Contents

Managing licenses· 1

Overview· 1

License-based feature packages· 1

License types· 1

Locking methods· 1

Restrictions and guidelines· 2

General restrictions and guidelines· 2

License file safety· 2

Licenses for different device types· 3

Compressing the license storage· 3

Registering and activating a license· 3

Transferring a license· 4

Displaying and maintaining licenses· 5

Managing licenses

Overview

License-based features, such as MDC and EVI, require a license to run on your device. To use a license-based feature, you must purchase a license or obtain a free trial license.

This chapter describes how to license a feature, transfer a license between devices, remove a license, and manage the license storage space.

License-based feature packages

The following are feature packages available for the device:

·           CAMPUS—Includes the MDC feature.

·           DATACENTER—Includes the MDC and EVI features.

To use features in these packages, you must register and install the feature package licenses.

For more information about these features, see EVI Configuration Guide and Virtual Technologies Configuration Guide.

License types

The following types of licenses are available depending on validity period:

·           Permanent—A permanent license is always valid and never expires.

·           Days restricted—A license valid for a limited period in days, for example, 30 days.

Trial licenses are typically days restricted.

Locking methods

The following locking methods are available:

·           Device locked—A license can be installed only on the DID-specific device. The license takes effect on any MPU in the device even after an MPU replacement.

·           MPU locked—A license can be installed only on the DID-specific MPU. The license takes effect on the MPU even after the MPU is moved to a different device. The device supports this locking method.

Restrictions and guidelines

General restrictions and guidelines

When you manage licenses, follow the general restrictions and guidelines:

·           Make sure no one else is performing license management tasks on the MPU you are working with.

·           Manage licenses on the default MDC, and the licensed features will be licensed to the non-default MDCs automatically. Non-default MDCs do not support the license management. For information about MDCs, see Virtual Technologies Configuration Guide.

·           Trial licenses and expired formal licenses cannot be uninstalled. Expired licenses remain in the license storage area unless you compress the license storage area.

·           Licenses cannot be installed if the license storage area is not sufficient. Before registering licenses, use the display license feature command to identify the number of available licenses. Do not register licenses more than the available number.

·           When installing a license, the system also searches the storage media for a matching feature package. When it finds a matching package, it stops searching and installs the package.

·           When uninstalling a license, the system checks whether the feature package for the license is running. If it is running, the system uninstalls the package automatically.

·           After a license is activated, it takes 5 minutes for fiber ports that are bound to an IRF port to function correctly.

·           If you cannot obtain or re-register the activation file due to problems such as operating system and browser errors, contact H3C Support.

License file safety

When you manage licenses, follow these restrictions and guidelines for license file safety:

·           Save and back up the obtained activation file in case of loss.

·           If you use FTP to transfer the activation file, use the Binary mode.

·           Do not open and edit the activation file to avoid file corruption.

·           Do not modify the name of the activation file to avoid licensing error.

·           Do not delete or move files in the flash:/license directory on an MPU. The license management feature uses this directory for license management. An incorrect file operation can cause problems. For example, if you delete an activation file that is usable or in use, the related feature will not function correctly. If a file is missing or corrupted, use the copy command to copy its backup file to the directory to recover the license. If the state of the recovered license is In use but not all licensed features can function, reboot the device. To verify the license state, use the display license command.

Licenses for different device types

When you register and install licenses, follow these restrictions and guidelines:

·           Install one license for the feature on each MPU on a device. Make sure the SN and DID used for registering the feature license matches the current SN and DID of the specified MPU.

·           Make sure the licenses installed on the MPUs are the same.

·           A registered license takes effect on the MPU where it is installed, and it is effective even after the MPU is placed on another device.

Compressing the license storage

When the value for the Total field equals that of the Usage field from the output of the display license feature command, the license storage area is full. To ensure sufficient storage space for installing new licenses, compress the license storage area.

To compress the license storage:

Registering and activating a license

Make sure you have purchased a license for the first registration or an upgrade license for add-on nodes, add-on features, or time extensions.

To register and activate a license:

Transferring a license

You can transfer a license from one MPU to another if its activation file has not expired. If the activation file has expired, the license is not transferrable. Trial licenses are not transferrable either.

To transfer a license:

Displaying and maintaining licenses

Execute display commands in any view.