说明

This software is used to upgrade the FIST SMS version

安装步骤

发布说明

Supported products

H3C UniServer B5700 G3

H3C UniServer B5800 G3

H3C UniServer B7800 G3

H3C UniServer E3200 G3

H3C UniServer R2700 G3

H3C UniServer R2900 G3

H3C UniServer R4300 G3

H3C UniServer R4500 G3

H3C UniServer R4700 G3

H3C UniServer R4900 G3

H3C UniServer R4950 G3 Naples

H3C UniServer R4950 G3 Rome

H3C UniServer R5300 G3

H3C UniServer R6700 G3

H3C UniServer R6900 G3

H3C UniServer R8900 G3

H3C UniServer B5700 G5

H3C UniServer R4300 G5

H3C UniServer R4330 G5

H3C UniServer R4330 G5 H3

H3C UniServer R4700 G5

H3C UniServer R4700LC G5

H3C UniServer R4900 G5

H3C UniServer R4900LC G5

H3C UniServer R4930 G5

H3C UniServer R4930 G5 H3

H3C UniServer R4930LC G5 H3

H3C UniServer R4950 G5 Milan

H3C UniServer R4950 G5 Rome

H3C UniServer R5300 G5

H3C UniServer R5500 G5 AMD

H3C UniServer R5500 G5 Hygon

H3C UniServer R5500 G5 Intel

H3C UniServer R5500LC G5 Hygon

H3C UniServer R5500LC G5 Intel

H3C UniServer R6900 G5

H3C UniServer B5700 G6

H3C UniServer E3300 G6

H3C UniServer R3950 G6

H3C UniServer R4300 G6

H3C UniServer R4500 G6

H3C UniServer R4700 G6

H3C UniServer R4700LE G6

H3C UniServer R4900 G6

H3C UniServer R4900 G6 Ultra

H3C UniServer R4900LE G6 Ultra

H3C UniServer R4950 G6

H3C UniServer R5300 G6

H3C UniServer R5350 G6

H3C UniServer R5500 G6 AMD

H3C UniServer R5500 G6 Intel

H3C UniServer R6700 G6

H3C UniServer R6900 G6

H3C UniServer S5639 G7

H3C UniServer S8400 G7

H3C UniServer R3350 G7

H3C UniServer R3750 G7

H3C UniServer R3900 G7

H3C UniServer R3950 G7

H3C UniServer R4300 G7

H3C UniServer R4330 G7

H3C UniServer R4370 G7

H3C UniServer R4700 G7

H3C UniServer R4900 G7

H3C UniServer R4930 G7

H3C UniServer R4950 G7

H3C UniServer R4970 G7

H3C UniServer R5300 G7

H3C UniServer R5300 G7 Ultra

H3C UniServer R5330 G7

H3C UniServer R5330 G7 Ultra

H3C UniServer R5350 G7

H3C UniServer R5350 G7 Ultra

H3C UniServer R5500 G7

H3C UniServer R5500 G7 Hygon

H3C UniServer R5500 G7 X

H3C UniServer R5500LC G7

H3C UniServer R6900 G7

Restrictions and cautions

Restrictions

Only a user with the administrator role can run FIST SMS.

FIST SMS uses port number 12580 to communicate with UniSystem. For FIST SMS to start correctly, make sure this port number is not used by any other service.

Disable the firewall feature on the server that runs FIST SMS or configure the firewall to permit traffic destined for or originated from port number 12580.

Port 6900 might be used for component update, so you must disable the firewall feature or set exceptions.

Make sure the program path of FIST SMS meets the following requirements:

The path name does not contain spacers and the following special characters: #%;&

The path name contains a maximum of 200 characters.

Cautions

Verify the hardware and software compatibility before performing an upgrade.

Version information

Version number

Version 1.89

Image file name and MD5 checksum for this version:

FIST_SMS-1.89.tar.gz: 00501117a73302c0103b14f758e7db23

Version history

Table 1 Version history

Software operating environments

Table 2 Software operating environments

Supported browsers

N/A.

Supported languages

English

Chinese

Supported device

H3C UniServer B5700 G3

H3C UniServer B5800 G3

H3C UniServer B7800 G3

H3C UniServer E3200 G3

H3C UniServer R2700 G3

H3C UniServer R2900 G3

H3C UniServer R4300 G3

H3C UniServer R4500 G3

H3C UniServer R4700 G3

H3C UniServer R4900 G3

H3C UniServer R4950 G3 Naples

H3C UniServer R4950 G3 Rome

H3C UniServer R5300 G3

H3C UniServer R6700 G3

H3C UniServer R6900 G3

H3C UniServer R8900 G3

H3C UniServer B5700 G5

H3C UniServer R4300 G5

H3C UniServer R4330 G5

H3C UniServer R4330 G5 H3

H3C UniServer R4700 G5

H3C UniServer R4700LC G5

H3C UniServer R4900 G5

H3C UniServer R4900LC G5

H3C UniServer R4930 G5

H3C UniServer R4930 G5 H3

H3C UniServer R4930LC G5 H3

H3C UniServer R4950 G5 Milan

H3C UniServer R4950 G5 Rome

H3C UniServer R5300 G5

H3C UniServer R5500 G5 AMD

H3C UniServer R5500 G5 Hygon

H3C UniServer R5500 G5 Intel

H3C UniServer R5500LC G5 Hygon

H3C UniServer R5500LC G5 Intel

H3C UniServer R6900 G5

H3C UniServer B5700 G6

H3C UniServer E3300 G6

H3C UniServer R3950 G6

H3C UniServer R4300 G6

H3C UniServer R4500 G6

H3C UniServer R4700 G6

H3C UniServer R4700LE G6

H3C UniServer R4900 G6

H3C UniServer R4900 G6 Ultra

H3C UniServer R4900LE G6 Ultra

H3C UniServer R4950 G6

H3C UniServer R5300 G6

H3C UniServer R5350 G6

H3C UniServer R5500 G6 AMD

H3C UniServer R5500 G6 Intel

H3C UniServer R6700 G6

H3C UniServer R6900 G6

H3C UniServer S5639 G7

H3C UniServer S8400 G7

H3C UniServer R3350 G7

H3C UniServer R3750 G7

H3C UniServer R3900 G7

H3C UniServer R3950 G7

H3C UniServer R4300 G7

H3C UniServer R4330 G7

H3C UniServer R4370 G7

H3C UniServer R4700 G7

H3C UniServer R4900 G7

H3C UniServer R4930 G7

H3C UniServer R4950 G7

H3C UniServer R4970 G7

H3C UniServer R5300 G7

H3C UniServer R5300 G7 Ultra

H3C UniServer R5330 G7

H3C UniServer R5330 G7 Ultra

H3C UniServer R5350 G7

H3C UniServer R5350 G7 Ultra

H3C UniServer R5500 G7

H3C UniServer R5500 G7 Hygon

H3C UniServer R5500 G7 X

H3C UniServer R5500LC G7

H3C UniServer R6900 G7

Hardware and software compatibility matrix

Table 3 Hardware and software compatibility matrix (for the H3C UniServer G3/G5/G6/G7 servers)

Upgrade recommendations

As a best practice, upgrade the software to this version.

Upgrade restrictions and guidelines

Verify the hardware and software compatibility before performing an upgrade.

解决问题

202604200127

Symptom: When you use FIST SMS to collect drive usage, the value obtained from the totalDisk field in SMS_performance.json does not match the actual drive information.

Condition: This symptom might occur if you use FIST SMS to collect drive usage.

202601281021

Symptom: FIST SMS obtains abnormal memory usage information in the RedHat 6.8/CentOS 6.9 system.

Condition: This symptom might occur if you use FIST SMS in RedHat 6.8/CentOS 6.9.

202601231222

Symptom: In a Linux environment with driver version 590.48.01, FIST SMS is unable to retrieve usage information for the Tesla T4 GPUs.

Condition: This symptom might occur in a Linux environment with driver version 590.48.01 if Tesla T4 GPUs are installed.

None.

None.

202510271590

Symptom: FIST SMS in Windows Server 2016/2019/2022 fails to obtain the server model and serial number.

Condition: This symptom might occur if you use FIST SMS in Windows Server 2016/2019/2022.

202510291966

Symptom: After you enable hyper-threading in the BIOS settings of the server, the number of processors obtained using FIST SMS in the Windows Server 2019 system does not match the actual number.

Condition: This symptom might occur if you use FIST SMS in Windows Server 2019 after enabling hyper-threading in the BIOS settings of the server.

None.

202508121062

Symptom: In Windows Server 2022, FIST SMS fails to obtain Tesla T4 GPU usage information.

Condition: This symptom might occur if FIST SMS is used to monitor GPU usage in Windows Server 2022 on the server installed with Tesla T4 GPUs.

None.

202507160819

Symptom: If you use vulnerability software to scan the system in a version earlier than FIST SMS-1.81, security vulnerability CVE-2025-48734 is detected.

Condition: This symptom might occur if you use vulnerability software to scan the system in a version earlier than FIST SMS-1.81.

None.

None.

202504170628

Symptom: When you install FIST SMS in Red Hat Enterprise Linux 9.4 (64 bit) (includes KVM) to monitor in-band server information, the system might restart with a low probability.

Condition: This symptom might occur if you install FIST SMS in Red Hat Enterprise Linux 9.4 (64 bit) (includes KVM) to monitor in-band server information.

202501230148

Symptom: After you use FIST SMS to collect sufficient drive data and enter the HDM drive capacity prediction page, no prediction data is displayed.

Condition: This symptom might occur if you use FIST SMS to collect sufficient drive data and then enter the HDM drive capacity prediction page.

202501101097

Symptom: After you use UniSystem to manage the H3C UniServer R4500 G6 installed with FIST SMS and leave the server idle for a period, FIST SMS will display as absent.

Condition: This symptom might occur if you use UniSystem to manage the H3C UniServer R4500 G6 installed with FIST SMS and leave the server idle for a period.

None.

202408161207

Symptom: If you use UniSystem to manage an R4970 G7 server installed with FIST SMS and then restart HDM, the system fails to obtain the system performance data.

Condition: This symptom might occur if you use UniSystem to incorporate an R4970 G7 server installed with FIST SMS and then restart HDM.

None.

None.

None.

None.

None.

202406121175

Symptom: XStream DoS vulnerability CVE-2022-41966 was detected through software vulnerability scanning in a version earlier than FIST SMS-1.68.

Condition: This symptom might occur if you perform software vulnerability scanning in a version earlier than FIST SMS-1.68.

None.

None.

202401230200

Symptom: Java SE security vulnerability CVE-2023-21830 was detected during software vulnerability scanning in a version earlier than FIST SMS-1.65.

Condition: This symptom might occur if you perform software vulnerability scanning in a version earlier than FIST SMS-1.65.

202401230190

Symptom: Java SE security vulnerability CVE-2023-21843 was detected during software vulnerability scanning in a version earlier than FIST SMS-1.65.

Condition: This symptom might occur if you perform software vulnerability scanning in a version earlier than FIST SMS-1.65.

None.

None.

None.

None.

None.

202303270155

Symptom: If you use UniSystem to manage FIST SMS running on a Redhat 8.4 system and view the network throughput information in UniSystem performance monitoring, the interface shows only information about network ports in running state.

Condition: This symptom might occur if you use UniSystem to manage FIST SMS running on a Redhat 8.4 system and view the network throughput information in UniSystem performance monitoring.

202307180425

Symptom: Under the Red Hat 9.0 system, if you use a version of FIST SMS prior to 1.59 and perform registered service startup, FIST SMS fails to start.

Condition: Under the Red Hat 9.0 system, if you use a version of FIST SMS prior to 1.59 and perform registered service startup.

202306251238

Symptom: When you use FIST to manage the R4950 G6 servers with FIST SMS, but have not performed any related operations for a long time, the power status will display Unknown after you refresh the server list.

Condition: This symptom might occur if you use UniSystem to manage the R4950 G6 servers with FIST SMS but have not performed any related operations for a long time.

202305111671

Symptom: If you use FIST SMS of a version earlier than 1.57 to monitor system resources, the latest time of system resource monitoring differs from the OS time, BMC time, and the BIOS time by one hour.

Condition: This symptom might occur if you use FIST SMS of a version earlier than 1.57 to monitor system resources.

None.

202303171025

Symptom: If you run FIST SMS log dumping for a long period of time, FIST SMS dumps all the history logs in case of dumping failures.

Condition: This symptom occurs if you run FIST SMS log dumping for a long period of time and dumping fails for specific log entries.

202212141398

Symptom: When the Linux system installed with FIST SMS and the hdmdrv.ko driver restarts, the hdmdrv.ko driver will not take effect. In this case, HDM will repeatedly generate the same log messages.

Condition: This symptom occurs if the Linux system installed with FIST SMS and the hdmdrv.ko driver restarts.

202211290637

Symptom: SQLite input verification error CVE-2022-35737 was detected by vulnerability scanning in a version earlier than FIST SMS-1.52.

Condition: This symptom occurs if you perform vulnerability scanning in a version earlier than FIST SMS-1.52.

202211080672

Symptom: Vulnerability CVE-2019-10086 was detected by vulnerability scanning in a version earlier than FIST SMS-1.51.

Condition: This symptom occurs if you perform vulnerability scanning in a version earlier than FIST SMS-1.51.

202211080701

Symptom: Vulnerabilities CVE-2016-1000031 and CVE-2016-3092 were detected by vulnerability scanning in a version earlier than FIST SMS-1.51

Condition: This symptom occurs if you perform vulnerability scanning in a version earlier than FIST SMS-1.51.

202211080984

Symptom: Vulnerability CVE-2020-13956 was detected by vulnerability scanning in a version earlier than FIST SMS-1.51.

Condition: This symptom occurs if you perform vulnerability scanning in a version earlier than FIST SMS-1.51.

202211080749

Symptom: When vulnerability scanning was performed in a version earlier than FIST SMS-1.51, the following vulnerabilities were detected: CVE-2019-12406, CVE-2019-12419, CVE-2019-12423, CVE-2019-17573, CVE-2020-13954, CVE-2020-1954, CVE-2021-22696, and CVE-2021-30468.

Condition: This symptom occurs if you perform vulnerability scanning in a version earlier than FIST SMS-1.51.

202211081021

Symptom: Vulnerability CVE-2017-12626 was detected by vulnerability scanning in a version earlier than FIST SMS-1.51.

Condition: This symptom occurs if you perform vulnerability scanning in a version earlier than FIST SMS-1.51.

None.

None.

None.

None.

None.

202205110408

Symptom: When you view the sellog.properties file in the FIST SMS configuration folder, no description in English is available for the file.

Condition: This symptom occurs if you view the sellog.properties file in the FIST SMS configuration folder.

None.

None.

202201181132

Symptom: The CPU, memory and drive usage lines of a FIST SMS server node are not interrupted when you view the physical resource usage information from UniSystem after the FIST SMS server node restarts.

Condition: This symptom occurs if you view the physical resource usage information of a FIST SMS server node from UniSystem after the FIST SMS server node restarts.

202112300696

Symptom: On a server with Redhat 8.2 and running FIST SMS, FIST SMS cannot record performance monitoring data after the stress exceeds the threshold during stress test on CPUs, memory, and drives.

Condition: This symptom might occur if stress test is performed on CPUs, memory, and drives on a server with Redhat 8.2 and running FIST SMS and the stress exceeds the threshold.

202112211343

Symptom: CVE-2021-4104 is found when vulnerability scanning is performed for a version earlier than FIST SMS-1.40.

Condition: This symptom occurs if vulnerability scanning is performed for a version earlier than FIST SMS-1.40.

202111091584

Symptom: If you use UniSystem to push and install the FIST SMS software of a new version to a server running FIST SMS, FIST SMS software push and installation fail.

Condition: This symptom occurs if you use UniSystem to push and install the FIST SMS software of a new version to a server running FIST SMS.

202111121112

Symptom: When you use UniSystem to incorporate a FIST SMS device running in the CAS-E0706 system, the OS information is incorrect on the server details page.

Condition: This symptom occurs if you use UniSystem to incorporate a FIST SMS device running in the CAS-E0706 system.

202111050547

Symptom: If UniSystem incorporates servers only through FIST SMS, you cannot obtain information of all devices from the server list.

Condition: This symptom occurs if UniSystem incorporates servers only through FIST SMS.

None.

202104300763

Symptom: If you use UniSystem to frequently push FIST SMS software to servers running Windows, push and installation might fail.

Condition: This symptom occurs if you use UniSystem to frequently push FIST SMS software to servers running Windows.

202108260864

Symptom: If you use UniSystem to push FIST SMS software to servers running Windows when the OpenJDK environment variables are user variables rather than system variables, the system prompts that installation fails.

Condition: This symptom occurs if you use UniSystem to push FIST SMS software to servers running Windows when the OpenJDK environment variables are user variables rather than system variables.

202107300910

Symptom: Vulnerability CVE-2021-30640 is found when vulnerability scanning is performed for a version earlier than FIST SMS-1.36.

Condition: This symptom occurs if vulnerability scanning is performed for a version earlier than FIST SMS-1.36.

None.

202105260523

Symptom: Vulnerability CVE-2021-28041 is found when vulnerability scanning is performed for a version earlier than FIST SMS-1.34.

Condition: This symptom occurs if vulnerability scanning is performed for a version earlier than FIST SMS-1.34.

202104290815

Symptom: The network field in UniSystem displays N/A after FIST SMS devices are added to UniSystem.

Condition: This symptom occurs if network port names in FIST SMS operating in the Linux operating system are in non-standard formats.

202104070376

Symptom: The information of a server in the server list disappears.

Condition: This symptom occurs if you add the server to the server list first through HDM and then through FIST SMS.

None.

202101190163

Symptom: A FIST SMS device running the Windows Server 2016 system fails to be added to UniSystem.

Condition: This symptom occurs if the FIST SMS device has been added to and then deleted from UniSystem before it is added to UniSystem again.

None.

202011190925

Symptom: The servers on the server list page are disordered.

Condition: This symptom occurs if you add multiple servers to UniSystem, bind each server to multiple labels, and then add FIST SMS devices to UniSystem.

202009281256

Symptom: The prompt message for FIST SMS upload or installation failure is incomplete.

Condition: This symptom occurs if FIST SMS fails to be uploaded or installed.

202008271400

Symptom: UniSystem displays an incorrect error message when the user attempts to add a FIST SMS server that already exists in UniSystem.

Condition: This symptom occurs if the user attempts to add a FIST SMS server that already exists in UniSystem.

202008101490

Symptom: UniSystem fails to push and install FIST SMS on a server.

Condition: This symptom occurs if the server runs Windows Server 2019 and has the openssh service installed.

202006290699

Symptom: After installing FIST SMS on a Windows server, UniSystem cannot automatically add the FIST SMS server node to its system.

Condition: None.

202006280923

Symptom: After FIST SMS is installed on a server, ports 12580 and 6900 are automatically opened in the server's firewall.

Condition: This symptom occurs if FIST SMS is installed on the server with the firewall disabled.

201911120208

Symptom: The component update module of UniSystem reports a node unavailable error during node inventory.

Condition: This symptom occurs if you re-inventory a group of FIST SMS nodes after a previous inventory failure.

First release.

新增功能