- 产品与解决方案
- 行业解决方案
- 服务
- 支持
- 合作伙伴
- 新华三人才研学中心
- 关于我们
book
本章节下载 (292.89 KB)
H3C SOHO Switch System Trap Messages
Abstract: This document describes the system trap messages.
|
Copyright © 2017 New H3C Technologies Co., Ltd. All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of New H3C Technologies Co., Ltd. The information in this document is subject to change without notice. |
|
pethMainPowerUsageOnNotification
pethMainPowerUsageOffNotification
hh3cSysClockChangedNotification
hh3cEntityExtCpuUsageThresholdNotfication
hh3cEntityExtMemUsageThresholdNotification
hh3cEntityExtCriticalTemperatureThresholdNotification
hh3cArpPortDynamicEntryFullTrap
hh3cAggPortInactiveNotification
hh3cAggPortInactiveNotification2
This document describes all trap messages which are supported by H3C SOHO Switches.
This publication is designed for the installer and user with a working knowledge of the Comware V5 system software. Users of this publication might also include network administrators and other people responsible for setting up and maintaining these switches.
The sections of this document are as follows:
|
Chapter |
Title |
Description |
|
1 |
Public Traps |
Describe all trap messages in public MIB modules supported by H3C SOHO Switches. |
|
2 |
Private Traps |
Describe all trap messages in private MIB modules supported by H3C SOHO Switches. |
List all the traps mentioned in this documents:
|
Trap Name |
MIB Module |
MIB File |
Description |
|
coldStart |
SNMPv2-MIB |
rfc1450-snmpv2.mib |
- |
|
warmStart |
SNMPv2-MIB |
rfc1450-snmpv2.mib |
- |
|
linkDown |
IF-MIB |
rfc2233-if.mib |
- |
|
linkUp |
IF-MIB |
rfc2233-if.mib |
- |
|
authenticationFailure |
SNMPv2-MIB |
rfc1450-snmpv2.mib |
- |
|
ipv6IfStateChange |
IPV6-MIB |
rfc2465-ipv6.mib |
- |
|
ospfVirtIfStateChange(1.3.6.1.2.1.14.16.2.1) |
OSPF-MIB |
rfc1850-ospf.mib |
As per MIB |
|
ospfNbrStateChange(1.3.6.1.2.1.14.16.2.2) |
OSPF-MIB |
rfc1850-ospf.mib |
As per MIB |
|
ospfVirtNbrStateChange(1.3.6.1.2.1.14.16.2.3) |
OSPF-MIB |
rfc1850-ospf.mib |
As per MIB |
|
ospfIfConfigError(1.3.6.1.2.1.14.16.2.4) |
OSPF-MIB |
rfc1850-ospf.mib |
As per MIB |
|
ospfVirtIfConfigError(1.3.6.1.2.1.14.16.2.5) |
OSPF-MIB |
rfc1850-ospf.mib |
As per MIB |
|
ospfIfAuthFailure(1.3.6.1.2.1.14.16.2.6) |
OSPF-MIB |
rfc1850-ospf.mib |
As per MIB |
|
ospfVirtIfAuthFailure(1.3.6.1.2.1.14.16.2.7) |
OSPF-MIB |
rfc1850-ospf.mib |
As per MIB |
|
ospfIfRxBadPacket(1.3.6.1.2.1.14.16.2.8) |
OSPF-MIB |
rfc1850-ospf.mib |
As per MIB |
|
ospfVirtIfRxBadPacket(1.3.6.1.2.1.14.16.2.9) |
OSPF-MIB |
rfc1850-ospf.mib |
As per MIB |
|
ospfTxRetransmit(1.3.6.1.2.1.14.16.2.10) |
OSPF-MIB |
rfc1850-ospf.mib |
As per MIB |
|
ospfVirtIfTxRetransmit(1.3.6.1.2.1.14.16.2.11) |
OSPF-MIB |
rfc1850-ospf.mib |
As per MIB |
|
ospfOriginateLsa(1.3.6.1.2.1.14.16.2.12) |
OSPF-MIB |
rfc1850-ospf.mib |
As per MIB |
|
ospfMaxAgeLsa(1.3.6.1.2.1.14.16.2.13) |
OSPF-MIB |
rfc1850-ospf.mib |
As per MIB |
|
ospfLsdbOverflow(1.3.6.1.2.1.14.16.2.14) |
OSPF-MIB |
rfc1850-ospf.mib |
As per MIB |
|
ospfLsdbApproachingOverflow(1.3.6.1.2.1.14.16.2.15) |
OSPF-MIB |
rfc1850-ospf.mib |
As per MIB |
|
ospfIfStateChange(1.3.6.1.2.1.14.16.2.16) |
OSPF-MIB |
rfc1850-ospf.mib |
As per MIB |
|
risingAlarm |
RMON-MIB |
rfc2819-rmon.mib |
- |
|
fallingAlarm |
RMON-MIB |
rfc2819-rmon.mib |
- |
|
pingProbeFailed |
DISMAN-PING-MIB |
rfc2925-disman-ping.mib |
- |
|
pingTestFailed |
DISMAN-PING-MIB |
rfc2925-disman-ping.mib |
- |
|
pingTestCompleted |
DISMAN-PING-MIB |
rfc2925-disman-ping.mib |
- |
|
pethPsePortOnOffNotification |
POWER-ETHERNET-MIB |
rfc3621-power-ethernet.mib |
- |
|
pethMainPowerUsageOnNotification |
POWER-ETHERNET-MIB |
rfc3621-power-ethernet.mib |
- |
|
pethMainPowerUsageOffNotification |
POWER-ETHERNET-MIB |
rfc3621-power-ethernet.mib |
- |
|
lldpRemTablesChange(1.0.8802.1.1.2.0.0.1) |
LLDP-MIB |
lldp.mib |
- |
|
Trap Name |
MIB Module |
MIB File |
Description |
|
hh3cLogIn |
HH3C-UI-MAN-MIB |
hh3c-ui-man.mib |
- |
|
hh3cLogOut |
HH3C-UI-MAN-MIB |
hh3c-ui-man.mib |
- |
|
hh3cLogInAuthenFailure |
HH3C-UI-MAN-MIB |
hh3c-ui-man.mib |
- |
|
hh3cSysClockChangedNotification |
HH3C-SYS-MAN-MIB |
hh3c-sys-man.mib |
- |
|
hh3cSysReloadNotification |
HH3C-SYS-MAN-MIB |
hh3c-sys-man.mib |
- |
|
hh3cCfgManEventlog |
HH3C-CONFIG-MAN-MIB |
hh3c-config-man.mib |
- |
|
hh3cCfgOperateCompletion |
HH3C-CONFIG-MAN-MIB |
hh3c-config-man.mib |
- |
|
hh3cFlhOperNotification |
HH3C-FLASH-MAN-MIB |
hh3c-flash-man.mib |
- |
|
hh3cEntityExtCpuUsageThresholdNotfication |
HH3C-ENTITY-EXT-MIB |
hh3c-entity-ext.mib |
- |
|
hh3cEntityExtMemUsageThresholdNotification |
HH3C-ENTITY-EXT-MIB |
hh3c-entity-ext.mib |
- |
|
hh3cEntityExtCriticalTemperatureThresholdNotification |
HH3C-ENTITY-EXT-MIB |
hh3c-entity-ext.mib |
- |
|
hh3cMacTabFullTrap |
HH3C-TRAP-MIB |
hh3c-trap.mib |
- |
|
hh3cMacTabAlmostFullTrap |
HH3C-TRAP-MIB |
hh3c-trap.mib |
- |
|
hh3cArpTabFullTrap |
HH3C-TRAP-MIB |
hh3c-trap.mib |
- |
|
hh3cStormRising |
HH3C-STORM-CONSTRAIN-MIB |
hh3c-storm-constrain.mib |
- |
|
hh3cStormFalling |
HH3C-STORM-CONSTRAIN-MIB |
hh3c-storm-constrain.mib |
- |
|
hh3cRebootSendTrap |
HH3C-COMMON-SYSTEM-MIB |
hh3c-common-system.mib |
- |
|
hh3cpririsingAlarm |
HH3C-RMON-EXT-MIB |
hh3c-rmon-ext.mib |
- |
|
hh3cprifallingAlarm |
HH3C-RMON-EXT-MIB |
hh3c-rmon-ext.mib |
- |
|
hh3cfanfailure |
HH3C-LswTRAP-MIB |
hh3c-splat-trap.mib |
- |
|
hh3cFanNormal |
HH3C-LswTRAP-MIB |
hh3c-splat-trap.mib |
- |
|
hh3cPortMstiStateForwarding(1.3.6.1.4.1.25506.8.35.14.0.1) |
HH3C-LswMSTP-MIB |
hh3c-splat-mstp.mib |
As per MIB |
|
hh3cPortMstiStateForwarding(1.3.6.1.4.1.25506.8.35.14.0.1) |
HH3C-LswMSTP-MIB |
hh3c-splat-mstp.mib |
As per MIB |
|
hh3cPortMstiStateDiscarding(1.3.6.1.4.1.25506.8.35.14.0.2) |
HH3C-LswMSTP-MIB |
hh3c-splat-mstp.mib |
As per MIB |
|
hh3cBridgeLostRootPrimary(1.3.6.1.4.1.25506.8.35.14.0.3) |
HH3C-LswMSTP-MIB |
hh3c-splat-mstp.mib |
As per MIB |
|
hh3cPortMstiRootGuarded(1.3.6.1.4.1.25506.8.35.14.0.4) |
HH3C-LswMSTP-MIB |
hh3c-splat-mstp.mib |
As per MIB |
|
hh3cPortMstiBpduGuarded(1.3.6.1.4.1.25506.8.35.14.0.5) |
HH3C-LswMSTP-MIB |
hh3c-splat-mstp.mib |
As per MIB |
|
hh3cPortMstiLoopGuarded(1.3.6.1.4.1.25506.8.35.14.0.6) |
HH3C-LswMSTP-MIB |
hh3c-splat-mstp.mib |
As per MIB |
|
hh3cAggPortInactiveNotification(1.3.6.1.4.1.25506.8.25.2.2) |
HH3C-LAG-MIB |
hh3c-lag.mib |
As per MIB |
|
hh3cAggPortInactiveNotification2(1.3.6.1.4.1.25506.8.25.2.3) |
HH3C-LAG-MIB |
hh3c-lag.mib |
As per MIB |
|
hh3cAggPortActiveNotification(1.3.6.1.4.1.25506.8.25.2.4) |
HH3C-LAG-MIB |
hh3c-lag.mib |
As per MIB |
|
hh3csupplicantproxycheck |
HH3C-8021PAE-MIB |
hh3c-8021x-ext.mib |
As per MIB |
|
hh3chgmpMemberfailure |
HH3C-HGMP-MIB |
hh3c-hgmp.mib |
As per MIB |
|
hh3chgmpMemberRecover |
HH3C-HGMP-MIB |
hh3c-hgmp.mib |
As per MIB |
|
hh3chgmpMemberStatusChange |
HH3C-HGMP-MIB |
hh3c-hgmp.mib |
As per MIB |
|
hh3chgmpNetTopChange |
HH3C-HGMP-MIB |
hh3c-hgmp.mib |
As per MIB |
|
hh3cPoEFanErrorNotification |
HH3C-POWER-ETH-EXT-MIB |
hh3c-power-eth-ext.mib |
- |
OID of this trap is:
1.3.6.1.6.3.1.1.5.1
Module of MIB:
SNMPv2-MIB
MIB file:
rfc1450-snmpv2.mib
Description:
A coldStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself and that its configuration may have been altered.
|
Object Name |
Object Type |
Object Value Scope |
|
N/A |
N/A |
N/A |
Trigger Action:
Reinitializing SNMPv2 entity and its configuration may have been altered.
Recommended Action:
No action is required.
OID of this trap is:
1.3.6.1.6.3.1.1.5.2
Module of MIB:
SNMPv2-MIB
MIB file:
rfc1450-snmpv2.mib
Description:
A warmStart trap signifies that the SNMPv2 entity, acting in an agent role, is reinitializing itself such that its configuration is unaltered.
|
Object Name |
Object Type |
Object Value Scope |
|
N/A |
N/A |
N/A |
Trigger Action:
Reinitializing SNMPv2 entity and its configuration is unaltered.
Recommended Action:
No action is required.
OID of this trap is:
1.3.6.1.6.3.1.1.5.3
Module of MIB:
IF-MIB
MIB file:
rfc2233-if.mib
Description:
A linkDown trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links is about to enter the down state from some other state (but not from the notPresent state). This other state is indicated by the included value of ifOperStatus.
|
Object Name |
Object Type |
Object Value Scope |
|
ifIndex (1.3.6.1.2.1.2.2.1.1) |
Integer32 |
1..2147483647 |
|
ifAdminStatus (1.3.6.1.2.1.2.2.1.7) |
INTEGER |
up(1), down(2), testing(3) |
|
ifOperStatus (1.3.6.1.2.1.2.2.1.8) |
INTEGER |
up(1), down(2), testing(3), unknown(4), dormant(5), notPresent(6), lowerLayerDown(7) |
Trigger Action:
Change the status of protocol on an interface.
Recommended Action:
Shutdown or undo shutdown.
OID of this trap is:
1.3.6.1.6.3.1.1.5.4
Module of MIB:
IF-MIB
MIB file:
rfc2233-if.mib
Description:
A linkDown trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links left the down state and transitioned into some other state (but not into the notPresent state). This other state is indicated by the included value of ifOperStatus.
|
Object Name |
Object Type |
Object Value Scope |
|
ifIndex (1.3.6.1.2.1.2.2.1.1) |
Integer32 |
1..2147483647 |
|
ifAdminStatus (1.3.6.1.2.1.2.2.1.7) |
INTEGER |
up(1), down(2), testing(3) |
|
ifOperStatus (1.3.6.1.2.1.2.2.1.8) |
INTEGER |
up(1), down(2), testing(3), unknown(4), dormant(5), notPresent(6), lowerLayerDown(7) |
Trigger Action:
Change the status of protocol on an interface.
Recommended Action:
Shutdown or undo shutdown.
OID of this trap is:
1.3.6.1.6.3.1.1.5.5
Module of MIB:
SNMPv2-MIB
MIB file:
rfc1450-snmpv2.mib
Description:
An authenticationFailure trap signifies that the SNMPv2 entity, acting in an agent role, has received a protocol message that is not properly authenticated. While all implementations of the SNMPv2 must be capable of generating this trap, the snmpEnableAuthenTraps object indicates whether this trap will be generated.
|
Object Name |
Object Type |
Object Value Scope |
|
N/A |
N/A |
N/A |
Trigger Action:
Received a protocol message that is not properly authenticated
Recommended Action:
No action is required.
OID of this trap is:
1.3.6.1.2.1.55.2.0.1
Module of MIB:
IPV6-MIB
MIB file:
rfc2465-ipv6.mib
Description:
An ipv6IfStateChange notification signifies that there has been a change in the state of an ipv6 interface. This notification should be generated when the interface's operational status transitions to or from the up (1) state.
|
Object Name |
Object Type |
Object Value Scope |
|
ipv6IfDescr (1.3.6.1.2.1.55.1.5.1.2) |
DisplayString |
OCTET STRING (0..255) |
|
ipv6IfOperStatus (1.3.6.1.2.1.55.1.5.1.10) |
INTEGER |
up(1), down(2) |
Trigger Action:
The reasons why the IPv6 Up alarm is generated are as follows:
· The interface is configured to be UP on the command line.
· Hardware failure in the interface is recovered.
· Failure of interface on the peer is recovered.
· Protocols have detected conditions that allow the interface to be UP.
The reasons why the IPv6 Down alarm is generated are as follows:
· The interface is configured to be DOWN on the command line. For example, the command of shutdown is executed on the interface.
· Hardware of the interface failed. For example, a network line is disconnected.
· Interface on the peer failed.
· Protocols cause the port to be DOWN. For example, there is loopback or broadcast storm on the interface.
Recommended Action:
There is no suggestion to recovery IPv6 Up alarm.
According to the reasons of IPv6 Down alarm generation, the suggestions to recovery are as follows:
· If the interface is configured to be DOWN on the command line, it can be recovered by configuring the command of undo shutdown on the interface;
· If the hardware of the interface has a failure, replace the hardware;
· If the interface on the peer has a failure, troubleshoot on that interface;
· If it is protocols that cause the interface to be DOWN, troubleshoot in the network. For example, remove loopback.
OID of this trap is:
1.3.6.1.2.1.14.16.2.1
Module of MIB:
OSPF-MIB
MIB file:
rfc1850-ospf.mib
Description:
An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual interface. This trap should be generated when the interface state regresses (e.g., goes from Point-to-Point to Down) or progresses to a terminal state (i.e., Point-to-Point).
|
Object Name |
Object Type |
Object Value Scope |
|
ospfRouterId (1.3.6.1.2.1.14.1.1) |
RouterID |
IpAddress |
|
ospfVirtIfAreaId (1.3.6.1.2.1.14.9.1.1) |
AreaID |
IpAddress |
|
ospfVirtIfNeighbor (1.3.6.1.2.1.14.9.1.2) |
RouterID |
IpAddress |
Trigger Action:
The interface state regresses (e.g., goes from Point-to-Point to Down) or progresses to a terminal state (i.e., Point-to-Point).
Recommended Action:
No recovery is required for normal state change of OSPF interface.
For abnormal state change, If the interfaces enabled in transit area are configured to be DOWN on the command line, you can restore it by configuring the command of undo shutdown on the interface. If the hardware of the interface failed, please replace it. If the interfaces of virlual neighbor failed, you should troubleshoot on neighbor router. If the virlual neighbor is not configured vlink peer successfully ,you should configure it correctly. If there is no abr route to virtual neighbor, you should check configuration of transit area.
OID of this trap is:
1.3.6.1.2.1.14.16.2.2
Module of MIB:
OSPF-MIB
MIB file:
rfc1850-ospf.mib
Description:
An ospfNbrStateChange trap signifies that there has been a change in the state of a non-virtual OSPF neighbor.This trap should be generated when the neighbor state regresses(e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g.,2-Way or Full).When an neighbor transitions from or to Full on non-broadcast multi-access and broadcast networks, the trap should be gen-erated by the designated router.A designated router transitioning to Down will be noted by ospfIfStateChange.
|
Object Name |
Object Type |
Object Value Scope |
|
ospfRouterId (1.3.6.1.2.1.14.1.1) |
RouterID |
IpAddress |
|
ospfNbrIpAddr (1.3.6.1.2.1.14.10.1.1) |
IpAddress |
- |
|
ospfNbrAddressLessIndex (1.3.6.1.2.1.14.10.1.2) |
InterfaceIndex |
Integer32 |
|
ospfNbrRtrId (1.3.6.1.2.1.14.10.1.3) |
RouterID |
IpAddress |
|
ospfNbrState (1.3.6.1.2.1.14.10.1.6) |
INTEGER |
down(1), attempt(2), init(3), twoWay(4), exchangeStart(5), exchange(6), loading(7), full (8) |
Trigger Action:
The neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., 2-Way or Full). When an neighbor transitions from or to Full on non-broadcast multi-access and broadcast networks, the trap should be generated by the designated router.
Recommended Action:
If the OSPF neighbor relationship is established normally, no alarm recovery needs to be performed;
If the state of OSPF neighbor transitions from higher to lower, you should check links for abnormal state. If there is no abnormity, check if the peer neighbor is sending Hello packet normally.
OID of this trap is:
1.3.6.1.2.1.14.16.2.3
Module of MIB:
OSPF-MIB
MIB file:
rfc1850-ospf.mib
Description:
An ospfIfStateChange trap signifies that there has been a change in the state of an OSPF vir-tual neighbor.This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., Full).
|
Object Name |
Object Type |
Object Value Scope |
|
ospfRouterId (1.3.6.1.2.1.14.1.1) |
RouterID |
IpAddress |
|
ospfVirtNbrArea (1.3.6.1.2.1.14.11.1.1) |
AreaID |
IpAddress |
|
ospfVirtNbrRtrId (1.3.6.1.2.1.14.11.1.2) |
RouterID |
IpAddress |
|
ospfVirtNbrState (1.3.6.1.2.1.14.11.1.5) |
INTEGER |
down(1), attempt(2), init(3), twoWay(4), exchangeStart(5), exchange(6), loading(7), full (8) |
Trigger Action:
The neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., Full).
Recommended Action:
If the OSPF neighbor relationship is established normally, no alarm recovery needs to be performed;
If the state of OSPF neighbor transitions from higher to lower, you should check links for abnormal state. If there is no abnormity, you should check whether the configuration of “vlink peer” of neighbor is right . If there is no abnormity, check if the peer neighbor is sending packets normally.
OID of this trap is:
1.3.6.1.2.1.14.16.2.4
Module of MIB:
OSPF-MIB
MIB file:
rfc1850-ospf.mib
Description:
An ospfIfConfigError trap signifies that a packet has been received on a non-virtual interface from a router whose configuration parameters conflict with this router's configuration parameters.Note that the event op-tionMismatch should cause a trap only if it prevents an adjacency from forming.
|
Object Name |
Object Type |
Object Value Scope |
|
ospfRouterId (1.3.6.1.2.1.14.1.1) |
RouterID |
IpAddress |
|
ospfIfIpAddress (1.3.6.1.2.1.14.7.1.1) |
IpAddress |
- |
|
ospfAddressLessIf (1.3.6.1.2.1.14.7.1.2) |
Integer32 |
- |
|
ospfPacketSrc (1.3.6.1.2.1.14.16.1.4) |
IpAddress |
- |
|
ospfConfigErrorType (1.3.6.1.2.1.14.16.1.2) |
INTEGER |
badVersion (1), areaMismatch (2), unknownNbmaNbr (3), unknownVirtualNbr (4), authTypeMismatch (5), authFailure (6), netMaskMismatch (7), helloIntervalMismatch (8), deadIntervalMismatch (9), optionMismatch (10) |
|
ospfPacketType (1.3.6.1.2.1.14.16.1.3) |
INTEGER |
hello (1), dbDescript (2), lsReq (3), lsUpdate (4), lsAck (5) |
Trigger Action:
A packet has been received on a non-virtual interface from a router whose configuration parameters conflict with this router's configuration parameters. Note that the event optionMismatch should cause a trap only if it prevents an adjacency from forming.
Recommended Action:
You should check whether the configurations are correct. Note that configurations on the two ends need to be consistent.
OID of this trap is:
1.3.6.1.2.1.14.16.2.5
Module of MIB:
OSPF-MIB
MIB file:
rfc1850-ospf.mib
Description:
An ospfConfigError trap signifies that a packet has been received on a virtual interface from a router whose configuration parameters conflict with this router’s configuration parameters.Note that the event optionMismatch should cause a trap only if it prevents an ad-jacency from forming.
|
Object Name |
Object Type |
Object Value Scope |
|
ospfRouterId (1.3.6.1.2.1.14.1.1) |
RouterID |
IpAddress |
|
ospfVirtIfAreaId (1.3.6.1.2.1.14.9.1.1) |
AreaID |
IpAddress |
|
ospfVirtIfNeighbor (1.3.6.1.2.1.14.9.1.2) |
RouterID |
IpAddress |
|
ospfConfigErrorType (1.3.6.1.2.1.14.16.1.2) |
INTEGER |
badVersion (1), areaMismatch (2), unknownNbmaNbr (3), unknownVirtualNbr (4), authTypeMismatch (5), authFailure (6), netMaskMismatch (7), helloIntervalMismatch (8), deadIntervalMismatch (9), optionMismatch (10) |
|
ospfPacketType (1.3.6.1.2.1.14.16.1.3) |
INTEGER |
hello(1), dbDescript (2), lsReq (3), lsUpdate (4), lsAck (5) |
Trigger Action:
A packet has been received on a virtual interface from a router whose configuration parameters conflict with this router's configuration parameters. Note that the event optionMismatch should cause a trap only if it prevents an adjacency from forming.
Recommended Action:
You should check whether the configurations are correct. Note that configurations on the two ends need to be consistent.
OID of this trap is:
1.3.6.1.2.1.14.16.2.6
Module of MIB:
OSPF-MIB
MIB file:
rfc1850-ospf.mib
Description:
An ospfIfAuthFailure trap signifies that a packet has been received on a non-virtual in-terface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type.
|
Object Name |
Object Type |
Object Value Scope |
|
ospfRouterId (1.3.6.1.2.1.14.1.1) |
RouterID |
IpAddress |
|
ospfIfIpAddress (1.3.6.1.2.1.14.7.1.1) |
IpAddress |
- |
|
ospfAddressLessIf (1.3.6.1.2.1.14.7.1.2) |
Integer32 |
- |
|
ospfPacketSrc (1.3.6.1.2.1.14.16.1.4) |
IpAddress |
- |
|
ospfConfigErrorType (1.3.6.1.2.1.14.16.1.2) |
INTEGER |
badVersion(1), areaMismatch(2), unknownNbmaNbr(3), unknownVirtualNbr(4), authTypeMismatch(5), authFailure (6), netMaskMismatch(7), helloIntervalMismatch(8), deadIntervalMismatch(9), optionMismatch(10) |
|
ospfPacketType (1.3.6.1.2.1.14.16.1.3) |
INTEGER |
hello(1), dbDescript(2), lsReq(3), lsUpdate(4), lsAck(5) |
Trigger Action:
A packet has been received on a non-virtual interface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type.
Recommended Action:
Check the authentication type and password configured on the two ends, and make sure they are consistent.
OID of this trap is:
1.3.6.1.2.1.14.16.2.7
Module of MIB:
OSPF-MIB
MIB file:
rfc1850-ospf.mib
Description:
An ospfVirtIfAuthFailure trap signifies that a packet has been received on a virtual interface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type.
|
Object Name |
Object Type |
Object Value Scope |
|
ospfRouterId (1.3.6.1.2.1.14.1.1) |
RouterID |
IpAddress |
|
ospfVirtIfAreaId (1.3.6.1.2.1.14.9.1.1) |
AreaID |
IpAddress |
|
ospfVirtIfNeighbor (1.3.6.1.2.1.14.9.1.2) |
RouterID |
IpAddress |
|
ospfConfigErrorType (1.3.6.1.2.1.14.16.1.2) |
INTEGER |
badVersion (1), areaMismatch (2), unknownNbmaNbr (3), unknownVirtualNbr (4), authTypeMismatch (5), authFailure (6), netMaskMismatch (7), helloIntervalMismatch (8), deadIntervalMismatch (9), optionMismatch (10) |
|
ospfPacketType (1.3.6.1.2.1.14.16.1.3) |
INTEGER |
hello(1), dbDescript(2), lsReq(3), lsUpdate(4), lsAck(5) |
Trigger Action:
A packet has been received on a virtual interface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type.
Recommended Action:
Check the authentication type and password configured on the two ends, and make sure they are consistent.
OID of this trap is:
1.3.6.1.2.1.14.16.2.8
Module of MIB:
OSPF-MIB
MIB file:
rfc1850-ospf.mib
Description:
An ospfIfRxBadPacket trap signifies that an OSPF packet has been received on a non-virtual interface that cannot be parsed.
|
Object Name |
Object Type |
Object Value Scope |
|
ospfRouterId (1.3.6.1.2.1.14.1.1) |
RouterID |
IpAddress |
|
ospfIfIpAddress (1.3.6.1.2.1.14.7.1.1) |
IpAddress |
IpAddress |
|
ospfAddressLessIf (1.3.6.1.2.1.14.7.1.2) |
Integer32 |
- |
|
ospfPacketSrc (1.3.6.1.2.1.14.16.1.4) |
IpAddress |
IpAddress |
|
ospfPacketType (1.3.6.1.2.1.14.16.1.3) |
INTEGER |
hello(1), dbDescript(2), lsReq(3), lsUpdate(4), lsAck(5) |
Trigger Action:
An OSPF packet has been received on a non-virtual interface that cannot be parsed.
Recommended Action:
Check whether the configurations of corresponding neighbors on the interface are correct, or whether there is any attack packet.
OID of this trap is:
1.3.6.1.2.1.14.16.2.9
Module of MIB:
OSPF-MIB
MIB file:
rfc1850-ospf.mib
Description:
An ospfRxBadPacket trap signifies that an OSPF packet has been received on a virtual interface that cannot be parsed.
|
Object Name |
Object Type |
Object Value Scope |
|
ospfRouterId (1.3.6.1.2.1.14.1.1) |
RouterID |
IpAddress |
|
ospfVirtIfAreaId (1.3.6.1.2.1.14.9.1.1) |
AreaID |
IpAddress |
|
ospfVirtIfNeighbor (1.3.6.1.2.1.14.9.1.2) |
RouterID |
IpAddress |
|
ospfPacketType (1.3.6.1.2.1.14.16.1.3) |
INTEGER |
hello(1), dbDescript(2), lsReq(3), lsUpdate(4), lsAck(5) |
Trigger Action:
An OSPF packet has been received on a virtual interface that cannot be parsed.
Recommended Action:
Check whether the configurations of corresponding neighbors on the interface are correct, or whether there is any attack packet.
OID of this trap is:
1.3.6.1.2.1.14.16.2.10
Module of MIB:
OSPF-MIB
MIB file:
rfc1850-ospf.mib
Description:
An ospfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a non-virtual interface. All packets that may be re-transmitted are associated with an LSDB entry. The LS type, LS ID, and Router ID are used to identify the LSDB entry.
|
Object Name |
Object Type |
Object Value Scope |
|
ospfRouterId (1.3.6.1.2.1.14.1.1) |
RouterID |
IpAddress |
|
ospfIfIpAddress (1.3.6.1.2.1.14.7.1.1) |
IpAddress |
- |
|
ospfAddressLessIf (1.3.6.1.2.1.14.7.1.2) |
Integer32 |
- |
|
ospfNbrRtrId (1.3.6.1.2.1.14.10.1.3) |
RouterID |
IpAddress |
|
ospfPacketType (1.3.6.1.2.1.14.16.1.3) |
INTEGER |
hello(1), dbDescript(2), lsReq(3), lsUpdate(4), lsAck(5) |
|
ospfLsdbType (1.3.6.1.2.1.14.4.1.2) |
INTEGER |
routerLink(1), networkLink(2), summaryLink(3), asSummaryLink(4), asExternalLink(5), multicastLink(6), nssaExternalLink(7) |
|
ospfLsdbLsid (1.3.6.1.2.1.14.4.1.3) |
IpAddress |
- |
|
ospfLsdbRouterId (1.3.6.1.2.1.14.4.1.4) |
RouterID |
IpAddress |
Trigger Action:
An OSPF packet has been retransmitted on a non-virtual interface.
Recommended Action:
The loss of packet because of the size and transmitting quality of network，remove congestion of network to improve transmitting quality of network.
OID of this trap is:
1.3.6.1.2.1.14.16.2.11
Module of MIB:
OSPF-MIB
MIB file:
rfc1850-ospf.mib
Description:
An ospfTxRetransmit trap signifies than an OSPF packet has been retransmitted on a virtual interface. All packets that may be retransmit-ted are associated with an LSDB entry. The LS type, LS ID, and Router ID are used to identify the LSDB entry.
|
Object Name |
Object Type |
Object Value Scope |
|
ospfRouterId (1.3.6.1.2.1.14.1.1) |
AreaID |
IpAddress |
|
ospfVirtIfAreaId (1.3.6.1.2.1.14.9.1.1) |
AreaID |
IpAddress |
|
ospfVirtIfNeighbor (1.3.6.1.2.1.14.9.1.2) |
RouterID |
IpAddress |
|
ospfPacketType (1.3.6.1.2.1.14.16.1.3) |
INTEGER |
hello(1), dbDescript(2), lsReq(3), lsUpdate(4), lsAck(5) |
|
ospfLsdbType (1.3.6.1.2.1.14.4.1.2) |
INTEGER |
routerLink (1), networkLink (2), summaryLink (3), asSummaryLink (4), asExternalLink (5), multicastLink (6), nssaExternalLink (7) |
|
ospfLsdbLsid (1.3.6.1.2.1.14.4.1.3) |
IpAddress |
- |
|
ospfLsdbRouterId (1.3.6.1.2.1.14.4.1.4) |
RouterID |
IpAddress |
Trigger Action:
An OSPF packet has been retransmitted on a virtual interface.
Recommended Action:
The loss of packet because of the size and transmitting quality of network，remove congestion of network to improve transmitting quality of network.
OID of this trap is:
1.3.6.1.2.1.14.16.2.12
Module of MIB:
OSPF-MIB
MIB file:
rfc1850-ospf.mib
Description:
An ospfOriginateLsa trap signifies that a new LSA has been originated by this router.
|
Object Name |
Object Type |
Object Value Scope |
|
ospfRouterId (1.3.6.1.2.1.14.1.1) |
IpAddress |
- |
|
ospfLsdbAreaId (1.3.6.1.2.1.14.4.1.1) |
IpAddress |
- |
|
ospfLsdbType (1.3.6.1.2.1.14.4.1.2) |
INTEGER |
routerLink(1), networkLink(2), summaryLink(3), asSummaryLink(4), asExternalLink(5), multicastLink(6), nssaExternalLink(7) |
|
ospfLsdbLsid (1.3.6.1.2.1.14.4.1.3) |
IpAddress |
- |
|
ospfLsdbRouterId (1.3.6.1.2.1.14.4.1.4) |
IpAddress |
- |
Trigger Action:
This trap should not be invoked for simple refreshes of LSAs (which happens every 30 minutes), but instead will only be invoked when an LSA is (re)originated due to a topology change.
Recommended Action:
· Check for wrong plug and pull out actions before generation of the alarm, if no, go to 2)
· Check the network for any new router accessing, if no, go to 3)
· Check the network for any deleted router, if no, go to 4)
· Check routers for any interface down, If no, go to 5)
· Check the imported external route for any change
OID of this trap is:
1.3.6.1.2.1.14.16.2.13
Module of MIB:
OSPF-MIB
MIB file:
rfc1850-ospf.mib
Description:
An ospfMaxAgeLsa trap signifies that one of the LSA in the router's link-state database has aged to MaxAge.
|
Object Name |
Object Type |
Object Value Scope |
|
ospfRouterId (1.3.6.1.2.1.14.1.1) |
IpAddress |
- |
|
ospfLsdbAreaId (1.3.6.1.2.1.14.4.1.1) |
IpAddress |
- |
|
ospfLsdbType (1.3.6.1.2.1.14.4.1.2) |
INTEGER |
routerLink(1), networkLink(2), summaryLink(3), asSummaryLink(4), asExternalLink(5), multicastLink(6), nssaExternalLink(7) |
|
ospfLsdbLsid (1.3.6.1.2.1.14.4.1.3) |
IpAddress |
- |
|
ospfLsdbRouterId (1.3.6.1.2.1.14.4.1.4) |
IpAddress |
- |
Trigger Action:
One of the LSA in the router's link-state database has aged to MaxAge.
Recommended Action:
· Check for wrong configurations or wrong plug and pull out actions before generation of the alarm, if no, go to 2)
· Check the router that generated the lsa for any interface state change, if no, go to the next
· Check the router that generated the lsa for any identity change. For example, if the alarm occurs on category 3 lsa, see whether the router that generated the lsa is still ABR or not; if the alarm occurs on category 2 lsa, see whether the router that generated the lsa is still DR or not, etc. If no, go to the next
· Check the neighbor state for any change, if no, go to the next
· Check routers for any interface down in the network
OID of this trap is:
1.3.6.1.2.1.14.16.2.14
Module of MIB:
OSPF-MIB
MIB file:
rfc1850-ospf.mib
Description:
An ospfLsdbOverflow trap signifies that the number of LSAs in the router's link-state database has exceeded ospfExtLsdbLimit.
|
Object Name |
Object Type |
Object Value Scope |
|
ospfRouterId (1.3.6.1.2.1.14.1.1) |
IpAddress |
- |
|
ospfExtLsdbLimit (1.3.6.1.2.1.14.1.11) |
Integer32 |
The vlaue range is -1 and from 1 to 1000000. |
Trigger Action:
The number of LSAs in the router's link-state database has exceeded ospfExtLsdbLimit.
Recommended Action:
Decrease the number of imported external routes.
OID of this trap is:
1.3.6.1.2.1.14.16.2.15
Module of MIB:
OSPF-MIB
MIB file:
rfc1850-ospf.mib
Description:
An ospfLsdbApproachingOverflow trap signifies that the number of LSAs in the router's linkstate database has exceeded ninety percent of ospfExtLsdbLimit.
|
Object Name |
Object Type |
Object Value Scope |
|
ospfRouterId (1.3.6.1.2.1.14.1.1) |
IpAddress |
- |
|
ospfExtLsdbLimit (1.3.6.1.2.1.14.1.11) |
Integer32 |
-1 | 1..1000000 |
Trigger Action:
The number of LSAs in the router's linkstate database has exceeded ninety percent of ospfExtLsdbLimit.
Recommended Action:
Decrease the number of imported external routes.
OID of this trap is:
1.3.6.1.2.1.14.16.2.16
Module of MIB:
OSPF-MIB
MIB file:
rfc1850-ospf.mib
Description:
An ospfIfStateChange trap signifies that there has been a change in the state of a non-virtual OSPF interface. This trap should be generated when the interface state regresses (e.g., goes from Dr to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, Dr, or Backup).
|
Object Name |
Object Type |
Object Value Scope |
|
ospfRouterId (1.3.6.1.2.1.14.1.1) |
RouterID |
IpAddress |
|
ospfIfIpAddress (1.3.6.1.2.1.14.7.1.1) |
IpAddress |
- |
|
ospfAddressLessIf (1.3.6.1.2.1.14.7.1.2) |
Integer32 |
- |
|
ospfIfState (1.3.6.1.2.1.14.7.1.12) |
INTEGER |
down(1), loopback(2), waiting(3), pointToPoint(4), designatedRouter(5), backupDesignatedRouter(6), otherDesignatedRouter(7) |
Trigger Action:
The interface state regresses (e.g., goes from Dr to Down) or progresses to a terminal state(i.e., Point-to-Point, DR Other, Dr, or Backup).
Recommended Action:
No recovery is required for normal state change of OSPF interface.
As to normal change of Vlink state, it does not need to be recovered.
If the alarm is generated because the state of interface link changed, the reason of the state change should be found out. If the reason is that the interface is configured to be DOWN on the command line, you can restore it by configuring undo shutdown on the interface. If the hardware of the interface failed, please replace it. If the interface on peer end failed, you should troubleshoot on that interface.
OID of this trap is:
1.3.6.1.2.1.16.0.1
Module of MIB:
RMON-MIB
MIB file:
rfc2819-rmon.mib
Description:
The SNMP trap that is generated when an alarm entry crosses its rising threshold and generates an event that is configured for sending SNMP traps.
|
Object Name |
Object Type |
ObjectValueScope |
|
alarmIndex (1.3.6.1.2.1.16.3.1.1.1) |
Integer32 |
1..65535 |
|
alarmVariable (1.3.6.1.2.1.16.3.1.1.3) |
OBJECT IDENTIFIER |
- |
|
alarmSampleType (1.3.6.1.2.1.16.3.1.1.4) |
INTEGER |
absoluteValue(1), deltaValue(2) |
|
alarmValue (1.3.6.1.2.1.16.3.1.1.5) |
Integer32 |
- |
|
alarmRisingThreshold (1.3.6.1.2.1.16.3.1.1.7) |
Integer32 |
- |
Trigger Action:
An alarm entry crosses its rising threshold
Recommended Action:
No action is required.
OID of this trap is:
1.3.6.1.2.1.16.0.2
Module of MIB:
RMON-MIB
MIB file:
rfc2819-rmon.mib
Description:
The SNMP trap that is generated when an alarm entry crosses its falling threshold and generates an event that is configured for sending SNMP traps.
|
Object Name |
Object Type |
ObjectValueScope |
|
alarmIndex (1.3.6.1.2.1.16.3.1.1.1) |
Integer32 |
- |
|
alarmVariable (1.3.6.1.2.1.16.3.1.1.3) |
OBJECT IDENTIFIER |
- |
|
alarmSampleType (1.3.6.1.2.1.16.3.1.1.4) |
INTEGER |
absoluteValue(1), deltaValue(2) |
|
alarmValue (1.3.6.1.2.1.16.3.1.1.5) |
Integer32 |
- |
|
alarmFallingThreshold (1.3.6.1.2.1.16.3.1.1.8) |
Integer32 |
- |
Trigger Action:
An alarm entry crosses its falling threshold
Recommended Action:
No action is required.
OID of this trap is:
1.3.6.1.2.1.80.0.1
Module of MIB:
DISMAN-PING-MIB
MIB file:
rfc2925-disman-ping.mib
Description:
This trap is generated when a probe failure is detected when the corresponding pingCtlTrapGeneration object is set to probeFailure(0) subject to the value of pingCtlTrapProbeFailureFilter. The object pingCtlTrapProbeFailureFilter can be used to specify the number of successive probe failures that are required before this notification can be generated.
|
Object Name |
Object Type |
Object Value Scope |
|
pingCtlTargetAddressType (1.3.6.1.2.1.80.1.2.1.3) |
InetAddressType |
unknown(0), ipv4(1), ipv6(2), dns(16) |
|
pingCtlTargetAddress (1.3.6.1.2.1.80.1.2.1.4) |
InetAddress |
OCTET STRING (SIZE (0..255)) |
|
pingResultsOperStatus (1.3.6.1.2.1.80.1.3.1.1) |
INTEGER |
enabled(1), disabled(2) |
|
pingResultsIpTargetAddressType (1.3.6.1.2.1.80.1.3.1.2) |
InetAddressType |
unknown(0), ipv4(1), ipv6(2), dns(16) |
|
pingResultsIpTargetAddress (1.3.6.1.2.1.80.1.3.1.3) |
InetAddress |
OCTET STRING (SIZE (0..255)) |
|
pingResultsMinRtt (1.3.6.1.2.1.80.1.3.1.4) |
Unsigned32 |
- |
|
pingResultsMaxRtt (1.3.6.1.2.1.80.1.3.1.5) |
Unsigned32 |
- |
|
pingResultsAverageRtt (1.3.6.1.2.1.80.1.3.1.6) |
Unsigned32 |
- |
|
pingResultsProbeResponses (1.3.6.1.2.1.80.1.3.1.7) |
Unsigned32 |
- |
|
pingResultsSentProbes (1.3.6.1.2.1.80.1.3.1.8) |
Unsigned32 |
- |
|
pingResultsRttSumOfSquares (1.3.6.1.2.1.80.1.3.1.9) |
Unsigned32 |
- |
|
pingResultsLastGoodProbe (1.3.6.1.2.1.80.1.3.1.10) |
DateAndTime |
OCTET STRING (8 | 11) |
Trigger Action:
A probe failure is detected.
Recommended Action:
No action is required.
OID of this trap is:
1.3.6.1.2.1.80.0.2
Module of MIB:
DISMAN-PING-MIB
MIB file:
rfc2925-disman-ping.mib
Description:
This trap is generated when a ping test is determined to have failed when the corresponding pingCtlTrapGeneration object is set to testFailure(1). In this instance pingCtlTrapTestFailureFilter should specify the number of probes in a test required to have failed in order to consider the test as failed.
|
Object Name |
Object Type |
Object Value Scope |
|
pingCtlTargetAddressType (1.3.6.1.2.1.80.1.2.1.3) |
InetAddressType |
unknown(0), ipv4(1), ipv6(2), dns(16) |
|
pingCtlTargetAddress (1.3.6.1.2.1.80.1.2.1.4) |
InetAddress |
OCTET STRING (SIZE (0..255)) |
|
pingResultsOperStatus (1.3.6.1.2.1.80.1.3.1.1) |
INTEGER |
enabled(1), disabled(2) |
|
pingResultsIpTargetAddressType (1.3.6.1.2.1.80.1.3.1.2) |
InetAddressType |
unknown(0), ipv4(1), ipv6(2), dns(16) |
|
pingResultsIpTargetAddress (1.3.6.1.2.1.80.1.3.1.3) |
InetAddress |
OCTET STRING (SIZE (0..255)) |
|
pingResultsMinRtt (1.3.6.1.2.1.80.1.3.1.4) |
Unsigned32 |
- |
|
pingResultsMaxRtt (1.3.6.1.2.1.80.1.3.1.5) |
Unsigned32 |
- |
|
pingResultsAverageRtt (1.3.6.1.2.1.80.1.3.1.6) |
Unsigned32 |
- |
|
pingResultsProbeResponses (1.3.6.1.2.1.80.1.3.1.7) |
Unsigned32 |
- |
|
pingResultsSentProbes (1.3.6.1.2.1.80.1.3.1.8) |
Unsigned32 |
- |
|
pingResultsRttSumOfSquares (1.3.6.1.2.1.80.1.3.1.9) |
Unsigned32 |
- |
|
pingResultsLastGoodProbe (1.3.6.1.2.1.80.1.3.1.10) |
DateAndTime |
OCTET STRING (8 | 11) |
Trigger Action:
The corresponding pingCtlTrapGeneration object is set to testFailure(1).
Recommended Action:
No action is required.
OID of this trap is:
1.3.6.1.2.1.80.0.3
Module of MIB:
DISMAN-PING-MIB
MIB file:
rfc2925-disman-ping.mib
Description:
This trap is generated at the completion of a ping test when the corresponding pingCtlTrapGeneration object is set to testCompletion(4).
|
Object Name |
Object Type |
Object Value Scope |
|
pingCtlTargetAddressType (1.3.6.1.2.1.80.1.2.1.3) |
InetAddressType |
unknown(0), ipv4(1), ipv6(2), dns(16) |
|
pingCtlTargetAddress (1.3.6.1.2.1.80.1.2.1.4) |
InetAddress |
OCTET STRING (SIZE (0..255)) |
|
pingResultsOperStatus (1.3.6.1.2.1.80.1.3.1.1) |
INTEGER |
enabled(1), disabled(2) |
|
pingResultsIpTargetAddressType (1.3.6.1.2.1.80.1.3.1.2) |
InetAddressType |
unknown(0), ipv4(1), ipv6(2), dns(16) |
|
pingResultsIpTargetAddress (1.3.6.1.2.1.80.1.3.1.3) |
InetAddress |
OCTET STRING (SIZE (0..255)) |
|
pingResultsMinRtt (1.3.6.1.2.1.80.1.3.1.4) |
Unsigned32 |
- |
|
pingResultsMaxRtt (1.3.6.1.2.1.80.1.3.1.5) |
Unsigned32 |
- |
|
pingResultsAverageRtt (1.3.6.1.2.1.80.1.3.1.6) |
Unsigned32 |
- |
|
pingResultsProbeResponses (1.3.6.1.2.1.80.1.3.1.7) |
Unsigned32 |
- |
|
pingResultsSentProbes (1.3.6.1.2.1.80.1.3.1.8) |
Unsigned32 |
- |
|
pingResultsRttSumOfSquares (1.3.6.1.2.1.80.1.3.1.9) |
Unsigned32 |
- |
|
pingResultsLastGoodProbe (1.3.6.1.2.1.80.1.3.1.10) |
DateAndTime |
OCTET STRING (8 | 11) |
Trigger Action:
The corresponding pingCtlTrapGeneration object is set to testCompletion.
Recommended Action:
No action is required.
OID of this trap is:
1.3.6.1.2.1.105.0.1
Module of MIB:
POWER-ETHERNET-MIB
MIB file:
rfc3621-power-ethernet.mib
Description:
This Notification indicates if Pse Port is delivering or not power to the PD. This Notification SHOULD be sent on every status change except in the searching mode. At least 500 msec must elapse between notifications being emitted by the same object instance.
|
Object Name |
Object Type |
ObjectValueScope |
|
pethPsePortDetectionStatus (1.3.6.1.2.1.105.1.1.1.6) |
INTEGER |
1: disabled(1) 2: searching(2) 3: deliveringPower(3) 4: fault(4) 5: test(5) 6: otherFault(6) |
Trigger Action:
Pse Port is delivering or not power to the PD
Recommended Action:
No action is required.
OID of this trap is:
1.3.6.1.2.1.105.0.2
Module of MIB:
POWER-ETHERNET-MIB
MIB file:
rfc3621-power-ethernet.mib
Description:
This Notification indicates PSE Threshold usage indication is on, the usage power is above the threshold.At least 500 MSEL must elapse between notifications being emitted by the same object instance.
|
Object Name |
Object Type |
ObjectValueScope |
|
pethMainPseConsumptionPower (1.3.6.1.2.1.105.1.3.1.1.4) |
Gauge32 |
Measured usage power expressed in Watts |
Trigger Action:
The usage power is above the threshold.
Recommended Action:
No action is required
OID of this trap is:
1.3.6.1.2.1.105.0.3
Module of MIB:
POWER-ETHERNET-MIB
MIB file:
rfc3621-power-ethernet.mib
Description:
This Notification indicates PSE Threshold usage indication off, the usage power is below the threshold. At least 500 msec must elapse between notifications being emitted by the same object instance.
|
Object Name |
Object Type |
ObjectValueScope |
|
pethMainPseConsumptionPower (1.3.6.1.2.1.105.1.3.1.1.4) |
Gauge32 |
Measured usage power expressed in Watts |
Trigger Action:
The usage power is below the threshold.
Recommended Action:
No action is required.
OID of this trap is:
1.0.8802.1.1.2.0.0.1
Module of MIB:
LLDP-MIB
MIB file:
lldp.mib
Description:
A lldpRemTablesChange notification is sent when the value of lldpStatsRemTableLastChangeTime changes. It can be utilized by an NMS to trigger LLDP remote systems table maintenance polls.
Note that transmission of lldpRemTablesChange notifications are throttled by the agent, as specified by the 'lldpNotificationInterval' object."
|
Object Name |
Object Type |
ObjectValueScope |
|
lldpStatsRemTablesInserts (1.0.8802.1.1.2.1.2.2) |
ZeroBasedCounter32 |
- |
|
lldpStatsRemTablesDeletes (1.0.8802.1.1.2.1.2.3) |
ZeroBasedCounter32 |
- |
|
lldpStatsRemTablesDrops (1.0.8802.1.1.2.1.2.4) |
ZeroBasedCounter32 |
- |
|
lldpStatsRemTablesAgeouts (1.0.8802.1.1.2.1.2.5) |
ZeroBasedCounter32 |
- |
Trigger Action:
The remote system information is inserted, deleted, dropped or aged out.
Recommended Action:
The network management should confirm whether the net topology has been changed expectably.
OID of this trap is:
1.3.6.1.4.1.25506.2.2.1.1.3.0.1
Module of MIB:
HH3C-UI-MAN-MIB
MIB file:
hh3c-ui-man.mib
Description:
This notification is generated when a user logs in.
|
Object Name |
Object Type |
ObjectValueScope |
|
hh3cTerminalUserName (1.3.6.1.4.1.25506.2.2.1.1.2.1) |
DisplayString |
- |
|
hh3cTerminalSource (1.3.6.1.4.1.25506.2.2.1.1.2.2) |
DisplayString |
- |
Trigger Action:
A user logs in.
Recommended Action:
No action is required.
OID of this trap is:
1.3.6.1.4.1.25506.2.2.1.1.3.0.2
Module of MIB:
HH3C-UI-MAN-MIB
MIB file:
hh3c-ui-man.mib
Description:
This notification is generated when a user logs out.
|
Object Name |
Object Type |
ObjectValueScope |
|
hh3cTerminalUserName (1.3.6.1.4.1.25506.2.2.1.1.2.1) |
DisplayString |
- |
|
hh3cTerminalSource (1.3.6.1.4.1.25506.2.2.1.1.2.2) |
DisplayString |
- |
Trigger Action:
A user logs out.
Recommended Action:
No action is required.
OID of this trap is:
1.3.6.1.4.1.25506.2.2.1.1.3.0.3
Module of MIB:
HH3C-UI-MAN-MIB
MIB file:
hh3c-ui-man.mib
Description:
This notification is generated when a user fails to log in because of authentication.
|
Object Name |
Object Type |
ObjectValueScope |
|
hh3cTerminalUserName (1.3.6.1.4.1.25506.2.2.1.1.2.1) |
DisplayString |
- |
|
hh3cTerminalSource (1.3.6.1.4.1.25506.2.2.1.1.2.2) |
DisplayString |
- |
|
hh3cTerminalUserAuthFailureReason (1.3.6.1.4.1.25506.2.2.1.1.2.3) |
INTEGER |
exceedRetries(1), authTimeout(2), otherReason(3) |
Trigger Action:
A user fails to log in because of authentication.
Recommended Action:
Check user's authorization.
OID of this trap is:
1.3.6.1.4.1.25506.2.3.2.1
Module of MIB:
HH3C-SYS-MAN-MIB
MIB file:
hh3c-sys-man.mib
Description:
A clock changed notification is generated when the current local date and time for the system has been manually changed. The value of hh3cSysLocalClock reflects new date and time.
|
Object Name |
Object Type |
ObjectValueScope |
|
hh3cSysLocalClock (1.3.6.1.4.1.25506.2.3.1.1.1) |
DateAndTime |
- |
Trigger Action:
The current local date and time for the system has been manually changed.
Recommended Action:
All of the reload schedules need to be configured again, because all of them were cancelled.
OID of this trap is:
1.3.6.1.4.1.25506.2.3.2.2
Module of MIB:
HH3C-SYS-MAN-MIB
MIB file:
hh3c-sys-man.mib
Description:
An hh3cSysReloadNotification will be sent before the corresponding entity is rebooted. It will also be sent if the entity fails to reboot because the clock has changed.
|
Object Name |
Object Type |
ObjectValueScope |
|
hh3cSysReloadCfgFile (1.3.6.1.4.1.25506.2.3.1.3.3.1.3) |
Integer32 |
0..2147483647 |
|
hh3cSysReloadImage (1.3.6.1.4.1.25506.2.3.1.3.3.1.4) |
Integer32 |
0..2147483647 |
|
hh3cSysReloadReason (1.3.6.1.4.1.25506.2.3.1.3.3.1.5) |
DisplayString |
(SIZE (0..255)) |
|
hh3cSysReloadScheduleTime (1.3.6.1.4.1.25506.2.3.1.3.3.1.6) |
DateAndTime |
(SIZE(8)) |
|
hh3cSysReloadAction (1.3.6.1.4.1.25506.2.3.1.3.2) |
INTEGER |
reloadUnavailable(1), reloadOnSchedule(2), reloadAtOnce(3), reloadCancel(4) |
Trigger Action:
It will be sent before the corresponding entity is rebooted, or the entity fails to reboot because the clock has changed.
Recommended Action:
Check the status of reload schedule and the current time.
OID of this trap is:
1.3.6.1.4.1.25506.2.4.2.1
Module of MIB:
HH3C-CONFIG-MAN-MIB
MIB file:
hh3c-config-man.mib
Description:
The object calculates the checksum on the current config per 10 minutes and even if it is different from the saved config but if a trap has been sent with the same checksum then don't send again until the checksum is different.
|
Object Name |
Object Type |
ObjectValueScope |
|
hh3cCfgLogSrcCmd (1.3.6.1.4.1.25506.2.4.1.1.7.1.3) |
INTEGER |
cmdLine(1), snmp(2), other(3) |
|
hh3cCfgLogSrcData (1.3.6.1.4.1.25506.2.4.1.1.7.1.4) |
INTEGER |
erase(1), runningData(2), commandSource(3), startupData(4), local(5), netFtp(6), hotPlugging(7) |
|
hh3cCfgLogDesData (1.3.6.1.4.1.25506.2.4.1.1.7.1.5) |
INTEGER |
unkown(1), runningData(2), commandSource(3), startupData(4), local(5), etkFtp(6), hotPlugging(7) |
Trigger Action:
Every 10 minutes, the checksum of the current configuration will be compared with that of 10 minutes before, if the result is different, the trap will be sent.
Recommended Action:
Check the current configuration, save the current configuration if it is necessary.
OID of this trap is:
1.3.6.1.4.1.25506.2.4.2.2
Module of MIB:
HH3C-CONFIG-MAN-MIB
MIB file:
hh3c-config-man.mib
Description:
When create hh3cCfgOperateTable successfully, a notification may be generated.
|
Object Name |
Object Type |
ObjectValueScope |
|
hh3cCfgOperateType (1.3.6.1.4.1.25506.2.4.1.2.4.1.2) |
ConfigOperationType |
running2Startup(1), startup2Running(2), running2Net(3), net2Running(4), net2Startup(5), startup2Net(6) |
|
hh3cCfgOperateTime (1.3.6.1.4.1.25506.2.4.1.2.5.1.5) |
TimeTicks |
- |
|
hh3cCfgOperateState (1.3.6.1.4.1.25506.2.4.1.2.5.1.4) |
INTEGER |
opInProgress(1), opSuccess(2), opInvalidOperation(3), opInvalidProtocol(4), opInvalidSourceName(5), opInvalidDestName(6), opInvalidServerAddress(7), opDeviceBusy(8), opDeviceOpenError(9), opDeviceError(10), opDeviceNotProgrammable(11), opDeviceFull(12), opFileOpenError(13), opFileTransferError(14), opFileChecksumError(15), opNoMemory(16), opAuthFail(17), opTimeOut(18), opUnknownFailure(19) |
|
hh3cCfgOperateEndTime (1.3.6.1.4.1.25506.2.4.1.2.5.1.6) |
TimeTicks |
- |
Trigger Action:
When creating hh3cCfgOperateTable successfully, the trap may be generated.
Recommended Action:
Please wait until the operation done.
OID of this trap is:
1.3.6.1.4.1.25506.2.5.1.3.1
Module of MIB:
HH3C-FLASH-MAN-MIB
MIB file:
hh3c-flash-man.mib
Description:
A hh3cFlhOperNotification is sent at the completion of a flash copy operation if hh3cFlhOperEndNotification is true.
|
Object Name |
Object Type |
ObjectValueScope |
|
hh3cFlhOperStatus (1.3.6.1.4.1.25506.2.5.1.2.1.1.9) |
Hh3cFlashOperationStatus |
opInProgress(1), opSuccess(2), opInvalid(3), opInvalidProtocol(4), opInvalidSourceName(5), opInvalidDestName(6), opInvalidServerAddress(7), opDeviceBusy(8), opDeviceOpenError(9), opDeviceError(10), opDeviceNotProgrammable(11), opDeviceFull(12), opFileOpenError(13), opFileTransferError(14), opFileChecksumError(15), opNoMemory(16), opAuthFail(17), opTimeout(18), opUnknownFailure(19), opDeleteFileOpenError(20), opDeleteInvalidDevice(21), opDeleteInvalidFunction(22), opDeleteOperationError(23), opDeleteInvalidFileName(24), opDeleteDeviceBusy(25), opDeleteParaError(26), opDeleteInvalidPath(27) |
Trigger Action:
The completion of a flash copy operation if hh3cFlhOperEndNotification is true
Recommended Action:
No action is required.
OID of this trap is:
1.3.6.1.4.1.25506.2.6.2.0.4
Module of MIB:
HH3C-ENTITY-EXT-MIB
MIB file:
hh3c-entity-ext.mib
Description:
The CPU usage of the module is higher than the value of hh3cEntityExtCpuUsageThreshold. Only support Module Leve1.
We send the notification every 5 seconds until the CPU usage of the module goes down below the upper limit.
|
Object Name |
Object Type |
ObjectValueScope |
|
hh3cEntityExtPhysicalIndex (1.3.6.1.4.1.25506.2.6.1.1.1.1.1) |
INTEGER |
Integer32 |
|
hh3cEntityExtCpuUsage (1.3.6.1.4.1.25506.2.6.1.1.1.1.6) |
INTEGER |
Integer32 |
|
hh3cEntityExtCpuUsageThreshold (1.3.6.1.4.1.25506.2.6.1.1.1.1.7) |
INTEGER |
Integer32 |
|
hh3cEntityExtAdminStatus (1.3.6.1.4.1.25506.2.6.1.1.1.1.2) |
INTEGER |
Integer32 |
|
hh3cEntityExtAlarmLight (1.3.6.1.4.1.25506.2.6.1.1.1.1.5) |
INTEGER |
Integer32 |
Trigger Action:
An entity’s CPU usage goes over the upper limit
Recommended Action:
No action is required.
OID of this trap is:
1.3.6.1.4.1.25506.2.6.2.0.5
Module of MIB:
HH3C-ENTITY-EXT-MIB
MIB file:
hh3c-entity-ext.mib
Description:
The memory usage of the module is higher than the value of hh3cEntityExtMemUsageThreshold. Only support Module Leve1.
We send the notification every 5 seconds until the memory usage of the module goes down below the upper limit.
|
Object Name |
Object Type |
ObjectValueScope |
|
hh3cEntityExtPhysicalIndex (1.3.6.1.4.1.25506.2.6.1.1.1.1.1) |
INTEGER |
Integer32 |
|
hh3cEntityExtMemUsage (1.3.6.1.4.1.25506.2.6.1.1.1.1.8) |
INTEGER |
Integer32 |
|
hh3cEntityExtMemUsageThreshold (1.3.6.1.4.1.25506.2.6.1.1.1.1.9) |
INTEGER |
Integer32 |
|
hh3cEntityExtMemSize (1.3.6.1.4.1.25506.2.6.1.1.1.1.10) |
INTEGER |
Integer32 |
|
hh3cEntityExtAdminStatus (1.3.6.1.4.1.25506.2.6.1.1.1.1.2) |
INTEGER |
Integer32 |
|
hh3cEntityExtAlarmLight (1.3.6.1.4.1.25506.2.6.1.1.1.1.5) |
INTEGER |
Integer32 |
Trigger Action:
An entity’s memory usage goes over the upper limit.
Recommended Action:
No action is required
OID of this trap is:
1.3.6.1.4.1.25506.2.6.2.0.8
Module of MIB:
HH3C-ENTITY-EXT-MIB
MIB file:
hh3c-entity-ext.mib
Description:
The hh3cEntityExtCriticalTemperatureThresholdNotification indicates the temperature exceeds the critical temperature. In this condition, user should check the status and the environment of the entity, sometimes it happens because of the failure of air-condition.
|
Object Name |
Object Type |
Object Value Scope |
|
hh3cEntityExtPhysicalIndex (1.3.6.1.4.1.25506.2.6.1.1.1.1.1) |
INTEGER |
- |
|
hh3cEntityExtTemperature (1.3.6.1.4.1.25506.2.6.1.1.1.1.12) |
INTEGER |
- |
|
hh3cEntityExtCriticalTemperatureThreshold (1.3.6.1.4.1.25506.2.6.1.1.1.1.17) |
INTEGER |
- |
|
hh3cEntityExtAdminStatus (1.3.6.1.4.1.25506.2.6.1.1.1.1.2) |
Hh3cAdminState |
notSupported(1), locked(2), shuttingDown(3), unlocked(4) |
|
hh3cEntityExtAlarmLight .3.6.1.4.1.25506.2.6.1.1.1.1.5) |
Hh3cAlarmStatus |
notSupported(0), underRepair(1), critical(2), major(3), minor(4), alarmOutstanding(5), warning(6), indeterminate(7) |
Trigger Action:
When the temperature exceeds the critical temperature, the notification will be generated.
Recommended Action:
Dispatch to site take temperature reading to ensure that they are in range If they are not investigate enviormental alarms fan and filter dertermine the reason and rectify the problem. Please obtain the critical threshold by command "display environment".
OID of this trap is:
1.3.6.1.4.1.25506.2.38.1.1.4.1
Module of MIB:
HH3C-TRAP-MIB
MIB file:
hh3c-trap.mib
Description:
Send this trap when the MAC table is filled. The interval between two traps generated should be longer than hh3cMacTabTrapInterval.
|
Object Name |
Object Type |
Object Value Scope |
|
hh3cMacTabLen (1.3.6.1.4.1.25506.2.38.1.1.3.1) |
Integer32 |
- |
Trigger Action:
MAC table is filled.
Recommended Action:
Check if the system is under the attack.
OID of this trap is:
1.3.6.1.4.1.25506.2.38.1.1.4.2
Module of MIB:
HH3C-TRAP-MIB
MIB file:
hh3c-trap.mib
Description:
Send this trap when the MAC table is almost full. The interval between two traps generated should be longer than hh3cMacTabTrapInterval.
|
Object Name |
Object Type |
Object Value Scope |
|
NA |
NA |
NA |
Trigger Action:
MAC table is almost full.
Recommended Action:
Check if the system is under the attack.
OID of this trap is:
1.3.6.1.4.1.25506.2.38.1.2.4.1
Module of MIB:
HH3C-TRAP-MIB
MIB file:
hh3c-trap.mib
Description:
Send this trap when the ARP table is filled. The interval between two traps generated should be longer than hh3cArpTabTrapInterval.
|
Object Name |
Object Type |
Object Value Scope |
|
hh3cMacTabLen (1.3.6.1.4.1.25506.2.38.1.1.3.1) |
Integer32 |
- |
Trigger Action:
ARP table is filled.
Recommended Action:
If the system is not under the attack, max number of ARP configuration should be enlarge to accommodate the ARP.
OID of this trap is:
1.3.6.1.4.1.25506.2.38.1.2.4.2
Module of MIB:
HH3C-TRAP-MIB
MIB file:
hh3c-trap.mib
Description:
Send this trap when the ARP table is filled. The interval between two traps generated should be longer than hh3cArpTabTrapInterval.
|
Object Name |
Object Type |
Object Value Scope |
|
hh3cMacTabLen (1.3.6.1.4.1.25506.2.38.1.1.3.1) |
Integer32 |
- |
|
ifIndex (1.3.6.1.2.1.2.2.1.1) |
Integer32 |
- |
|
ifDescr (1.3.6.1.2.1.2.2.1.2) |
DisplayString |
OCTET STRING (0..255) |
Trigger Action:
Send this trap when the dynamic ARP number of the port exceeds the limitation.
Recommended Action:
If the system is not under the attack, max number of ARP configuration should be enlarge to accommodate the ARP.
OID of this trap is:
1.3.6.1.4.1.25506.2.66.3.1
Module of MIB:
HH3C-STORM-CONSTRAIN-MIB
MIB file:
hh3c-storm-constrain.mib
Description:
This trap message is generated when any type of the flux exceeds its upper limit on a port.
|
Object Name |
Object Type |
ObjectValueScope |
|
ifIndex(1.3.6.1.2.1.2.2.1.1) |
Integer32 |
1..2147483647 |
|
hh3cStormTrapType (1.3.6.1.4.1.25506.2.66.1.1) |
INTEGER |
broadcast(1), multicast(2), unicast(3) |
|
hh3cStormTrapThreshold (1.3.6.1.4.1.25506.2.66.1.2) |
Integer32 |
- |
|
hh3cStormCtrlPortStatus (1.3.6.1.4.1.25506.2.66.2.1.1.1) |
INTEGER |
controlled(1), normal(2) |
Trigger Action:
When any type of the flux exceeds its upper limit on a port, the notification will be generated.
Recommended Action:
Check the flux of the interface.
OID of this trap is:
1.3.6.1.4.1.25506.2.66.3.2
Module of MIB:
HH3C-STORM-CONSTRAIN-MIB
MIB file:
hh3c-storm-constrain.mib
Description:
This trap message is generated when a flux which used to overflow its upper limit, falls below its lower limit on a port.
|
Object Name |
Object Type |
ObjectValueScope |
|
ifIndex(1.3.6.1.2.1.2.2.1.1) |
Integer32 |
1..2147483647 |
|
hh3cStormTrapType (1.3.6.1.4.1.25506.2.66.1.1) |
INTEGER |
broadcast(1), multicast(2), unicast(3) |
|
hh3cStormTrapThreshold (1.3.6.1.4.1.25506.2.66.1.2) |
Integer32 |
- |
|
hh3cStormCtrlPortStatus (1.3.6.1.4.1.25506.2.66.2.1.1.1) |
INTEGER |
controlled(1), normal(2) |
Trigger Action:
This trap message is generated when a flux which used to overflow its upper limit, falls below its lower limit on a port.
Recommended Action:
No action is required.
OID of this trap is:
1.3.6.1.4.1.25506.8.35.14.0.1
Module of MIB:
HH3C-LswMSTP-MIB
MIB file:
hh3c-splat-mstp.mib
Description:
The SNMP trap that is generated when a port turns into forwarding state from other state.
|
Object Name |
Object Type |
ObjectValueScope |
|
hh3cdot1sInstanceID (1.3.6.1.4.1.25506.8.35.14.19.1.1) |
INTEGER |
0..64 |
|
hh3cdot1sMstiPortIndex (1.3.6.1.4.1.25506.8.35.14.20.1.1) |
INTEGER |
- |
Trigger Action:
STP's state machine is recalculated.
Recommended Action:
Please check whether there has link fault in the network after the network topology is stable.
OID of this trap is:
1.3.6.1.4.1.25506.8.35.14.0.2
Module of MIB:
HH3C-LswMSTP-MIB
MIB file:
hh3c-splat-mstp.mib
Description:
The SNMP trap that is generated when a port turns into discarding state from forwarding state.
|
Object Name |
Object Type |
ObjectValueScope |
|
hh3cdot1sInstanceID (1.3.6.1.4.1.25506.8.35.14.19.1.1) |
INTEGER |
0..64 |
|
hh3cdot1sMstiPortIndex (1.3.6.1.4.1.25506.8.35.14.20.1.1) |
INTEGER |
- |
Trigger Action:
STP's state machine is recalculated.
Recommended Action:
Please check whether there has link fault in the network after the network topology is stable.
OID of this trap is:
1.3.6.1.4.1.25506.8.35.14.0.3
Module of MIB:
HH3C-LswMSTP-MIB
MIB file:
hh3c-splat-mstp.mib
Description:
The SNMP trap that is generated when the bridge is no longer the root bridge of the instance. Another switch with higher priority has already been the root bridge of the instance.
|
Object Name |
Object Type |
ObjectValueScope |
|
hh3cdot1sInstanceID (1.3.6.1.4.1.25506.8.35.14.19.1.1) |
INTEGER |
0..64 |
Trigger Action:
The bridge is no longer the root bridge of the instance
Recommended Action:
Check the bridge priority configuration and possible attacks from other devices.
OID of this trap is:
1.3.6.1.4.1.25506.8.35.14.0.4
Module of MIB:
HH3C-LswMSTP-MIB
MIB file:
hh3c-splat-mstp.mib
Description:
The SNMP trap that is generated when a root-guard port receives a superior message on the relevant instance.
|
Object Name |
Object Type |
ObjectValueScope |
|
hh3cdot1sInstanceID (1.3.6.1.4.1.25506.8.35.14.19.1.1) |
INTEGER |
0..64 |
|
hh3cdot1sMstiPortIndex (1.3.6.1.4.1.25506.8.35.14.20.1.1) |
INTEGER |
|
Trigger Action:
A root-guard port receives a superior message on the relevant instance
Recommended Action:
Check the bridge priority configuration and possible attacks from other devices.
OID of this trap is:
1.3.6.1.4.1.25506.8.35.14.0.5
Module of MIB:
HH3C-LswMSTP-MIB
MIB file:
hh3c-splat-mstp.mib
Description:
The SNMP trap that is generated when an edged port of the BPDU-guard switch receives BPDU packets.
|
Object Name |
Object Type |
ObjectValueScope |
|
dot1dStpPort (1.3.6.1.2.1.17.2.15.1.1) |
INTEGER |
1..65535 |
Trigger Action:
An edged port of the BPDU-guard switch receives BPDU packets
Recommended Action:
Check whether the downstream devices are terminals and check for possible attacks from other devices.
OID of this trap is:
1.3.6.1.4.1.25506.8.35.14.0.6
Module of MIB:
HH3C-LswMSTP-MIB
MIB file:
hh3c-splat-mstp.mib
Description:
The SNMP trap that is generated when an Alternate-Port or Root-Port is aged out.
|
Object Name |
Object Type |
ObjectValueScope |
|
hh3cdot1sInstanceID (1.3.6.1.4.1.25506.8.35.14.19.1.1) |
INTEGER |
0..64 |
|
hh3cdot1sMstiPortIndex (1.3.6.1.4.1.25506.8.35.14.20.1.1) |
INTEGER |
- |
Trigger Action:
An Alternate-Port or Root-Port is aged out.
Recommended Action:
Check the STP status of the upstream device and possible attacks from other devices.
OID of this trap is:
1.3.6.1.4.1.25506.8.25.2.2
Module of MIB:
HH3C-LAG-MIB
MIB file:
hh3c-lag.mib
Description:
This event will be triggered whenever any port in aggregator is made inactive
|
Object Name |
Object Type |
ObjectValueScope |
|
hh3cAggLinkNumber (1.3.6.1.4.1.25506.8.25.1.1.1.1) |
Integer32 |
1..2048 |
Trigger Action:
Any port in aggregator is made inactive
Recommended Action:
Check the port's physical state and whether the configuration of the member port is the same as the aggregation interface.
Check the above-mentioned content of the port's partner in dynamic aggregation mode.
OID of this trap is:
1.3.6.1.4.1.25506.8.25.2.3
Module of MIB:
HH3C-LAG-MIB
MIB file:
hh3c-lag.mib
Description:
This event will be triggered whenever the port in aggregator is made inactive.
|
Object Name |
Object Type |
ObjectValueScope |
|
hh3cAggLinkNumber (1.3.6.1.4.1.25506.8.25.1.1.1.1) |
INTEGER |
1..2048 |
|
hh3cAggPortIndex (1.3.6.1.4.1.25506.8.25.1.2.1.1) |
Gauge32 |
- |
Trigger Action:
When the port in aggregator is made inactive.
Recommended Action:
Check the port's physical state and whether the configuration of the member port is the same as the aggregation interface.
Check the above-mentioned content of the port's partner in dynamic aggregation mode.
OID of this trap is:
1.3.6.1.4.1.25506.8.25.2.4
Module of MIB:
HH3C-LAG-MIB
MIB file:
hh3c-lag.mib
Description:
This event will be triggered whenever the port in aggregator is made active.
|
Object Name |
Object Type |
ObjectValueScope |
|
hh3cAggLinkNumber (1.3.6.1.4.1.25506.8.25.1.1.1.1) |
INTEGER |
1..2048 |
|
hh3cAggPortIndex (1.3.6.1.4.1.25506.8.25.1.2.1.1) |
Gauge32 |
- |
Trigger Action:
When the port in aggregator is made active.
Recommended Action:
No action is required.
OID of this trap is:
1.3.6.1.4.1.25506.6.8.3
Module of MIB:
HH3C-COMMON-SYSTEM-MIB
MIB file:
hh3c-common-system.mib
Description:
When users restart the device with command 'reboot', this trap will be sent two seconds before the device reboots.
|
Object Name |
Object Type |
ObjectValueScope |
|
N/A |
N/A |
N/A |
Trigger Action:
Users restart the device with command 'reboot'
Recommended Action:
No action is required.
OID of this trap is:
1.3.6.1.4.1.25506.8.4.0.1
Module of MIB:
HH3C-RMON-EXT-MIB
MIB file:
hh3c-rmon-ext.mib
Description:
The SNMP trap that is generated when an alarm entry crosses its rising threshold and generates an event that is configured for sending SNMP traps.
|
Object Name |
Object Type |
ObjectValueScope |
|
hh3cprialarmIndex (1.3.6.1.4.1.25506.8.4.4.1.1.1) |
INTEGER |
1..65535 |
|
hh3cprialarmVariable (1.3.6.1.4.1.25506.8.4.4.1.1.3) |
DisplayString |
- |
|
hh3cprialarmSampleType (1.3.6.1.4.1.25506.8.4.4.1.1.5) |
INTEGER |
absoluteValue(1), deltaValue(2), speedValue(3) |
|
hh3cprialarmValue (1.3.6.1.4.1.25506.8.4.4.1.1.6) |
INTEGER |
- |
|
hh3cprialarmRisingThreshold (1.3.6.1.4.1.25506.8.4.4.1.1.8) |
Integer32 |
- |
Trigger Action:
When the monitored sample value exceeds or is equal to the rising threshold, this trap will be generated.
Recommended Action:
A sample value rising to the threshold, something needed to do.
OID of this trap is:
1.3.6.1.4.1.25506.8.4.0.2
Module of MIB:
HH3C-RMON-EXT-MIB
MIB file:
hh3c-rmon-ext.mib
Description:
The SNMP trap that is generated when an alarm entry crosses its falling threshold and generates an event that is configured for sending SNMP traps.
|
Object Name |
Object Type |
ObjectValueScope |
|
hh3cprialarmIndex (1.3.6.1.4.1.25506.8.4.4.1.1.1) |
INTEGER |
1..65535 |
|
hh3cprialarmVariable (1.3.6.1.4.1.25506.8.4.4.1.1.3) |
DisplayString |
- |
|
hh3cprialarmSampleType (1.3.6.1.4.1.25506.8.4.4.1.1.5) |
INTEGER |
absoluteValue(1), deltaValue(2), speedValue(3) |
|
hh3cprialarmValue (1.3.6.1.4.1.25506.8.4.4.1.1.6) |
INTEGER |
- |
|
hh3cprialarmFallingThreshold (1.3.6.1.4.1.25506.8.4.4.1.1.9) |
Integer32 |
- |
Trigger Action:
When the monitored sample value is below or equal to the falling threshold, this trap will be generated.
Recommended Action:
A sample value falling to the threshold, something needed to do.
OID of this trap is:
1.3.6.1.4.1.25506.8.35.12.1.6
Module of MIB:
HH3C-LswTRAP-MIB
MIB file:
hh3c-splat-trap.mib
Description:
The fan of device is failure. It means that if the fan on device fails to work well, the trap will be sent.
|
Object Name |
Object Type |
ObjectValueScope |
|
hh3cDevMFanNum (1.3.6.1.4.1.25506.8.35.9.1.1.1.1) |
INTEGER |
- |
Trigger Action:
Remove a fan from its slot.
Recommended Action:
Insert a fan which works well into its slot.
OID of this trap is:
1.3.6.1.4.1.25506.8.35.12.1.7
Module of MIB:
HH3C-LswTRAP-MIB
MIB file:
hh3c-splat-trap.mib
Description:
If the status of fan changes to normal from abnormal, this trap will be generated.
|
Object Name |
Object Type |
ObjectValueScope |
|
hh3cDevMFanNum (1.3.6.1.4.1.25506.8.35.9.1.1.1.1) |
INTEGER |
- |
Trigger Action:
Insert a fan into its slot
Recommended Action:
No action is required.
OID of this trap is:
1.3.6.1.4.1.25506. 8.6.1.0.1
Module of MIB:
HH3C-8021PAE-MIB
MIB file:
hh3c-8021x-ext.mib
Description:
This trap is sent when NAS found that a client is trying to authenticate by using proxcy.
|
Object Name |
Object Type |
ObjectValueScope |
|
hh3cproxycheckVlanId (1.3.6.1.4.1.25506.8.6.1.0.2) |
INTEGER |
1..4094 |
|
hh3cproxycheckPortName (1.3.6.1.4.1.25506.8.6.1.0.3) |
OCTET STRING |
- |
|
hh3cproxycheckMacAddr (1.3.6.1.4.1.25506.8.6.1.0.4) |
MacAddress |
- |
|
hh3cproxycheckIpaddr (1.3.6.1.4.1.25506.8.6.1.0.5) |
IpAddress |
- |
|
hh3cproxycheckUsrName (1.3.6.1.4.1.25506.8.6.1.0.6) |
OCTET STRING |
- |
Trigger Action:
A client pc has 2 network card installed, then excute 802.1X authentication with H3C client software. And the H3C NAS must configure supplicant proxy-check trap.
Recommended Action:
Execute 802.1x authentications.
OID of this trap is:
1.3.6.1.4.1.25506.2.67.2.2.0.1
Module of MIB:
HH3C-TRAP-MIB
MIB file:
hh3c-trap.mib
Description:
This trap is generated when the device interface IP address is changed.
|
Object Name |
Object Type |
Object Value Scope |
|
hh3cIpAddrNotifyIfIndex (1.3.6.1.4.1.25506.2.67.2.1.1) |
Integer32 |
- |
|
hh3cIpAddrOldIpAddress (1.3.6.1.4.1.25506.2.67.2.1.2) |
OCTET STRING |
0..255 |
|
hh3cIpAddrNewIpAddress (1.3.6.1.4.1.25506.2.67.2.1.3) |
OCTET STRING |
0..255 |
Trigger Action:
The device interface IP address is changed.
Recommended Action:
No action is required.
OID of this trap is:
1.3.6.1.4.1.25506.8.7.1.0.1
Module of MIB:
HH3C-HGMP-MIB
MIB file:
hh3c-hgmp.mib
Description:
When one cluster member fails, send a trap to the network manager.
|
Object Name |
Object Type |
Object Value Scope |
|
hh3chgmpGrpMemberDeviceId (1.3.6.1.4.1.25506.8.7.1.14.1.1) |
OCTET STRING |
0..10 |
Trigger Action:
One cluster member fails.
Recommended Action:
Check if the communication between them and configuration of the member is right.
OID of this trap is:
1.3.6.1.4.1.25506.8.7.1.0.2
Module of MIB:
HH3C-HGMP-MIB
MIB file:
hh3c-hgmp.mib
Description:
When one cluster member recovers from failure, send a trap to the network manager.
|
Object Name |
Object Type |
Object Value Scope |
|
hh3chgmpGrpMemberDeviceId (1.3.6.1.4.1.25506.8.7.1.14.1.1) |
OCTET STRING |
0..10 |
Trigger Action:
One cluster member recovers from failure.
Recommended Action:
No action is required.
OID of this trap is:
1.3.6.1.4.1.25506.8.7.1.0.3
Module of MIB:
HH3C-HGMP-MIB
MIB file:
hh3c-hgmp.mib
Description:
When one cluster member’s status is changed, send a trap to the network manager.
|
Object Name |
Object Type |
Object Value Scope |
|
hh3chgmpGrpMemberDeviceId (1.3.6.1.4.1.25506.8.7.1.14.1.1) |
OCTET STRING |
0..10 |
|
hh3chgmpNTDPCacheClusterRole (1.3.6.1.4.1.25506.8.7.4.10.1.4) |
INTEGER |
roleCOSW(1), roleMSW(2), roleBKSW(3), roleCASW(16), roleUNISW(17) |
Trigger Action:
One cluster member’s status is changed.
Recommended Action:
No action is required.
OID of this trap is:
1.3.6.1.4.1.25506.8.7.1.0.4
Module of MIB:
HH3C-HGMP-MIB
MIB file:
hh3c-hgmp.mib
Description:
When topology of the cluster is changed, send a trap to the network manager.
|
Object Name |
Object Type |
Object Value Scope |
|
hh3chgmpGrpMemberDeviceId (1.3.6.1.4.1.25506.8.7.1.14.1.1) |
OCTET STRING |
0..10 |
Trigger Action:
Topology of the cluster is changed.
Recommended Action:
No action is required.
OID of this trap is:
1.3.6.1.4.1.25506.2.14.6.7
Module of MIB:
HH3C-POWER-ETH-EXT-MIB
MIB file:
hh3c-power-eth-ext.mib
Description:
This notification indicates the PoE power module fan error.
|
Object Type |
ObjectValueScope |
|
|
hh3cPoEAlarmModuleInfoIndex (1.3.6.1.4.1.25506.2.14.8.7.2.1.1) |
Integer32 |
- |
|
hh3cPoEModuleFanError (1.3.6.1.4.1.25506.2.14.8.7.2.1.7) |
INTEGER |
normal (1), alarm (2). |
Trigger Action:
The fan of PoE power module fault, the notification will be generated.
Recommended Action:
Check the fan of PoE power module. RMA if faulty.
不同款型规格的资料略有差异, 详细信息请向具体销售和400咨询。H3C保留在没有任何通知或提示的情况下对资料内容进行修改的权利!
支持
售前咨询
售后咨询
人工在线咨询
