Restrictions and cautions
Usage limitations
None.
Restrictions and guidelines
If the interconnect module version or OM management software version is earlier than 1.03.09, the interconnect module cannot synchronize time settings from the NTP server if the primary NTP server configured on OM cannot be reached but the secondary NTP server is available. To resolve the issue, make sure both the interconnect module version and OM version are 1.03.09 or later.
Version information
Version number
The target file name and MD5 checksum for this version are:
OM-3.00.17.ipe: 6d1a93987b621c71f2567f458706529c
| NOTE: The version number can be viewed through the OM software Web page. Figures in this document are for illustration only. |
Figure 1 OM version
Supported browsers
Browsers below are recommended:
Chrome 58 and later versions
Supported languages
English
Chinese
Supported devices
H3C UniServer B16000
H3C UIS 9000
Hardware and software compatibility matrix
| WARNING! Before the version upgrade, check that the software and hardware conditions for this version meet the requirements in the table below. This version supporting relation is a relation of new features provided by the corresponding release version. Without new features, the version will be upgraded or downgraded normally. For the upgrade details, see "Upgrade restrictions and guidelines." |
Table 1 Compatibility matrix
Item | Specifications |
OM100 management module software | OM-3.00.17 |
Compatible software for blade server chassis OM100 network management | iom E0721P04 |
Fan software | FAN-1.00.05 and later versions |
G3 blade server node HDM software version | HDM-2.70 and later versions |
G5 blade server node HDM software version | HDM-2.70 and later versions |
G6 blade server node HDM software version | HDM2-1.66 and later versions |
B5700/B460 G5 node BIOS software | B57-BIOS-5.15 and later versions |
B7800/B780 G3 node BIOS software | B94-BIOS-2.00.39 and later versions |
B5700/B460 G3 node BIOS software | B92-BIOS-2.00.39 and later versions |
B5800/B580 G3 node BIOS software | B93-BIOS-2.00.39 and later versions |
B5700 G6 node BIOS software | B57-BIOS-6.00.34 and later versions |
BX1010E interconnect module versions | BX1010E-1.03.10 and later versions |
BX1020EF interconnect module versions | BX1020EF-1.03.10 and later versions |
BX720E, BX720EF, and BX608FE interconnect module versions | SWITCH_SYS-1.03.10 and later versions |
BX720E, BX720EF, BX608FE, BX1020EF, and BX1010E interconnect module AMC software version D40S-40SFF AMC version | SWITCH_BMC-1.03.05 and later versions |
BX1020B software version | 27.2000.3276 and later versions |
BX500S software version | 0.1.4.16 and later versions |
D40S-40SFF Expander software | 1.07 and later versions |
NOTE: Upward compatibility with new versions is supported by default without additional instructions for subsequent software version upgrades. |
ISSU upgrade type matrix
Table 2 ISSU version compatibility matrix
Current version | History version | ISSU upgrade method |
3.00.03 or later | 1.03.17 | Compatible |
1.03.14 and later versions | 1.03.10 | Compatible |
1.03.10 | 1.03.01-1.03.09 and 1.02.xx versions | Incompatible |
1.03.09 | 1.03.01-1.03.08 and 1.02.xx version | Compatible |
Version upgrade suggestions
This version is recommended.
Upgrade restrictions and guidelines
1.Understand the principles of version upgrade and make sure upgrades are compatible.
2.When you upgrade the OM management software from a version earlier than 1.00.09 to version 1.00.09 or later, you must upgrade the HDM version on the node to HDM-1.11.22P01 or later. If you do not do so, the operating system on the HDM node cannot start up correctly.
3.The OM management software supports direct upgrade. From a version earlier than 1.01.04 to version 1.01.04 or later, ISSU upgrade is not supported. You can use BOOT-LOADER to upgrade the software from the Web interface.
4.When the OM management software is upgraded from a version earlier than 1.01.xx to version 1.03.xx, ISSU upgrade is not supported. You can upgrade the OM management software to version 1.02.xx first, and then to version 1.03.xx, or use BOOT-LOADER to upgrade from the Web interface. All OM management software versions released prior to 1.03.10 do not support upgrading to 1.03.10 through ISSU.
5.If the OM management software version is 1.02.04 or later and the BX500S interconnect module version is 0.1.4.26 or later, use the NSDR method to upgrade the BX500S interconnect module from the OM Web interface, which does not interrupt service continuity. For other version combinations, use the hard reset method to upgrade the BX500S interconnect module from the Web interface, and service interruption will occur during the upgrade process.
6.The OM and interconnect modules are not recommended to cooperate across major versions. For example, OM versions 1.00.0X or 1.01.0X are not recommended to be used together with interconnect modules of version 1.02.0X, and vice versa.
7.If all firmware versions of devices in the chassis are upgraded in a unified way, make sure that the version upgrade of the OM devices is the last step of all firmware upgrade steps.
8.If the interconnect module version or OM management software version is earlier than 1.03.09, the interconnect module cannot synchronize time settings from the NTP server if the primary NTP server configured on OM cannot be reached but the secondary NTP server is available. To resolve the issue, make sure both the interconnect module version and OM version are 1.03.09 or later.
9.As from OM-3.00.13, network policy modes added support for FCoE Offload for ETH682i network adapters. If the network policy mode is non-QinQ mode, the network policy mode is non-QinQ mode and FCoE Offload after a version n earlier than OM-3.00.13 is upgraded to OM-3.00.13 or later. If the configuration of your network policy file includes the network policy file for the ETH682i network adapter, you must cold restart or shut down and start up the blade server to activate the FCoE Offload mode. If you fail to do so, you must restart the blade server twice for the configuration to take effect.
支持
售前咨询
售后咨询
人工在线咨询
