01-Fundamentals Command Reference

HomeSupportResource CenterH3C S6520X-HI[EI][SI] & S6520-SI & S5560X-HI & S5000-EI & MS4600 Switch Series Command References-R63xx-6W10101-Fundamentals Command Reference
12-Automatic configuration commands
Title Size Download
12-Automatic configuration commands 32.36 KB

Automatic configuration commands

autodeploy udisk enable

Use autodeploy udisk enable to enable USB-based automatic configuration.

Use undo autodeploy udisk enable to disable USB-based automatic configuration.

Syntax

autodeploy udisk enable

undo autodeploy udisk enable

Default

USB-based automatic configuration is enabled.

Views

System view

Predefined user roles

network-admin

Usage guidelines

This command is supported only if the device has USB interfaces.

Examples

# Disable USB-based automatic configuration.

<Sysname> system-view

[Sysname] undo autodeploy udisk enable