登录

欢迎user新华三退出

国家 / 地区

  • 产品与解决方案
  • 行业解决方案
  • 服务
  • 支持
  • 合作伙伴
  • 新华三人才研学中心
  • 关于我们
首页 支持 文档与软件 软件下载 服务器

R5300 G7 BIOS(2026/2/14)

类型：

Firmware-BIOS

版本：

7.00.24

操作系统：

N/A-N/A

    说明

  • 说明
  • 安装步骤
  • 发布说明
  • 解决问题
  • 新增功能
  • 历史版本

  • 说明

    This software is used to upgrade the BIOS version of the R5300 G7 server

  • 安装步骤

  • 发布说明

    Supported products

    H3C UniServer R5300 G7

    Restrictions and cautions

    Restrictions

    None.

    Guidelines

    To avoid BIOS boot failures, do not upgrade or reset HDM during BIOS boot.

    In BIOS-7.00.11 and later versions, the options for the PCIE Network Configuration menu cannot be properly configured and retained. This issue is resolved in BIOS-7.00.21 and later versions.

    Version information

    Version number

    Version 7.00.24

    Image file name and MD5 checksum:

    BIOS-7.00.24-signed.bin: 4854a4486982e146ed4dffe421c55ac7

    You can access the HDM Web interface of the server to identify the BIOS firmware version in the Device information section of the Dashboard page, as shown in Figure 1.

    Figure 1 Viewing the BIOS version number from HDM

    图片 237

     

    BIOS built-in software version

    Table 1 SP CPU BIOS built-in software version

    Item

    Version

    Microcode

    GNR B* Production MCU: m_95_a06d1_010003f3.inc

    GNR R1S B* Production MCU: m_20_a06d1_0a000114.inc

    SRF C* Production MCU: m_01_a06f3_03000382.inc

    Intel BKC version

    2025_WW38

    Intel RC version

    3544P80

    BIOS ACTM

    GNR V01.00.00

    SRF V01.00.00

    RSTe PreOS Components

    9.0.0.1240

    VMD VROC

    9.1.0.1139

    VROC UEFI

    9.1.2.1002

    Production BIOS ACM / Production SINIT ACM Binaries

    v1.0.8

    Seamloader version

    GNR SEAMLDR 2.0.00.20

    SRF SEAMLDR 2.0.00.20

    TDX module version

    GNR 2.0.12.00.924

    SRF 1.5.16.00.869

     

    Supported languages

    English

    Chinese

    Supported devices

    Hardware series

    PUID

    H3C UniServer R5300 G7

    R5300-G7-IA00

     

    Hardware and software compatibility matrixes

    CAUTION:

    To avoid update failure, verify the hardware and software compatibility before performing an update.

     

    Table 2 Hardware and software compatibility matrix for H3C UniServer R4300 G7

    Item

    Specifications

    Product family

    H3C UniServer R4300 G7

    HDM

    HDM3-2.13.02 and later

    CPLD

    V003 and later

    iMC

    N/A

     

    Table 3 Hardware and software compatibility matrix for H3C UniServer R4700 G7/R4900 G7

    Item

    Specifications

    Product family

    H3C UniServer R4700 G7/R4900 G7

    HDM

    HDM3-2.13.02 and later

    CPLD

    V003 and later

    iMC

    N/A

     

    Table 4 Hardware and software compatibility matrix for H3C UniServer R5300 G7

    Item

    Specifications

    Product family

    H3C UniServer R5500 G7 Intel

    HDM

    HDM3-3.03.01 and later

    CPLD

    V001 and later

    iMC

    iom E7401

     

    Update suggestions

    This version is optional.

    Update restrictions and guidelines

    Make sure the software versions are compatible with each other.

    To update both HDM and the BIOS, update HDM first.

    Make sure the server is running in stable state before the update. That is, the server is powered off or has entered the operating system.

    If the server enters the OS before the update, you must power cycle the server for the new firmware to take effect.

    If you select the Retain or Restore method to update the BIOS, the update occurs during POST after the server is powered on again. During the update, do not disconnect the power source from the server, or forcedly power off or restart the server.

    If you select the Forcedly restore method to update the BIOS, do not disconnect the power source from the server, or power off or restart the server.

    Selecting the Restore or Forcedly restore method will restore the default BIOS settings, including restoring the boot mode in the BIOS to the default (UEFI).

    During BIOS update with Forcedly restore selected, writing BIOS data, such as restarting the system or saving BIOS configuration from the BIOS setup utility, can cause data write errors. This can lead to BIOS ROM integrity check failures and even system starting failures. If the system prompts Flash Image Broken! System Halt!, forcedly power off the server, and then try to update the BIOS with Forcedly restore selected again.

    As a best practice of bulk update, make sure you can update one server successfully before you update the remaining servers.

  • 解决问题

    Resolved problems in BIOS-7.00.24

    202601090877

    Symptom: After you install a GPU on the server, the GPU details interface in the BIOS Setup Utility only displays the BDF and does not show the Segment information.

    Condition: This symptom might occur if you view GPU details in the BIOS Setup Utility after a GPU is installed on the server.

    202601130514

    Symptom: The default value of the OOB RAS Support option cannot be modified from the HDM interface.

    Condition: This symptom might occur if you attempt to modify the default value of the OOB RAS Support option from the HDM interface.

  • 新增功能

新华三官网
联系我们