card $3 increased above the low output voltage warning threshold.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

No action is required.

hh3cEntityExtVoltageWarningOccur(hh3cEntityExtErrorCode=100420002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.29	A voltage warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.30 (hh3cEntityExtVoltageWarningClear)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin VX5 on a card falls below the low output voltage warning threshold. (hh3cEntityExtErrorCode=100420002): Voltage on voltage chip channel $1 ($2) on the card $3 lower than the low output voltage warning threshold.

System impact

A hardware failure is detected, and a service failure might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

To resolve the issue:

1.Check voltage information and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtVoltageWarningClear(hh3cEntityExtErrorCode=100420002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.30	A voltage warning was cleared	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin VX5 on a card increases above the low output voltage warning threshold. (hh3cEntityExtErrorCode=100420002): Voltage on voltage chip channel $1 ($2) on the card $3 increased above the low output voltage warning threshold.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

No action is required.

hh3cEntityExtVoltageWarningOccur(hh3cEntityExtErrorCode=110420002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.29	A voltage warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.30 (hh3cEntityExtVoltageWarningClear)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin AUX1 on a card falls below the low output voltage warning threshold. (hh3cEntityExtErrorCode=110420002): Voltage on voltage chip channel $1 ($2) on the card $3 lower than the low output voltage warning threshold.

System impact

A hardware failure is detected, and a service failure might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

To resolve the issue:

1.Check voltage information and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtVoltageWarningClear(hh3cEntityExtErrorCode=110420002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.30	A voltage warning was cleared	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin AUX1 on a card increases above the low output voltage warning threshold. (hh3cEntityExtErrorCode=110420002): Voltage on voltage chip channel $1 ($2) on the card $3 increased above the low output voltage warning threshold.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

No action is required.

hh3cEntityExtVoltageWarningOccur(hh3cEntityExtErrorCode=120420002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.29	A voltage warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.30 (hh3cEntityExtVoltageWarningClear)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin AUX2 on a card falls below the low output voltage warning threshold. (hh3cEntityExtErrorCode=120420002): Voltage on voltage chip channel $1 ($2) on the card $3 lower than the low output voltage warning threshold.

System impact

A hardware failure is detected, and a service failure might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

To resolve the issue:

1.Check voltage information and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtVoltageWarningClear(hh3cEntityExtErrorCode=120420002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.30	A voltage warning was cleared	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin AUX2 on a card increases above the low output voltage warning threshold. (hh3cEntityExtErrorCode=120420002): Voltage on voltage chip channel $1 ($2) on the card $3 increased above the low output voltage warning threshold.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

No action is required.

hh3cEntityExtVoltageWarningOccur(hh3cEntityExtErrorCode=10420004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.29	A voltage warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.30 (hh3cEntityExtVoltageWarningClear)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin VP1 on a card exceeds the high output voltage warning threshold. (hh3cEntityExtErrorCode=10420004): Voltage on voltage chip channel $1 ($2) on the card $3 exceeded the high output voltage warning threshold.

System impact

A hardware failure is detected, and a service failure might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

To resolve the issue:

1.Check voltage information and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtVoltageWarningClear(hh3cEntityExtErrorCode=10420004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.30	A voltage warning was cleared	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin VP1 on a card falls below the high output voltage warning threshold. (hh3cEntityExtErrorCode=10420004): Voltage on voltage chip channel $1 ($2) on the card $3 fell below the high output voltage warning threshold.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

No action is required.

hh3cEntityExtVoltageWarningOccur(hh3cEntityExtErrorCode=20420004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.29	A voltage warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.30 (hh3cEntityExtVoltageWarningClear)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin VP2 on a card exceeds the high output voltage warning threshold. (hh3cEntityExtErrorCode=20420004): Voltage on voltage chip channel $1 ($2) on the card $3 exceeded the high output voltage warning threshold.

System impact

A hardware failure is detected, and a service failure might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

To resolve the issue:

1.Check voltage information and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtVoltageWarningClear(hh3cEntityExtErrorCode=20420004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.30	A voltage warning was cleared	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin VP2 on a card falls below the high output voltage warning threshold. (hh3cEntityExtErrorCode=20420004): Voltage on voltage chip channel $1 ($2) on the card $3 fell below the high output voltage warning threshold.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

No action is required.

hh3cEntityExtVoltageWarningOccur(hh3cEntityExtErrorCode=30420004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.29	A voltage warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.30 (hh3cEntityExtVoltageWarningClear)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin VP3 on a card exceeds the high output voltage warning threshold. (hh3cEntityExtErrorCode=30420004): Voltage on voltage chip channel $1 ($2) on the card $3 exceeded the high output voltage warning threshold.

System impact

A hardware failure is detected, and a service failure might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

To resolve the issue:

1.Check voltage information and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtVoltageWarningClear(hh3cEntityExtErrorCode=30420004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.30	A voltage warning was cleared	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin VP3 on a card falls below the high output voltage warning threshold. (hh3cEntityExtErrorCode=30420004): Voltage on voltage chip channel $1 ($2) on the card $3 fell below the high output voltage warning threshold.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

No action is required.

hh3cEntityExtVoltageWarningOccur(hh3cEntityExtErrorCode=40420004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.29	A voltage warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.30 (hh3cEntityExtVoltageWarningClear)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin VP4 on a card exceeds the high output voltage warning threshold. (hh3cEntityExtErrorCode=40420004): Voltage on voltage chip channel $1 ($2) on the card $3 exceeded the high output voltage warning threshold.

System impact

A hardware failure is detected, and a service failure might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

To resolve the issue:

1.Check voltage information and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtVoltageWarningClear(hh3cEntityExtErrorCode=40420004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.30	A voltage warning was cleared	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin VP4 on a card falls below the high output voltage warning threshold. (hh3cEntityExtErrorCode=40420004): Voltage on voltage chip channel $1 ($2) on the card $3 fell below the high output voltage warning threshold.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

No action is required.

hh3cEntityExtVoltageWarningOccur(hh3cEntityExtErrorCode=50420004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.29	A voltage warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.30 (hh3cEntityExtVoltageWarningClear)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin VH on a card exceeds the high output voltage warning threshold. (hh3cEntityExtErrorCode=50420004): Voltage on voltage chip channel $1 ($2) on the card $3 exceeded the high output voltage warning threshold.

System impact

A hardware failure is detected, and a service failure might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

To resolve the issue:

1.Check voltage information and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtVoltageWarningClear(hh3cEntityExtErrorCode=50420004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.30	A voltage warning was cleared	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin VH on a card falls below the high output voltage warning threshold. (hh3cEntityExtErrorCode=50420004): Voltage on voltage chip channel $1 ($2) on the card $3 fell below the high output voltage warning threshold.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

No action is required.

hh3cEntityExtVoltageWarningOccur(hh3cEntityExtErrorCode=60420004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.29	A voltage warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.30 (hh3cEntityExtVoltageWarningClear)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin VX1 on a card exceeds the high output voltage warning threshold. (hh3cEntityExtErrorCode=60420004): Voltage on voltage chip channel $1 ($2) on the card $3 exceeded the high output voltage warning threshold.

System impact

A hardware failure is detected, and a service failure might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

To resolve the issue:

1.Check voltage information and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtVoltageWarningClear(hh3cEntityExtErrorCode=60420004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.30	A voltage warning was cleared	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin VX1 on a card falls below the high output voltage warning threshold. (hh3cEntityExtErrorCode=60420004): Voltage on voltage chip channel $1 ($2) on the card $3 fell below the high output voltage warning threshold.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

No action is required.

hh3cEntityExtVoltageWarningOccur(hh3cEntityExtErrorCode=70420004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.29	A voltage warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.30 (hh3cEntityExtVoltageWarningClear)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin VX2 on a card exceeds the high output voltage warning threshold. (hh3cEntityExtErrorCode=70420004): Voltage on voltage chip channel $1 ($2) on the card $3 exceeded the high output voltage warning threshold.

System impact

A hardware failure is detected, and a service failure might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

To resolve the issue:

1.Check voltage information and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtVoltageWarningClear(hh3cEntityExtErrorCode=70420004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.30	A voltage warning was cleared	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin VX2 on a card falls below the high output voltage warning threshold. (hh3cEntityExtErrorCode=70420004): Voltage on voltage chip channel $1 ($2) on the card $3 fell below the high output voltage warning threshold.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

No action is required.

hh3cEntityExtVoltageWarningOccur(hh3cEntityExtErrorCode=80420004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.29	A voltage warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.30 (hh3cEntityExtVoltageWarningClear)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin VX3 on a card exceeds the high output voltage warning threshold. (hh3cEntityExtErrorCode=80420004): Voltage on voltage chip channel $1 ($2) on the card $3 exceeded the high output voltage warning threshold.

System impact

A hardware failure is detected, and a service failure might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

To resolve the issue:

1.Check voltage information and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtVoltageWarningClear(hh3cEntityExtErrorCode=80420004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.30	A voltage warning was cleared	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin VX3 on a card falls below the high output voltage warning threshold. (hh3cEntityExtErrorCode=80420004): Voltage on voltage chip channel $1 ($2) on the card $3 fell below the high output voltage warning threshold.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

No action is required.

hh3cEntityExtVoltageWarningOccur(hh3cEntityExtErrorCode=90420004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.29	A voltage warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.30 (hh3cEntityExtVoltageWarningClear)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin VX4 on a card exceeds the high output voltage warning threshold. (hh3cEntityExtErrorCode=90420004): Voltage on voltage chip channel $1 ($2) on the card $3 exceeded the high output voltage warning threshold.

System impact

A hardware failure is detected, and a service failure might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

To resolve the issue:

1.Check voltage information and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtVoltageWarningClear(hh3cEntityExtErrorCode=90420004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.30	A voltage warning was cleared	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin VX4 on a card falls below the high output voltage warning threshold. (hh3cEntityExtErrorCode=90420004): Voltage on voltage chip channel $1 ($2) on the card $3 fell below the high output voltage warning threshold.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

No action is required.

hh3cEntityExtVoltageWarningOccur(hh3cEntityExtErrorCode=100420004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.29	A voltage warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.30 (hh3cEntityExtVoltageWarningClear)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin VX5 on a card exceeds the high output voltage warning threshold. (hh3cEntityExtErrorCode=100420004): Voltage on voltage chip channel $1 ($2) on the card $3 exceeded the high output voltage warning threshold.

System impact

A hardware failure is detected, and a service failure might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

To resolve the issue:

1.Check voltage information and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtVoltageWarningClear(hh3cEntityExtErrorCode=100420004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.30	A voltage warning was cleared	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin VX5 on a card falls below the high output voltage warning threshold. (hh3cEntityExtErrorCode=100420004): Voltage on voltage chip channel $1 ($2) on the card $3 fell below the high output voltage warning threshold.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

No action is required.

hh3cEntityExtVoltageWarningOccur(hh3cEntityExtErrorCode=110420004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.29	A voltage warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.30 (hh3cEntityExtVoltageWarningClear)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin AUX1 on a card exceeds the high output voltage warning threshold. (hh3cEntityExtErrorCode=110420004): Voltage on voltage chip channel $1 ($2) on the card $3 exceeded the high output voltage warning threshold.

System impact

A hardware failure is detected, and a service failure might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

To resolve the issue:

1.Check voltage information and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtVoltageWarningClear(hh3cEntityExtErrorCode=110420004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.30	A voltage warning was cleared	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin AUX1 on a card falls below the high output voltage warning threshold. (hh3cEntityExtErrorCode=110420004): Voltage on voltage chip channel $1 ($2) on the card $3 fell below the high output voltage warning threshold.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

No action is required.

hh3cEntityExtVoltageWarningOccur(hh3cEntityExtErrorCode=120420004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.29	A voltage warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.30 (hh3cEntityExtVoltageWarningClear)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin AUX2 on a card exceeds the high output voltage warning threshold. (hh3cEntityExtErrorCode=120420004): Voltage on voltage chip channel $1 ($2) on the card $3 exceeded the high output voltage warning threshold.

System impact

A hardware failure is detected, and a service failure might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

To resolve the issue:

1.Check voltage information and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtVoltageWarningClear(hh3cEntityExtErrorCode=120420004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.30	A voltage warning was cleared	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the output voltage of the voltage pin AUX2 on a card falls below the high output voltage warning threshold. (hh3cEntityExtErrorCode=120420004): Voltage on voltage chip channel $1 ($2) on the card $3 fell below the high output voltage warning threshold.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 4 (hh3cEntityExtThresholdType)	Threshold type.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 5 (hh3cEntityExtThresholdVal)	Threshold value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))
1.3.6.1.4.1.25506.2.6.4.1. 6 (hh3cEntityExtCurrentVal)	Current value.	N	OCTECT STRING	OCTET STRING (SIZE (0..63))

Recommended action

No action is required.

hh3cEntityExtBoardWarningOccur(hh3cEntityExtErrorCode=10100007

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.11	A card warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.12 (hh3cEntityExtBoardWarningClear)	ON

Notification triggers

This notification is generated when an unsupported subcard is installed in a slot on a card. (hh3cEntityExtErrorCode=10100007): Subcard not supported in the specified slot on the card.

System impact

The subcard cannot start up correctly.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue, replace the subcard with one supported by the slot.

hh3cEntityExtBoardWarningClear(hh3cEntityExtErrorCode=10100007

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.12	A card warning was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when subcard incompatibility with the slot is cleared. (hh3cEntityExtErrorCode=10100007): Subcard supported in the specified slot on the card.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtSystemWarningOccur(hh3cEntityExtErrorCode=20100005)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.5	A system warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.6 (hh3cEntityExtSystemWarningClear)	ON

Notification triggers

This notification is generated when a subcard type is detected inconsistent with the preconfigured type. (hh3cEntityExtErrorCode=20100005): Board type inconsistent with the preconfigured type.

System impact

The subcard cannot start up correctly.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

Replace the subcard with one consistent with the preconfigured model

hh3cEntityExtSystemWarningClear(hh3cEntityExtErrorCode=20100005)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.6	A system warning was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when subcard model inconsistency with the preconfigured model is cleared. (hh3cEntityExtErrorCode=20100005): Board type consistent with the preconfigured type.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtSystemWarningOccur(hh3cEntityExtErrorCode=10100006)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.5	A system warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.6 (hh3cEntityExtSystemWarningClear)	ON

Notification triggers

This notification is generated when the model of a newly installed subcard in a subcard slot is detected inconsistent with that of the original subcard. (hh3cEntityExtErrorCode=10100006): Current subcard model inconsistent with the previous subcard model.

System impact

The subcard cannot start up correctly.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue, use a subcard of the same model as the original subcard in the subslot.

hh3cEntityExtSystemWarningClear(hh3cEntityExtErrorCode=10100006)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.6	A system warning was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the model of the newly installed subcard is consistent with that of the original subcard. (hh3cEntityExtErrorCode=10100006): Current subcard model consistent with the previous subcard model.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=10540001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when FPGA loading on a subcard fails. (hh3cEntityExtErrorCode=10540001): FPGA on subcard loading failed.

System impact

The subcard cannot start up correctly.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Replace the faulty subcard.

2.If the issue persists, contact H3C Support.

hh3cEntityExtBoardAlarmClear(hh3cEntityExtErrorCode=10540001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the FPGA loading failure on a subcard is cleared. (hh3cEntityExtErrorCode=10540001): FPGA on subcard loading failure resolved.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=20420001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when access to a voltage monitoring chip on a subcard fails. (hh3cEntityExtErrorCode=20420001): Failed to access voltage chip channel $1 on $2 chip $3.

System impact

A hardware failure is detected, and a service failure might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

Contact H3C Support.

hh3cEntityExtBoardAlarmClear(hh3cEntityExtErrorCode=20420001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the system restores access to a voltage monitoring chip on a subcard (hh3cEntityExtErrorCode=20420001): Restored access to voltage chip channel $1 on $2 chip $3.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardFatalAlarmOccur(hh3cEntityExtErrorCode=70429001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.7	A critical card fault occurred.	Error	Critical	1.3.6.1.4.1.25506.2.6.4.0.8 (hh3cEntityExtBoardFatalAlarmClear)	ON

Notification triggers

This notification is generated when read/write to the CPLD on a subcard fails. (hh3cEntityExtErrorCode=70429001): CPLD register read/write failed.

System impact

A hardware failure is detected, and a service failure might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

Contact H3C Support.

hh3cEntityExtBoardFatalAlarmClear(hh3cEntityExtErrorCode=70429001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.8	A critical fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the system restores read/write to the CPLD on a subcard (hh3cEntityExtErrorCode=70429001): CPLD register read/write recovered.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=20441001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when read/write to the EEPROM on a subcard fails. (hh3cEntityExtErrorCode=20441001): EEPROM read/write failed.

System impact

A hardware failure is detected, and a service failure might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue, contact H3C Support.

hh3cEntityExtBoardAlarmClear(hh3cEntityExtErrorCode=20441001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the system restores read/write to the EEPROM on a subcard. (hh3cEntityExtErrorCode=20441001): EEPROM read/write recovered.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=10400005)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when a subcard fails to power on. (hh3cEntityExtErrorCode=10400005): Board failed to power up.

System impact

The subcard cannot start up correctly.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Replace the faulty subcard.

2.If the issue persists, contact H3C Support.

hh3cEntityExtBoardAlarmClear(hh3cEntityExtErrorCode=10400005)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when a subcard powers on successfully after a power-on failure. (hh3cEntityExtErrorCode=10400005): Board powered up.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtClockAlarmOccur(hh3cEntityExtErrorCode=10432019)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.39	A major clock fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.40 (hh3cEntityExtClockAlarmClear)	ON

Notification triggers

This notification is generated when an error occurs on the GPS downstream ToD signals. (hh3cEntityExtErrorCode=10432019): Downstream TOD signal error.

System impact

The clock source of the device is abnormal.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Check the clock status and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtClockAlarmClear(hh3cEntityExtErrorCode=10432019)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.40	A major clock fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the error on the GPS downstream ToD signals is cleared. (hh3cEntityExtErrorCode=10432019): Downstream TOD signal error removed.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtClockAlarmOccur(hh3cEntityExtErrorCode=10432018)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.39	A major clock fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.40 (hh3cEntityExtClockAlarmClear)	ON

Notification triggers

This notification is generated when an error occurs on the GPS downstream IPPS signals. (hh3cEntityExtErrorCode=10432018): Downstream IPPS signal error.

System impact

The clock source of the device is abnormal.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Check the clock status and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtClockAlarmClear(hh3cEntityExtErrorCode=10432018)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.40	A major clock fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the error on the GPS downstream IPPS signals is cleared. (hh3cEntityExtErrorCode=10432018): Downstream IPPS signal error removed.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtClockAlarmOccur(hh3cEntityExtErrorCode=20432018)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.39	A major clock fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.40 (hh3cEntityExtClockAlarmClear)	ON

Notification triggers

This notification is generated when an error occurs on the clock chip downstream IPPS signals. (hh3cEntityExtErrorCode=20432018): Downstream IPPS signal error.

System impact

The clock source of the device is abnormal.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Check the clock status and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtClockAlarmClear(hh3cEntityExtErrorCode=20432018)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.40	A major clock fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the error on the clock chip downstream IPPS signals is cleared. (hh3cEntityExtErrorCode=20432018): Downstream IPPS signal error removed.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtClockAlarmOccur(hh3cEntityExtErrorCode=10432020)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.39	A major clock fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.40 (hh3cEntityExtClockAlarmClear)	ON

Notification triggers

This notification is generated when an error occurs on the clock chip downstream 8 KHz signals. (hh3cEntityExtErrorCode=10432020): Downstream 8 KHz clock signal error.

System impact

The clock source of the device is abnormal.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Check the clock status and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtClockAlarmClear(hh3cEntityExtErrorCode=10432020)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.40	A major clock fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the error on the clock chip downstream 8 KHz signals is cleared. (hh3cEntityExtErrorCode=10432020): Downstream 8 KHz clock signal error removed.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtClockAlarmOccur(hh3cEntityExtErrorCode=20432020)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.39	A major clock fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.40 (hh3cEntityExtClockAlarmClear)	ON

Notification triggers

This notification is generated when an error occurs on the FPGA downstream 8 KHz clock signals. (hh3cEntityExtErrorCode=20432020): Downstream 8 KHz clock signal error.

System impact

The clock source of the device is abnormal.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Check the clock status and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtClockAlarmClear(hh3cEntityExtErrorCode=20432020)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.40	A major clock fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the error on the FPGA downstream 8 KHz signals is cleared. (hh3cEntityExtErrorCode=20432020): Downstream 8 KHz clock signal error removed.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtClockAlarmOccur(hh3cEntityExtErrorCode=20432019)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.39	A major clock fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.40 (hh3cEntityExtClockAlarmClear)	ON

Notification triggers

This notification is generated when an error occurs on the MPU downstream ToD signals. (hh3cEntityExtErrorCode=20432019): Downstream TOD signal error.

System impact

The clock source of the device is abnormal.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Check the clock status and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtClockAlarmClear(hh3cEntityExtErrorCode=20432019)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.40	A major clock fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the error on the MPU downstream ToD signals is cleared.(hh3cEntityExtErrorCode=20432019): Downstream TOD signal error removed.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtClockAlarmOccur(hh3cEntityExtErrorCode=30432019)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.39	A major clock fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.40 (hh3cEntityExtClockAlarmClear)	ON

Notification triggers

This notification is generated when an error occurs on the MPU downstream 1PPS signals. (hh3cEntityExtErrorCode=30432019): Downstream IPPS signal error.

System impact

The clock source of the device is abnormal.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Check the clock status and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtClockAlarmClear(hh3cEntityExtErrorCode=30432019)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.40	A major clock fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the error on the MPU downstream 1PPS signals is cleared. (hh3cEntityExtErrorCode=30432019): Downstream IPPS signal error removed.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtClockAlarmOccur(hh3cEntityExtErrorCode=30432020)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.39	A major clock fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.40 (hh3cEntityExtClockAlarmClear)	ON

Notification triggers

This notification is generated when an error occurs on the 8 KHz clock signals transmitted from the MPU to an interface module. (hh3cEntityExtErrorCode=30432020): Downstream 8 KHz clock signal error.

System impact

The clock source of the device is abnormal.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Check the clock status and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtClockAlarmClear(hh3cEntityExtErrorCode=30432020)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.40	A major clock fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the error on the 8 KHz clock signals transmitted from the MPU to an interface module is cleared. (hh3cEntityExtErrorCode=30432020): Downstream 8 KHz clock signal error removed.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtClockAlarmOccur(hh3cEntityExtErrorCode=40432020)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.39	A major clock fault occurred..	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.40 (hh3cEntityExtClockAlarmClear)	ON

Notification triggers

This notification is generated when an error occurs on the 8 KHz clock signals transmitted from a base card to a subcard. (hh3cEntityExtErrorCode=40432020): Downstream 8 KHz clock signal error.

System impact

The clock source of the device is abnormal.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Check the clock status and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtClockAlarmClear(hh3cEntityExtErrorCode=40432020)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.40	A major clock fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the error on the 8 KHz clock signals transmitted from a base card to a subcard is cleared. (hh3cEntityExtErrorCode=40432020): Downstream 8 KHz clock signal error removed.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtClockAlarmOccur(hh3cEntityExtErrorCode=10432021)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.39	A major clock fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.40 (hh3cEntityExtClockAlarmClear)	ON

Notification triggers

This notification is generated when an error occurs on the 8 KHz clock signals transmitted from a port to the clock chip on the interface module. (hh3cEntityExtErrorCode=10432021): Downstream 8 KHz clock signal error.

System impact

The clock source of the device is abnormal.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Check the clock status and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtClockAlarmClear(hh3cEntityExtErrorCode=10432021)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.40	A major clock fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the error on the 8 KHz clock signals transmitted from a port to the clock chip on the interface module is removed. (hh3cEntityExtErrorCode=10432021): Downstream 8 KHz clock signal error removed.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtInternalLinkFatalAlarmOccur(hh3cEntityExtErrorCode=0474003)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.55	A critical internal link fault occurred.	Error	Critical	1.3.6.1.4.1.25506.2.6.4.0.56 (hh3cEntityExtInternalLinkFatalAlarmClear)	ON

Notification triggers

This notification is generated when an IPC link is detected abnormal. (hh3cEntityExtErrorCode=0474003): Failed to receive or send packets over the link $1. Source port = $2, Destination port =$3.

System impact

Service flapping might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Check the internal link status and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtInternalLinkFatalAlarmClear(hh3cEntityExtErrorCode=0474003)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.56	A critical internal link fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the IPC link anomaly is cleared.(hh3cEntityExtErrorCode=0474003): Recovered packet receiving or sending over the link $1. Source port = $2, Destination port = $3.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtInternalLinkAlarmOccur(hh3cEntityExtErrorCode=0474002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.57	A major internal link fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.58 (hh3cEntityExtInternalLinkAlarmClear)	ON

Notification triggers

This notification is generated when CRC errors on an IPC link exceed the threshold. (hh3cEntityExtErrorCode=0474002): Number of errors on the link $1 reached or exceeded the fault threshold. Source port = $2, Destination port = $3.

System impact

Service flapping might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Check the internal link status and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtInternalLinkAlarmClear(hh3cEntityExtErrorCode=0474002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.58	A major internal link fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when CRC errors on an IPC link falls below the threshold. (hh3cEntityExtErrorCode=0474002): Number of errors on the link $1 dropped below the fault threshold. Source port = $2, Destination port = $3.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtInternalLinkFatalAlarmOccur(hh3cEntityExtErrorCode=0474001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.55	A critical internal link fault occurred.	Error	Critical	1.3.6.1.4.1.25506.2.6.4.0.56 (hh3cEntityExtInternalLinkFatalAlarmClear)	ON

Notification triggers

This notification is generated when an IPC link goes down. (hh3cEntityExtErrorCode=0474001): The link $1 went down. Source port = $2, Destination port =$3.

System impact

The card might reboot and service might flap.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Check the internal link status and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtInternalLinkFatalAlarmClear(hh3cEntityExtErrorCode=0474001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.56	A critical internal link fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when an IPC link comes up from down state. (hh3cEntityExtErrorCode=0474001): The link came up. Source port = $1, Destination port = $2.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtInternalLinkFatalAlarmOccur(hh3cEntityExtErrorCode=0474011)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.55	A critical internal link fault occurred.	Error	Critical	1.3.6.1.4.1.25506.2.6.4.0.56 (hh3cEntityExtInternalLinkFatalAlarmClear)	ON

Notification triggers

This notification is generated when an IPC link flaps. (hh3cEntityExtErrorCode=0474011): IPC link flapped.

System impact

The card reboot and service might flap.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Check the internal link status and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtInternalLinkFatalAlarmClear(hh3cEntityExtErrorCode=0474011)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.56	A critical internal link fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the IPC link flapping issue is cleared. (hh3cEntityExtErrorCode=0474011): IPC link flapping issue removed.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtInternalLinkAlarmOccur(hh3cEntityExtErrorCode=0428001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.57	A major internal link fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.58 (hh3cEntityExtInternalLinkAlarmClear)	ON

Notification triggers

This notification is generated when a PHY chip link failure is detected. (hh3cEntityExtErrorCode=0428001): PHY chip link failure detected.

System impact

The card might reboot and service might flap.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Check the internal link status and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtInternalLinkAlarmClear(hh3cEntityExtErrorCode=0428001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.58	A major internal link fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when a PHY chip link recovers from a failure. (hh3cEntityExtErrorCode=0428001): PHY chip link recovered.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardWarningOccur(hh3cEntityExtErrorCode=0428002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.11	A card warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.12 (hh3cEntityExtBoardWarningClear)	ON

Notification triggers

This notification is generated when read/write access to the PHY chip fails. (hh3cEntityExtErrorCode=0428002): Communication with the PHY chip failed.

System impact

A hardware failure is detected, and a service failure might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue, contact H3C Support.

hh3cEntityExtBoardWarningClear(hh3cEntityExtErrorCode=0428002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.12	A card warning was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the system restores read/write access to the PHY chip. (hh3cEntityExtErrorCode=0428002): Communication with the PHY chip restored.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardWarningOccur(hh3cEntityExtErrorCode=0427002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.11	A card warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.12 (hh3cEntityExtBoardWarningClear)	ON

Notification triggers

This notification is generated when read/write to a MAC chip on a card fails. (hh3cEntityExtErrorCode=0427002): Failed to access the MAC chip.

System impact

A hardware failure is detected, and a service failure might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue, contact H3C Support.

hh3cEntityExtBoardWarningClear(hh3cEntityExtErrorCode=0427002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.12	A card warning was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the system restored access to a MAC chip on a card. (hh3cEntityExtErrorCode=0427002): Restored access to the MAC chip.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardFatalAlarmOccur(hh3cEntityExtErrorCode=0422002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.7	A critical card fault occurred.	Error	Critical	1.3.6.1.4.1.25506.2.6.4.0.8 (hh3cEntityExtBoardFatalAlarmClear)	ON

Notification triggers

This notification is generated when an uncorrectable ECC error occurs on an NP on a card.(hh3cEntityExtErrorCode=0422002): Uncorrectable ECC error occurred on the NP.

System impact

If the error occurs on a non-critical location, the card will operate correctly. If the error occurs on a critical location, the card might fail to operate correctly.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Check the card status and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtBoardFatalAlarmOccur(hh3cEntityExtErrorCode=0422003)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.7	A critical card fault occurred.	Error	Critical	1.3.6.1.4.1.25506.2.6.4.0.8 (hh3cEntityExtBoardFatalAlarmClear)	ON

Notification triggers

This notification is generated when a PIC interface error occurs on a card. (hh3cEntityExtErrorCode=0422003): PCI_OFFLOAD error occurred on the NP.

System impact

The card services might be abnormal, and the card might reboot immediately.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Check the card status and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtBoardFatalAlarmOccur(hh3cEntityExtErrorCode=0422004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.7	A critical card fault occurred.	Error	Critical	1.3.6.1.4.1.25506.2.6.4.0.8 (hh3cEntityExtBoardFatalAlarmClear)	ON

Notification triggers

This notification is generated when a deadlock error occurs on an NP on a card and the system reboots the NP. (hh3cEntityExtErrorCode=0422004): Deadlock error occurred on the NP. The NP rebooted automatically for self-healing.

System impact

Services might be unavailable, or temporary packet loss might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Check the card status and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtBoardFatalAlarmOccur(hh3cEntityExtErrorCode=0422004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.8	A critical card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the deadlock error on an NP chip is cleared. (hh3cEntityExtErrorCode=0422004): Deadlock error removed from chip $1.

System impact

The error might be cleared or persists.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Check the card to identify whether the error is cleared.

2.If the issue persists, contact H3C Support.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=10432016)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when read/write access to the DS31400 clock chip on an ATM subcard fails. (hh3cEntityExtErrorCode=10432016): Board PLL chip read/write failed.

System impact

The subcard cannot operate correctly.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Yes	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	No	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Resource Info	No	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	No	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Fault Reason	No	OCTECT STRING	See notification triggers.

Recommended action

Reboot the subcard.

hh3cEntityExtBoardAlarmClear(hh3cEntityExtErrorCode=10432016)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the system restores read/write access to the DS31400 clock chip on an ATM subcard. (hh3cEntityExtErrorCode=10432016): Board PLL chip read/write recovered.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Yes	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	No	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Resource Info	No	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	No	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Fault Reason	No	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=20432016)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when read/write access to the DS31400 clock chip on a POS subcard fails. (hh3cEntityExtErrorCode=20432016): Board PLL chip read/write failed.

System impact

The subcard cannot operate correctly.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Yes	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	No	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Resource Info	No	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	No	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Fault Reason	No	OCTECT STRING	See notification triggers.

Recommended action

Reboot the subcard.

hh3cEntityExtBoardAlarmClear(hh3cEntityExtErrorCode=20432016)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the system restores read/write access to the DS31400 clock chip on a POS subcard. (hh3cEntityExtErrorCode=20432016): Board PLL chip read/write recovered.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Yes	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	No	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Resource Info	No	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	No	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Fault Reason	No	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=30432016)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when read/write access to the DS31400 clock chip on a CPOS subcard fails.

System impact

The subcard cannot operate correctly.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Yes	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	No	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Resource Info	No	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	No	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Fault Reason	No	OCTECT STRING	See notification triggers.

Recommended action

Reboot the subcard.

hh3cEntityExtBoardAlarmClear(hh3cEntityExtErrorCode=30432016)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the system restores read/write access to the DS31400 clock chip on a CPOS subcard. (hh3cEntityExtErrorCode=30432016): Board PLL chip read/write recovered.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Yes	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	No	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Resource Info	No	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	No	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Fault Reason	No	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=40432016)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when read/write access to the DS31400 clock chip on an E1T1 subcard fails.(hh3cEntityExtErrorCode=40432016): Board PLL chip read/write failed.

System impact

The subcard cannot operate correctly.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Yes	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	No	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Resource Info	No	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	No	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Fault Reason	No	OCTECT STRING	See notification triggers.

Recommended action

Reboot the subcard.

hh3cEntityExtBoardAlarmClear(hh3cEntityExtErrorCode=40432016)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the system restores read/write access to the DS31400 clock chip on an E1T1 subcard. (hh3cEntityExtErrorCode=40432016): Board PLL chip read/write recovered.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Yes	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	No	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Resource Info	No	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	No	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Fault Reason	No	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=50432016)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when read/write access to the zl30165 clock chip on a POS subcard fails. (hh3cEntityExtErrorCode=50432016): Board PLL chip read/write failed.

System impact

The subcard cannot operate correctly.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Yes	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	No	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Resource Info	No	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	No	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Fault Reason	No	OCTECT STRING	See notification triggers.

Recommended action

Reboot the subcard.

hh3cEntityExtBoardAlarmClear(hh3cEntityExtErrorCode=50432016)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the system restores read/write access to the zl30165 clock chip on a POS subcard. (hh3cEntityExtErrorCode=50432016): Board PLL chip read/write recovered.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Yes	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	No	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Resource Info	No	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	No	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Fault Reason	No	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=10440003)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when a local bus error occurs on an ATM subcard. (hh3cEntityExtErrorCode=10440003): FPGA local bus error.

System impact

The subcard cannot operate correctly.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Yes	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	No	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Resource Info	No	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	No	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Fault Reason	No	OCTECT STRING	See notification triggers.

Recommended action

Reboot the subcard.

hh3cEntityExtBoardAlarmClear(hh3cEntityExtErrorCode=10440003)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the local bus error on an ATM subcard is cleared. (hh3cEntityExtErrorCode=10440003): FPGA local bus error removed.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Yes	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	No	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Resource Info	No	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	No	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Fault Reason	No	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=20440003)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when an FPGA local bus error occurs on a POS subcard. (hh3cEntityExtErrorCode=20440003): FPGA local bus error.

System impact

The subcard cannot operate correctly.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Yes	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	No	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Resource Info	No	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	No	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Fault Reason	No	OCTECT STRING	See notification triggers.

Recommended action

Reboot the subcard.

hh3cEntityExtBoardAlarmClear(hh3cEntityExtErrorCode=20440003)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the FPGA local bus error on a POS card is cleared. (hh3cEntityExtErrorCode=20440003): FPGA local bus error remove.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Yes	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	No	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Resource Info	No	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	No	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Fault Reason	No	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=30440003)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when an FPGA local bus error occurs on a CPOS subcard. (hh3cEntityExtErrorCode=30440003): FPGA local bus error.

System impact

The subcard cannot operate correctly.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Yes	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	No	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Resource Info	No	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	No	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Fault Reason	No	OCTECT STRING	See notification triggers.

Recommended action

Reboot the subcard.

hh3cEntityExtBoardAlarmClear(hh3cEntityExtErrorCode=30440003)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the FPGA local bus error on a CPOS subcard is cleared. (hh3cEntityExtErrorCode=30440003): FPGA local bus error removed.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Yes	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	No	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Resource Info	No	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	No	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Fault Reason	No	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=40440003)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when an FPGA local bus error occurs on an E1T1 subcard. (hh3cEntityExtErrorCode=40440003): FPGA local bus error.

System impact

The subcard cannot operate correctly.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Yes	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	No	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Resource Info	No	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	No	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Fault Reason	No	OCTECT STRING	See notification triggers.

Recommended action

Reboot the subcard.

hh3cEntityExtBoardAlarmClear(hh3cEntityExtErrorCode=40440003)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the FPGA local bus error on an E1T1 subcard is cleared. (hh3cEntityExtErrorCode=40440003)FPGA local bus error removed.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Yes	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	No	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Resource Info	No	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	No	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Fault Reason	No	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=10440009)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when an FPGA SEU error occurs on a WAN card. (hh3cEntityExtErrorCode=10440009): FPGA SEU error.

System impact

The subcard cannot operate correctly.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Yes	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	No	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Resource Info	No	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	No	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Fault Reason	No	OCTECT STRING	See notification triggers.

Recommended action

Reboot the subcard.

hh3cEntityExtBoardAlarmClear(hh3cEntityExtErrorCode=10440009)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the FPGA SEU error on a WAN card is cleared. (hh3cEntityExtErrorCode=10440009): FPGA SEU error removed.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Yes	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	No	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Resource Info	No	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	No	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Fault Reason	No	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=10442001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when a DF400 error occurs. (hh3cEntityExtErrorCode=10442001): Retimer access failure.

System impact

The subcard cannot operate correctly.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Yes	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	No	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Resource Info	No	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	No	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Fault Reason	No	OCTECT STRING	See notification triggers.

Recommended action

Reboot the subcard.

hh3cEntityExtBoardAlarmClear(hh3cEntityExtErrorCode=10442001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when a DF400 error is cleared. (hh3cEntityExtErrorCode=10442001): Retimer access failure.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Yes	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	No	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Resource Info	No	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	No	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Fault Reason	No	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardFatalAlarmOccur(hh3cEntityExtErrorCode=10440008)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.7	A critical card fault occurred.	Error	Critical	1.3.6.1.4.1.25506.2.6.4.0.8 (hh3cEntityExtBoardFatalAlarmClear)	ON

Notification triggers

This notification is generated when the FPGA PLL on an ATM subcard goes out of lock. (hh3cEntityExtErrorCode=10440008): FPGA PLL unlocked.

System impact

The subcard cannot operate correctly.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

Reboot the subcard.

hh3cEntityExtBoardFatalAlarmClear(hh3cEntityExtErrorCode=10440008)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.8	A critical card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the FPGA PLL on an ATM subcard restores to the locked state. (hh3cEntityExtErrorCode=10440008): FPGA PLL locked.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardFatalAlarmOccur(hh3cEntityExtErrorCode=20440008)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.7	A critical card fault occurred.	Error	Critical	1.3.6.1.4.1.25506.2.6.4.0.8 (hh3cEntityExtBoardFatalAlarmClear)	ON

Notification triggers

This notification is generated when the FPGA PLL on a POS subcard goes out of lock. (hh3cEntityExtErrorCode=20440008): FPGA PLL unlocked.

System impact

The subcard cannot operate correctly.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

Reboot the subcard.

hh3cEntityExtBoardFatalAlarmClear(hh3cEntityExtErrorCode=20440008)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.8	A critical card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the FPGA PLL on a POS subcard restores to locked state. (hh3cEntityExtErrorCode=20440008): FPGA PLL locked.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardWarningOccur(hh3cEntityExtErrorCode=10428002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.11	A card warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.12 (hh3cEntityExtBoardWarningClear)	ON

Notification triggers

This notification is generated when a PHY chip error occurs on an ATM subcard. (hh3cEntityExtErrorCode=10428002): Communication with phy chip failed.

System impact

The subcard cannot operate correctly.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

Reboot the subcard.

hh3cEntityExtBoardWarningClear(hh3cEntityExtErrorCode=10428002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.12	A card warning was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the PHY chip error on an ATM subcard is cleared. (hh3cEntityExtErrorCode=10428002): Communication with phy chip restored.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardWarningOccur(hh3cEntityExtErrorCode=10428002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.11	A card warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.12 (hh3cEntityExtBoardWarningClear)	ON

Notification triggers

This notification is generated when a PHY chip error occurs on a POS subcard. (hh3cEntityExtErrorCode=20428002): Communication with phy chip failed.

System impact

The subcard cannot operate correctly.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

Reboot the subcard.

hh3cEntityExtBoardWarningClear(hh3cEntityExtErrorCode=20428002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.12	A card warning was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the PHY chip error on a POS subcard is cleared. (hh3cEntityExtErrorCode=20428002): Communication with phy chip restored.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardWarningOccur(hh3cEntityExtErrorCode=30428002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.11	A card warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.12 (hh3cEntityExtBoardWarningClear)	ON

Notification triggers

This notification is generated when a PHY chip error on a CPOS subcard. (hh3cEntityExtErrorCode=30428002): Communication with phy chip failed.

System impact

The subcard cannot operate correctly.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue, reboot the subcard.

hh3cEntityExtBoardWarningClear(hh3cEntityExtErrorCode=30428002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.12	A card warning was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the PHY chip error on a CPOS subcard is cleared. (hh3cEntityExtErrorCode=30428002): Communication with phy chip restored.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardWarningOccur(hh3cEntityExtErrorCode=40428002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.11	A card warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.12 (hh3cEntityExtBoardWarningClear)	ON

Notification triggers

This notification is generated when a PHY chip error occurs on an E1T1 subcard. (hh3cEntityExtErrorCode=40428002): Communication with phy chip failed.

System impact

The subcard cannot operate correctly.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue, reboot the subcard.

hh3cEntityExtBoardWarningClear(hh3cEntityExtErrorCode=40428002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.12	A card warning was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the PHY chip error on an E1T1 subcard is cleared. (hh3cEntityExtErrorCode=40428002): Communication with phy chip restored.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtInternalLinkFatalAlarmOccur(hh3cEntityExtErrorCode=10479001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.55	A critical internal link fault occurred.	Error	Critical	1.3.6.1.4.1.25506.2.6.4.0.56 (hh3cEntityExtOpticalFatalAlarmClear)	ON

Notification triggers

This notification is generated when an Interlaken link goes down. (hh3cEntityExtErrorCode=10479001): Interlaken link went down.

System impact

Traffic might be interrupted, error packets might occur, or the interface might go down.

Status control

You can disable this notification simply by disabling FMEA.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Reboot the card.

2.If the issue persists, contact H3C Support.

hh3cEntityExtOpticalFatalAlarmClear(hh3cEntityExtErrorCode=10479001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.56	A critical internal link fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when an Interlaken link comes up from down state. (hh3cEntityExtErrorCode=10479001): Interlaken link came up.

System impact

No negative impact on the system.

Status control

You can disable this notification simply by disabling FMEA.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtInternalLinkFatalAlarmOccur(hh3cEntityExtErrorCode=20479001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.55	A critical internal link fault occurred.	Error	Critical	1.3.6.1.4.1.25506.2.6.4.0.56 (hh3cEntityExtOpticalFatalAlarmClear)	ON

Notification triggers

This notification is generated when an Interlaken link goes down. (hh3cEntityExtErrorCode=20479001): Interlaken link went down.

System impact

Traffic might be interrupted, error packets might occur, or the interface might go down.

Status control

You can disable this notification simply by disabling FMEA.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Reboot the card.

2.If the issue persists, contact H3C Support.

hh3cEntityExtOpticalFatalAlarmClear(hh3cEntityExtErrorCode=20479001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.56	A critical internal link fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when an Interlaken link comes up from down state. (hh3cEntityExtErrorCode=20479001): Interlaken link came up.

System impact

No negative impact on the system.

Status control

You can disable this notification simply by disabling FMEA.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtInternalLinkFatalAlarmOccur(hh3cEntityExtErrorCode=30479001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.55	A critical internal link fault occurred.	Error	Critical	1.3.6.1.4.1.25506.2.6.4.0.56 (hh3cEntityExtOpticalFatalAlarmClear)	ON

Notification triggers

This notification is generated when an Interlaken link goes down. (hh3cEntityExtErrorCode=30479001): Interlaken link went down.

System impact

Traffic might be interrupted, error packets might occur, or the interface might go down.

Status control

You can disable this notification simply by disabling FMEA.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Reboot the card.

2.If the issue persists, contact H3C Support.

hh3cEntityExtOpticalFatalAlarmClear(hh3cEntityExtErrorCode=30479001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.56	A critical internal link fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when an Interlaken link comes up from down state. (hh3cEntityExtErrorCode=30479001): Interlaken link came up.

System impact

No negative impact on the system.

Status control

You can disable this notification simply by disabling FMEA.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=10422009)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when an NP XFI interface goes down. (hh3cEntityExtErrorCode=10422009): NP XFI interface went down.

System impact

Traffic might be interrupted, error packets might occur, or the interface might go down.

Status control

You can disable this notification simply by disabling FMEA.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Reboot the subcard

2.If the issue persists, contact H3C Support.

hh3cEntityExtBoardAlarmClear(hh3cEntityExtErrorCode=10422009)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when an NP XFI interface comes up from down state. (hh3cEntityExtErrorCode=10422009): NP XFI interface came up.

System impact

No negative impact on the system.

Status control

You can disable this notification simply by disabling FMEA.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=20422009)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when an NP XFI interface goes down. (hh3cEntityExtErrorCode=20422009): NP XFI interface went down.

System impact

Traffic might be interrupted, error packets might occur, or the interface might go down.

Status control

You can disable this notification simply by disabling FMEA.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Reboot the card.

2.If the issue persists, contact H3C Support.

hh3cEntityExtBoardAlarmClear(hh3cEntityExtErrorCode=20422009)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when an NP XFI interface comes up from down state. (hh3cEntityExtErrorCode=20422009): NP XFI interface came up.

System impact

No negative impact on the system.

Status control

You can disable this notification simply by disabling FMEA.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=30422009)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred..	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when an NP XFI interface goes down.(hh3cEntityExtErrorCode=30422009): NP XFI interface went down.

System impact

Traffic might be interrupted, error packets might occur, or the interface might go down.

Status control

You can disable this notification simply by disabling FMEA.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Reboot the card.

2.If the issue persists, contact H3C Support.

hh3cEntityExtBoardAlarmClear(hh3cEntityExtErrorCode=30422009)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when an NP XFI interface comes up from down state. (hh3cEntityExtErrorCode=30422009): NP XFI interface came up.

System impact

No negative impact on the system.

Status control

You can disable this notification simply by disabling FMEA.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=70432022)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred..	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when access to the clock chip fails. (hh3cEntityExtErrorCode=70432022): Clock PLL chip unlocked.

System impact

Traffic might be interrupted, error packets might occur, or the interface might go down.

Status control

You can disable this notification simply by disabling FMEA.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Reboot the subcard.

2.If the issue persists, contact H3C Support.

hh3cEntityExtBoardAlarmClear(hh3cEntityExtErrorCode=70432022)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the system restores access to the clock chip. (hh3cEntityExtErrorCode=70432022): Clock PLL chip locked.

System impact

No negative impact on the system.

Status control

You can disable this notification simply by disabling FMEA.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=80432022)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred..	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when access to the clock chip fails. (hh3cEntityExtErrorCode=80432022): Clock PLL chip unlocked.

System impact

Traffic interruption or error packets might occur, or the interface might go down.

Status control

You can disable this notification simply by disabling FMEA.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Reboot the subcard.

2.If the issue persists, contact H3C Support.

hh3cEntityExtBoardAlarmClear(hh3cEntityExtErrorCode=80432022)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the system restores access to the clock chip. (hh3cEntityExtErrorCode=80432022): Clock PLL chip locked.

System impact

No negative impact on the system.

Status control

You can disable this notification simply by disabling FMEA.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=10440010)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when the FPGA PCIe status is detected abnormal. (hh3cEntityExtErrorCode=10440010): FPGA PCIe access failure.

System impact

Traffic interruption or error packets might occur.

Status control

You can disable this notification simply by disabling FMEA.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Reboot the subcard.

2.If the issue persists, contact H3C Support.

hh3cEntityExtBoardAlarmClear(hh3cEntityExtErrorCode=10440010)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the FPGA PCIe anomaly is cleared. (hh3cEntityExtErrorCode=10440010): FPGA PCIe access failure resolved.

System impact

No negative impact on the system.

Status control

You can disable this notification simply by disabling FMEA.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=20440010)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when the FPGA PCIe status is detected abnormal. (hh3cEntityExtErrorCode=20440010): FPGA PCIe access failure.

System impact

Traffic interruption or error packets might occur.

Status control

You can disable this notification simply by disabling FMEA.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Reboot the subcard.

2.If the issue persists, contact H3C Support.

hh3cEntityExtBoardAlarmClear(hh3cEntityExtErrorCode=20440010)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the FPGA PCIe anomaly is cleared. (hh3cEntityExtErrorCode=20440010): FPGA PCIe access failure resolved.

System impact

No negative impact on the system.

Status control

You can disable this notification simply by disabling FMEA.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=30440009)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when uncorrectable FPGA SEU errors are increasing. (hh3cEntityExtErrorCode=30440009): FPGA SEU error.

System impact

Error packets might occur.

Status control

You can disable this notification simply by disabling FMEA.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Reboot the subcard.

2.If the issue persists, contact H3C Support.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=30440009)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when uncorrectable FPGA SEU errors stop increasing. (hh3cEntityExtErrorCode=30440009): FPGA SEU error removed.

System impact

No negative impact on the system.

Status control

You can disable this notification simply by disabling FMEA.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccurr(hh3cEntityExtErrorCode=10440004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when the FPGA Interlaken interface on the system side goes down. (hh3cEntityExtErrorCode=10440004): FPGA Interlaken interface went down.

System impact

Error packets or packet loss might occur, or interfaces might be down.

Status control

You can disable this notification simply by disabling FMEA.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Reboot the subcard.

2.If the issue persists, contact H3C Support.

hh3cEntityExtBoardAlarmClearr(hh3cEntityExtErrorCode=10440004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the FPGA Interlaken interface on the system side comes up from the down state. (hh3cEntityExtErrorCode=10440004): FPGA Interlaken interface came up.

System impact

No negative impact on the system.

Status control

You can disable this notification simply by disabling FMEA.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccurr(hh3cEntityExtErrorCode=20440004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when the FPGA Interlaken interface on the system side goes down. (hh3cEntityExtErrorCode=20440004): FPGA Interlaken interface went down.

System impact

Error packets or packet loss might occur, or interfaces might be down.

Status control

You can disable this notification simply by disabling FMEA.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Reboot the subcard.

2.If the issue persists, contact H3C Support.

hh3cEntityExtBoardAlarmClearr(hh3cEntityExtErrorCode=20440004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the FPGA Interlaken interface on the system side comes up from the down state. (hh3cEntityExtErrorCode=20440004): FPGA Interlaken interface came up.

System impact

No negative impact on the system.

Status control

You can disable this notification simply by disabling FMEA.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccurr(hh3cEntityExtErrorCode=30440004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred..	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when the FPGA Interlaken interface on the system side goes down. (hh3cEntityExtErrorCode=30440004): FPGA Interlaken interface went down.

System impact

Error packets or packet loss might occur, or interfaces might be down.

Status control

You can disable this notification simply by disabling FMEA.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Reboot the subcard.

2.If the issue persists, contact H3C Support.

hh3cEntityExtBoardAlarmClearr(hh3cEntityExtErrorCode=30440004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the FPGA Interlaken interface on the system side comes up from the down state.(hh3cEntityExtErrorCode=30440004): FPGA Interlaken interface came up.

System impact

No negative impact on the system.

Status control

You can disable this notification simply by disabling FMEA.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccurr(hh3cEntityExtErrorCode=40440004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when the FPGA Interlaken interface on the system side goes down. (hh3cEntityExtErrorCode=40440004)FPGA Interlaken interface went down.

System impact

Error packets or packet loss might occur, or interfaces might be down.

Status control

You can disable this notification simply by disabling FMEA.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Reboot the subcard.

2.If the issue persists, contact H3C Support.

hh3cEntityExtBoardAlarmOccurr(hh3cEntityExtErrorCode=40440004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the FPGA Interlaken interface on the system side comes up from the down state. (hh3cEntityExtErrorCode=40440004): FPGA Interlaken interface came up.

System impact

No negative impact on the system.

Status control

You can disable this notification simply by disabling FMEA.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=40440008)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when the FPGA PLL goes out of lock. (hh3cEntityExtErrorCode=40440008): FPGA PLL unlocked.

System impact

Error packets or packet loss might occur, or interfaces might be down.

Status control

You can disable this notification simply by disabling FMEA.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Reboot the subcard.

2.If the issue persists, contact H3C Support.

hh3cEntityExtBoardAlarmClear(hh3cEntityExtErrorCode=40440008)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the FPGA PLL restores to the locked state. (hh3cEntityExtErrorCode=40440008): FPGA PLL locked.

System impact

No negative impact on the system.

Status control

You can disable this notification simply by disabling FMEA.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=50440008)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when the FPGA PLL goes out of lock. (hh3cEntityExtErrorCode=50440008): FPGA PLL unlocked.

System impact

Error packets or packet loss might occur, or interfaces might be down.

Status control

You can disable this notification simply by disabling FMEA.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Reboot the subcard.

2.If the issue persists, contact H3C Support.

hh3cEntityExtBoardAlarmClear(hh3cEntityExtErrorCode=50440008)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the FPGA PLL restores to the locked state. (hh3cEntityExtErrorCode=50440008): FPGA PLL locked.

System impact

No negative impact on the system.

Status control

You can disable this notification simply by disabling FMEA.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=60428002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when read/write to the PHY chip fails. (hh3cEntityExtErrorCode=60428002): Communication with phy chip failed.

System impact

Error packets or packet loss might occur, or interfaces might be down.

Status control

You can disable this notification simply by disabling FMEA.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Reboot the subcard.

2.If the issue persists, contact H3C Support.

hh3cEntityExtBoardAlarmClear(hh3cEntityExtErrorCode=60428002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the system restores read/write to the PHY chip. (hh3cEntityExtErrorCode=60428002): Communication with phy chip restored.

System impact

No negative impact on the system.

Status control

You can disable this notification simply by disabling FMEA.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=70428002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when read/write to the PHY chip fails. (hh3cEntityExtErrorCode=70428002): Communication with phy chip failed.

System impact

Error packets or packet loss might occur, or interfaces might be down.

Status control

You can disable this notification simply by disabling FMEA.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Reboot the subcard.

2.If the issue persists, contact H3C Support.

hh3cEntityExtBoardAlarmClear(hh3cEntityExtErrorCode=70428002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the system restores read/write to the PHY chip. (hh3cEntityExtErrorCode=70428002): Communication with phy chip restored.

System impact

No negative impact on the system.

Status control

You can disable this notification simply by disabling FMEA.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=80428002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred..	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when read/write to the PHY chip fails. (hh3cEntityExtErrorCode=80428002): Communication with phy chip failed.

System impact

Error packets or packet loss might occur, or interfaces might be down.

Status control

You can disable this notification simply by disabling FMEA.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Reboot the subcard.

2.If the issue persists, contact H3C Support.

hh3cEntityExtBoardAlarmClear(hh3cEntityExtErrorCode=80428002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the system restores read/write to the PHY chip. (hh3cEntityExtErrorCode=80428002): Communication with phy chip restored.

System impact

No negative impact on the system.

Status control

You can disable this notification simply by disabling FMEA.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=0440011)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when HiGig FIFO overflow occurs on the FPGA. (hh3cEntityExtErrorCode==0440011): FPGA HiGig FIFO overflow error.

System impact

Packet loss might occur, or traffic might be interrupted.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Reboot the service module.

2.If the issue persists, contact H3C Support.

hh3cEntityExtBoardAlarmClear(hh3cEntityExtErrorCode=0440011)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the HiGig FIFO overflow on the FPGA is cleared. (hh3cEntityExtErrorCode==0440011): FPGA HiGig FIFO overflow error removed.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=0440012)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when HiGig PTR FIFO overflow or underflow occurs on the FPGA. (hh3cEntityExtErrorCode==0440012): FPGA HiGig PTR FIFO overflow or underflow error.

System impact

Packet loss or traffic interruption might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Reboot the service module.

2.If the issue persists, contact H3C Support.

hh3cEntityExtBoardAlarmClear(hh3cEntityExtErrorCode=0440012)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the HiGig PTR FIFO overflow or underflow error on the FPGA is cleared. (hh3cEntityExtErrorCode==0440012): FPGA HiGig PTR FIFO overflow or underflow error removed.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=0444003)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when unrecoverable parity and ECC errors in important entries on the switch fabric chip in a specified period of time reaches or exceeds the threshold. (hh3cEntityExtErrorCode==0444003): Number of unrecoverable parity and ECC errors in important entries on the switch fabric chip reached or exceeded the threshold.

System impact

Packet loss or traffic interruption might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Reboot the service module.

2.If the issue persists, contact H3C Support.

hh3cEntityExtBoardAlarmClear(hh3cEntityExtErrorCode=0444003)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when unrecoverable parity and ECC errors in important entries on the switch fabric chip in a specified period of time falls below the threshold. (hh3cEntityExtErrorCode==0444003): Number of unrecoverable parity and ECC errors in important entries on the switch fabric chip dropped below the threshold.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=0444004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when MMU parity and ECC errors in important entries on the switch fabric chip reaches or exceeds the threshold. (hh3cEntityExtErrorCode==0444004): Number of MMU parity and ECC errors on the switch fabric chip reached or exceeded the threshold.

System impact

Packet loss or traffic interruption might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Reboot the switching fabric module.

2.If the issue persists, contact H3C Support.

hh3cEntityExtBoardAlarmClear(hh3cEntityExtErrorCode=0444004)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when MMU parity and ECC errors in important entries on the switch fabric chip falls below the threshold. (hh3cEntityExtErrorCode==0444004): Number of MMU parity and ECC errors on the switch fabric chip dropped below the threshold.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=0440009)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when an FPGA SEU error occurs on the base card. (hh3cEntityExtErrorCode==0440009): FPGA SEU error.

System impact

Packet loss or traffic interruption might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Reboot the service module.

2.If the issue persists, contact H3C Support.

hh3cEntityExtBoardFatalAlarmOccu(hh3cEntityExtErrorCode=0423029)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.7	A critical card fault occurred.	Error	Critical	1.3.6.1.4.1.25506.2.6.4.0.8 (hh3cEntityExtBoardFatalAlarmClear)	ON

Notification triggers

This notification is generated when all interfaces on the switch fabric go down. (hh3cEntityExtErrorCode==0423029): All interfaces on the switch fabric went down.

System impact

The service module or switching fabric module cannot operate correctly.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Reboot the service module or switching fabric module.

2.If the issue persists, contact H3C Support.

hh3cEntityExtBoardFatalAlarmClea(hh3cEntityExtErrorCode=0423029)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.8	A critical card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when all interfaces on the switch fabric come up from down state. (hh3cEntityExtErrorCode==0423029): All interfaces on the switch fabric came up.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardFatalAlarmOccur(hh3cEntityExtErrorCode=0440008)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.7	A critical card fault occurred.	Error	Critical	1.3.6.1.4.1.25506.2.6.4.0.8 (hh3cEntityExtBoardFatalAlarmClear)	ON

Notification triggers

This notification is generated when the FPGA PLL goes out of lock. (hh3cEntityExtErrorCode==0440008): FPGA PLL unlocked.

System impact

The service module cannot operate correctly.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Reboot the service module.

2.If the issue persists, contact H3C Support.

hh3cEntityExtBoardFatalAlarmClear(hh3cEntityExtErrorCode=0440008)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.8	A critical card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the FPGA PLL restores to the locked sate. (hh3cEntityExtErrorCode==0440008): FPGA PLL locked.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardFatalAlarmOccur(hh3cEntityExtErrorCode=0440007)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.7	A critical card fault occurred.	Error	Critical	1.3.6.1.4.1.25506.2.6.4.0.8 (hh3cEntityExtBoardFatalAlarmClear)	ON

Notification triggers

This notification is generated when an FPGA dead lock occurs. (hh3cEntityExtErrorCode==0440007): FPGA dead lock error.

System impact

The service module cannot operate correctly.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Reboot the service module.

2.If the issue persists, contact H3C Support.

hh3cEntityExtBoardFatalAlarmClear(hh3cEntityExtErrorCode=0440007)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.8	A critical card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the FPGA dead lock error is cleared. (hh3cEntityExtErrorCode==0440007): FPGA dead lock error removed.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardWarningOccur(hh3cEntityExtErrorCode=0444001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.11	A card warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.12 (hh3cEntityExtBoardWarningClear)	ON

Notification triggers

This notification is generated when parity and ECC errors on the switch fabric chip in a specified period of time reach or exceed the threshold. (hh3cEntityExtErrorCode==0444001): Number of parity and ECC errors on the switch fabric chip reached or exceeded the threshold.

System impact

Packet loss or traffic interruption might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Check the service status. If the services are normal, no action is required. If the services are abnormal, reboot the service module or switching fabric module.

2.If the issue persists, contact H3C Support.

hh3cEntityExtBoardWarningClear(hh3cEntityExtErrorCode=0444001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.12	A card warning was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when parity and ECC errors on the switch fabric chip in a specified period of time fall below the threshold. (hh3cEntityExtErrorCode==0444001): Number of parity and ECC errors on the switch fabric chip dropped below the threshold.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardWarningOccur(hh3cEntityExtErrorCode=0423033)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.11	A card warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.12 (hh3cEntityExtBoardWarningClear)	ON

Notification triggers

This notification is generated when parity and ECC errors on the switch chip reach or exceed the threshold in a specified period of time. (hh3cEntityExtErrorCode==0423033): Number of parity and ECC errors on the switch chip reached or exceeded the threshold.

System impact

Packet loss or traffic interruption might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Check the service status. If the services are normal, no action is required. If the services are abnormal, reboot the service module.

2.If the issue persists, contact H3C Support.

hh3cEntityExtBoardWarningClear(hh3cEntityExtErrorCode=0423033)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.12	A card warning was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when parity and ECC errors on the switch chip fall below the threshold in a specified period of time. (hh3cEntityExtErrorCode==0423033): Number of parity and ECC errors on the switch chip dropped below the threshold.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardWarningOccur(hh3cEntityExtErrorCode=0444002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.11	A card warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.12 (hh3cEntityExtBoardWarningClear)	ON

Notification triggers

This notification is generated when hardware and software entry inconsistency errors on the switch fabric chip in a specified period of time reach or exceed the threshold. (hh3cEntityExtErrorCode==0444002): Number of hardware and software entry inconsistency errors on the switch fabric chip reached or exceeded the threshold.

System impact

Packet loss or traffic interruption might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Check the service status. If the services are normal, no action is required. If the services are abnormal, reboot the service module or switching fabric module.

2.If the issue persists, contact H3C Support.

hh3cEntityExtBoardWarningClear(hh3cEntityExtErrorCode=0444002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.12	A card warning was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when hardware and software entry inconsistency errors on the switch fabric chip fall below the threshold in a specified period of time. (hh3cEntityExtErrorCode==0444002): Number of hardware and software entry inconsistency errors on the switch fabric chip dropped below the threshold.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardWarningOccur(hh3cEntityExtErrorCode=0422016)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.11	A card warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.12 (hh3cEntityExtBoardWarningClear)	ON

Notification triggers

This notification is generated when parity and ECC errors on an NP chip in a specified period of time reach or exceed the threshold. (hh3cEntityExtErrorCode==0422016): Number of parity and ECC errors on the NP reached or exceeded the threshold.

System impact

Packet loss or traffic interruption might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Check service status. If the services are normal, no action is required. If the services are abnormal, reboot the service module.

2.If the issue persists, contact H3C Support.

hh3cEntityExtBoardWarningClear(hh3cEntityExtErrorCode=0422016)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.12	A card warning was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when parity and ECC errors on an NP chip in a specified period of time falls below the threshold. (hh3cEntityExtErrorCode==0422016): Number of parity and ECC errors on the NP dropped below the threshold.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardWarningOccur(hh3cEntityExtErrorCode=0428002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.11	A card warning occurred.	Error	Warning	1.3.6.1.4.1.25506.2.6.4.0.12 (hh3cEntityExtBoardWarningClear)	ON

Notification triggers

This notification is generated when read/write to the PHY chip fails. (hh3cEntityExtErrorCode==0428002): Communication with the PHY chip failed.

System impact

Packet loss might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Reboot the switching fabric module.

2.If the issue persists, contact H3C Support.

hh3cEntityExtInternalLinkAlarmOccur(hh3cEntityExtErrorCode=0481001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.57	A major internal link fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.58 (hh3cEntityExtInternalLinkAlarmClear)	ON

Notification triggers

This notification is generated when a HiGig link goes down. (hh3cEntityExtErrorCode==0481001): HiGig link went down.

System impact

Packet loss might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Check the internal link status and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtInternalLinkAlarmClear(hh3cEntityExtErrorCode=0481001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.58	A major internal link fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when a HiGig link comes up from down state.(hh3cEntityExtErrorCode==0481001): HiGig link came up.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtInternalLinkAlarmOccur(hh3cEntityExtErrorCode=0481002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.57	A major internal link fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.58 (hh3cEntityExtInternalLinkAlarmClear)	ON

Notification triggers

This notification is generated when a HiGig link flaps. (hh3cEntityExtErrorCode==0481002): HiGig link flapped.

System impact

Packet loss might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Check the internal link status and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtInternalLinkAlarmClear(hh3cEntityExtErrorCode=0481002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.58	A major internal link fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the HiGig link flapping issue is cleared. (hh3cEntityExtErrorCode==0481002): HiGig link flapping issue removed.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtInternalLinkAlarmOccur(hh3cEntityExtErrorCode=0479003)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.57	A major internal link fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.58 (hh3cEntityExtInternalLinkAlarmClear)	ON

Notification triggers

This notification is generated when CRC errors on an Interlaken link reach or exceed the threshold. (hh3cEntityExtErrorCode==0479003): Number of CRC errors on the Interlaken link reached or exceeded the threshold.

System impact

Packet loss might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Check the internal link status and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtInternalLinkAlarmClear(hh3cEntityExtErrorCode=0479003)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.58	A major internal link fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when CRC errors on an Interlaken link fall below the threshold. (hh3cEntityExtErrorCode==0479003): Number of CRC errors on the Interlaken link dropped below the threshold.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtInternalLinkAlarmOccur(hh3cEntityExtErrorCode=0481003)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.57	A major internal link fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.58 (hh3cEntityExtInternalLinkAlarmClear)	ON

Notification triggers

This notification is generated when CRC errors on a HiGig link reach or exceed the threshold. (hh3cEntityExtErrorCode==0481003): Number of CRC errors on the HiGig link reached or exceeded the threshold.

System impact

Packet loss might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Check the internal link status and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtInternalLinkAlarmClear(hh3cEntityExtErrorCode=0481003)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.58	A major internal link fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when CRC errors on a HiGig link fall below the threshold. (hh3cEntityExtErrorCode==0481003): Number of CRC errors on the HiGig link dropped below the threshold.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtInternalLinkAlarmOccur(hh3cEntityExtErrorCode=0473002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.57	A major internal link fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.58 (hh3cEntityExtInternalLinkAlarmClear)	ON

Notification triggers

This notification is generated when an error occurs on the data channel between switch chips. (hh3cEntityExtErrorCode==0473002): An error occurred on the data channel between switch chips.

System impact

Packet loss might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Check the internal link status and take actions to resolve any issues identified.

2.If the issue persists, contact H3C Support.

hh3cEntityExtInternalLinkAlarmClear(hh3cEntityExtErrorCode=0473002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.58	A major internal link fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the error on the data channel between switch chips is cleared. (hh3cEntityExtErrorCode==0473002): Error removed from the data channel between switch chips.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtInternalLinkFatalAlarmOccur(hh3cEntityExtErrorCode=0479001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.55	A critical internal link fault occurred.	Error	Critical	1.3.6.1.4.1.25506.2.6.4.0.56 (hh3cEntityExtInternalLinkFatalAlarmClear)	ON

Notification triggers

This notification is generated when an Interlaken link goes down. (hh3cEntityExtErrorCode==0479001): Interlaken link went down.

System impact

The service module cannot operate correctly.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Check the internal link status and take actions to resolve any issues identified.

2.Reboot the service module.

3.If the issue persists, contact H3C Support.

hh3cEntityExtInternalLinkFatalAlarmClear(hh3cEntityExtErrorCode=0479001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.56	A critical internal link fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when an Interlaken link comes up from down state. (hh3cEntityExtErrorCode==0479001): Interlaken link came up.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtInternalLinkFatalAlarmOccur(hh3cEntityExtErrorCode=0479002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.55	A critical internal link fault occurred.	Error	Critical	1.3.6.1.4.1.25506.2.6.4.0.56 (hh3cEntityExtInternalLinkFatalAlarmClear)	ON

Notification triggers

This notification is generated when an Interlaken link flaps. (hh3cEntityExtErrorCode==0479002): Interlaken link flapped.

System impact

Packet loss or traffic interruption might occur.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Check the internal link status and take actions to resolve any issues identified.

2.Reboot the service module.

3.If the issue persists, contact H3C Support.

hh3cEntityExtInternalLinkFatalAlarmClear(hh3cEntityExtErrorCode=0479002)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.56	A critical internal link fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the Interlaken link flapping issue is cleared. (hh3cEntityExtErrorCode==0479002): Interlaken link flapping issue removed.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

hh3cEntityExtBoardAlarmOccur(hh3cEntityExtErrorCode=0425001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.9	A major card fault occurred.	Error	Major	1.3.6.1.4.1.25506.2.6.4.0.10 (hh3cEntityExtBoardAlarmClear)	ON

Notification triggers

This notification is generated when a TCAM error occurs on a chip. (hh3cEntityExtErrorCode=0425001): TCAM error on chip $1. Detailed information:SoftErr.

System impact

Routing and ACL services might be affected.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

To resolve the issue:

1.Reboot the service module.

2.If the issue persists, contact H3C Support.

hh3cEntityExtBoardAlarmClear(hh3cEntityExtErrorCode=0425001)

Basic information

OID	Event	Type	Severity	Recovery notification	Default status
1.3.6.1.4.1.25506.2.6.4.0.10	A major card fault was cleared.	Recovery	_	N/A (N/A)	ON

Notification triggers

This notification is generated when the TCAM error on a chip is cleared. (hh3cEntityExtErrorCode=0425001): TCAM error removed on chip $1. Detailed information: None.

System impact

No negative impact on the system.

Status control

This notification cannot be disabled.

Object

OID (object name)	Description	Index	Type	Value range
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex)	Entity index.	Y	Integer32	Standard MIB values.
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName)	Entity name.	N	SnmpAdminString	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 1 (hh3cEntityExtRelativeResource)	Entity location information.	N	OCTECT STRING	OCTET STRING (SIZE (0..255))
1.3.6.1.4.1.25506.2.6.4.1. 2 (hh3cEntityExtErrorCode)	Error code.	N	Integer32	See notification triggers.
1.3.6.1.4.1.25506.2.6.4.1. 3 (hh3cEntityExtReason)	Failure cause description.	N	OCTECT STRING	See notification triggers.

Recommended action

No action is required.

03-Device Management

About this table

Support for operations

Columns

About this table

Support for operations

Columns

About this table

Support for operations

Columns

About this table

Support for operations

Columns

Basic information

Notification triggers

System impact

Status control

Object

Recommended action

Basic information

Notification triggers

System impact

Status control

Object

Recommended action

Basic information

Notification triggers

System impact

Status control

Object

Recommended action

Basic information

Notification triggers

System impact

Status control

Object

Recommended action

Basic information

Notification triggers

System impact

Status control

Object

Recommended action

Basic information

Notification triggers

System impact

Status control

Object

Recommended action

Basic information

Notification triggers

System impact

Status control

Object

Recommended action

Basic information

Notification triggers

System impact

Status control

Object

Recommended action

Basic information

Notification triggers

System impact

Status control

Object

Recommended action

Basic information

Notification triggers

System impact

Status control

Object

Recommended action

Basic information

Notification triggers

System impact

Status control

Object

Recommended action

Basic information