Title | Size | Downloads |
---|---|---|
H3C LSQ1GP12SC0 Card Manual-V1.03-book.pdf | 49.28 KB |
- Table of Contents
12-port 1000BASE-X/100BASE-FX Interface Ethernet Card–LSQ1GP12SC0
1 Card Identifier
The silkscreen LSQ1GP12SC0 is printed at the upper right corner of the front panel, and is used to identify the card.
2 Specifications
Table1 LSQ1GP12SC0 specifications
Item |
LSQ1GP12SC0 |
Connector |
LC |
Port quantity |
12 |
Interface transmission speed |
1000/100 Mbps (full duplex) |
Type of hot-swappable module |
|
Applied to |
S7500E Series Ethernet switches |
Host software version |
Release 6100 and Later |
For supported hot-swappable modules, refer to the following table.
Table2 SFP module specifications
Type |
Central wavelength |
Connector type |
Cable specifications |
Maximum transmission distance |
SFP-GE-SX-MM850-A |
850 nm |
LC |
50/125 μm multi-mode fiber |
550 m (0.34 miles) |
62.5/125 μm multi-mode fiber |
275 m (0.17 miles) |
|||
SFP-GE-LX-SM1310-A |
1310 nm |
LC |
9/125 μm single mode fiber |
10 km (6.21 miles) |
SFP-GE-LH40-SM1310 |
1310 nm |
LC |
9/125 μm single mode fiber |
40 km (24.86 miles) |
SFP-GE-LH40-SM1550 |
1550 nm |
LC |
9/125 μm single mode fiber |
40 km (24.86 miles) |
SFP-GE-LH70-SM1550 |
1550 nm |
LC |
9/125 μm single mode fiber |
70 km (43.50 miles) |
SFP-GE-LH100-SM1550 |
1550 nm |
LC |
9/125 μm single mode fiber |
100 km (62.14 miles) |
SFP-GE-T |
— |
RJ-45 |
Category-5 twisted pair cable |
100 m (0.06 miles) |
SFP-GE-LX-SM1310-BIDI |
1490 nm (receive)/1310 nm (transmit) |
LC |
9/125 μm single mode fiber |
10 km (6.21 miles) |
SFP-GE-LX-SM1490-BIDI |
1490 nm (transmit)/1310 nm (receive) |
LC |
9/125 μm single mode fiber |
10 km (6.21 miles) |
SFP-GE-LH70-SM1470-CW |
1470 nm |
LC |
9/125 μm single mode fiber |
70 km (43.50 miles) |
SFP-GE-LH70-SM1490-CW |
1490 nm |
LC |
9/125 μm single mode fiber |
70 km (43.50 miles) |
SFP-GE-LH70-SM1510-CW |
1510 nm |
LC |
9/125 μm single mode fiber |
70 km (43.50 miles) |
SFP-GE-LH70-SM1530-CW |
1530 nm |
LC |
9/125 μm single mode fiber |
70 km (43.50 miles) |
SFP-GE-LH70-SM1550-CW |
1550 nm |
LC |
9/125 μm single mode fiber |
70 km (43.50 miles) |
SFP-GE-LH70-SM1570-CW |
1570 nm |
LC |
9/125 μm single mode fiber |
70 km (43.50 miles) |
SFP-GE-LH70-SM1590-CW |
1590 nm |
LC |
9/125 μm single mode fiber |
70 km (43.50 miles) |
SFP-GE-LH70-SM1610-CW |
1610 nm |
LC |
9/125 μm single mode fiber |
70 km (43.50 miles) |
SFP-FE-SX-MM1310-A |
1310 nm |
LC |
50/125μm multi-mode fiber |
2 km (1.24 miles) |
62.5/125μm multi-mode fiber |
||||
SFP-FE-LX-SM1310-A |
1310 nm |
LC |
9/125μm single mode fiber |
15 km (9.32 miles) |
SFP-FE-LH40-SM1310 |
1310 nm |
LC |
9/125μm single mode fiber |
40 km (24.86 miles) |
SFP-FE-LH80-SM1550 |
1550 nm |
LC |
9/125μm single mode fiber |
80 km (49.71 miles) |
SFP-FE-LX-SM1310-BIDI |
1550 nm (receive)/1310 nm (transmit) |
LC |
9/125μm single mode fiber |
15 km (9.32 miles) |
SFP-FE-LX-SM1550-BIDI |
1550 nm (transmit)/1310 nm (receive) |
LC |
9/125μm single mode fiber |
15 km (9.32 miles) |
l BIDI modules use different central wavelengths in transmit and receive directions, in order to implement bidirectional transmission of optical signals over the same fiber.
l BIDI modules must be used in pair. For example, if an SFP-GE-LX-SM1310-BIDI is used at one end, an SFP-GE-LX-SM1490-BIDI must be used at the other end.
3 Obtaining More Information
For module installation, see H3C S7500E Switch Series Installation Guide.
To access the most up-to-date H3C product documentation, go to
http://www.h3c.com.hk/Technical_Documents
For software upgrade, see the release notes for the device.
To access the release notes, go to
http://www.h3c.com.hk/Software_Download
Copyright © 2007-2017 New H3C Technologies Co., Ltd.