登录

欢迎user新华三退出

国家 / 地区

  • 产品与解决方案
  • 行业解决方案
  • 服务
  • 支持
  • 合作伙伴
  • 新华三人才研学中心
  • 关于我们
首页 支持 文档与软件 软件下载 服务器

HBA-16Gb-LPe31000-1P(2026/5/9)

类型：

Driver-FC HBA

版本：

14.4.726.0

操作系统：

vmware-VMware ESXi 8.0 U1 (64 bit)

    说明

  • 说明
  • 安装步骤
  • 发布说明
  • 解决问题
  • 新增功能
  • 历史版本

  • 说明

    This software is the driver for Emulex lpfc FC card VMware operating system version 14.4.726.0.

  • 安装步骤

    Restrictions and guidelines

    1.Before updating the software, as a best practice, understand the changes on the software between versions, assess the impacts of the changes on the services and read supporting materials.

    2.Known Issue: When the FCHBA card is connected to the storage via a fiber switch, restarting the fiber switch followed by a storage reboot will result in the FCHBA being unable to connect to the storage; Workaround: After restarting the fiber switch or encountering the issue where the FCHBA cannot connect to the storage, perform a disable and enable operation on the switch port connected to the host HBA.

    Installation steps

    Driver file in the VIB format

    1.On the home screen of ESXi, press F2 to access the configuration page and enter the password of the root account.

    2.Select the Troubleshooting Options menu and enable the SSH service and the ESXi Shell function.

    3.Access the Vphere web client page through the management IP address and upload the driver file to the /vmfs/volumes/datastore1 directory.

    4.On the home screen of ESXi, press Alt+F1 to enter the system command line interface and access the /vmfs/volumes/datastore1 directory (to exit the command line interface, press Alt+F2).

    5.To install the driver the first time, execute the command esxcli software vib install -v /vmfs/volumes/datastore1/xxx.vib.

    To update the driver, execute the command esxcli software vib update -v /vmfs/volumes/ datastore1/xxx.vib.

    (Note: If the driver installation prompts "could not find a trusted signer", you can add the parameter --no-sig-check after the command line)

    6.After the driver is successfully installed, reboot the system.

    7.Restart the system and use the command esxcli storage san fc list to verify the driver version of FC-HBA. If it is the target version, the new driver is installed successfully.

    Offline_bundle zip driver file

    1.On the home screen of ESXi, press F2 to access the configuration page and enter the password of the root account.

    2.Select the Troubleshooting Options menu and enable the SSH service and the ESXi Shell function.

    3.Access the Vphere web client page through the management IP address and upload the driver file to the /vmfs/volumes/datastore1 directory.

    4.On the home screen of ESXi, press Alt+F1 to enter the system command line interface and access the /vmfs/volumes/datastore1 directory (to exit the command line interface, press Alt+F2).

    5.To install the driver the first time, execute the command esxcli software vib install -d /vmfs/volumes/ datastore1/xxx_offline_bundle.zip.

    To update the driver, execute the command esxcli software vib update -d /vmfs/volumes/ datastore1 /xxx_offline_bundle.zip.

    (Note: If the driver installation prompts "could not find a trusted signer", you can add the parameter --no-sig-check after the command line)

    6.After the driver is successfully installed, reboot the system.

    7.Restart the system and use the command esxcli storage san fc list to verify the driver version of FC-HBA. If it is the target version, the new driver is installed successfully.

  • 发布说明

    Supported products

    H3C UniServer B5700 G3

    H3C UniServer B5700 G5

    H3C UniServer B5800 G3

    H3C UniServer B7800 G3

    H3C UniServer E3200 G3

    H3C UniServer R2700 G3

    H3C UniServer R2900 G3

    H3C UniServer R4300 G3

    H3C UniServer R4300 G5

    H3C UniServer R4330 G5

    H3C UniServer R4330 G5 H3

    H3C UniServer R4500 G3

    H3C UniServer R4700 G3

    H3C UniServer R4700 G5

    H3C UniServer R4700 G6

    H3C UniServer R4900 G3

    H3C UniServer R4900 G5

    H3C UniServer R4900 G6

    H3C UniServer R4900 G6 Ultra

    H3C UniServer R4930 G5

    H3C UniServer R4930 G5 H3

    H3C UniServer R4950 G5

    H3C UniServer R4950 G5 Milan

    H3C UniServer R4950 G5 Rome

    H3C UniServer R4950 G6

    H3C UniServer R5300 G3

    H3C UniServer R5300 G5

    H3C UniServer R5500 G5 AMD

    H3C UniServer R5500 G5 Intel

    H3C UniServer R6700 G3

    H3C UniServer R6900 G3

    H3C UniServer R8900 G3

    H3C UniServer R5350 G6

    H3C UniServer R6900 G5

    H3C UniServer R5500 G6 AMD

    H3C UniServer R5500 G6 Intel

    H3C UniServer R5300 G6

    H3C UniServer R5500LC G5 Intel

    H3C UniServer R5500 G5 HYGON

    H3C UniServer B5700 G6

    H3C UniServer R4900LE G6 Ultra

    H3C UniServer R4700LE G6

    H3C UniServer R4900LC G5

    H3C UniServer R4700LC G5

    H3C UniServer R4930LC G5 H3

    H3C UniServer R4300 G6

    H3C UniServer R4500 G6

    H3C UniServer R6700 G6

    H3C UniServer R6900 G6

    H3C UniServer R5330 G7

    H3C UniServer R5500 G7 Hygon

    H3C UniServer R4930 G7

    H3C UniServer E3300 G6

    H3C UniServer R3950 G6

    H3C UniServer R4330 G7

    H3C UniServer R4950 G7

    H3C UniServer R3950 G7

    H3C UniServer R3350 G7

    H3C UniServer R4900 G7

    H3C UniServer R4700 G7

    H3C UniServer R3900 G7

    H3C UniServer R4300 G7

    Restrictions and guidelines

    1.Before updating the software, as a best practice, understand the changes on the software between versions, assess the impacts of the changes on the services and read supporting materials.

    2.Known Issue: When the FCHBA card is connected to the storage via a fiber switch, restarting the fiber switch followed by a storage reboot will result in the FCHBA being unable to connect to the storage; Workaround: After restarting the fiber switch or encountering the issue where the FCHBA cannot connect to the storage, perform a disable and enable operation on the switch port connected to the host HBA.

  • 解决问题

    1.None.

  • 新增功能

    1.Modified the range of the driver parameter lpfc_hba_queue_depth to include values 2K to 256K.

    2.On an ESXi server, increased the number of supported HBA ports to 32.

    3.Support is added for the BB credit recovery feature while configuring a point-to-point topology.

新华三官网
联系我们