Login
- Table of Contents
-
- 12-WLAN Advanced Features Configuration Guide
- 00-Preface
- 01-WLAN optimization configuration
- 02-Hotspot 2.0 configuration
- 03-WLAN probe configuration
- 04-WSA configuration
- 05-Wireless location configuration
- 06-WLAN process maintenance configuration
- 07-WLAN mesh configuration
- 08-Bonjour gateway configuration
- 09-WLAN fast forwarding configuration
- 10-WDRC configuration
- Related Documents
-
| Title | Size | Download |
|---|---|---|
| 10-WDRC configuration | 53.96 KB |
Configuring WDRC
About WDRC
The WLAN Data Report Control (WDRC) module centrally manages wireless data reporting and can forward data to integrated platforms for further analysis and processing.
Restrictions: Hardware compatibility with WDRC
|
Hardware series |
Model |
Product code |
Feature compatibility |
|
WX3500X series |
· WX3510X · WX3520X · WX3540X |
· EWP-WX3510X · EWP-WX3520X · EWP-WX3540X |
Yes |
|
WX3500X-E series |
WX3508X-E |
EWP-WX3508X-E |
Yes |
|
Access controller modules |
LSEM1WBC120G0 |
LSEM1WBC120G0 |
Yes |
|
Hardware series |
Model |
Product code |
Feature compatibility |
|
WX3500X-G series |
WX3520X-G |
EWP-WX3520X-G |
No |
|
Hardware series |
Model |
Product code |
Feature compatibility |
|
WX3800X series |
· WX3820X · WX3840X |
· EWP-WX3820X · EWP-WX3840X |
Yes |
Configuring APs to report O&M data to the server
About this task
Typically, APs report collected statistics to the AC, and the AC reports the statistics to the server at specific intervals. The reported statistics cannot display the running status of the network in real time. To resolve this issue, perform this task to enable APs to directly report O&M data to the specified server at a set interval.
Restrictions and guidelines
Set the report interval based on the actual network conditions. Setting a short interval causes significant pressure on the server, and setting a long interval cannot display the network conditions in real time.
Procedure
1. Enter system view.
system-view
2. Specify the IP address of the server to which APs report O&M data.
wdrc report server { ip ipv4-address | ipv6 ipv6-address } [ port port-number ]
By default, the IP address of server to which APs report O&M data is not specified.
3. Set the interval at which APs report O&M data to the server.
wdrc report interval interval
By default, APs report O&M data to the server at intervals of 60 seconds.