• 产品与解决方案
  • 行业解决方案
  • 服务
  • 支持
  • 合作伙伴
  • 新华三人才研学中心
  • 关于我们

01-基础配置命令参考

目录

07-软件升级命令

本章节下载 07-软件升级命令  (110.94 KB)

docurl=/cn/Service/Document_Software/Document_Center/Routers/Catalog/LA_wireless/H3C_LA6600/Command/Command_Manual/H3C_LA6600_CR(V7)-R0605-6W200/01/201703/981132_30005_0.htm

07-软件升级命令


1 软件升级

如果将U盘内的软件包指定为设备下次启动时使用的软件包,重启设备时不要将U盘从设备上拔出,否则可能导致设备无法正常启动。建议将Flash中的软件包指定为设备下次启动时使用的软件包。

1.1  软件升级配置命令

1.1.1  boot-loader file

boot-loader file命令用来指定设备下次启动时使用的软件包/IPE文件(以下简称下次启动软件包/IPE文件)。

【命令】

boot-loader file boot boot-package system system-package [ feature feature-package&<1-30> ] { backup | main }

boot-loader file ipe-filename { backup | main }

【视图】

用户视图

【缺省用户角色】

network-admin

【参数】

boot boot-package:Boot包的名称,以.bin作为后缀名,从存储介质名开始最多可输入63个字符,不区分大小写。

system system-package:System包的名称,以.bin作为后缀名,从存储介质名开始最多可输入63个字符,不区分大小写。

feature feature-package:Feature包的名称,以.bin作为后缀名,从存储介质名开始最多可输入63个字符,不区分大小写。feature-package&<1-30>表示前面的参数最多可以输入30次。

ipe-filename:表示IPE(Image Package Envelope,复合软件包套件)文件的名称,以.ipe作为后缀名,从存储介质名开始最多可输入63个字符,不区分大小写。

all:用来升级整个系统。当用户获取的IPE包中包含IRF系统升级需要的所有软件包时,使用这样的IPE包,并指定all参数,执行一次boot-loader file命令,就能指定系统中所有硬件下次启动时使用的软件包/IPE文件。

backup:指定该软件包为备用启动软件包,并将该软件包的名称添加到备用启动软件包列表。备用启动软件包用于主用启动软件包不可用或异常情况时,引导设备启动。

main:指定该软件包为主用启动软件包,并将该软件包的名称添加到主用启动软件包列表。主用启动软件包用于引导设备启动。

【使用指导】

请不要通过多个用户同时执行该命令,以免配置失败。

请先查看软件包版本发布说明书,如果软件包需要License才能运行,且设备当前没有对应的有效的License时,需安装对应的License,再执行该命令。否则:

·     对于boot-loader file boot boot-package system system-package [ feature feature-package&<1-30> ] { backup | main }命令,只要指定某个的软件包当前没有有效的License,就会导致整条命令配置失败。

·     对于boot-loader file ipe-filename { backup | main }命令,只有当前没有有效的License的软件包配置失败,其它软件包会配置成功。

当配置该命令时,命令中指定的软件包/IPE文件必须放在设备存储介质主分区的根目录下,文件名中必须包含存储介质的名称,形如flash:/xx.bin(flash:/xx.ipe)。

成功执行该命令后,系统会用命令中指定的软件包替换现有的软件包列表。如果命令行中没有指定Feature包,则更新后的软件包列表中不会有Feature包。

【举例】

# 指定设备下次启动时所用的主用启动文件为flash:/all.ipe。

<Sysname> boot-loader file flash:/all.ipe main

Verifying the IPE file and the images............Done.

H3C LA6608 images in IPE:

  boot.bin

  system.bin

This command will set the main startup software images. Continue? [Y/N]:Y

Add images to the device.

File flash:/boot.bin already exists on the device.

File flash:/system.bin already exists on the device.

Overwrite the existing files? [Y/N]:Y

Decompressing file boot.bin to flash:/boot.bin........................Done.

Decompressing file system.bin to flash:/system.bin...............................Done.

The images that have passed all examinations will be used as the main startup software images at the next reboot on the device..

# 指定设备下次启动时所用的主用启动文件为flash:/boot.bin和flash:/system.bin。

<Sysname> boot-loader file boot flash:/boot.bin system flash:/system.bin main

This command will set the main startup software images. Continue? [Y/N]:y

Verifying the file flash:/boot.bin on the device...Done.

Verifying the file flash:/system.bin on the device........Done.

The images that have passed all examinations will be used as the main startup software images at the next reboot on the device.

【相关命令】

·     display boot-loader

1.1.2  display boot-loader

display boot-loader命令用来显示本次启动和下次启动所采用的启动软件包的名称。

【命令】

display boot-loader

【视图】

任意视图

【缺省用户角色】

network-admin

network-operator

【举例】

# 显示本次启动和下次启动所采用的启动软件包的名称。

<Sysname> display boot-loader

Software images on the device:

Current software images:

  flash:/boot.bin

  flash:/system.bin

Main startup software images:

  flash:/boot.bin

  flash:/system.bin

Backup startup software images:

  flash:/boot.bin

  flash:/system.bin

表1-1 display boot-loader命令显示信息描述表

字段

描述

Software images on the device

启动软件包的相关信息

Current software images

最近一次启动使用的启动软件包列表

Main startup software images

主用下次启动软件包列表

Backup startup software images

备用下次启动软件包列表

 

【相关命令】

·     boot-loader file

1.1.3  firmware update

firmware update命令用来升级CPLD等固件。

【命令】

firmware update slot slot-number { cpld cpld-number | module module-number } file filename

【视图】

用户视图

【缺省用户角色】

network-admin

【参数】

slot slot-number:表示单板所在的槽位号。

cpld cpld-number:表示需要升级CPLD(Complex Programmable Logical Device复杂可编程逻辑器件),cpld-number表示固件的编号。

module module-number:表示需要升级指定模块,module-number表示模块的编号。

file filename:升级文件的名称。不同固件升级文件的后缀可能不同,文件名从存储介质名开始最多可输入63个字符,不区分大小写。

【使用指导】

固件升级后需要对其所在的板卡进行下电后重新上电才能生效,对板卡下电的方式有:切断外部电源、插拔板卡等方式,请根据板卡的实际支持情况,选择下电方式。

【举例】

# 升级1号CPLD。

<Sysname> firmware update slot 0 cpld 1 file package.bin

Updating firmware for CPLD on the specified card or subcard. Continue?[Y/N]:y

Updating the firmware…

Please power cycle the card or subcard to activate the firmware.

不同款型规格的资料略有差异, 详细信息请向具体销售和400咨询。H3C保留在没有任何通知或提示的情况下对资料内容进行修改的权利!

新华三官网
联系我们