Appendix A Feature list

Hardware features

Table 6 Firewall specifications

Software features

Table 7 Firewall software features

Appendix B Upgrading software

The software upgrade procedure is the same for all security devices. This chapter describes how to upgrade software from the CLI, Web interface, and BootWare menus. The default storage medium varies by device model. This chapter uses the CF card as the default storage medium.

Software images

Software images types

The following software types are available:

·            BootWare image—A .btw file that contains a basic segment and an extended segment. The basic segment is the minimum code that bootstraps the system. The extended segment enables hardware initialization and provides system management menus. You can use these menus to load software and the startup configuration file or manage files when the device cannot start up correctly.

·            System software image—Includes the following image subcategories:

¡  Boot image—A .bin file that contains the Linux operating system kernel. It provides process management, memory management, file system management, and the emergency shell.

¡  System image—A .bin file that contains the Comware kernel and standard features, including device management, interface management, configuration management, and routing.

¡  Patch image—A .bin file that is released for fixing bugs without rebooting the device. A patch image does not add or remove features.

You can assign the following attributes to a system software image:

¡  Main—The image is the primary image. The system always attempts to load the main image at startup in preference to the backup image.

¡  Backup—The image is the backup image. It is used only if the primary image is corrupt or not available.

Software release forms

Software images are released in one of the following forms:

·            Separate .bin files. You must verify compatibility between software images.

·            As a whole in one .ipe package file. The images in an .ipe package file are compatible. The system decompresses the file automatically, loads the .bin images and sets them as startup software images.

Configuration files

You can save settings you made to a configuration file so they can survive a reboot.

The device supports .cfg configuration files. The default .cfg configuration file is named startup.cfg.

Upgrade methods

To upgrade system software, use one of the following methods:

·            Upgrading system software from the CLI

·            Upgrading system software from the Web interface

·            Upgrading system software from BootWare menus

To upgrade the BootWare, use either of the following methods:

·            Upgrading the BootWare from the CLI

·            Upgrading BootWare from BootWare menus

You must reboot the device after a system software or BootWare upgrade. A device reboot interrupts services.

Before a software upgrade, read the release notes to identify the command changes. Some commands in the configuration file might not be supported after a software upgrade.

Preparing for the upgrade

The device can function as the TFTP client, FTP client, or FTP server. In the following examples that use TFTP or FTP, the device functions as the TFTP or FTP client.

To use a PC as the TFTP or FTP server, prepare the TFTP or FTP server software by yourself. The device is not shipped with the software.

Before you upgrade system software, complete the following tasks:

Set up the upgrade environment as shown in Figure 1. The IP address and subnet mask of the PC are 192.168.0.2 and 255.255.255.0, respectively.

·            Run a TFTP or FTP server on the file server. (Skip this task if you upgrade software from the Web interface.)

·            Assign an IP address to the file server. Make sure the management Ethernet port on the device and the file server can reach each other.

By default, the IP address of the management Ethernet port GigabitEthernet 1/0/0 is 192.168.0.1/24 and the management Ethernet port belongs to the Management security zone. The Management security zone and the Local security zone can communicate with each other.

You can also change the IP address of the management Ethernet port from its default and add it to a security zone other than Management. Then, you configure a zone pair to make sure the security zone and the Local security zone can communicate with each other. For more information about security zones and zone pairs, see the security zone configuration in the fundamentals configuration guide.

·            Transfer the software upgrade file to the file server and set the working directory on the TFTP or FTP server.

·            Log in to the CLI of the device through the console port. (Skip this task if you upgrade software from the Web interface.)

·            Make sure the upgrade has minimal impact on the network services. During the upgrade, the device cannot provide any services.

Figure 1 Setting up the upgrade environment

Upgrading system software

This configuration example upgrades system software from R8513 to R8514. The system software image file name is main.ipe.

Upgrading system software from the CLI

You can use TFTP or FTP on the device to access the TFTP or FTP server to back up or download software files.

Using TFTP to upgrade system software

1.      Back up the running system software image and configuration file:

a.    Display current software images and startup software images.

<Sysname> display boot-loader

Software images on slot 1:

Current software images:

  cfa0:/main-cmw710-boot-R8513.bin

  cfa0:/main-cmw710-system-R8513.bin

Main startup software images:

  cfa0:/main-cmw710-boot-R8513.bin

  cfa0:/main-cmw710-system-R8513.bin

Backup startup software images:

  None

b.    Back up the current software images.

<Sysname> copy main-cmw710-boot-R8513.bin boot_backup.bin

<Sysname> copy main-cmw710-system-R8513.bin system_backup.bin

c.    Specify boot_backup.bin and system_backup.bin as the backup startup image files.

<Sysname> boot-loader file boot cfa0:/boot_backup.bin system cfa0:/system_backup.bin backup

d.    Execute the save command in any view to save the running configuration.

<Sysname> save

The current configuration will be written to the device. Are you sure? [Y/N]:y

Please input the file name(*.cfg)[cfa0:/startup.cfg]

(To leave the existing filename unchanged, press the enter key):

cfa0:/startup.cfg exists, overwrite? [Y/N]:y

Validating file. Please wait...

Saved the current configuration to mainboard device successfully.

e.    Execute the dir command in user view to identify the system software image and configuration file names and verify that the CF card has sufficient space for the new system software image.

<Sysname> dir

Directory of cfa0:

   0 -rw-        4269 Jul 12 2018 13:34:36   + attachmentname + .ak

   1 -rw-     5723136 Oct 24 2018 13:03:16   boot_backup.bin

   2 drw-           - Sep 26 2018 15:21:36   diagfile

   3 drw-           - Sep 14 2018 08:04:50   dpi

   4 -rw-     5723136 Oct 23 2018 16:52:51   main-cmw710-boot-R8513.bin

   5 -rw-   137090048 Oct 23 2018 16:58:19   main-cmw710-system-R8513.bin

   6 -rw-         735 Sep 13 2018 19:16:22   hostkey

   7 -rw-         730 Oct 23 2018 16:58:50   ifindex.dat

   8 drw-           - Jul 12 2018 13:34:36   license

   9 drw-           - Sep 13 2018 18:29:20   logfile

  10 drw-           - Sep 13 2018 19:16:24   pki

  11 drw-           - Sep 13 2018 18:33:24   seclog

  12 -rw-         591 Sep 13 2018 19:16:24   serverkey

  13 -rw-        5109 Oct 23 2018 16:58:50   startup.cfg

  14 -rw-      134782 Oct 23 2018 16:58:51   startup.mdb

  15 -rw-   137090048 Oct 24 2018 13:11:57   system_backup.bin

  16 drw-           - Oct 23 2018 17:04:21   versionInfo

4088468 KB total (3972960 KB free)

f.     Execute the tftp put command in user view to upload the startup.cfg file to the TFTP server.

<Sysname> tftp 192.168.0.2 put startup.cfg

Press CTRL+C to abort.

  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current

                                 Dload  Upload   Total   Spent    Left  Speed

100  3950    0     0  100  3950      0   204k --:--:-- --:--:-- --:--:--  642k

2.      Upgrade the system software:

a.    Execute the tftp get command in user view to download the system software image file to the CF card on the device.

<Sysname> tftp 192.168.0.2 get main.ipe

Press CTRL+C to abort.

  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current

                                 Dload  Upload   Total   Spent    Left  Speed

100  102M  100  102M    0     0   461k      0  0:03:48  0:03:48 --:--:--  554k

Writing file...Done.

<Sysname>

b.    Execute the boot-loader file command in user view to load the main.ipe file and specify it as the main image file at the next reboot.

<Sysname> boot-loader file cfa0:/main.ipe all main

Verifying the file cfa0:/main.ipe on slot 1.........Done.

H3C SecPath T5020 images in IPE:

  main-cmw710-boot-R8514.bin

  main-cmw710-system-R8514.bin

This command will set the main startup software images. Please do not reboot any MPU during the upgrade. Continue? [Y/N]:y

Add images to slot 1.

File cfa0:/main-cmw710-boot-R8514.bin already exists on slot 1.

File cfa0:/main-cmw710-system-R8514.bin already exists on slot 1.

Overwrite the existing files? [Y/N]:y

Decompressing file main-cmw710-boot-R8514.bin to cfa0:/main-cmw710-boot-R8514.bin..........Done.

Decompressing file main-cmw710-system-R8514.bin to cfa0:/main-cmw710-system-R8514.bin............................................................................................................................................................................Done.

Verifying the file cfa0:/main-cmw710-boot-R8514.bin on slot 1...Done.

Verifying the file cfa0:/main-cmw710-system-R8514.bin on slot 1.........Done.

The images that have passed all examinations will be used as the main startup software images at the next reboot on slot 1.

Decompression completed.

Do you want to delete cfa0:/main.ipe now? [Y/N]:N

<Sysname>

c.    Execute the display boot-loader command in user view to verify that the file has been loaded.

<Sysname> display boot-loader

Software images on slot 1:

Current software images:

  cfa0:/main-cmw710-boot-R8513.bin

  cfa0:/main-cmw710-system-R8513.bin

Main startup software images:

  cfa0:/main-cmw710-boot-R8514.bin

  cfa0:/main-cmw710-system-R8514.bin

Backup startup software images:

  cfa0:/boot_backup.bin

  cfa0:/system_backup.bin

<Sysname>

d.    Execute the reboot command in user view to reboot the device.

<Sysname> reboot

 Start to check configuration with next startup configuration file, please wait.

........DONE!

 This command will reboot the device. Continue? [Y/N]:y

System is starting...

e.    After the reboot is complete, execute the display version command to verify that the system software image is correct.

<Sysname> display version

H3C Comware Software, Version 7.1.064, Release 8514

Copyright (c) 2004-2018 New H3C Technologies Co., Ltd. All rights reserved.

H3C SecPath T5020 uptime is 0 weeks, 2 days, 5 hours, 53 minutes

Last reboot reason: User reboot

Boot image: cfa0:/main-cmw710-boot-R8514.bin

Boot image version: 7.1.064, Release 8514

  Compiled Sep 18 2018 15:00:00

System image: cfa0:/main-cmw710-system-R8514.bin

System image version: 7.1.064, Release 8514

  Compiled Sep 18 2018 15:00:00

SLOT 1

Uptime is 0 weeks, 2 days, 5 hours, 53 minutes

CPU type: Multi-core CPU

DDR3 SDRAM Memory      32766M bytes

CF0 Card         4002M bytes

Board PCB        Version:Ver.A

CPLD_A           Version:  1.0

CPLD_B           Version:  2.0

Release          Version:SecPath T5020-8514    

Basic  BootWare  Version: 2.04

Extend BootWare  Version: 2.04

<Sysname>

Using FTP to upgrade system software

3.      Back up the running system software image and configuration file:

a.    Display current software images and startup software images.

<Sysname> display boot-loader

Software images on slot 1:

Current software images:

  cfa0:/main-cmw710-boot-R8513.bin

  cfa0:/main-cmw710-system-R8513.bin

Main startup software images:

  cfa0:/main-cmw710-boot-R8513.bin

  cfa0:/main-cmw710-system-R8513.bin

Backup startup software images:

  None

<Sysname>

b.    Back up the current software images.

<Sysname> copy main-cmw710-boot-R8513.bin boot_backup.bin

<Sysname> copy main-cmw710-system-R8513.bin system_backup.bin

c.    Specify boot_backup.bin and system_backup.bin as the backup startup image files.

<Sysname> boot-loader file boot cfa0:/boot_backup.bin system cfa0:/system_backup.bin backup

d.    Execute the save command in any view to save the running configuration.

<Sysname> save

The current configuration will be written to the device. Are you sure? [Y/N]:y

Please input the file name(*.cfg)[cfa0:/startup.cfg]

(To leave the existing filename unchanged, press the enter key):

cfa0:/startup.cfg exists, overwrite? [Y/N]:y

Validating file. Please wait...

Saved the current configuration to mainboard device successfully.

<Sysname>

e.    Execute the dir command in user view to identify the system software image and configuration file names and verify that the CF card has sufficient space for the new system software image.

<Sysname> dir

Directory of cfa0:

   0 -rw-        4269 Jul 12 2018 13:34:36   + attachmentname + .ak

   1 -rw-     5723136 Oct 24 2018 13:03:16   boot_backup.bin

   2 drw-           - Sep 26 2018 15:21:36   diagfile

   3 drw-           - Sep 14 2018 08:04:50   dpi

   4 -rw-     5723136 Oct 23 2018 16:52:51   main-cmw710-boot-R8513.bin

   5 -rw-   137090048 Oct 23 2018 16:58:19   main-cmw710-system-R8513.bin

   6 -rw-         735 Sep 13 2018 19:16:22   hostkey

   7 -rw-         730 Oct 23 2018 16:58:50   ifindex.dat

   8 drw-           - Jul 12 2018 13:34:36   license

   9 drw-           - Sep 13 2018 18:29:20   logfile

  10 drw-           - Sep 13 2018 19:16:24   pki

  11 drw-           - Sep 13 2018 18:33:24   seclog

  12 -rw-         591 Sep 13 2018 19:16:24   serverkey

  13 -rw-        5109 Oct 23 2018 16:58:50   startup.cfg

  14 -rw-      134782 Oct 23 2018 16:58:51   startup.mdb

  15 -rw-   137090048 Oct 24 2018 13:11:57   system_backup.bin

  16 drw-           - Oct 23 2018 17:04:21   versionInfo

4088468 KB total (3972960 KB free)

<Sysname>

f.     Execute the ftp command in user view to access the FTP server.

<Sysname> ftp 192.168.0.2

Press CTRL+C to abort.

Connected to 192.168.0.2 (192.168.0.2).

220 3Com 3CDaemon FTP Server Version 2.0

User (192.168.0.2:(none)): user123

331 User name ok, need password

Password:

230 User logged in

Remote system type is UNIX.

Using binary mode to transfer files.

ftp>

g.    Execute the put command in FTP client view to upload the startup.cfg file to the FTP server.

ftp> put startup.cfg

227 Entering passive mode (192,168,0,2,26,3).

125 Using existing data connection.

226 Closing data connection; File transfer successful.

3950 bytes sent in 0.001 seconds (4.13 Mbytes/s)

ftp>

4.      Upgrade the system software:

a.    Execute the get command in FTP client view to download the system software image file to the CF card on the device.

ftp> get main.ipe

227 Entering passive mode (192,168,0,2,8,252)

125 Using existing data connection

226 Closing data connection; File transfer successful.

107934720 bytes received in 187.994 seconds (560.68 Kbytes/s)

ftp>

b.    Execute the quit command in FTP client view to return to user view.

ftp> quit

221 Service closing control connection

<Sysname>

c.    Execute the boot-loader file command in user view to load the main.ipe file and specify it as the main image file at the next reboot.

<Sysname> boot-loader file cfa0:/main.ipe all main

Verifying the file cfa0:/main.ipe on slot 1.........Done.

H3C SecPath T5020 images in IPE:

  main-cmw710-boot-R8514.bin

  main-cmw710-system-R8514.bin

This command will set the main startup software images. Please do not reboot any MPU during the upgrade. Continue? [Y/N]:y

Add images to slot 1.

File cfa0:/main-cmw710-boot-R8514.bin already exists on slot 1.

File cfa0:/main-cmw710-system-R8514.bin already exists on slot 1.

Overwrite the existing files? [Y/N]:y

Decompressing file main-cmw710-boot-R8514.bin to cfa0:/main-cmw710-boot-R8514.bin..........Done.

Decompressing file main-cmw710-system-R8514.bin to cfa0:/main-cmw710-system-R8514.bin............................................................................................................................................................................Done.

Verifying the file cfa0:/main-cmw710-boot-R8514.bin on slot 1...Done.

Verifying the file cfa0:/main-cmw710-system-R8514.bin on slot 1.........Done.

The images that have passed all examinations will be used as the main startup software images at the next reboot on slot 1.

Decompression completed.

Do you want to delete cfa0:/main.ipe now? [Y/N]:N

<Sysname>

d.    Execute the display boot-loader command in user view to verify that the file has been loaded.

<Sysname> display boot-loader

Software images on slot 2:

Current software images:

  cfa0:/main-cmw710-boot-R8513.bin

  cfa0:/main-cmw710-system-R8513.bin

Main startup software images:

  cfa0:/main-cmw710-boot-R8514.bin

  cfa0:/main-cmw710-system-R8514.bin

Backup startup software images:

  cfa0:/boot_backup.bin

  cfa0:/system_backup.bin

<Sysname>

e.    Execute the reboot command in user view to reboot the device.

<Sysname> reboot

 Start to check configuration with next startup configuration file, please wait.

........DONE!

 This command will reboot the device. Continue? [Y/N]:y

System is starting...

f.     After the reboot is complete, execute the display version command to verify that the system software image is correct.

<Sysname> display version

H3C Comware Software, Version 7.1.064, Release 8514

Copyright (c) 2004-2018 New H3C Technologies Co., Ltd. All rights reserved.

H3C SecPath T5020 uptime is 0 weeks, 2 days, 5 hours, 53 minutes

Last reboot reason: User reboot

Boot image: cfa0:/main-cmw710-boot-R8514.bin

Boot image version: 7.1.064, Release 8514

  Compiled Sep 18 2018 15:00:00

System image: cfa0:/main-cmw710-system-R8514.bin

System image version: 7.1.064, Release 8514

  Compiled Sep 18 2018 15:00:00

SLOT 1

Uptime is 0 weeks, 2 days, 5 hours, 53 minutes

CPU type: Multi-core CPU

DDR3 SDRAM Memory      32766M bytes

CF0 Card         4002M bytes

Board PCB        Version:Ver.A

CPLD_A           Version:  1.0

CPLD_B           Version:  2.0

Release          Version:SecPath T5020-8514    

Basic  BootWare  Version: 2.04

Extend BootWare  Version: 2.04

<Sysname>

Upgrading system software from the Web interface

Table 8 describes the default settings for you to log in to the Web interface.

Table 8 Default login information

To upgrade the system software from the Web interface:

5.      Use an Ethernet cable to connect the PC to an Ethernet port on the device. As a best practice, connect the PC to the management Ethernet port on the device.

6.      Assign an IP address on the same subnet as the management port GigabitEthernet 1/0/0 to the PC.

In this example, assign 192.168.0.2 to the PC.

7.      Launch the Web browser, and enter 192.168.0.1 in the address bar.

The Web login page appears.

8.      Type the default username and password, and click Login.

9.      Select System > Upgrade Center > Software Upgrade from the navigation tree.

10.    Click Upgrade immediately on the Software Upgrade page.

11.    Select the startup file to be used, and click OK.

Figure 2 Upgrade Immediately page

Upgrading system software from BootWare menus

To upgrade Comware images from BootWare menus, use one of the following methods:

·            Using TFTP to upgrade system software through the management Ethernet port

·            Using FTP to upgrade system software through the management Ethernet port

Preparing for the upgrade

1.      Connect the configuration terminal to the MPU's console port.

2.      Connect the MPU's management Ethernet port to the TFTP or FTP file server.

The TFTP or FTP server can be co-located with the configuration terminal (typically, a PC).

3.      Prepare the upgrade file:

¡  If you are using TFTP, store the upgrade file on the TFTP server, and specify the directory.

¡  If you are using FTP, store the upgrade file on the FTP server, and specify the directory, FTP username, and password.

4.      Run the terminal emulation program on the configuration terminal.

5.      Power on the device, and then press Ctrl+B within 5 seconds at prompt to access the EXTEND-BOOTWARE menu (see "Using the EXTENDED-BOOTWARE menu").

Using TFTP to upgrade system software through the management Ethernet port

1.      Enter 3 in the EXTEND-BOOTWARE menu to access the Ethernet submenu.

==========================<Enter Ethernet SubMenu>==========================

|Note:the operating device is sda0                                         |

|<1> Download Image Program To SDRAM And Run                               |

|<2> Update Main Image File                                                |

|<3> Update Backup Image File                                              |

|<4> Download Files(*.*)                                                   |

|<5> Modify Ethernet Parameter                                             |

|<0> Exit To Main Menu                                                     |

|<Ensure The Parameter Be Modified Before Downloading!>                    |

============================================================================

Enter your choice(0-5):

2.      Enter 5 in the Ethernet submenu to configure the network settings.

======================<ETHERNET PARAMETER SET>==============================

|Note:       '.' = Clear field.                                            |

|            '-' = Go to previous field.                                   |

|          Ctrl+D = Quit.                                                  |

============================================================================

Protocol (FTP or TFTP):tftp

Load File Name        :main.ipe

Target File Name      :main.ipe

Server IP Address     :192.168.0.2

Local IP Address      :192.168.0.1

Subnet Mask            :255.255.255.0

Gateway IP Address    :0.0.0.0

Table 9 Network parameter fields and shortcut keys

After you finish setting the TFTP parameters, the system returns to the Ethernet submenu.

==========================<Enter Ethernet SubMenu>==========================

|Note:the operating device is sda0                                        |

|<1> Download Image Program To SDRAM And Run                               |

|<2> Update Main Image File                                                |

|<3> Update Backup Image File                                              |

|<4> Download Files(*.*)                                                   |

|<5> Modify Ethernet Parameter                                             |

|<0> Exit To Main Menu                                                     |

|<Ensure The Parameter Be Modified Before Downloading!>                    |

============================================================================

Enter your choice(0-5):

3.      Enter 2 or 3 in the Ethernet submenu to upgrade the main or backup software images. For example, enter 2 to upgrade the main software images.

Loading.....................................................................

............................................................................

.........................Done!

94786560 bytes downloaded!

Image file main-cmw710-boot-A9615.bin is self-decompressing...

Saving file sda0:/main-cmw710-boot-A9615.bin ......Done.

Image file main-cmw710-system-A9615.bin is self-decompressing...

Saving file sda0:/main-cmw710-system-A9615.bin .......................

............................................................................

..................Done.  .

==========================<Enter Ethernet SubMenu>==========================

|Note:the operating device is sda0                                        |

|<1> Download Image Program To SDRAM And Run                               |

|<2> Update Main Image File                                                |

|<3> Update Backup Image File                                              |

|<4> Download Files(*.*)                                                   |

|<5> Modify Ethernet Parameter                                             |

|<0> Exit To Main Menu                                                     |

|<Ensure The Parameter Be Modified Before Downloading!>                    |

============================================================================

Enter your choice(0-5):

4.      Enter 0 in the Ethernet submenu to return to the EXTEND-BOOTWARE menu.

5.      Enter 1 in the EXTEND-BOOTWARE menu to run the new Comware images.

Using FTP to upgrade system software through the management Ethernet port

1.      Enter 3 in the EXTEND-BOOTWARE menu to access the Ethernet submenu.

==========================<Enter Ethernet SubMenu>==========================

|Note:the operating device is sda0                                        |

|<1> Download Image Program To SDRAM And Run                               |

|<2> Update Main Image File                                                |

|<3> Update Backup Image File                                              |

|<4> Download Files(*.*)                                                   |

|<5> Modify Ethernet Parameter                                             |

|<0> Exit To Main Menu                                                     |

|<Ensure The Parameter Be Modified Before Downloading!>                    |

============================================================================

Enter your choice(0-5):

2.      Enter 5 in the Ethernet submenu to configure the network settings.

======================<ETHERNET PARAMETER SET>==============================

|Note:       '.' = Clear field.                                            |

|            '-' = Go to previous field.                                   |

|          Ctrl+D = Quit.                                                  |

============================================================================

Protocol (FTP or TFTP):ftp

Load File Name        :main.ipe

Target File Name      :main.ipe

Server IP Address     :192.168.0.2

Local IP Address      :192.168.0.1

Subnet Mask           :255.255.255.0

Gateway IP Address    :0.0.0.0

FTP User Name         :admin

FTP User Password     :******

Table 10 Network parameter fields and shortcut keys

After you finish setting the FTP parameters, the system returns to the Ethernet submenu.

==========================<Enter Ethernet SubMenu>==========================

|Note:the operating device is sda0                                         |

|<1> Download Image Program To SDRAM And Run                               |

|<2> Update Main Image File                                                |

|<3> Update Backup Image File                                              |

|<4> Download Files(*.*)                                                   |

|<5> Modify Ethernet Parameter                                             |

|<0> Exit To Main Menu                                                     |

|<Ensure The Parameter Be Modified Before Downloading!>                    |

============================================================================

Enter your choice(0-5):

3.      Enter 2 or 3 in the Ethernet submenu to upgrade the main or backup software images. For example, enter 2 to upgrade the main software images.

Loading.....................................................................

............................................................................

.........................Done!

94786560 bytes downloaded!

Image file main-cmw710-boot-A9615.bin is self-decompressing...

Saving file sda0:/main-cmw710-boot-A9615.bin ......Done.

Image file main-cmw710-system-A9615.bin is self-decompressing...

Saving file sda0:/main-cmw710-system-A9615.bin .......................

............................................................................

..................Done.

==========================<Enter Ethernet SubMenu>==========================

|Note:the operating device is sda0                                         |

|<1> Download Image Program To SDRAM And Run                               |

|<2> Update Main Image File                                                |

|<3> Update Backup Image File                                              |

|<4> Download Files(*.*)                                                   |

|<5> Modify Ethernet Parameter                                             |

|<0> Exit To Main Menu                                                     |

|<Ensure The Parameter Be Modified Before Downloading!>                    |

============================================================================

Enter your choice(0-5):

4.      Enter 0 in the Ethernet submenu to return to the EXTEND-BOOTWARE menu.

5.      Enter 1 in the EXTEND-BOOTWARE menu to run the new system software.

Upgrading the BootWare

You can upgrade the BootWare from the CLI or BootWare menus.

Upgrading the BootWare from the CLI

Whether a .btw file is compressed together with an .ipe file depends on the device model and software release. Please check it with H3C technical support. This section describes only how to upgrade the BootWare from the CLI.

To upgrade the BootWare from the CLI:

6.      Use FTP or TFTP to download or upload the new BootWare image file to the root directory of the storage medium on the device.

7.      Execute the bootrom update command to upgrade the BootWare.

<System> bootrom update file cfa0:/main.btw slot 2

  This command will update bootrom file, Continue? [Y/N]:y

  Now updating bootrom, please wait...

 Updating basic bootrom!

 Update basic bootrom success!

 Updating extended bootrom!

 Update extended bootrom success!

 Update bootrom success!

<System>

8.      Execute the reboot command to reboot the device.

Upgrading BootWare from BootWare menus

To upgrade the BootWare image from BootWare menus, use one of the following methods:

·            Using TFTP to upgrade BootWare through the management Ethernet port

·            Using FTP to upgrade BootWare through the management Ethernet port

For more information about BootWare menus, see " Using BootWare menus."

Preparing for the upgrade

1.      Connect the MPU's console port to the configuration terminal.

2.      Connect the MPU's management Ethernet port to the TFTP or FTP file server.

The TFTP or FTP server can be co-located with the configuration terminal (typically, a PC).

3.      Prepare the upgrade file:

¡  If you are using TFTP, store the upgrade file on the TFTP server, and specify the file directory.

¡  If you are using FTP, store the upgrade file on the FTP server, and specify the file directory, FTP username, and password.

4.      Run the terminal emulation program on the configuration terminal.

5.      Power on the device, and then press Ctrl+B within 5 seconds at prompt to access the EXTEND-BOOTWARE menu (see "Using the EXTENDED-BOOTWARE menu").

Using TFTP to upgrade BootWare through the management Ethernet port

1.      Enter 7 in the BootWare menu to access the BootWare Operation submenu.

=========================<BootWare Operation Menu>==========================

|Note:the operating device is sda0                                        |

|<1> Backup Full BootWare                                                  |

|<2> Restore Full BootWare                                                 |

|<3> Update BootWare By Serial                                             |

|<4> Update BootWare By Ethernet                                           |

|<0> Exit To Main Menu                                                     |

============================================================================

Enter your choice(0-4):

2.      Enter 4 in the BootWare Operation submenu to enter the Ethernet submenu.

===================<BOOTWARE OPERATION ETHERNET SUB-MENU>===================

|<1> Update Full BootWare                                                  |

|<2> Update Extended BootWare                                              |

|<3> Update Basic BootWare                                                 |

|<4> Modify Ethernet Parameter                                             |

|<0> Exit To Main Menu                                                     |

============================================================================

Enter your choice(0-4):

3.      Enter 4 in the Ethernet submenu to configure the network settings.

==========================<ETHERNET PARAMETER SET>==========================

|Note:       '.' = Clear field.                                            |

|            '-' = Go to previous field.                                   |

|          Ctrl+D = Quit.                                                  |

============================================================================

Protocol (FTP or TFTP):tftp

Load File Name         :Main.btw

                       :

Target File Name       :Main.btw

                       :

Server IP Address      :192.168.0.2

Local IP Address       :192.168.0.1

Subnet Mask            :255.255.255.0

Gateway IP Address     :0.0.0.0

For more information about the fields, see Table 9.

After you finish setting the TFTP parameters, the system returns to the BOOTWARE OPERATION ETHERNET submenu.

===================<BOOTWARE OPERATION ETHERNET SUB-MENU>===================

|<1> Update Full BootWare                                                  |

|<2> Update Extended BootWare                                              |

|<3> Update Basic BootWare                                                 |

|<4> Modify Ethernet Parameter                                             |

|<0> Exit To Main Menu                                                     |

============================================================================

Enter your choice(0-4):

4.      Choose an option from options 1 to 3. For example, enter 1 to upgrade the entire BootWare image.

Loading..............Done.

64245 bytes downloaded!

Updating Basic BootWare? [Y/N]

5.      Enter Y to upgrade the basic BootWare segment.

Updating Basic BootWare........Done.

Updating Extended BootWare? [Y/N]

6.      Enter Y to upgrade the extended BootWare segment.

Updating Extended BootWare.........Done!

===================<BOOTWARE OPERATION ETHERNET SUB-MENU>===================

|<1> Update Full BootWare                                                  |

|<2> Update Extended BootWare                                              |

|<3> Update Basic BootWare                                                 |

|<4> Modify Ethernet Parameter                                             |

|<0> Exit To Main Menu                                                     |

============================================================================

Enter your choice(0-4):

7.      Enter 0 to return to the BootWare Operation menu.

8.      Enter 0 in the BootWare Operation menu to return to the EXTEND-BOOTWARE menu.

9.      Enter 0 in the EXTEND-BOOTWARE menu to reboot the system.

Using FTP to upgrade BootWare through the management Ethernet port

1.      Enter 7 in the BootWare menu to access the BootWare Operation submenu.

=========================<BootWare Operation Menu>==========================

|Note:the operating device is sda0                                        |

|<1> Backup Full BootWare                                                  |

|<2> Restore Full BootWare                                                 |

|<3> Update BootWare By Serial                                             |

|<4> Update BootWare By Ethernet                                           |

|<0> Exit To Main Menu                                                     |

============================================================================

Enter your choice(0-4):

2.      Enter 4 in the BootWare Operation submenu to enter the Ethernet submenu.

===================<BOOTWARE OPERATION ETHERNET SUB-MENU>===================

|<1> Update Full BootWare                                                  |

|<2> Update Extended BootWare                                              |

|<3> Update Basic BootWare                                                 |

|<4> Modify Ethernet Parameter                                             |

|<0> Exit To Main Menu                                                     |

============================================================================

Enter your choice(0-4):

3.      Enter 4 in the Ethernet submenu to configure the network settings.

==========================<ETHERNET PARAMETER SET>==========================

|Note:       '.' = Clear field.                                            |

|            '-' = Go to previous field.                                   |

|          Ctrl+D = Quit.                                                  |

============================================================================

Protocol (FTP or TFTP) :ftp

Load File Name         :Main.btw

                       :

Target File Name       :Main.btw

                       :

Server IP Address      :192.168.0.2

Local IP Address       :192.168.0.1

Subnet Mask            :255.255.255.0

Gateway IP Address     :0.0.0.0

FTP User Name          :admin

FTP User Password      :******

For more information about the fields, see Table 10.

After you finish setting the FTP parameters, the system returns to the BOOTWARE OPERATION ETHERNET submenu.

===================<BOOTWARE OPERATION ETHERNET SUB-MENU>===================

|<1> Update Full BootWare                                                  |

|<2> Update Extended BootWare                                              |

|<3> Update Basic BootWare                                                 |

|<4> Modify Ethernet Parameter                                             |

|<0> Exit To Main Menu                                                     |

============================================================================

Enter your choice(0-4):

4.      Choose an option from options 1 to 3. For example, enter 1 to upgrade the entire BootWare image.

Loading.......Done.

64245 bytes downloaded!

Updating Basic BootWare? [Y/N]

5.      Enter Y to upgrade the basic BootWare segment.

Updating Basic BootWare........Done.

Updating Extended BootWare? [Y/N]

6.      Enter Y to upgrade the extended BootWare segment.

Updating Extended BootWare.........Done.

===================<BOOTWARE OPERATION ETHERNET SUB-MENU>===================

|<1> Update Full BootWare                                                  |

|<2> Update Extended BootWare                                              |

|<3> Update Basic BootWare                                                 |

|<4> Modify Ethernet Parameter                                             |

|<0> Exit To Main Menu                                                     |

============================================================================

Enter your choice(0-4):

7.      Enter 0 to return to the BootWare Operation menu.

8.      Enter 0 in the BootWare Operation menu to return to the EXTEND-BOOTWARE menu.

9.      Enter 0 in the EXTEND-BOOTWARE menu to reboot the system.

Handling software upgrade failures

If a software upgrade fails, the system runs the old software version. To handle a software failure:

10.    Check the physical ports for a loose or incorrect connection, and verify that the LEDs are reflecting the correct port status.

11.    If you are using the console port for file transfer, check the HyperTerminal settings (including the baud rate and data bits) for any wrong setting.

12.    Check the file transfer settings:

¡  If TFTP is used, you must enter the same server IP addresses, file name, and working directory as set on the TFTP server.

¡  If FTP is used, you must enter the same FTP server IP address, source file name, working directory, and FTP username and password as set on the FTP server.

13.    Check the FTP or TFTP server for incorrect settings.

14.    Check that the CF card has sufficient space for the upgrade file.

15.    If the message "Something is wrong with the file" appears, check the file for file corruption.

Appendix C  Using BootWare menus

Overview

BootWare provides a menu method to perform basic file operations, software upgrade, and system management when the Comware CLI is inaccessible because of image corruption.

BootWare is stored in each MPU's built-in the SD card. It has one basic segment and one extended segment. The basic segment enables the system to complete basic initialization, and the extended segment bootstraps the Comware images.

BootWare menus

Table 11 lists the menus that each segment provides and the major tasks you can perform using these menus. You can access these menus only during system startup.

Table 11 BootWare menus

BootWare shortcut keys

BootWare provides the shortcut keys listed in Table 12.

Table 12 BootWare shortcut keys

Using the BASIC-BOOTWARE menu

Accessing the BASIC-BOOTWARE menu

16.    Power on the device.

17.    Press Ctrl+D within 4 seconds after the "Press Ctrl+D to access BASIC-BOOTWARE MENU" prompt message appears. If you fail to do this within the time limit, the system starts to run the extended BootWare segment.

======================<BASIC-BOOTWARE MENU(Ver 1.19)>=======================

|<1> Modify Serial Interface Parameter                                     |

|<2> Update Extended BootWare                                              |

|<3> Update Full BootWare                                                  |

|<4> Boot Extended BootWare                                                |

|<5> Boot Backup Extended BootWare                                         |

|<0> Reboot                                                                |

============================================================================

Ctrl+U: Access BASIC ASSISTANT MENU

Enter your choice(0-5):

Table 13 BASIC-BOOTWARE menu options

Modifying serial port parameters

To change the baud rate of the console port:

18.    Enter 1 in the BASIC-BOOTWARE menu.

Enter your choice(0-5): 1

===============================<BAUDRATE SET>===============================

|Note:'*'indicates the current baudrate                                    |

|     Change The HyperTerminal's Baudrate Accordingly                      |

|---------------------------<Baudrate Available>---------------- ----------|

|<1> 9600(Default)*                                                        |

|<2> 19200                                                                 |

|<3> 38400                                                                 |

|<4> 57600                                                                 |

|<5> 115200                                                                |

|<0> Exit                                                                  |

============================================================================

Enter your choice(0-5):

19.    Enter the number that represents the baud rate you want to choose. For example, enter 5 to set the baud rate to 115200 bps.

Upgrading the extended BootWare segment

Enter 2 in the BASIC-BOOTWARE menu.

Enter your choice(0-5): 2

Please Start To Transfer File, Press <Ctrl+C> To Exit.

Waiting ...CCC

Upgrading the entire BootWare

Enter 3 in the BASIC-BOOTWARE menu.

Enter your choice(0-5): 3

Please Start To Transfer File, Press <Ctrl+C> To Exit.

Waiting ...CCC

Running the primary extended BootWare segment

Enter 4 in the BASIC-BOOTWARE menu.

Enter your choice(0-5): 4

Booting Normal Extended BootWare.

The Extended BootWare is self-decompressing....Done.

****************************************************************************

*                                                                          *

*                   H3C SecPath BootWare, Version 1.05                     *

*                                                                          *

****************************************************************************

Copyright (c) 2004-2017 New H3C Technologies Co., Ltd.

Compiled Date       : Aug 31 2017

Memory Type         : DDR3 SDRAM

Memory Size         : 16384MB

Sda0 Size          : 8MB

sda0 Size           : 3728MB

CPLD Version        : 1.0

PCB Version         : Ver.B

BootWare Validating...

Press Ctrl+B to access EXTENDED-BOOTWARE MENU...

Loading the main image files...

Loading file sda0:/Main-CMW710-SYSTEM-A9615.bin. ......................

............................................................................

...........................Done.

Image file sda0:/Main-CMW710-BOOT-A9615.bin is self-decompressing......

.................................................Done.

System image is starting...

Running the backup extended BootWare segment

Enter 5 in the BASIC-BOOTWARE menu.

For information about backing up the extended BootWare segment, see "Accessing the BootWare Operation submenu."

Enter your choice(0-5): 5

Booting Backup Extended BootWare.

The Extended BootWare is self-decompressing............................Done!

Accessing the BASIC ASSISTANT menu

Press Ctrl+U in the BASIC-BOOTWARE menu.

===========================<BASIC-ASSISTANT MENU>===========================

|<1> RAM Test                                                              |

|<0> Exit To Main Menu                                                     |

============================================================================

Enter your choice(0-1):

Table 14 BASIC ASSISTANT menu options

Testing the memory

To test the memory, use one of the following methods:

·            In the BASIC-BOOTWARE menu, press Ctrl+T within 4 seconds after the "Press Ctrl+T to start memory test" prompt message appears.

·            In the BASIC-BOOTWARE menu, press Ctrl+U to access the BASIC ASSISTANT menu.

Using the EXTENDED-BOOTWARE menu

Accessing the EXTENDED-BOOTWARE menu

20.    Power on the device.

21.    Press Ctrl+B within 5 seconds after the "Press Ctrl+B to access EXTENDED-BOOTWARE MENU..." prompt message appears. If you fail to do this within the time limit, the system starts up.

System is starting...

Press Ctrl+D to access BASIC-BOOTWARE MENU...

Press Ctrl+T to start heavy memory test..

Booting Normal Extended BootWare

The Extended BootWare is self-decompressing....Done.

****************************************************************************

*                                                                          *

*                   H3C SecPath BootWare, Version 1.05                     *

*                                                                          *

****************************************************************************

Copyright (c) 2004-2017 New H3C Technologies Co., Ltd.

Compiled Date       : Aug 31 2017

Memory Type         : DDR3 SDRAM

Memory Size         : 16384MB

Sda0 Size          : 8MB

sda0 Size           : 3728MB

CPLD Version        : 1.0

PCB Version         : Ver.B

BootWare Validating...

Press Ctrl+B to access EXTENDED-BOOTWARE MENU...

Password recovery capability is enabled.

Note: The current operating device is sda0

Enter < Storage Device Operation > to select device.

22.    Press Enter to access the EXTENDED-BOOTWARE menu.

===========================<EXTENDED-BOOTWARE MENU>=========================

|<1> Boot System                                                           |

|<2> Enter Serial SubMenu                                                  |

|<3> Enter Ethernet SubMenu                                                |

|<4> File Control                                                          |

|<5> Restore to Factory Default Configuration                              |

|<6> Skip Current System Configuration                                     |

|<7> BootWare Operation Menu                                               |

|<8> Skip Authentication for Console Login                                 |

|<9> Storage Device Operation                                              |

|<0> Reboot                                                                |

============================================================================

Ctrl+Z: Access EXTENDED ASSISTANT MENU

Ctrl+F: Format File System

Enter your choice(0-9):   

Availability of some options in this menu depends on the password recovery capability state (displayed on top of the EXTEND-BOOTWARE menu). For more information about the feature, see "Controlling the password recovery capability."

Table 15 EXTENDED-BOOTWARE menu options

Controlling the password recovery capability

Password recovery capability controls console user access to the device configuration from BootWare menus. This feature decides the method to handle a password loss situation.

·            If password recovery capability is enabled, a console user can handle a password loss situation as follows:

¡  If the console login password is lost, the user can skip console login authentication, and then access the CLI to configure a new password.

¡  If a user role password is lost, the user can skip the configuration file, and then access the CLI to configure a new password.

·            If password recovery capability is disabled, console users must restore the factory-default configuration before they can configure new passwords.

To enhance system security, disable password recovery capability.

To enable or disable password recovery capability:

Running Comware images

Enter 1 in the EXTEND-BOOTWARE menu.

Enter your choice(0-9): 1

Loading the main image files...

Loading file cfa0:/main-cmw710-system-e8526.bin.........................

............................................................................

.....................................................Done.

Loading file cfa0:/main-cmw710-boot-e8526.bin...........................

...................................Done.

Image file cfa0:/main-cmw710-boot-e8526.bin is self-decompressing.......

............................................................................

........Done.

System image is starting...

Accessing the Serial submenu

Enter 2 in the EXTEND-BOOTWARE menu.

Enter your choice(0-9): 2

===========================<Enter Serial SubMenu>===========================

|Note:the operating device is sda0                                        |

|<1> Download Image  Program To SDRAM And Run                              |

|<2> Update Main Image File                                                |

|<3> Update Backup Image File                                              |

|<4> Download Files(*.*)                                                   |

|<5> Modify Serial Interface Parameter                                     |

|<0> Exit To Main Menu                                                     |

============================================================================

Enter your choice(0-5):

Table 16 Serial submenu options

Accessing the Ethernet submenu

You can upgrade the Comware software through the management Ethernet port from the Ethernet submenu and configure file transfer settings.

23.    Enter 3 in the EXTENDED-BOOTWARE menu and press Enter to access the Ethernet submenu.

Enter your choice(0-9):3

==========================<Enter Ethernet SubMenu>==========================

|Note:the operating device is sda0                                        |

|<1> Download Image Program To SDRAM And Run                               |

|<2> Update Main Image File                                                |

|<3> Update Backup Image File                                              |

|<4> Download Files(*.*)                                                   |

|<5> Modify Ethernet Parameter                                             |

|<0> Exit To Main Menu                                                     |

|<Ensure The Parameter Be Modified Before Downloading!>                    |

============================================================================

Enter your choice(0-5):  

Table 17 Ethernet submenu options

24.    Enter 4 in the Ethernet submenu to configure file transfer settings on the MPU.

Enter your choice(0-4):4

======================<ETHERNET PARAMETER SET>=============================

|Note:       '.' = Clear field.                                           |

|            '-' = Go to previous field.                                  |

|          Ctrl+D = Quit.                                                 |

===========================================================================

Protocol (FTP or TFTP) :ftp

Load File Name         :main.ipe

                       :

Target File Name       :main.ipe

                       :

Server IP Address      :192.168.0.2

Local IP Address       :192.168.0.1

Subnet Mask            :255.255.255.0

Gateway IP Address     :0.0.0.0

FTP User Name          :admin

FTP User Password      :******

Table 18 Setting Ethernet parameters for file transfer

Managing files

You can display all files, set the attribute for a file, and delete a file from the File Control submenu.

Enter 4 in the EXTEND-BOOTWARE menu and then press Enter to access the File Control submenu.

Enter your choice(0-9):4

===============================<File CONTROL>===============================

|Note:the operating device is cfa0                                         |

|<1> Display All File(s)                                                   |

|<2> Set Image File type                                                   |

|<3> Set Bin File type                                                     |

|<4> Set Configuration File type                                           |

|<5> Delete File                                                           |

|<0> Exit To Main Menu                                                     |

============================================================================

Enter your choice(0-5):

Table 19 File Control submenu options

Displaying all files

Enter 1 in the File Control submenu.

Enter your choice(0-5): 1

Display all file(s) in cfa0:

 'M' = MAIN      'B' = BACKUP      'N/A' = NOT ASSIGNED

============================================================================

|NO. Size(B)   Time                 Type   Name                            |

|1   956       Jan/21/2019 17:59:34 N/A    cfa0:/ifindex.dat               |

|2   24671     Mar/28/2018 09:08:56 N/A    cfa0:/wdydiudie.cfg             |

|3   735       Mar/28/2018 09:18:22 N/A    cfa0:/hostkey                   |

|4   116549    Oct/09/2017 13:51:02 N/A    cfa0:/lwb-t5k.cfg               |

|5   963       Mar/27/2018 15:24:12 N/A    cfa0:/license/history/deviceid_2|

|0180327152412.did                                                         |

|6   965       Mar/27/2018 15:24:12 N/A    cfa0:/license/210235a1rsh1640000|

|06.did                                                                    |

|7   3237      Dec/25/2017 15:14:54 N/A    cfa0:/license/ngips2017122515235|

|923325.ak                                                                 |

|8   3249      Apr/16/2018 16:40:28 N/A    cfa0:/license/ngips2018041616523|

|608292.ak                                                                 |

|9   1611429   Jan/22/2019 14:14:22 N/A    cfa0:/logfile/logfile.log       |

|10  1048575   Apr/16/2018 17:57:26 N/A    cfa0:/logfile/ips.log           |

|11  5230      Mar/19/2018 14:40:30 N/A    cfa0:/logfile/uflt.log          |

|12  1048405   Apr/16/2018 17:57:26 N/A    cfa0:/logfile/anti-vir.log      |

|13  44840     Aug/10/2017 15:25:46 N/A    cfa0:/logfile/dfilter.log       |

|14  14195     Jan/21/2019 16:47:54 N/A    cfa0:/logfile/cfglog.log        |

|15  251751    Jan/03/2019 09:09:56 N/A    cfa0:/diagfile/diagfile.log     |

|16  69784     Mar/28/2018 09:18:28 N/A    cfa0:/dpi/ips/predefined/ips_sig|

|pack_curr.dat                                                             |

|17  2373992   Mar/28/2018 09:18:28 N/A    cfa0:/dpi/ips/predefined/ips_sig|

|pack_back.dat                                                             |

|18  32027352  Apr/16/2018 16:56:28 N/A    cfa0:/dpi/av/predefined/av_sigpa|

|ck_curr.dat                                                               |

|19  9574536   Apr/16/2018 16:48:00 N/A    cfa0:/dpi/av/predefined/av_sigpa|

|ck_back.dat                                                               |

|20  68040     Mar/28/2018 09:18:28 N/A    cfa0:/dpi/uflt/predefined/uflt_s|

|igpack_curr.dat                                                           |

|21  10330760  Mar/28/2018 09:18:36 N/A    cfa0:/dpi/uflt/predefined/uflt_s|

|igpack_back.dat                                                           |

|22  342232    Mar/28/2018 09:18:24 N/A    cfa0:/dpi/apr/predefined/apr_sig|

|pack_curr.dat                                                             |

|23  979448    Mar/28/2018 09:18:24 N/A    cfa0:/dpi/apr/predefined/apr_sig|

|pack_back.dat                                                             |

|24  2840      Jan/22/2019 14:12:46 N/A    cfa0:/dpi/filereg/predefined/fil|

|ereg_sigpack_curr.dat                                                     |

|25  30        Jan/21/2019 16:53:16 N/A    cfa0:/dpi/dpi_sigpack.log       |

|26  1566      Mar/28/2018 09:18:20 N/A    cfa0:/pki/https-server.p12      |

|27  591       Mar/28/2018 09:18:22 N/A    cfa0:/serverkey                 |

|28  259308    Mar/28/2018 09:08:58 N/A    cfa0:/wdydiudie.mdb             |

|29  723419    Oct/09/2017 13:51:04 N/A    cfa0:/lwb-t5k.mdb               |

|30  22692     Jan/21/2019 17:59:36 M      cfa0:/startup.cfg               |

|31  686202    May/20/2017 19:15:56 N/A    cfa0:/pn.cfg                    |

|32  9275      Oct/28/2017 13:50:12 N/A    cfa0:/zp.cfg                    |

|33  807       Oct/09/2017 15:59:54 N/A    cfa0:/.trash/.trashinfo         |

|34  5327872   Aug/15/2017 13:06:42 N/A    cfa0:/.trash/main-cmw710-boo|

|t-e8518.bin_0001                                                          |

|35  5331968   Aug/15/2017 10:30:04 N/A    cfa0:/.trash/main-cmw710-boo|

|t-e8519.bin_0001                                                          |

|36  9048064   Aug/21/2017 13:54:12 N/A    cfa0:/.trash/main-cmw710-boo|

|t-e8520.bin_0001                                                          |

|37  2056192   Aug/12/2017 18:05:54 N/A    cfa0:/.trash/main-cmw710-dev|

|kit-e8518.bin_0001                                                        |

|38  163840    Aug/14/2017 16:57:06 N/A    cfa0:/.trash/main-cmw710-dev|

|kit-e8519.bin_0001                                                        |

|39  163840    Aug/21/2017 14:07:26 N/A    cfa0:/.trash/main-cmw710-dev|

|kit-e8520.bin_0001                                                        |

|40  103891968 Aug/15/2017 13:07:04 N/A    cfa0:/.trash/main-cmw710-sys|

|tem-e8518.bin_0001                                                        |

|41  107120640 Aug/15/2017 10:30:58 N/A    cfa0:/.trash/main-cmw710-sys|

|tem-e8519.bin_0001                                                        |

|42  171900928 Aug/21/2017 14:07:02 N/A    cfa0:/.trash/main-cmw710-sys|

|tem-e8520.bin_0001                                                        |

|43  2238      Jan/22/2019 14:14:22 N/A    cfa0:/context/context3/logfile/l|

|ogfile.log                                                                |

|44  24        Jan/21/2019 17:59:50 N/A    cfa0:/context/context3/ifindex.d|

|at                                                                        |

|45  1192      Jan/21/2019 17:59:50 N/A    cfa0:/context/context3/startup.c|

|fg                                                                        |

|46  34023     Jan/21/2019 17:59:50 N/A    cfa0:/context/context3/startup.m|

|db                                                                        |

|47  18468     Jan/22/2019 14:14:22 N/A    cfa0:/context/context4/logfile/l|

|ogfile.log                                                                |

|48  1566      Mar/28/2018 09:19:08 N/A    cfa0:/context/context4/pki/https|

|-server.p12                                                               |

|49  1671      Jan/22/2019 09:27:00 N/A    cfa0:/context/context4/startup.c|

|fg                                                                        |

|50  37050     Jan/22/2019 09:27:00 N/A    cfa0:/context/context4/startup.m|

|db                                                                        |

|51  52        Jan/22/2019 09:27:00 N/A    cfa0:/context/context4/ifindex.d|

|at                                                                        |

|52  9054208   Apr/20/2018 13:27:02 N/A    cfa0:/main-cmw710-boot-e8526|

|.bin                                                                      |

|53  227919    Jan/21/2019 17:59:36 N/A    cfa0:/startup.mdb               |

|54  186294272 Apr/20/2018 13:27:30 N/A    cfa0:/main-cmw710-system-e85|

|26.bin                                                                    |

|55  123384832 Jan/21/2019 17:20:04 N/A    cfa0:/main.ipe             |

|56  3920      Jul/19/2017 18:32:04 N/A    cfa0:/86.raw                    |

|57  3242      Jul/07/2017 09:36:50 N/A    cfa0:/ngips2017070709142354252.a|

|k                                                                         |

|58  120804    Jun/17/2017 17:00:30 N/A    cfa0:/1.cfg                     |

|59  822025    Jun/17/2017 17:00:34 N/A    cfa0:/1.mdb                     |

|60  120727    Jun/17/2017 17:01:02 N/A    cfa0:/2.cfg                     |

|61  821866    Jun/17/2017 17:01:06 N/A    cfa0:/2.mdb                     |

|62  16        Jan/21/2019 17:48:10 N/A    cfa0:/versioninfo/versionctl.dat|

|63  536       Jan/21/2019 17:48:10 N/A    cfa0:/versioninfo/version0.dat  |

|64  796       Mar/20/2018 16:23:44 N/A    cfa0:/versioninfo/version1.dat  |

|65  796       Mar/20/2018 16:30:22 N/A    cfa0:/versioninfo/version2.dat  |

|66  796       Mar/20/2018 16:32:22 N/A    cfa0:/versioninfo/version3.dat  |

|67  796       Mar/20/2018 16:39:04 N/A    cfa0:/versioninfo/version4.dat  |

|68  536       Mar/27/2018 12:36:40 N/A    cfa0:/versioninfo/version5.dat  |

|69  796       Mar/27/2018 14:23:12 N/A    cfa0:/versioninfo/version6.dat  |

|70  536       Mar/28/2018 09:18:16 N/A    cfa0:/versioninfo/version7.dat  |

|71  796       Apr/16/2018 18:06:04 N/A    cfa0:/versioninfo/version8.dat  |

|72  536       Jul/24/2018 11:50:02 N/A    cfa0:/versioninfo/version9.dat  |

|73  9696      Sep/11/2017 17:41:56 N/A    cfa0:/libpty.so                 |

|74  500446    Jul/29/2017 17:59:46 N/A    cfa0:/ips.rules                 |

|75  19586056  Oct/16/2017 17:58:08 N/A    cfa0:/50w-2.dat                 |

|76  117405304 Oct/16/2017 15:38:20 N/A    cfa0:/500w-2.dat                |

|77  7125      Sep/11/2017 19:43:30 N/A    cfa0:/new1.rules                |

|78  963       Oct/16/2017 17:12:58 N/A    cfa0:/210235a1rsh164000006.did  |

|79  9172      Oct/26/2017 11:30:30 N/A    cfa0:/uzi.cfg                   |

|80  792001    May/20/2017 19:15:58 N/A    cfa0:/pn.mdb                    |

|81  554834    May/18/2017 15:40:52 N/A    cfa0:/fullconfig.cfg            |

|82  684919    May/19/2017 13:50:20 N/A    cfa0:/fullconfig2.cfg           |

|83  554834    May/18/2017 16:20:36 N/A    cfa0:/fullconfig1.cfg           |

|84  788347    May/19/2017 13:50:22 N/A    cfa0:/fullconfig2.mdb           |

|85  154433    Oct/26/2017 11:30:30 N/A    cfa0:/uzi.mdb                   |

|86  685411    May/23/2017 14:08:56 N/A    cfa0:/wdy0523.cfg               |

|87  791322    May/23/2017 14:08:58 N/A    cfa0:/wdy0523.mdb               |

|88  3246      Oct/16/2017 17:38:58 N/A    cfa0:/ngips2017101617275868747.a|

|k                                                                         |

|89  164864    Apr/20/2018 13:36:44 N/A    cfa0:/main-cmw710-devkit-e85|

|26.bin                                                                    |

|90  582397    Dec/25/2017 16:17:00 N/A    cfa0:/1024.rules                |

|91  93544     Dec/25/2017 16:17:30 N/A    cfa0:/url.dat                   |

|92  5684224   Jul/24/2018 11:39:04 N/A    cfa0:/main-cmw710-boot-e8530|

|.bin                                                                      |

|93  154961    Oct/28/2017 13:50:14 N/A    cfa0:/zp.mdb                    |

|94  504464    Oct/28/2017 19:22:12 N/A    cfa0:/5e9dd320d3c7fd6fbec3a81a85|

|788002.6d9ada99                                                           |

|95  2491008   Oct/29/2017 15:57:14 N/A    cfa0:/8ac3b6bff681d9be6a20f865ac|

|e15a14                                                                    |

|96  20        Jan/31/2018 14:20:10 N/A    cfa0:/.snmpboots                |

|97  2216      Apr/16/2018 18:05:22 N/A    cfa0:/pcap/excpt-currentcpu11-20|

|180117140659.cap                                                          |

|98  128016    Jan/17/2018 14:29:32 N/A    cfa0:/firewall.exp              |

|99  2812      Jan/17/2018 20:07:28 N/A    cfa0:/web/threat/cn/subthreatrep|

|ort.html                                                                  |

|100 1139      Jan/17/2018 20:07:28 N/A    cfa0:/web/threat/cn/threatid.htm|

|l                                                                         |

|101 2148      Jan/17/2018 20:07:28 N/A    cfa0:/web/threat/cn/threatlog.ht|

|ml                                                                        |

|102 2370      Jan/17/2018 20:07:28 N/A    cfa0:/web/threat/cn/threatrank.h|

|tml                                                                       |

|103 2067      Jan/17/2018 20:07:28 N/A    cfa0:/web/threat/cn/threatrankdl|

|g.html                                                                    |

|104 4122      Jan/17/2018 20:07:28 N/A    cfa0:/web/threat/cn/threatreport|

|.html                                                                     |

|105 3571      Jan/17/2018 20:07:28 N/A    cfa0:/web/threat/cn/threattrend.|

|html                                                                      |

|106 2857      Jan/17/2018 20:07:28 N/A    cfa0:/web/threat/en/subthreatrep|

|ort.html                                                                  |

|107 1429      Jan/17/2018 20:07:28 N/A    cfa0:/web/threat/en/threatlog.ht|

|ml                                                                        |

|108 2651      Jan/17/2018 20:07:28 N/A    cfa0:/web/threat/en/threatrank.h|

|tml                                                                       |

|109 2419      Jan/17/2018 20:07:28 N/A    cfa0:/web/threat/en/threatrankdl|

|g.html                                                                    |

|110 4213      Jan/17/2018 20:07:28 N/A    cfa0:/web/threat/en/threatreport|

|.html                                                                     |

|111 2721      Jan/17/2018 20:07:28 N/A    cfa0:/web/threat/en/threattrend.|

|html                                                                      |

|112 14068     Jan/17/2018 20:07:28 N/A    cfa0:/web/threat/nc.js          |

|113 36539     Jan/17/2018 20:07:28 N/A    cfa0:/web/threat/netconf.rbac   |

|114 19541     Jan/17/2018 20:07:28 N/A    cfa0:/web/threat/subthreatreport|

|.js                                                                       |

|115 13032     Jan/17/2018 20:07:28 N/A    cfa0:/web/threat/threatid.js    |

|116 98591     Jan/17/2018 20:10:04 N/A    cfa0:/web/threat/threatlog.js   |

|117 55749     Jan/17/2018 20:07:30 N/A    cfa0:/web/threat/threatrank.js  |

|118 37582     Jan/17/2018 20:07:30 N/A    cfa0:/web/threat/threatrankdlg.j|

|s                                                                         |

|119 31328     Jan/17/2018 20:07:30 N/A    cfa0:/web/threat/threatreport.js|

|120 133659    Jan/17/2018 20:07:30 N/A    cfa0:/web/threat/threattrend.js |

|121 106004480 Jul/24/2018 11:39:24 N/A    cfa0:/main-cmw710-system-e85|

|30.bin                                                                    |

|122 5692416   Jan/21/2019 17:29:52 M      cfa0:/main-cmw710-boot-e8524|

|p15.bin                                                                   |

|123 117685248 Jan/21/2019 17:30:12 M      cfa0:/main-cmw710-system-e85|

|24p15.bin                                                                 |

|124 7300      Jan/24/2018 08:53:08 N/A    cfa0:/0a704f6998e9602ac5203b1306|

|7b2317                                                                    |

|125 151348    Jun/05/2017 16:40:44 N/A    cfa0:/o.mdb                     |

|126 17704     Jan/31/2018 09:44:08 N/A    cfa0:/dpi.cfg                   |

|127 235207    Jan/31/2018 09:44:10 N/A    cfa0:/dpi.mdb                   |

|128 17659     Jan/31/2018 10:53:24 N/A    cfa0:/dpi1.cfg                  |

|129 231817    Jan/31/2018 10:53:26 N/A    cfa0:/dpi1.mdb                  |

|130 110592    Jan/31/2018 14:31:18 N/A    cfa0:/core/node16_dpid_202565_11|

|_20180131-143118_1517409078.core                                          |

|131 118784    Jul/24/2018 11:51:10 N/A    cfa0:/core/node16_ntopd_820_11_2|

|0180724-115110_1532433070.core                                            |

|132 118784    Dec/17/2018 08:32:20 N/A    cfa0:/core/node16_ntopd_803_11_2|

|0181217-083220_1545035540.core                                            |

|133 3249      Apr/16/2018 16:40:28 N/A    cfa0:/ngips2018041616523608292.a|

|k                                                                         |

============================================================================    

Setting the attribute for software images

1.      Enter 2 in the File Control submenu.

===============================<File CONTROL>===============================

|Note:the operating device is cfa0                                         |

|<1> Display All File(s)                                                   |

|<2> Set Image File type                                                   |

|<3> Set Bin File type                                                     |

|<4> Set Configuration File type                                           |

|<5> Delete File                                                           |

|<0> Exit To Main Menu                                                     |

============================================================================

Enter your choice(0-5): 2

 'M' = MAIN      'B' = BACKUP      'N/A' = NOT ASSIGNED

============================================================================

|NO. Size(B)   Time                 Type   Name                            |

|1   123384832 Jan/21/2019 17:20:04 N/A    cfa0:/main.ipe             |

|0   Exit                                                                  |

============================================================================ 

2.      Enter the numbers of the files you are working with. For example, enter 1.

Enter file No.:1

Modify the file attribute:

============================================================================

|<1>+Main                                                                  |

|<2>+Backup                                                                |

|<0> Exit                                                                  |

============================================================================

Enter your choice(0-2):

3.      Enter a number in the range of 0 to 2 to add or delete a file attribute for the files. For example, enter 1 to assign the M attribute to the files.

Enter your choice(0-2):1

This operation may take several minutes. Please wait....

The file is exist,will you overwrite it? [Y/N]Y

Image file main-cmw710-boot-E8524P15.bin is self-decompressing...

Saving file cfa0:/main-cmw710-boot-E8524P15.bin ........................

............................................................................

.................Done.

Image file main-cmw710-system-E8524P15.bin is self-decompressing...

Saving file cfa0:/main-cmw710-system-E8524P15.bin ......................

............................................................................

............................................................................

.....................................................................Done.

Set the file attribute success!

Setting the attribute for .bin files

Enter 3 in the File Control submenu.

Enter your choice(0-5): 3

'M' = MAIN      'B' = BACKUP      'N/A' = NOT ASSIGNED

============================================================================

|NO. Size(B)   Time                 Type   Name                            |

|1   9054208   Apr/20/2018 13:27:02 N/A    cfa0:/main-cmw710-boot-e8526|

|.bin                                                                      |

|2   186294272 Apr/20/2018 13:27:30 N/A    cfa0:/main-cmw710-system-e85|

|26.bin                                                                    |

|3   164864    Apr/20/2018 13:36:44 N/A    cfa0:/main-cmw710-devkit-e85|

|26.bin                                                                    |

|4   5684224   Jul/24/2018 11:39:04 N/A    cfa0:/main-cmw710-boot-e8530|

|.bin                                                                      |

|5   106004480 Jul/24/2018 11:39:24 N/A    cfa0:/main-cmw710-system-e85|

|30.bin                                                                    |

|6   5692416   Jan/22/2019 14:47:32 M      cfa0:/main-cmw710-boot-e8524|

|p15.bin                                                                   |

|7   117685248 Jan/22/2019 14:47:50 M      cfa0:/main-cmw710-system-e85|

|24p15.bin                                                                 |

|0   Exit                                                                  |

============================================================================

Note:Select .bin files. One but only one boot image and system image must

be included.

Enter file No.(Allows multiple selection):1

Enter another file No.(0-Finish choice):2

Enter another file No.(0-Finish choice):0

You have selected:

cfa0:/main-cmw710-boot-e8526.bin

cfa0:/main-cmw710-system-e8526.bin

Modify the file attribute:

============================================================================

|<1>+Main                                                                  |

|<2>+Backup                                                                |

|<0> Exit                                                                  |

============================================================================

Enter your choice(0-2):1

This operation may take several minutes. Please wait....

Set the file attribute success!

Deleting a file

1.      Enter 5 in the File Control submenu.

Enter your choice(0-5): 5

Deleting the file in cfa0:

 'M' = MAIN      'B' = BACKUP      'N/A' = NOT ASSIGNED

============================================================================

|NO. Size(B)   Time                 Type   Name                            |

|1   956       Jan/21/2019 17:59:34 N/A    cfa0:/ifindex.dat               |

|2   24671     Mar/28/2018 09:08:56 N/A    cfa0:/wdydiudie.cfg             |

|3   735       Mar/28/2018 09:18:22 N/A    cfa0:/hostkey                   |

|4   116549    Oct/09/2017 13:51:02 N/A    cfa0:/lwb-t5k.cfg               |

|5   963       Mar/27/2018 15:24:12 N/A    cfa0:/license/history/deviceid_2|

|0180327152412.did                                                         |

|6   965       Mar/27/2018 15:24:12 N/A    cfa0:/license/210235a1rsh1640000|

|06.did                                                                    |

|7   3237      Dec/25/2017 15:14:54 N/A    cfa0:/license/ngips2017122515235|

|923325.ak                                                                 |

|8   3249      Apr/16/2018 16:40:28 N/A    cfa0:/license/ngips2018041616523|

|608292.ak                                                                 |

|9   1611429   Jan/22/2019 14:14:22 N/A    cfa0:/logfile/logfile.log       |

|10  1048575   Apr/16/2018 17:57:26 N/A    cfa0:/logfile/ips.log           |

|11  5230      Mar/19/2018 14:40:30 N/A    cfa0:/logfile/uflt.log          |

|12  1048405   Apr/16/2018 17:57:26 N/A    cfa0:/logfile/anti-vir.log      |

|13  44840     Aug/10/2017 15:25:46 N/A    cfa0:/logfile/dfilter.log       |

|14  14195     Jan/21/2019 16:47:54 N/A    cfa0:/logfile/cfglog.log        |

|15  251751    Jan/03/2019 09:09:56 N/A    cfa0:/diagfile/diagfile.log     |

|16  69784     Mar/28/2018 09:18:28 N/A    cfa0:/dpi/ips/predefined/ips_sig|

|pack_curr.dat                                                             |

|17  2373992   Mar/28/2018 09:18:28 N/A    cfa0:/dpi/ips/predefined/ips_sig|

|pack_back.dat                                                             |

|18  32027352  Apr/16/2018 16:56:28 N/A    cfa0:/dpi/av/predefined/av_sigpa|

|ck_curr.dat                                                               |

|19  9574536   Apr/16/2018 16:48:00 N/A    cfa0:/dpi/av/predefined/av_sigpa|

|ck_back.dat                                                               |

|20  68040     Mar/28/2018 09:18:28 N/A    cfa0:/dpi/uflt/predefined/uflt_s|

|igpack_curr.dat                                                           |

|21  10330760  Mar/28/2018 09:18:36 N/A    cfa0:/dpi/uflt/predefined/uflt_s|

|igpack_back.dat                                                           |

|22  342232    Mar/28/2018 09:18:24 N/A    cfa0:/dpi/apr/predefined/apr_sig|

|pack_curr.dat                                                             |

|23  979448    Mar/28/2018 09:18:24 N/A    cfa0:/dpi/apr/predefined/apr_sig|

|pack_back.dat                                                             |

|24  2840      Jan/22/2019 14:12:46 N/A    cfa0:/dpi/filereg/predefined/fil|

|ereg_sigpack_curr.dat                                                     |

|25  30        Jan/21/2019 16:53:16 N/A    cfa0:/dpi/dpi_sigpack.log       |

|26  1566      Mar/28/2018 09:18:20 N/A    cfa0:/pki/https-server.p12      |

|27  591       Mar/28/2018 09:18:22 N/A    cfa0:/serverkey                 |

|28  259308    Mar/28/2018 09:08:58 N/A    cfa0:/wdydiudie.mdb             |

|29  723419    Oct/09/2017 13:51:04 N/A    cfa0:/lwb-t5k.mdb               |

|30  22692     Jan/21/2019 17:59:36 M      cfa0:/startup.cfg               |

|31  686202    May/20/2017 19:15:56 N/A    cfa0:/pn.cfg                    |

|32  9275      Oct/28/2017 13:50:12 N/A    cfa0:/zp.cfg                    |

|33  807       Oct/09/2017 15:59:54 N/A    cfa0:/.trash/.trashinfo         |

|34  5327872   Aug/15/2017 13:06:42 N/A    cfa0:/.trash/main-cmw710-boo|

|t-e8518.bin_0001                                                          |

|35  5331968   Aug/15/2017 10:30:04 N/A    cfa0:/.trash/main-cmw710-boo|

|t-e8519.bin_0001                                                          |

|36  9048064   Aug/21/2017 13:54:12 N/A    cfa0:/.trash/main-cmw710-boo|

|t-e8520.bin_0001                                                          |

|37  2056192   Aug/12/2017 18:05:54 N/A    cfa0:/.trash/main-cmw710-dev|

|kit-e8518.bin_0001                                                        |

|38  163840    Aug/14/2017 16:57:06 N/A    cfa0:/.trash/main-cmw710-dev|

|kit-e8519.bin_0001                                                        |

|39  163840    Aug/21/2017 14:07:26 N/A    cfa0:/.trash/main-cmw710-dev|

|kit-e8520.bin_0001                                                        |

|40  103891968 Aug/15/2017 13:07:04 N/A    cfa0:/.trash/main-cmw710-sys|

|tem-e8518.bin_0001                                                        |

|41  107120640 Aug/15/2017 10:30:58 N/A    cfa0:/.trash/main-cmw710-sys|

|tem-e8519.bin_0001                                                        |

|42  171900928 Aug/21/2017 14:07:02 N/A    cfa0:/.trash/main-cmw710-sys|

|tem-e8520.bin_0001                                                        |

|43  2238      Jan/22/2019 14:14:22 N/A    cfa0:/context/context3/logfile/l|

|ogfile.log                                                                |

|44  24        Jan/21/2019 17:59:50 N/A    cfa0:/context/context3/ifindex.d|

|at                                                                        |

|45  1192      Jan/21/2019 17:59:50 N/A    cfa0:/context/context3/startup.c|

|fg                                                                        |

|46  34023     Jan/21/2019 17:59:50 N/A    cfa0:/context/context3/startup.m|

|db                                                                        |

|47  18468     Jan/22/2019 14:14:22 N/A    cfa0:/context/context4/logfile/l|

|ogfile.log                                                                |

|48  1566      Mar/28/2018 09:19:08 N/A    cfa0:/context/context4/pki/https|

|-server.p12                                                               |

|49  1671      Jan/22/2019 09:27:00 N/A    cfa0:/context/context4/startup.c|

|fg                                                                        |

|50  37050     Jan/22/2019 09:27:00 N/A    cfa0:/context/context4/startup.m|

|db                                                                        |

|51  52        Jan/22/2019 09:27:00 N/A    cfa0:/context/context4/ifindex.d|

|at                                                                        |

|52  9054208   Apr/20/2018 13:27:02 M      cfa0:/main-cmw710-boot-e8526|

|.bin                                                                      |

|53  227919    Jan/21/2019 17:59:36 N/A    cfa0:/startup.mdb               |

|54  186294272 Apr/20/2018 13:27:30 M      cfa0:/main-cmw710-system-e85|

|26.bin                                                                    |

|55  123384832 Jan/21/2019 17:20:04 N/A    cfa0:/main.ipe             |

|56  3920      Jul/19/2017 18:32:04 N/A    cfa0:/86.raw                    |

|57  3242      Jul/07/2017 09:36:50 N/A    cfa0:/ngips2017070709142354252.a|

|k                                                                         |

|58  120804    Jun/17/2017 17:00:30 N/A    cfa0:/1.cfg                     |

|59  822025    Jun/17/2017 17:00:34 N/A    cfa0:/1.mdb                     |

|60  120727    Jun/17/2017 17:01:02 N/A    cfa0:/2.cfg                     |

|61  821866    Jun/17/2017 17:01:06 N/A    cfa0:/2.mdb                     |

|62  16        Jan/21/2019 17:48:10 N/A    cfa0:/versioninfo/versionctl.dat|

|63  536       Jan/21/2019 17:48:10 N/A    cfa0:/versioninfo/version0.dat  |

|64  796       Mar/20/2018 16:23:44 N/A    cfa0:/versioninfo/version1.dat  |

|65  796       Mar/20/2018 16:30:22 N/A    cfa0:/versioninfo/version2.dat  |

|66  796       Mar/20/2018 16:32:22 N/A    cfa0:/versioninfo/version3.dat  |

|67  796       Mar/20/2018 16:39:04 N/A    cfa0:/versioninfo/version4.dat  |

|68  536       Mar/27/2018 12:36:40 N/A    cfa0:/versioninfo/version5.dat  |

|69  796       Mar/27/2018 14:23:12 N/A    cfa0:/versioninfo/version6.dat  |

|70  536       Mar/28/2018 09:18:16 N/A    cfa0:/versioninfo/version7.dat  |

|71  796       Apr/16/2018 18:06:04 N/A    cfa0:/versioninfo/version8.dat  |

|72  536       Jul/24/2018 11:50:02 N/A    cfa0:/versioninfo/version9.dat  |

|73  9696      Sep/11/2017 17:41:56 N/A    cfa0:/libpty.so                 |

|74  500446    Jul/29/2017 17:59:46 N/A    cfa0:/ips.rules                 |

|75  19586056  Oct/16/2017 17:58:08 N/A    cfa0:/50w-2.dat                 |

|76  117405304 Oct/16/2017 15:38:20 N/A    cfa0:/500w-2.dat                |

|77  7125      Sep/11/2017 19:43:30 N/A    cfa0:/new1.rules                |

|78  963       Oct/16/2017 17:12:58 N/A    cfa0:/210235a1rsh164000006.did  |

|79  9172      Oct/26/2017 11:30:30 N/A    cfa0:/uzi.cfg                   |

|80  792001    May/20/2017 19:15:58 N/A    cfa0:/pn.mdb                    |

|81  554834    May/18/2017 15:40:52 N/A    cfa0:/fullconfig.cfg            |

|82  684919    May/19/2017 13:50:20 N/A    cfa0:/fullconfig2.cfg           |

|83  554834    May/18/2017 16:20:36 N/A    cfa0:/fullconfig1.cfg           |

|84  788347    May/19/2017 13:50:22 N/A    cfa0:/fullconfig2.mdb           |

|85  154433    Oct/26/2017 11:30:30 N/A    cfa0:/uzi.mdb                   |

|86  685411    May/23/2017 14:08:56 N/A    cfa0:/wdy0523.cfg               |

|87  791322    May/23/2017 14:08:58 N/A    cfa0:/wdy0523.mdb               |

|88  3246      Oct/16/2017 17:38:58 N/A    cfa0:/ngips2017101617275868747.a|

|k                                                                         |

|89  164864    Apr/20/2018 13:36:44 N/A    cfa0:/main-cmw710-devkit-e85|

|26.bin                                                                    |

|90  582397    Dec/25/2017 16:17:00 N/A    cfa0:/1024.rules                |

|91  93544     Dec/25/2017 16:17:30 N/A    cfa0:/url.dat                   |

|92  5684224   Jul/24/2018 11:39:04 N/A    cfa0:/main-cmw710-boot-e8530|

|.bin                                                                      |

|93  154961    Oct/28/2017 13:50:14 N/A    cfa0:/zp.mdb                    |

|94  504464    Oct/28/2017 19:22:12 N/A    cfa0:/5e9dd320d3c7fd6fbec3a81a85|

|788002.6d9ada99                                                           |

|95  2491008   Oct/29/2017 15:57:14 N/A    cfa0:/8ac3b6bff681d9be6a20f865ac|

|e15a14                                                                    |

|96  20        Jan/31/2018 14:20:10 N/A    cfa0:/.snmpboots                |

|97  2216      Apr/16/2018 18:05:22 N/A    cfa0:/pcap/excpt-currentcpu11-20|

|180117140659.cap                                                          |

|98  128016    Jan/17/2018 14:29:32 N/A    cfa0:/firewall.exp              |

|99  2812      Jan/17/2018 20:07:28 N/A    cfa0:/web/threat/cn/subthreatrep|

|ort.html                                                                  |

|100 1139      Jan/17/2018 20:07:28 N/A    cfa0:/web/threat/cn/threatid.htm|

|l                                                                         |

|101 2148      Jan/17/2018 20:07:28 N/A    cfa0:/web/threat/cn/threatlog.ht|

|ml                                                                        |

|102 2370      Jan/17/2018 20:07:28 N/A    cfa0:/web/threat/cn/threatrank.h|

|tml                                                                       |

|103 2067      Jan/17/2018 20:07:28 N/A    cfa0:/web/threat/cn/threatrankdl|

|g.html                                                                    |

|104 4122      Jan/17/2018 20:07:28 N/A    cfa0:/web/threat/cn/threatreport|

|.html                                                                     |

|105 3571      Jan/17/2018 20:07:28 N/A    cfa0:/web/threat/cn/threattrend.|

|html                                                                      |

|106 2857      Jan/17/2018 20:07:28 N/A    cfa0:/web/threat/en/subthreatrep|

|ort.html                                                                  |

|107 1429      Jan/17/2018 20:07:28 N/A    cfa0:/web/threat/en/threatlog.ht|

|ml                                                                        |

|108 2651      Jan/17/2018 20:07:28 N/A    cfa0:/web/threat/en/threatrank.h|

|tml                                                                       |

|109 2419      Jan/17/2018 20:07:28 N/A    cfa0:/web/threat/en/threatrankdl|

|g.html                                                                    |

|110 4213      Jan/17/2018 20:07:28 N/A    cfa0:/web/threat/en/threatreport|

|.html                                                                     |

|111 2721      Jan/17/2018 20:07:28 N/A    cfa0:/web/threat/en/threattrend.|

|html                                                                      |

|112 14068     Jan/17/2018 20:07:28 N/A    cfa0:/web/threat/nc.js          |

|113 36539     Jan/17/2018 20:07:28 N/A    cfa0:/web/threat/netconf.rbac   |

|114 19541     Jan/17/2018 20:07:28 N/A    cfa0:/web/threat/subthreatreport|

|.js                                                                       |

|115 13032     Jan/17/2018 20:07:28 N/A    cfa0:/web/threat/threatid.js    |

|116 98591     Jan/17/2018 20:10:04 N/A    cfa0:/web/threat/threatlog.js   |

|117 55749     Jan/17/2018 20:07:30 N/A    cfa0:/web/threat/threatrank.js  |

|118 37582     Jan/17/2018 20:07:30 N/A    cfa0:/web/threat/threatrankdlg.j|

|s                                                                         |

|119 31328     Jan/17/2018 20:07:30 N/A    cfa0:/web/threat/threatreport.js|

|120 133659    Jan/17/2018 20:07:30 N/A    cfa0:/web/threat/threattrend.js |

|121 106004480 Jul/24/2018 11:39:24 N/A    cfa0:/main-cmw710-system-e85|

|30.bin                                                                    |

|122 5692416   Jan/22/2019 14:47:32 N/A    cfa0:/main-cmw710-boot-e8524|

|p15.bin                                                                   |

|123 117685248 Jan/22/2019 14:47:50 N/A    cfa0:/main-cmw710-system-e85|

|24p15.bin                                                                 |

|124 7300      Jan/24/2018 08:53:08 N/A    cfa0:/0a704f6998e9602ac5203b1306|

|7b2317                                                                    |

|125 151348    Jun/05/2017 16:40:44 N/A    cfa0:/o.mdb                     |

|126 17704     Jan/31/2018 09:44:08 N/A    cfa0:/dpi.cfg                   |

|127 235207    Jan/31/2018 09:44:10 N/A    cfa0:/dpi.mdb                   |

|128 17659     Jan/31/2018 10:53:24 N/A    cfa0:/dpi1.cfg                  |

|129 231817    Jan/31/2018 10:53:26 N/A    cfa0:/dpi1.mdb                  |

|130 110592    Jan/31/2018 14:31:18 N/A    cfa0:/core/node16_dpid_202565_11|

|_20180131-143118_1517409078.core                                          |

|131 118784    Jul/24/2018 11:51:10 N/A    cfa0:/core/node16_ntopd_820_11_2|

|0180724-115110_1532433070.core                                            |

|132 118784    Dec/17/2018 08:32:20 N/A    cfa0:/core/node16_ntopd_803_11_2|

|0181217-083220_1545035540.core                                            |

|133 3249      Apr/16/2018 16:40:28 N/A    cfa0:/ngips2018041616523608292.a|

|k                                                                         |

|0   Exit                                                                  |

============================================================================

Enter file No.:  

2.      Enter the number of the file to delete. For example, enter 13 to delete the sda0:/test.cfg file.

3.      When the following message appears, enter Y.

The file you selected is sda0:/test.cfg,Delete it? [Y/N]

If the following message appears, the file is successfully deleted.

Deleting.....Done!

Restoring the factory-default configuration

To restore the factory-default configuration from the EXTENDED-BOOTWARE menu, make sure password recovery capability is disabled. If the capability is enabled, you cannot perform the task.

After you perform this task, the device uses the factory-default configuration instead of the configuration file for the next startup.

To enhance system security, disable password recovery capability.

To restore the factory-default configuration:

4.      Enter 5 in the EXTEND-BOOTWARE menu and then press Enter.

Enter your choice(0-9): 5

5.      Follow the system instruction to complete the task.

¡  If password recovery capability is enabled, first disable the capability from the CLI, and then reboot the device to access the EXTENDED-BOOTWARE menu.

Password recovery capability is enabled. To perform this operation, first disable the password recovery capability using the undo password-recovery enable command in CLI.

¡  If password recovery capability is disabled, enter Y at the prompt to complete the task.

Because the password recovery capability is disabled, this operation can cause the configuration files to be deleted, and the system will start up with factory defaults. Are you sure to continue?[Y/N]Y

Setting...Done.

Skipping the configuration file

To perform this task, make sure password recovery capability is enabled. If the capability is disabled, you cannot perform the task.

To start the device with the factory-default configuration:

6.      Enter 6 in the EXTEND-BOOTWARE menu and press Enter.

Enter your choice(0-9): 6

Flag Set Success.

7.      Follow the system instruction to complete the task.

¡  If password recovery capability is enabled, the device uses the factory-default configuration instead of the configuration file for the next startup.

¡  If password recovery capability is disabled, first enable the capability from the CLI, and then reboot the device to access the EXTENDED-BOOTWARE menu.

Password recovery capability is disabled. To perform this operation, first enable the password recovery capability using the password-recovery enable command in CLI.

Accessing the BootWare Operation submenu

Enter 7 in the EXTEND-BOOTWARE menu and press Enter.

Enter your choice(0-9): 7

=========================<BootWare Operation Menu>==========================

|Note:the operating device is sda0                                        |

|<1> Backup Full BootWare                                                  |

|<2> Restore Full BootWare                                                 |

|<3> Update BootWare By Serial                                             |

|<4> Update BootWare By Ethernet                                           |

|<0> Exit To Main Menu                                                     |

============================================================================

Enter your choice(0-4):

Table 20 BootWare Operation submenu options

Skipping console login authentication

To perform this task, make sure password recovery capability is enabled. If the capability is disabled, you cannot perform this task.

This is a one-time operation and takes effect only for the reboot after you perform this task.

To enable the device to load the next-startup configuration file with the console login password ignored:

8.      Enter 8 in the EXTEND-BOOTWARE menu and press Enter.

Enter your choice(0-9): 8

9.      Follow the system instruction to complete the task.

¡  If password recovery capability is enabled, the device clears the password for user privilege change.

Clear Image Password Success!

¡  If password recovery capability is disabled, first enable the capability from the CLI, and then reboot the device to access the EXTENDED-BOOTWARE menu.

Password recovery capability is disabled. To perform this operation, first enable the password recovery capability using the password-recovery enable command in CLI.

Managing storage media

Enter 9 in the EXTEND-BOOTWARE menu and press Enter.

Enter your choice(0-9):9

==============================<DEVICE CONTROL>==============================

|<1> Display All Available Nonvolatile Storage Device(s)                   |

|<2> Set The Operating Device                                              |

|<3> Set The Default Boot Device                                           |

|<0> Exit To Main Menu                                                     |

============================================================================

Enter your choice(0-3):

Table 21 DEVICE CONTROL menu options

Accessing the EXTEND ASSISTANT submenu

Press Ctrl+Z in the EXTEND-BOOTWARE menu.

==========================<EXTENDED ASSISTANT MENU>=========================

|<1> Display Memory                                                        |

|<2> Search Memory                                                         |

|<0> Exit To Main Menu                                                     |

============================================================================

Enter your choice(0-2):

Table 22 EXTEND ASSISTANT submenu options

Formatting the file system

Press Ctrl+F in the EXTEND-BOOTWARE menu.

Warning:All files on sda0 will be lost! Are you sure to format? [Y/N]