Login
- Table of Contents
- Related Documents
-
| Title | Size | Download |
|---|---|---|
| 01-Text | 1.42 MB |
1 Product models and technical specifications
3 FRUs and compatibility matrixes
FRUs and compatibility matrixes
180W AC power supplies (PSR180-12A-B and PSR180-12A-F)
180W DC power supply (PSR180-12D-B)
10/100/1000BASE-T autosensing Ethernet port
10/100/1000BASE-T autosensing Ethernet port LED
1 Product models and technical specifications
Product models
|
Product series |
Product code |
Product model |
|
S6510 series |
S6510-50QS |
LS-6510-50QS |
|
S6510-2C |
LS-6510-2C |
Technical specifications
Table1-1 Technical specifications
|
Item |
S6510-50QS |
S6510-2C |
|
|
Physical specifications |
|||
|
Dimensions (H × W × D) |
44 × 440 × 360 mm (1.73 × 17.32 × 14.17 in) |
44 × 440 × 400 mm (1.73 × 17.32 × 15.75 in) |
|
|
Dimensions (H × W × D, with package materials) |
120 × 560 × 485 mm (4.72 × 22.05 × 19.09 in) |
180 × 678 × 576 mm (7.09 × 26.69 × 22.68 in) |
|
|
Weight |
≤ 7.0 kg (15.43 lb) |
≤ 7.5 kg (16.53 lb) |
|
|
Technical specifications |
|||
|
Memory (RAM) |
2 GB |
2 GB |
|
|
Flash |
1 GB |
1 GB |
|
|
Port type and quantity |
|||
|
Console port |
1 × serial console port |
· 1 × serial console port · 1 × Type-C console port Only the Type-C console port is available when you connect both ports. |
|
|
USB port |
1 |
1 |
|
|
Management Ethernet port |
1 |
1 |
|
|
SFP+ port |
24 |
8 |
|
|
QSFP+ port |
2 |
N/A |
|
|
SFP28 port |
N/A |
4 |
|
|
10/100/1000BASE-T autosensing Ethernet port |
24 |
N/A |
|
|
Interface module and power supply slots |
|||
|
Interface module slot |
N/A |
2 |
|
|
Power supply slot |
2 |
2 |
|
|
Power supply specifications |
|||
|
Power input type |
AC input and DC input Note: For DC input, you can use a –48 VDC power source in the equipment room or an RPS (H3C RPS1600-A). |
||
|
Power supply specifications |
See "Removable power supplies" |
||
|
System power consumption |
|||
|
Power consumption (static) Data collection standard: no load |
Single AC input: 38 W Dual AC inputs: 45 W Single DC input: 38 W Dual DC inputs: 45 W |
Single AC input: 28 W Dual AC inputs: 35 W Single DC input: 31 W Dual DC inputs: 37 W |
|
|
Power consumption (typical) Data collection standard: fully configured with copper cables or network cables, 30% traffic |
Single AC input: 76 W Dual AC inputs: 82 W Single DC input: 76 W Dual DC inputs: 82 W |
Single AC input: 72 W Dual AC inputs: 75 W Single DC input: 75 W Dual DC inputs: 80 W |
|
|
Power consumption (full load) Data collection standard: fully configured with transceiver modules or network cables, 100% traffic |
Single AC input: 85 W Dual AC inputs: 92 W Single DC input: 85 W Dual DC inputs: 92 W |
Single AC input: 91 W Dual AC inputs: 94 W Single DC input: 95 W Dual DC inputs: 101 W |
|
|
System thermal consumption |
|||
|
Thermal consumption (static) Data collection standard: no load |
Single AC input: 129.66 BTU/hr Dual AC inputs: 153.55 BTU/hr Single DC input: 129.66 BTU/hr Dual DC inputs: 153.55 BTU/hr |
Single AC input: 96 BTU/hr Dual AC inputs: 119 BTU/hr Single DC input: 106 BTU/hr Dual DC inputs: 126 BTU/hr |
|
|
Thermal consumption (typical) Data collection standard: fully configured with copper cables or network cables, 30% traffic |
Single AC input: 259.32 BTU/hr Dual AC inputs: 279.80 BTU/hr Single DC input: 259.32 BTU/hr Dual DC inputs: 279.80 BTU/hr |
Single AC input: 246 BTU/hr Dual AC inputs: 256 BTU/hr Single DC input: 256 BTU/hr Dual DC inputs: 273 BTU/hr |
|
|
Thermal consumption (full load) Data collection standard: fully configured with transceiver modules or network cables, 100% traffic |
Single AC input: 290.03 BTU/hr Dual AC inputs: 313.92 BTU/hr Single DC input: 290.03 BTU/hr Dual DC inputs: 313.92 BTU/hr |
Single AC input: 311 BTU/hr Dual AC inputs: 321 BTU/hr Single DC input: 324 BTU/hr Dual DC inputs: 345 BTU/hr |
|
|
Heat dissipation |
|||
|
Heat dissipation method |
Air cooling |
||
|
Ventilation aisle |
From the port side to the power supply side (facing the front panel) |
||
|
Reliability and availability |
|||
|
Mean Time Between Failures (MTBF) (years) |
105.15 |
66.95 |
|
|
Mean Time To Repair (MTTR) (hours) |
1 |
||
|
Availability |
99.999891% |
99.99983% |
|
|
Environment specifications |
|||
|
Sound pressure level at 27°C (80.6°F) |
45.3 dBA |
47.6 dBA |
|
|
Altitude |
0 to 5000 m (0 to 16404.20 ft) |
||
|
Operating temperature |
–5ºC to +45ºC (23°F to 113°F) NOTE: The allowed maximum temperature decreases by 0.33°C (0.59°F) as the altitude increases by 100 m (328.08 ft) from 0 m (0 ft). |
–5ºC to +50ºC (23°F to 122°F) NOTE: The allowed maximum temperature decreases by 0.33°C (0.59°F) as the altitude increases by 100 m (328.08 ft) from 0 m (0 ft). |
|
|
Storage temperature |
–40°C to +70°C (–40°F to +158°F) |
||
|
Relative humidity (non-condensing) |
5% to 95% |
||
|
Compliance |
|||
|
Product compliance |
· Safety standards · EMC standards · Environmental and eco-friendly standards |
||
2 Chassis views
Chassis views
S6510-50QS
Figure2-1 S6510-50QS front panel
|
(1) 10/100/1000BASE-T autosensing Ethernet port |
(2) 10/100/1000BASE-T autosensing Ethernet port LED |
|
(3) SFP+ port |
(4) SFP+ port LED |
|
(5) QSFP+ port |
(6) QSFP+ port LED |
|
(7) Management Ethernet port LED (ACT/LINK) |
(8) Power supply 1 status LED (PWR1) |
|
(9) Power supply 2 status LED (PWR2) |
(10) System status LED (SYS) |
|
(11) Mode LED (MODE) |
(12) Mode button |
|
(13) USB port |
(14) Management Ethernet port (MGMT) |
|
(15) Console port (CONSOLE) |
|
Figure2-2 S6510-50QS rear panel
|
(1) Grounding screw |
(2) Power supply 1 |
|
(3) Power supply 2 |
|
|
|
NOTE: The S6510-50QS switch came with power supply slot 1 empty and power supply slot 2 installed with a filler panel. You can install one or two power supplies for the switch as needed. In Figure2-2, two PSR180-12A-B AC power supplies are installed in the power supply slots. |
S6510-2C
Figure2-3 S6510-2C front panel
|
(1) Interface module 1 |
(2) Interface module 2 |
|
(3) Serial console port (CONSOLE) |
(4) Interface module 2 status LED (SLOT2) |
|
(5) Interface module 1 status LED (SLOT1) |
(6) Power supply 1 status LED (PWR1) |
|
(7) Power supply 2 status LED (PWR2) |
(8) System status LED (SYS) |
|
(9) ID LED (ID) |
(10) Type-C console port (CONSOLE) |
|
(11) Reset button (RESET) |
(12) Management Ethernet port LED (ACT/LINK) |
|
(13) Management Ethernet port (MGMT) |
|
|
|
NOTE: The S6510-2C switch came with the two interface module slots each installed with a filler panel. You can install one or two interface modules for the switch as needed. In Figure2-3, two LSWM28T16SFP interface modules are installed in the interface module slots. |
|
(1) Grounding screw |
(2) SFP+ port |
|
(3) SFP+ port LED |
(4) SFP28 port |
|
(5) SFP28 port LED |
(6) Power supply 1 |
|
(7) Power supply 2 |
(8) USB port |
|
|
NOTE: The S6510-2C switch came with power supply slot 1 empty and power supply slot 2 installed with a filler panel. You can install one or two power supplies for the switch as needed. In Figure2-4, two PSR180-12A-B AC power supplies are installed in the power supply slots. |
3 FRUs and compatibility matrixes
FRUs and compatibility matrixes
The switch uses modular design. Table3-1 describes the FRUs available for the switch.
Table3-1 FRUs and compatibility matrix
|
FRU model |
S6510-50QS |
S6510-2C |
|
Removable power supplies |
||
|
PSR180-12A-B (air exhausted from the power supply faceplate) |
Supported |
Supported |
|
PSR180-12A-F (air drawn from the power supply faceplate) |
Supported |
N/A |
|
PSR180-12D-B (air exhausted from the power supply faceplate) |
Supported |
Supported |
|
Removable interface modules |
||
|
LSWM224T |
N/A |
Supported |
|
LSWM224SFP |
N/A |
Supported |
|
LSWM28T16SFP |
N/A |
Supported |
|
LSWM216T8SFP |
N/A |
Supported |
|
|
NOTE: · The power supplies support asset management. You can use the display device manuinfo command to view the name, sequence number, and vendor of the power supplies you have installed on the switch. · One power supply can meet the power requirement of the switch. You can install two power supplies on the switch for 1+1 redundancy. The switch supports installation of both an AC power supply and a DC power supply. |
4 Removable power supplies
180W AC power supplies (PSR180-12A-B and PSR180-12A-F)
View
The PSR180-12A-F and PSR180-12A-B AC power supplies are similar in views except for their marks and airflow directions.
Figure4-1 PSR180-12A-B AC power supply view
Functions
The PSR180-12A-F and PSR180-12A-B are AC-input and DC-output AC power supplies. They provide an output voltage of 12 V and a maximum output of 180 W.
Table4-1 PSR180-12A-F and PSR180-12A-B power supply features
|
Feature |
Description |
|
Protection function |
The power supplies provide protection against input overcurrent, input undervoltage, output overvoltage, output current limiting, output shortcircuit, and overtemperature conditions. |
|
Support for redundancy |
Two power supplies can be connected in parallel to achieve 1+1 redundancy and load balancing. |
|
Support for hot swapping |
You can remove one of the power supplies in 1+1 redundancy when the switch is operating. |
Technical specifications
Table4-2 Technical specifications
|
Item |
Specification |
|
Dimensions (H × W × D, including the handle) |
41.1 × 101.6 × 207 mm (1.62 × 4.00 × 8.15 in) |
|
Weight |
0.8 kg (1.76 lb) |
|
Rated AC input voltage range |
100 VAC to 240 VAC @ 50 Hz or 60 Hz |
|
Maximum AC input voltage range |
90 VAC to 290 VAC @ 47 Hz to 63 Hz |
|
Rated input current |
N/A |
|
Rated output current |
15 A |
|
Rated output voltage |
12 V |
|
Rated output power |
180 W |
|
Melting current of power supply fuse |
6.3 A/250 V |
180W DC power supply (PSR180-12D-B)
View
Figure4-2 PSR180-12D-B DC power supply view
Functions
The PSR180-12D-B is a DC-input and DC-output power supply. It provides an output voltage of 12 V and a maximum output of 180 W.
Table4-3 PSR180-12D-B power supply features
|
Feature |
Description |
|
Protection function |
The power supply provides protection against input overcurrent, input undervoltage, output overvoltage, output current limiting, output shortcircuit, and overtemperature conditions. |
|
Support for redundancy |
Two power supplies can be connected in parallel to achieve 1+1 redundancy and load balancing. |
|
Support for hot swapping |
You can remove one of the power supplies in 1+1 redundancy when the switch is operating. |
Technical specifications
Table4-4 Technical specifications
|
Item |
Specification |
|
Dimensions (H × W × D, including the handle) |
41.1 × 101.6 × 207 mm (1.62 × 4.00 × 8.15 in) |
|
Weight |
1 kg (2.20 lb) |
|
Rated input voltage range |
–48 VDC to –60 VDC |
|
Maximum input voltage range |
–36 VDC to –72 VDC |
|
Rated input current |
N/A |
|
Rated output current |
15 A |
|
Rated output voltage |
12 V |
|
Rated output power |
180 W |
|
Melting current of power supply fuse |
8 A/125 V |
5 Interface modules
The S6510-2C switch provides two interface module slots. Install interface modules in the slots as required.
You can install an interface module in any interface module slot on the S6510-2C switch.
You can install or remove an interface module when the switch is operating correctly. Do not install or remove an interface module while the switch is starting up.
Table5-1 Support of SFP ports on an interface module for the autonegotiation feature
|
Interface module model |
Installation slot |
Available transceiver module type |
Support for autonegotiation |
|
LSWM224SFP |
SLOT1 |
100M |
No. |
|
1G |
Yes. This feature is enabled by default. You can disable the feature by using the speed 1000 and duplex full commands. |
||
|
2.5G |
No. |
||
|
SLOT2 |
1G |
Yes. This feature is enabled by default. You can disable the feature by using the speed 1000 and duplex full commands. |
|
|
2.5G |
No. |
||
|
LSWM28T16SFP |
SLOT1 |
100M |
No. |
|
1G |
Yes. This feature is enabled by default. You can disable the feature by using the speed 1000 and duplex full commands. |
||
|
2.5G |
No. |
||
|
SLOT2 |
1G |
Yes. This feature is enabled by default. You can disable the feature by using the speed 1000 and duplex full commands. |
|
|
2.5G |
No. |
||
|
LSWM216T8SFP |
SLOT1 |
100M |
No. |
|
1G |
Yes. This feature is enabled by default. You can disable the feature by using the speed 1000 and duplex full commands. |
||
|
2.5G |
No. |
||
|
SLOT2 |
1G |
Yes. This feature is enabled by default. You can disable the feature by using the speed 1000 and duplex full commands. |
|
|
2.5G |
No. |
Table5-2 Support of 10/100/1000Base-T ports on an interface module for the half duplex mode
|
Interface module model |
Installation slot |
Support for the half duplex mode |
|
LSWM224T |
SLOT1 |
Yes. |
|
SLOT2 |
No. |
|
|
LSWM216T8SFP |
SLOT1 |
Yes. |
|
SLOT2 |
No. |
|
|
LSWM28T16SFP |
SLOT1 |
Yes. |
|
SLOT2 |
No. |
LSWM224T
About LSWM224T
The LSWM224T interface module provides twenty-four 10/100/1000Base-T ports.
Figure5-2 LSWM224T front panel
|
(1) 10/100/1000BASE-T autosensing Ethernet port |
(2) 10/100/1000BASE-T autosensing Ethernet port LED |
|
(3) Ejector lever |
(4) Latch |
Technical specifications
Table5-3 Technical specifications
|
Item |
Specification |
|
Dimensions (H × W × D) |
41 × 190 × 157 mm (1.61 × 7.48 × 6.18 in) |
|
Weight |
0.8 kg (1.76 lb) |
|
Power consumption (static) |
N/A |
|
Power consumption (typical) |
N/A |
|
Power consumption (at full load) |
8 W |
Ports and LEDs
10/100/1000BASE-T port and LED
Table5-4 10/100/1000BASE-T port specifications
|
Item |
Specification |
|
Connector type |
RJ-45 |
|
Transmission rate, duplex mode, and auto MDI/MDI-X |
· 10 Mbps, full/half duplex · 100 Mbps, full/half duplex · 1000 Mbps, full duplex · MDI/MDI-X autosensing |
|
Max transmission distance |
100 m (328.08 ft) |
|
Transmission medium |
Category 5 or above twisted pair cable |
|
Compliant standard |
IEEE 802.3i, 802.3u, 802.3ab |
Table5-5 10/100/1000BASE-T port LED description
|
Item |
Description |
|
Steady green |
A link is present on the port and the port is operating at 1000 Mbps. |
|
Flashing green |
The port is receiving or sending data at 1000 Mbps. |
|
Steady yellow |
A link is present on the port and the port is operating at 10/100 Mbps. |
|
Flashing yellow |
The port is receiving or sending data at 10/100 Mbps. |
|
Off |
No module is installed or no link is present on the port. |
LSWM224SFP
About LSWM224SFP
The LSWM224SFP interface module provides twenty-four 2.5G/1G SFP ports.
Figure5-3 LSWM224SFP front panel
|
(1) 2.5G/1G SFP port |
(2) 2.5G/1G SFP port LED |
|
(3) Ejector lever |
(4) Latch |
Technical specifications
Table5-6 Technical specifications
|
Item |
Specification |
|
Dimensions (H × W × D) |
41 × 190 × 157 mm (1.61 × 7.48 × 6.18 in) |
|
Weight |
0.8 kg (1.76 lb) |
|
Power consumption (static) |
N/A |
|
Power consumption (typical) |
N/A |
|
Power consumption (at full load) |
22 W |
Ports and LEDs
2.5G/1G SFP port and LED
Table5-7 2.5G/1G SFP port specifications
|
Item |
Specification |
|
Port type |
SFP port |
|
Available transceiver modules and cables |
· FE SFP transceiver modules described in Table5-9. (FE SFP transceiver modules are supported only when the interface module is installed in SLOT1.) · GE SFP transceiver modules and cables described in Table5-10. · 2.5G SFP transceiver modules described in Table5-11. |
|
Restrictions and guidelines |
· To use GE SFP copper transceiver modules, make sure the operating temperature does not exceed 40°C (104°F). · To use a 2.5G SFP transceiver module to connect to the peer end, use dual-fiber connection. If single-fiber connection is used, only one end of the link is up, which affects normal communication. |
Table5-8 2.5G/1G SFP port LED description
|
Item |
Description |
|
Steady green |
A link is present on the port and the port is operating at 2.5 Gbps. |
|
Flashing green |
The port is receiving or sending data at 2.5 Gbps. |
|
Steady yellow |
A link is present on the port and the port is operating at 1 Gbps/100 Mbps. |
|
Flashing yellow |
The port is receiving or sending data at 1 Gbps/100 Mbps. |
|
Off |
No module is installed or no link is present on the port. |
Table5-9 FE SFP transceiver modules available for the SFP ports
|
Transceiver module type |
Transceiver module model |
Central wavelength (nm) |
Connector type |
Cable
specifica |
Mode band- |
Maximum
trans- |
|
SFP transceiver module |
SFP-FE-SX-MM1310-A |
1310 |
LC |
50/125, MMF |
N/A |
2 km (1.24 miles) |
|
62.5/125, MMF |
||||||
|
SFP-FE-LX-SM1310-A |
1310 |
LC |
9/125, SMF |
N/A |
15 km (9.32 miles) |
|
|
SFP-FE-LX-SM1310-D |
1310 |
LC |
9/125, SMF |
N/A |
15 km (9.32 miles) |
|
|
SFP-FE-LH40-SM1310 |
1310 |
LC |
9/125, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP-FE-LH80-SM1550 |
1550 |
LC |
9/125, SMF |
N/A |
80 km (49.71 miles) |
Table5-10 GE SFP transceiver modules and cables available for the SFP ports
|
Transceiver
module |
Transceiver
module |
Central
wave- |
Connector type |
Cable
specifica- |
Mode band- |
Maximum
trans- |
|
SFP copper transceiver module |
SFP-GE-T |
N/A |
RJ-45 |
Twisted pair cable |
N/A |
100 m (328.08 ft) |
|
SFP transceiver module |
SFP-GE-SX-MM850-A |
850 |
LC |
50/125, MMF |
500 |
550 m (1804.46 ft) |
|
400 |
500 m (1640.42 ft) |
|||||
|
62.5/125, MMF |
200 |
275 m (902.23 ft) |
||||
|
160 |
220 m (721.78 ft) |
|||||
|
SFP-GE-LX-SM1310-A |
1310 |
LC |
9/125, SMF |
N/A |
10 km (6.21 miles) |
|
|
50/125, MMF |
500/400 |
550 m (1804.46 ft) |
||||
|
62.5/125, MMF |
500 |
550 m (1804.46 ft) |
||||
|
SFP-GE-LX10-SM1310 |
1310 |
LC |
9/125, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-GE-LH20-SM1310-I |
1310 |
LC |
9/125, SMF |
N/A |
20 km (12.43 miles) |
|
|
SFP-GE-LH40-SM1310-I |
1310 |
LC |
9/125, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP-GE-LH40-SM1310 |
1310 |
LC |
9/125, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP-GE-LH40-SM1550 |
1550 |
LC |
9/125, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP-GE-LH80-SM1550 |
1550 |
LC |
9/125, SMF |
N/A |
80 km (49.71 miles) |
|
|
SFP-GE-LH100-SM1550 |
1550 |
LC |
9/125, SMF |
N/A |
100 km (62.14 miles) |
|
|
SFP-GE-LX-SM1310-BIDI |
Tx: 1310 Rx: 1490 |
LC |
9/125, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-GE-LX-SM1490-BIDI |
Tx: 1490 Rx: 1310 |
LC |
9/125, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-GE-LX-SM1310-BIDI-I |
Tx: 1310 Rx: 1490 |
LC |
9/125, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-GE-LX-SM1490-BIDI-I |
Tx: 1490 Rx: 1310 |
LC |
9/125, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-GE-LH70-SM1490-BIDI |
Tx: 1490 Rx: 1550 |
LC |
9/125, SMF |
N/A |
70 km (43.50 miles) |
|
|
SFP-GE-LH70-SM1550-BIDI |
Tx: 1550 Rx: 1490 |
LC |
9/125, SMF |
N/A |
70 km (43.50 miles) |
|
|
SFP-GE-LH40-SM1310-BIDI |
Tx: 1310 Rx: 1550 |
LC |
9/125, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP-GE-LH40-SM1550-BIDI |
Tx: 1550 Rx: 1310 |
LC |
9/125, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP copper cable |
SFP-STACK-Kit |
N/A |
N/A |
SFP copper cable |
N/A |
1.5 m (4.92 ft) |
|
|
IMPORTANT: The SFP-GE-LX-SM1310-BIDI and SFP-GE-LX-SM1490-BIDI transceiver modules, the SFP-GE-LX-SM1310-BIDI-I and SFP-GE-LX-SM1490-BIDI-I transceiver modules, the SFP-GE-LH70-SM1490-BIDI and SFP-GE-LH70-SM1550-BIDI transceiver modules, and the SFP-GE-LH40-SM1310-BIDI and SFP-GE-LH40-SM1550-BIDI transceiver modules must be used in pairs. For example, if one end uses the SFP-GE-LX-SM1310-BIDI transceiver module, the other end must use the SFP-GE-LX-SM1490-BIDI transceiver module. |
Table5-11 2.5G SFP transceiver modules available for the SFP ports
|
Transceiver module type |
Transceiver module model |
Central
wave- |
Connec- |
Cable specifica-tions (µm) |
Mode band- |
Maximum transmission distance |
|
2.5G SFP transceiver module |
SFP-2.5G-LX10-SM1310-DR |
1310 |
LC |
9/125, SMF |
N/A |
10 km (6.21 miles) |
|
SFP-2.5G-LX10-SM1310-DR-L |
1310 |
LC |
9/125, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-2.5G-LX03-SM1490-BIDI |
Tx: 1490 Rx: 1310 |
LC |
9/125, SMF |
N/A |
3 km (1.86 miles) |
|
|
SFP-2.5G-LX03-SM1310-BIDI |
Tx: 1310 Rx: 1490 |
LC |
9/125, SMF |
N/A |
3 km (1.86 miles) |
|
|
IMPORTANT: The SFP-2.5G-LX03-SM1490-BIDI and SFP-2.5G-LX03-SM1310-BIDI transceiver modules must be used in pairs. For example, if one end uses the SFP-2.5G-LX03-SM1490-BIDI transceiver module, the other end must use the SFP-2.5G-LX03-SM1310-BIDI transceiver module. |
LSWM28T16SFP
About LSWM28T16SFP
The LSWM28T16SFP interface module provides eight 10/100/1000Base-T ports and sixteen 2.5G/1G SFP ports.
Figure5-4 LSWM28T16SFP front panel
|
(1) 2.5G/1G SFP port |
(2) 2.5G/1G SFP port LED |
|
(3) Ejector lever |
(4) Latch |
|
(5) 10/100/1000BASE-T autosensing Ethernet port |
(6) 10/100/1000BASE-T autosensing Ethernet port LED |
Technical specifications
Table5-12 Technical specifications
|
Item |
Specification |
|
Dimensions (H × W × D) |
41 × 190 × 157 mm (1.61 × 7.48 × 6.18 in) |
|
Weight |
0.8 kg (1.76 lb) |
|
Power consumption (static) |
N/A |
|
Power consumption (typical) |
N/A |
|
Power consumption (at full load) |
16 W |
Ports and LEDs
10/100/1000BASE-T port and LED
Table5-13 10/100/1000BASE-T port specifications
|
Item |
Specification |
|
Connector type |
RJ-45 |
|
Transmission rate, duplex mode, and auto MDI/MDI-X |
· 10 Mbps, full/half duplex · 100 Mbps, full/half duplex · 1000 Mbps, full duplex · MDI/MDI-X autosensing |
|
Max transmission distance |
100 m (328.08 ft) |
|
Transmission medium |
Category 5 or above twisted pair cable |
|
Compliant standard |
IEEE 802.3i, 802.3u, 802.3ab |
Table5-14 10/100/1000BASE-T port LED description
|
Item |
Description |
|
Steady green |
A link is present on the port and the port is operating at 1000 Mbps. |
|
Flashing green |
The port is receiving or sending data at 1000 Mbps. |
|
Steady yellow |
A link is present on the port and the port is operating at 10/100 Mbps. |
|
Flashing yellow |
The port is receiving or sending data at 10/100 Mbps. |
|
Off |
No module is installed or no link is present on the port. |
2.5G/1G SFP port and LED
Table5-15 2.5G/1G SFP port specifications
|
Item |
Specifications |
|
Port type |
SFP port |
|
Available transceiver modules and cables |
· FE SFP transceiver modules described in Table5-17. (FE SFP transceiver modules are supported only when the interface module is installed in SLOT1) · GE SFP transceiver modules and cables described in Table5-18. · 2.5G SFP transceiver modules described in Table5-19. |
|
Restrictions and guidelines |
· To use GE SFP copper transceiver modules, make sure the operating temperature does not exceed 40°C (104°F). · To use a 2.5G SFP transceiver module to connect to the peer end, use dual-fiber connection. If single-fiber connection is used, only one end of the link is up, which affects normal communication. |
Table5-16 2.5G/1G SFP port LED description
|
Item |
Description |
|
Steady green |
A link is present on the port and the port is operating at 2.5 Gbps. |
|
Flashing green |
The port is receiving or sending data at 2.5 Gbps. |
|
Steady yellow |
A link is present on the port and the port is operating at 1 Gbps/100 Mbps. |
|
Flashing yellow |
The port is receiving or sending data at 1 Gbps/100 Mbps. |
|
Off |
No module is installed or no link is present on the port. |
Table5-17 FE SFP transceiver modules available for the SFP ports
|
Trans- |
Trans- |
Central wavelength (nm) |
Connector type |
Cable
specifica- |
Mode band- |
Maximum transmission distance |
|
SFP transceiver module |
SFP-FE-SX-MM1310-A |
1310 |
LC |
50/125, MMF |
N/A |
2 km (1.24 miles) |
|
62.5/125, MMF |
||||||
|
SFP-FE-LX-SM1310-A |
1310 |
LC |
9/125, SMF |
N/A |
15 km (9.32 miles) |
|
|
SFP-FE-LX-SM1310-D |
1310 |
LC |
9/125, SMF |
N/A |
15 km (9.32 miles) |
|
|
SFP-FE-LH40-SM1310 |
1310 |
LC |
9/125, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP-FE-LH80-SM1550 |
1550 |
LC |
9/125, SMF |
N/A |
80 km (49.71 miles) |
Table5-18 GE SFP transceiver modules and cables available for the SFP ports
|
Transceiver
module |
Transceiver
module |
Central
wave- |
Connec- |
Cable
specifica- |
Mode bandwidth (MHz*km) |
Maxi- |
|
SFP copper transceiver module |
SFP-GE-T |
N/A |
RJ-45 |
Twisted pair cable |
N/A |
100 m (328.08 ft) |
|
SFP transceiver module |
SFP-GE-SX-MM850-A |
850 |
LC |
50/125, MMF |
500 |
550 m (1804.46 ft) |
|
400 |
500 m (1640.42 ft) |
|||||
|
62.5/125, MMF |
200 |
275 m (902.23 ft) |
||||
|
160 |
220 m (721.78 ft) |
|||||
|
SFP-GE-LX-SM1310-A |
1310 |
LC |
9/125, SMF |
N/A |
10 km (6.21 miles) |
|
|
50/125, MMF |
500/400 |
550 m (1804.46 ft) |
||||
|
62.5/125, MMF |
500 |
550 m (1804.46 ft) |
||||
|
SFP-GE-LX10-SM1310 |
1310 |
LC |
9/125, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-GE-LH20-SM1310-I |
1310 |
LC |
9/125, SMF |
N/A |
20 km (12.43 miles) |
|
|
SFP-GE-LH40-SM1310-I |
1310 |
LC |
9/125, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP-GE-LH40-SM1310 |
1310 |
LC |
9/125, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP-GE-LH40-SM1550 |
1550 |
LC |
9/125, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP-GE-LH80-SM1550 |
1550 |
LC |
9/125, SMF |
N/A |
80 km (49.71 miles) |
|
|
SFP-GE-LH100-SM1550 |
1550 |
LC |
9/125, SMF |
N/A |
100 km (62.14 miles) |
|
|
SFP-GE-LX-SM1310-BIDI |
Tx: 1310 Rx: 1490 |
LC |
9/125, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-GE-LX-SM1490-BIDI |
Tx: 1490 Rx: 1310 |
LC |
9/125, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-GE-LX-SM1310-BIDI-I |
Tx: 1310 Rx: 1490 |
LC |
9/125, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-GE-LX-SM1490-BIDI-I |
Tx: 1490 Rx: 1310 |
LC |
9/125, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-GE-LH70-SM1490-BIDI |
Tx: 1490 Rx: 1550 |
LC |
9/125, SMF |
N/A |
70 km (43.50 miles) |
|
|
SFP-GE-LH70-SM1550-BIDI |
Tx: 1550 Rx: 1490 |
LC |
9/125, SMF |
N/A |
70 km (43.50 miles) |
|
|
SFP-GE-LH40-SM1310-BIDI |
Tx: 1310 Rx: 1550 |
LC |
9/125, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP-GE-LH40-SM1550-BIDI |
Tx: 1550 Rx: 1310 |
LC |
9/125, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP copper cable |
SFP-STACK-Kit |
N/A |
N/A |
SFP copper cable |
N/A |
1.5 m (4.92 ft) |
|
|
IMPORTANT: The SFP-GE-LX-SM1310-BIDI and SFP-GE-LX-SM1490-BIDI transceiver modules, the SFP-GE-LX-SM1310-BIDI-I and SFP-GE-LX-SM1490-BIDI-I transceiver modules, the SFP-GE-LH70-SM1490-BIDI and SFP-GE-LH70-SM1550-BIDI transceiver modules, and the SFP-GE-LH40-SM1310-BIDI and SFP-GE-LH40-SM1550-BIDI transceiver modules must be used in pairs. For example, if one end uses the SFP-GE-LX-SM1310-BIDI transceiver module, the other end must use the SFP-GE-LX-SM1490-BIDI transceiver module. |
Table5-19 2.5G SFP transceiver modules available for the SFP ports
|
Trans- |
Trans- |
Central
wave- |
Connec- |
Cable specifications (µm) |
Mode band- |
Maximum transmission distance |
|
2.5G SFP transceiver module |
SFP-2.5G-LX10-SM1310-DR |
1310 |
LC |
9/125, SMF |
N/A |
10 km (6.21 miles) |
|
SFP-2.5G-LX10-SM1310-DR-L |
1310 |
LC |
9/125, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-2.5G-LX03-SM1490-BIDI |
Tx: 1490 Rx: 1310 |
LC |
9/125, SMF |
N/A |
3 km (1.86 miles) |
|
|
SFP-2.5G-LX03-SM1310-BIDI |
Tx: 1310 Rx: 1490 |
LC |
9/125, SMF |
N/A |
3 km (1.86 miles) |
|
|
IMPORTANT: The SFP-2.5G-LX03-SM1490-BIDI and SFP-2.5G-LX03-SM1310-BIDI transceiver modules must be used in pairs. For example, if one end uses the SFP-2.5G-LX03-SM1490-BIDI transceiver module, the other end must use the SFP-2.5G-LX03-SM1310-BIDI transceiver module. |
LSWM216T8SFP
About LSWM216T8SFP
The LSWM216T8SFP interface module provides sixteen 10/100/1000Base-T ports and eight 2.5G/1G SFP ports.
Figure5-5 LSWM216T8SFP front panel
|
(1) 2.5G/1G SFP port |
(2) 2.5G/1G SFP port LED |
|
(3) Ejector lever |
(4) Latch |
|
(5) 10/100/1000BASE-T autosensing Ethernet port |
(6) 10/100/1000BASE-T autosensing Ethernet port LED |
Technical specifications
Table5-20 Technical specifications
|
Item |
Specification |
|
Dimensions (H × W × D) |
41 × 190 × 157 mm (1.61 × 7.48 × 6.18 in) |
|
Weight |
0.8 kg (1.76 lb) |
|
Power consumption (static) |
N/A |
|
Power consumption (typical) |
N/A |
|
Power consumption (at full load) |
13 W |
Ports and LEDs
10/100/1000BASE-T port and LED
Table5-21 10/100/1000BASE-T port specifications
|
Item |
Specification |
|
Connector type |
RJ-45 |
|
Transmission rate, duplex mode, and auto MDI/MDI-X |
· 10 Mbps, full/half duplex · 100 Mbps, full/half duplex · 1000 Mbps, full duplex · MDI/MDI-X autosensing |
|
Max transmission distance |
100 m (328.08 ft) |
|
Transmission medium |
Category 5 or above twisted pair cable |
|
Compliant standard |
IEEE 802.3i, 802.3u, 802.3ab |
Table5-22 10/100/1000BASE-T port LED description
|
Item |
Description |
|
Steady green |
A link is present on the port and the port is operating at 1000 Mbps. |
|
Flashing green |
The port is receiving or sending data at 1000 Mbps. |
|
Steady yellow |
A link is present on the port and the port is operating at 10/100 Mbps. |
|
Flashing yellow |
The port is receiving or sending data at 10/100 Mbps. |
|
Off |
No module is installed or no link is present on the port. |
2.5G/1G SFP port and LED
Table5-23 2.5G/1G SFP port specifications
|
Item |
Specification |
|
Port type |
SFP port |
|
Available transceiver modules and cables |
· FE SFP transceiver modules described in Table5-25. (FE SFP transceiver modules are supported only when the interface module is installed in SLOT1) · GE SFP transceiver modules and cables described in Table5-26. · 2.5G SFP transceiver modules described in Table5-27. |
|
Restrictions and guidelines |
· To use GE SFP copper transceiver modules, make sure the operating temperature does not exceed 40°C (104°F). · To use a 2.5G SFP transceiver module to connect to the peer end, use dual-fiber connection. If single-fiber connection is used, only one end of the link is up, which affects normal communication. |
Table5-24 2.5G/1G SFP port LED description
|
Item |
Description |
|
Steady green |
A link is present on the port and the port is operating at 2.5 Gbps. |
|
Flashing green |
The port is receiving or sending data at 2.5 Gbps. |
|
Steady yellow |
A link is present on the port and the port is operating at 1 Gbps/100 Mbps. |
|
Flashing yellow |
The port is receiving or sending data at 1 Gbps/100 Mbps. |
|
Off |
No module is installed or no link is present on the port. |
Table5-25 FE SFP transceiver modules available for the SFP ports
|
Trans- |
Trans- |
Central
wave- |
Connector type |
Cable
specifica- |
Mode bandwidth (MHz*km) |
Maximum
trans- |
|
SFP transceiver module |
SFP-FE-SX-MM1310-A |
1310 |
LC |
50/125, MMF |
N/A |
2 km (1.24 miles) |
|
62.5/125, MMF |
||||||
|
SFP-FE-LX-SM1310-A |
1310 |
LC |
9/125, SMF |
N/A |
15 km (9.32 miles) |
|
|
SFP-FE-LX-SM1310-D |
1310 |
LC |
9/125, SMF |
N/A |
15 km (9.32 miles) |
|
|
SFP-FE-LH40-SM1310 |
1310 |
LC |
9/125, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP-FE-LH80-SM1550 |
1550 |
LC |
9/125, SMF |
N/A |
80 km (49.71 miles) |
Table5-26 GE SFP transceiver modules and cables available for the SFP ports
|
Transceiver
module |
Transceiver
module |
Central
wave- |
Connec |
Cable
specifica- |
Mode band- |
Maximum
trans- |
|
SFP copper transceiver module |
SFP-GE-T |
N/A |
RJ-45 |
Twisted pair cable |
N/A |
100 m (328.08 ft) |
|
SFP transceiver module |
SFP-GE-SX-MM850-A |
850 |
LC |
50/125, MMF |
500 |
550 m (1804.46 ft) |
|
400 |
500 m (1640.42 ft) |
|||||
|
62.5/125, MMF |
200 |
275 m (902.23 ft) |
||||
|
160 |
220 m (721.78 ft) |
|||||
|
SFP-GE-LX-SM1310-A |
1310 |
LC |
9/125, SMF |
N/A |
10 km (6.21 miles) |
|
|
50/125, MMF |
500/400 |
550 m (1804.46 ft) |
||||
|
62.5/125, MMF |
500 |
550 m (1804.46 ft) |
||||
|
SFP-GE-LX10-SM1310 |
1310 |
LC |
9/125, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-GE-LH20-SM1310-I |
1310 |
LC |
9/125, SMF |
N/A |
20 km (12.43 miles) |
|
|
SFP-GE-LH40-SM1310-I |
1310 |
LC |
9/125, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP-GE-LH40-SM1310 |
1310 |
LC |
9/125, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP-GE-LH40-SM1550 |
1550 |
LC |
9/125, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP-GE-LH80-SM1550 |
1550 |
LC |
9/125, SMF |
N/A |
80 km (49.71 miles) |
|
|
SFP-GE-LH100-SM1550 |
1550 |
LC |
9/125, SMF |
N/A |
100 km (62.14 miles) |
|
|
SFP-GE-LX-SM1310-BIDI |
Tx: 1310 Rx: 1490 |
LC |
9/125, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-GE-LX-SM1490-BIDI |
Tx: 1490 Rx: 1310 |
LC |
9/125, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-GE-LX-SM1310-BIDI-I |
Tx: 1310 Rx: 1490 |
LC |
9/125, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-GE-LX-SM1490-BIDI-I |
Tx: 1490 Rx: 1310 |
LC |
9/125, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-GE-LH70-SM1490-BIDI |
Tx: 1490 Rx: 1550 |
LC |
9/125, SMF |
N/A |
70 km (43.50 miles) |
|
|
SFP-GE-LH70-SM1550-BIDI |
Tx: 1550 Rx: 1490 |
LC |
9/125, SMF |
N/A |
70 km (43.50 miles) |
|
|
SFP-GE-LH40-SM1310-BIDI |
Tx: 1310 Rx: 1550 |
LC |
9/125, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP-GE-LH40-SM1550-BIDI |
Tx: 1550 Rx: 1310 |
LC |
9/125, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP copper cable |
SFP-STACK-Kit |
N/A |
N/A |
SFP copper cable |
N/A |
1.5 m (4.92 ft) |
|
|
IMPORTANT: The SFP-GE-LX-SM1310-BIDI and SFP-GE-LX-SM1490-BIDI transceiver modules, the SFP-GE-LX-SM1310-BIDI-I and SFP-GE-LX-SM1490-BIDI-I transceiver modules, the SFP-GE-LH70-SM1490-BIDI and SFP-GE-LH70-SM1550-BIDI transceiver modules, and the SFP-GE-LH40-SM1310-BIDI and SFP-GE-LH40-SM1550-BIDI transceiver modules must be used in pairs. For example, if one end uses the SFP-GE-LX-SM1310-BIDI transceiver module, the other end must use the SFP-GE-LX-SM1490-BIDI transceiver module. |
Table5-27 2.5G SFP transceiver modules available for the SFP ports
|
Transceiver module type |
Transceiver module model |
Central
wave- |
Connec- |
Cable
specifica |
Mode bandwidth (MHz*km) |
Maximum
trans- |
|
2.5G SFP transceiver module |
SFP-2.5G-LX10-SM1310-DR |
1310 |
LC |
9/125, SMF |
N/A |
10 km (6.21 miles) |
|
SFP-2.5G-LX10-SM1310-DR-L |
1310 |
LC |
9/125, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-2.5G-LX03-SM1490-BIDI |
Tx: 1490 Rx: 1310 |
LC |
9/125, SMF |
N/A |
3 km (1.86 miles) |
|
|
SFP-2.5G-LX03-SM1310-BIDI |
Tx: 1310 Rx: 1490 |
LC |
9/125, SMF |
N/A |
3 km (1.86 miles) |
|
|
IMPORTANT: The SFP-2.5G-LX03-SM1490-BIDI and SFP-2.5G-LX03-SM1310-BIDI transceiver modules must be used in pairs. For example, if one end uses the SFP-2.5G-LX03-SM1490-BIDI transceiver module, the other end must use the SFP-2.5G-LX03-SM1310-BIDI transceiver module. |
6 Ports and LEDs
Ports
Console port
Table6-1 Console port specifications (1)
|
Item |
Specification |
|
Connector type |
RJ-45 |
|
Compliant standard |
EIA/TIA-232 |
|
Speed |
9600 bps (default) to 115200 bps |
|
Supported services |
· Provides connection to an ASCII terminal. · Provides connection to the serial port of a local terminal (for example, a PC) running a terminal emulation program. |
|
Compatible switch models |
All models |
Table6-2 Console port specifications (2)
|
Item |
Specification |
|
Connector type |
USB Type-C |
|
Compliant standard |
USB 2.0 |
|
Speed |
9600 bps (default) to 115200 bps |
|
Supported services |
· Provides connection to an ASCII terminal. · Provides connection to the serial port of a local terminal (for example, a PC) running a terminal emulation program. |
|
Compatible switch models |
S6510-2C |
Management Ethernet port
Table6-3 Management Ethernet port specifications
|
Item |
Specification |
|
Connector type |
RJ-45 |
|
Transmission baud rate |
· 10 Mbps, full/half duplex · 100 Mbps, full/half duplex · 1000 Mbps, full duplex · MDI/MDI-X autosensing |
|
Transmission medium |
Category 5 or above twisted pair cable |
|
Max transmission distance |
100 m (328.08 ft) |
|
Compliant standard |
IEEE 802.3i, 802.3u, 802.3ab |
|
Functions and services |
Used for upgrading and managing applications and Boot ROM |
|
Compatible switch models |
All switch models |
USB port
Table6-4 USB port specifications
|
Item |
Specification |
|
Port type |
USB 2.0 |
|
Compliant standard |
OHC |
|
Port transmission rate |
Uploads and downloads data at a rate up to 480 Mbps |
|
Functions and services |
Accesses the file system on the flash of the switch, for example, to upload or download application and configuration files |
|
Compatible switch models |
All switch models |
|
|
NOTE: USB devices from different vendors vary in compatibilities and drivers. H3C does not guarantee the correct operation of USB devices from all vendors on the switch. If a USB device fails to operate on the switch, replace it with one from another vendor. |
SFP+ port
Table6-5 SFP+ port specifications
|
Item |
Specification |
|
Port type |
SFP+ port |
|
Available transceiver modules and cables |
· S6510-50QS ¡ GE SFP transceiver modules and cables described in Table6-6 ¡ 10GE SFP+ transceiver modules and cables described in Table6-9 · S6510-2C ¡ GE SFP transceiver modules and cables described in Table6-7 ¡ 2.5GE SFP transceiver modules described in Table6-8 ¡ 10GE SFP+ transceiver modules and cables described in Table6-10 |
|
Restrictions and guidelines |
· S6510-50QS To use transceiver modules with a maximum transmission distance greater than or equal to 80 km (49.71 miles) or GE copper transceiver modules, make sure the operating temperature does not exceed 40°C (104°F). Do not install the transceiver modules in adjacent ports. · S6510-2C ¡ To use 10GE SFP+ transceiver modules with a minimum transmission distance of 80 km (49.71 miles) or GE SFP copper transceiver modules, make sure the operating temperature does not exceed 40°C (104°F). ¡ To use 10GE SFP-10GE-T copper transceiver modules, make sure the operating temperature does not exceed 40°C (104°F). Do not install the transceiver modules in adjacent ports. ¡ To use a 2.5G SFP transceiver module to connect to the peer end, make sure the peer end is configured with the speed 2500 and duplex full commands. ¡ To use a 2.5G SFP transceiver module to connect to the peer end, use dual-fiber connection. If single-fiber connection is used, only one end of the link is up, which affects normal communication. |
|
Compatible switch models |
All switch models |
Table6-6 GE SFP transceiver modules and cables available for the SFP+ ports (1)
|
Trans- |
Transceiver module/ cable model |
Central
wave- |
Connec- |
Cable
specifica- |
Mode band- |
Maximum transmission distance |
|
SFP copper transceiver module |
SFP-GE-T |
N/A |
RJ-45 |
Twisted pair cable |
N/A |
100 m (328.08 ft) |
|
SFP-GE-T-D |
N/A |
RJ-45 |
Twisted pair cable |
N/A |
100 m (328.08 ft) |
|
|
SFP transceiver module |
SFP-GE-SX-MM850-A |
850 nm |
LC |
50/125 µm, MMF |
500 |
550 m (1804.46 ft) |
|
400 |
500 m (1640.42 ft) |
|||||
|
62.5/125 µm, MMF |
200 |
275 m (902.23 ft) |
||||
|
160 |
220 m (721.78 ft) |
|||||
|
SFP-GE-LX-SM1310-A |
1310 nm |
LC |
9/125 µm, SMF |
N/A |
10 km (6.21 miles) |
|
|
50/125 µm, MMF |
500/400 |
550 m (1804.46 ft) |
||||
|
62.5/125 µm, MMF |
500 |
550 m (1804.46 ft) |
||||
|
SFP-GE-LX10-SM1310 |
1310 nm |
LC |
9/125 µm, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-GE-LH20-SM1310-I |
1310 nm |
LC |
9/125 µm, SMF |
N/A |
20 km (12.43 miles) |
|
|
SFP-GE-LH40-SM1310-I |
1310 nm |
LC |
9/125 µm, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP-GE-LH40-SM1310 |
1310 nm |
LC |
9/125 µm, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP-GE-LH40-SM1310-D |
1310 nm |
LC |
9/125 µm, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP-GE-LH40-SM1550 |
1550 nm |
LC |
9/125 µm, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP-GE-LH80-SM1550 |
1550 nm |
LC |
9/125 µm, SMF |
N/A |
80 km (49.71 miles) |
|
|
SFP-GE-LH80-SM1550-D |
1550 nm |
LC |
9/125 µm, SMF |
N/A |
80 km (49.71 miles) |
|
|
SFP-GE-LH100-SM1550 |
1550 nm |
LC |
9/125 µm, SMF |
N/A |
100 km (62.14 miles) |
|
|
SFP-GE-LX-SM1310-BIDI |
Tx: 1310 nm Rx: 1490 nm |
LC |
9/125 µm, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-GE-LX-SM1490-BIDI |
Tx: 1490 nm Rx: 1310 nm |
LC |
9/125 µm, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-GE-LX-SM1310-BIDI-I |
Tx: 1310 nm Rx: 1490 nm |
LC |
9/125 µm, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-GE-LX-SM1490-BIDI-I |
Tx: 1490 nm Rx: 1310 nm |
LC |
9/125 µm, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-GE-LH70-SM1490-BIDI |
Tx: 1490 nm Rx: 1550 nm |
LC |
9/125 µm, SMF |
N/A |
70 km (43.50 miles) |
|
|
SFP-GE-LH70-SM1550-BIDI |
Tx: 1550 nm Rx: 1490 nm |
LC |
9/125 µm, SMF |
N/A |
70 km (43.50 miles) |
|
|
SFP-GE-LH40-SM1310-BIDI |
Tx: 1310 nm Rx: 1550 nm |
LC |
9/125 µm, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP-GE-LH40-SM1550-BIDI |
Tx: 1550 nm Rx: 1310 nm |
LC |
9/125 µm, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP copper cable |
SFP-STACK-Kit |
N/A |
N/A |
SFP copper cable |
N/A |
1.5 m (4.92 ft) |
|
|
IMPORTANT: The SFP-GE-LX-SM1310-BIDI and SFP-GE-LX-SM1490-BIDI transceiver modules, the SFP-GE-LX-SM1310-BIDI-I and SFP-GE-LX-SM1490-BIDI-I transceiver modules, the SFP-GE-LH70-SM1490-BIDI and SFP-GE-LH70-SM1550-BIDI transceiver modules, and the SFP-GE-LH40-SM1310-BIDI and SFP-GE-LH40-SM1550-BIDI transceiver modules must be used in pairs. For example, if one end uses the SFP-GE-LX-SM1310-BIDI transceiver module, the other end must use the SFP-GE-LX-SM1490-BIDI transceiver module. |
Table6-7 GE SFP transceiver modules and cables available for the SFP+ ports (2)
|
Trans- |
Transceiver
module/ |
Central wavelength |
Connec- |
Cable
specifica- |
Mode band- |
Maximum
trans- |
|
SFP copper transceiver module |
SFP-GE-T |
N/A |
RJ-45 |
Twisted pair cable |
N/A |
100 m (328.08 ft) |
|
SFP transceiver module |
SFP-GE-SX-MM850-A |
850 nm |
LC |
50/125 µm, MMF |
500 |
550 m (1804.46 ft) |
|
400 |
500 m (1640.42 ft) |
|||||
|
62.5/125 µm, MMF |
200 |
275 m (902.23 ft) |
||||
|
160 |
220 m (721.78 ft) |
|||||
|
SFP-GE-LX-SM1310-A |
1310 nm |
LC |
9/125 µm, SMF |
N/A |
10 km (6.21 miles) |
|
|
50/125 µm, MMF |
500/400 |
550 m (1804.46 ft) |
||||
|
62.5/125 µm, MMF |
500 |
550 m (1804.46 ft) |
||||
|
SFP-GE-LX10-SM1310 |
1310 nm |
LC |
9/125 µm, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-GE-LH20-SM1310-I |
1310 nm |
LC |
9/125 µm, SMF |
N/A |
20 km (12.43 miles) |
|
|
SFP-GE-LH40-SM1310-I |
1310 nm |
LC |
9/125 µm, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP-GE-LH40-SM1310 |
1310 nm |
LC |
9/125 µm, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP-GE-LH40-SM1550 |
1550 nm |
LC |
9/125 µm, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP-GE-LH80-SM1550 |
1550 nm |
LC |
9/125 µm, SMF |
N/A |
80 km (49.71 miles) |
|
|
SFP-GE-LH100-SM1550 |
1550 nm |
LC |
9/125 µm, SMF |
N/A |
100 km (62.14 miles) |
|
|
SFP-GE-LX-SM1310-BIDI |
Tx: 1310 nm Rx: 1490 nm |
LC |
9/125 µm, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-GE-LX-SM1490-BIDI |
Tx: 1490 nm Rx: 1310 nm |
LC |
9/125 µm, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-GE-LX-SM1310-BIDI-I |
Tx: 1310 nm Rx: 1490 nm |
LC |
9/125 µm, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-GE-LX-SM1490-BIDI-I |
Tx: 1490 nm Rx: 1310 nm |
LC |
9/125 µm, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-GE-LH70-SM1490-BIDI |
Tx: 1490 nm Rx: 1550 nm |
LC |
9/125 µm, SMF |
N/A |
70 km (43.50 miles) |
|
|
SFP-GE-LH70-SM1550-BIDI |
Tx: 1550 nm Rx: 1490 nm |
LC |
9/125 µm, SMF |
N/A |
70 km (43.50 miles) |
|
|
SFP-GE-LH40-SM1310-BIDI |
Tx: 1310 nm Rx: 1550 nm |
LC |
9/125 µm, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP-GE-LH40-SM1550-BIDI |
Tx: 1550 nm Rx: 1310 nm |
LC |
9/125 µm, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP copper cable |
SFP-STACK-Kit |
N/A |
N/A |
SFP copper cable |
N/A |
1.5 m (4.92 ft) |
|
|
IMPORTANT: The SFP-GE-LX-SM1310-BIDI and SFP-GE-LX-SM1490-BIDI transceiver modules, the SFP-GE-LX-SM1310-BIDI-I and SFP-GE-LX-SM1490-BIDI-I transceiver modules, the SFP-GE-LH70-SM1490-BIDI and SFP-GE-LH70-SM1550-BIDI transceiver modules, and the SFP-GE-LH40-SM1310-BIDI and SFP-GE-LH40-SM1550-BIDI transceiver modules must be used in pairs. For example, if one end uses the SFP-GE-LX-SM1310-BIDI transceiver module, the other end must use the SFP-GE-LX-SM1490-BIDI transceiver module. |
Table6-8 2.5G transceiver modules available for the SFP+ ports
|
Transceiver module model |
Transceiver module model |
Central wavelength |
Connec |
Cable
specifica- |
Mode band- |
Maximum
trans- |
|
2.5G SFP transceiver module |
SFP-2.5G-LX10-SM1310-DR |
1310 nm |
LC |
9/125 µm, SMF |
N/A |
10 km (6.21 miles) |
|
SFP-2.5G-LX10-SM1310-DR-L |
1310 nm |
LC |
9/125 µm, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-2.5G-LX03-SM1490-BIDI |
Tx: 1490 nm Rx: 1310 nm |
LC |
9/125 µm, SMF |
N/A |
3 km (1.86 miles) |
|
|
SFP-2.5G-LX03-SM1310-BIDI |
Tx: 1310 nm Rx: 1490 nm |
LC |
9/125 µm, SMF |
N/A |
3 km (1.86 miles) |
|
|
IMPORTANT: The SFP-2.5G-LX03-SM1490-BIDI and SFP-2.5G-LX03-SM1310-BIDI transceiver modules must be used in pairs. For example, if one end uses the SFP-2.5G-LX03-SM1490-BIDI transceiver module, the other end must use the SFP-2.5G-LX03-SM1310-BIDI transceiver module. |
Table6-9 10GE SFP+ transceiver modules and cables available for the SFP+ ports (1)
|
Trans- |
Transceiver
module/ |
Central wavelength |
Connec- |
Cable
specifica- |
Mode band- |
Maximum
trans- |
|
SFP+ transceiver module |
SFP-XG-SX-MM850-D |
850 nm |
LC |
50/125 µm, MMF |
2000 |
300 m (984.25 ft) |
|
500 |
82 m (269.03 ft) |
|||||
|
400 |
66 m (216.54 ft) |
|||||
|
62.5/125 µm, MMF |
200 |
33 m (108.27 ft) |
||||
|
160 |
26 m (85.30 ft) |
|||||
|
SFP-XG-LX-SM1310 |
1310 nm |
LC |
9/125 µm, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-XG-LX-SM1310-D |
1310 nm |
LC |
9/125 µm, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-XG-LH40-SM1550 |
1550 nm |
LC |
9/125 µm, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP-XG-LH40-SM1550-D |
1550 nm |
LC |
9/125 µm, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP-XG-LH80-SM1550 |
1550 nm |
LC |
9/125 µm, SMF |
N/A |
80 km (49.71 miles) |
|
|
SFP-XG-LH80-SM1550-D |
1550 nm |
LC |
9/125 µm, SMF |
N/A |
80 km (49.71 miles) |
|
|
SFP-XG-CPRI-IR-SM1310 |
1310 nm |
LC |
9/125 µm, SMF |
N/A |
1.4 km (0.87 miles) |
|
|
SFP-XG-CPRI-LR-SM1310 |
1310 nm |
LC |
9/125 µm, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-XG-LX-SM1270-BIDI |
Tx: 1270 nm Rx: 1330 nm |
LC |
9/125 µm, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-XG-LX-SM1330-BIDI |
Tx: 1330 nm Rx: 1270 nm |
LC |
9/125 µm, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-XG-LH40-SM1270-BIDI |
Tx: 1270 nm Rx: 1330 nm |
LC |
9/125 µm, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP-XG-LH40-SM1330-BIDI |
Tx: 1330 nm Rx: 1270 nm |
LC |
9/125 µm, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP-XG-LH80-SM1490-BIDI |
Tx: 1490 nm Rx: 1550 nm |
LC |
9/125 µm, SMF |
N/A |
80 km (49.71 miles) |
|
|
SFP-XG-LH80-SM1550-BIDI |
Tx: 1550 nm Rx: 1490 nm |
LC |
9/125 µm, SMF |
N/A |
80 km (49.71 miles) |
|
|
SFP+ copper cable |
LSWM1STK |
N/A |
N/A |
SFP+ copper cable |
N/A |
0.65 m (2.13 ft) |
|
LSWM2STK |
1.2 m (3.94 ft) |
|||||
|
LSWM3STK |
3 m (9.84 ft) |
|||||
|
LSTM1STK |
5 m (16.40 ft) |
|||||
|
SFP+ fiber cable |
SFP-XG-D-AOC-7M |
N/A |
N/A |
SFP+ fiber cable |
N/A |
7 m (22.97 ft) |
|
SFP-XG-D-AOC-10M |
10 m (32.81 ft) |
|||||
|
SFP-XG-D-AOC-20M |
20 m (65.62 ft) |
|
|
IMPORTANT: The SFP-XG-LX-SM1270-BIDI and SFP-XG-LX-SM1330-BIDI transceiver modules, the SFP-XG-LH40-SM1270-BIDI and SFP-XG-LH40-SM1330-BIDI transceiver modules, and the SFP-XG-LH80-SM1490-BIDI and SFP-XG-LH80-SM1550-BIDI transceiver modules must be used in pairs. For example, if one end uses the SFP-XG-LX-SM1270-BIDI transceiver module, the other end must use the SFP-XG-LX-SM1330-BIDI transceiver module. |
Table6-10 10GE SFP+ transceiver modules and cables available for the SFP+ ports (2)
|
Transceiver
module/ |
Transceiver
module/ |
Central
wave- |
Connec |
Cable
specifica |
Mode bandwidth (MHz*km) |
Maximum
trans- |
|
SFP+ copper transceiver module |
SFP-10GE-T |
N/A |
RJ-45 |
Category 6a STP/Category 7 twisted pair cable |
N/A |
30 m (98.43 ft) |
|
SFP+ transceiver module |
SFP-XG-SX-MM850-D |
850 nm |
LC |
50/125 µm, MMF |
2000 |
300 m (984.25 ft) |
|
500 |
82 m (269.03 ft) |
|||||
|
400 |
66 m (216.54 ft) |
|||||
|
62.5/125 µm, MMF |
200 |
33 m (108.27 ft) |
||||
|
160 |
26 m (85.30 ft) |
|||||
|
SFP-XG-LX-SM1310-D |
1310 nm |
LC |
9/125 µm, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-XG-LH40-SM1550 |
1550 nm |
LC |
9/125 µm, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP-XG-LH80-SM1550 |
1550 nm |
LC |
9/125 µm, SMF |
N/A |
80 km (49.71 miles) |
|
|
SFP-XG-CPRI-IR-SM1310 |
1310 nm |
LC |
9/125 µm, SMF |
N/A |
1.4 km (0.87 miles) |
|
|
SFP-XG-CPRI-LR-SM1310 |
1310 nm |
LC |
9/125 µm, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-XG-LX-SM1270-BIDI |
Tx: 1270 nm Rx: 1330 nm |
LC |
9/125 µm, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-XG-LX-SM1330-BIDI |
Tx: 1330 nm Rx: 1270 nm |
LC |
9/125 µm, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-XG-LH40-SM1270-BIDI |
Tx: 1270 nm Rx: 1330 nm |
LC |
9/125 µm, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP-XG-LH40-SM1330-BIDI |
Tx: 1330 nm Rx: 1270 nm |
LC |
9/125 µm, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP-XG-LH80-SM1490-BIDI |
Tx: 1490 nm Rx: 1550 nm |
LC |
9/125 µm, SMF |
N/A |
80 km (49.71 miles) |
|
|
SFP-XG-LH80-SM1550-BIDI |
Tx: 1550 nm Rx: 1490 nm |
LC |
9/125 µm, SMF |
N/A |
80 km (49.71 miles) |
|
|
SFP+ copper cable |
LSWM1STK |
N/A |
N/A |
SFP+ copper cable |
N/A |
0.65 m (2.13 ft) |
|
LSWM2STK |
1.2 m (3.94 ft) |
|||||
|
LSWM3STK |
3 m (9.84 ft) |
|||||
|
LSTM1STK |
5 m (16.40 ft) |
|||||
|
SFP+ fiber cable |
SFP-XG-D-AOC-7M |
N/A |
N/A |
SFP+ fiber cable |
N/A |
7 m (22.97 ft) |
|
SFP-XG-D-AOC-10M |
10 m (32.81 ft) |
|||||
|
SFP-XG-D-AOC-20M |
20 m (65.62 ft) |
|
|
IMPORTANT: The SFP-XG-LX-SM1270-BIDI and SFP-XG-LX-SM1330-BIDI transceiver modules, the SFP-XG-LH40-SM1270-BIDI and SFP-XG-LH40-SM1330-BIDI transceiver modules, and the SFP-XG-LH80-SM1490-BIDI and SFP-XG-LH80-SM1550-BIDI transceiver modules must be used in pairs. For example, if one end uses the SFP-XG-LX-SM1270-BIDI transceiver module, the other end must use the SFP-XG-LX-SM1330-BIDI transceiver module. |
|
|
NOTE: · As a best practice, use H3C transceiver modules and cables for the switch. · The H3C transceiver modules and cables are subject to change over time. For the most recent list of H3C transceiver modules and cables, contact your H3C Support or marketing staff. · For the specifications of H3C transceiver modules and cables, see H3C Transceiver Modules User Guide. |
H3C provides users with SFP+ cables of different lengths. For more information, see Table6-9. For the cable appearance, see Table6-1.
Figure6-1 SFP+ copper cable
|
(1) Connector |
(2) Pull latch |
SFP28 port
Table6-11 SFP port specifications
|
Item |
Specification |
|
Port type |
SFP28 port |
|
Available transceiver modules and cables |
· GE SFP transceiver modules and cables described in Table6-12 · 10GE SFP+ transceiver modules and cables described in Table6-13 · SFP28 transceiver modules and cables described in Table6-14 |
|
Restrictions and guidelines |
· SFP28 ports do not support autonegotiation and operate at 25 Gbps by default. To change the speed to 10 Gbps, use the port-mode slot command to specify the 1/10-Gbps dual-rate mode for the ports. After configuration, all SFP28 ports will operate at 10 Gbps. · When an SFP port uses a GE transceiver module to connect to the peer end, make sure the peer end is configured with the speed 1000 and duplex full commands. · To use transceiver modules with a maximum transmission distance greater than or equal to 80 km (49.71 miles) or GE SFP copper transceiver modules, make sure the operating temperature does not exceed 40°C (104°F). · To use 10GE copper transceiver modules, make sure the transceiver modules are not installed in adjacent ports and the operating temperature does not exceed 40°C (104°F). |
|
Compatible switch models |
S6510-2C |
Table6-12 GE SFP transceiver modules and cables available for the SFP28 ports
|
Trans- |
Trans- |
Central
wave- |
Connec- |
Cable specifications |
Mode bandwidth (MHz*km) |
Maximum
trans- |
|
SFP copper transceiver module |
SFP-GE-T |
N/A |
RJ-45 |
Twisted pair cable |
N/A |
100 m (328.08 ft) |
|
SFP transceiver module |
SFP-GE-SX-MM850-A |
850 nm |
LC |
50/125 µm, MMF |
500 |
550 m (1804.46 ft) |
|
400 |
500 m (1640.42 ft) |
|||||
|
62.5/125 µm, MMF |
200 |
275 m (902.23 ft) |
||||
|
160 |
220 m (721.78 ft) |
|||||
|
SFP-GE-LX-SM1310-A |
1310 nm |
LC |
9/125 µm, SMF |
N/A |
10 km (6.21 miles) |
|
|
50/125 µm, MMF |
500/400 |
550 m (1804.46 ft) |
||||
|
62.5/125 µm, MMF |
500 |
550 m (1804.46 ft) |
||||
|
SFP-GE-LX10-SM1310 |
1310 nm |
LC |
9/125 µm, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-GE-LH20-SM1310-I |
1310 nm |
LC |
9/125 µm, SMF |
N/A |
20 km (12.43 miles) |
|
|
SFP-GE-LH40-SM1310-I |
1310 nm |
LC |
9/125 µm, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP-GE-LH40-SM1310 |
1310 nm |
LC |
9/125 µm, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP-GE-LH40-SM1550 |
1550 nm |
LC |
9/125 µm, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP-GE-LH80-SM1550 |
1550 nm |
LC |
9/125 µm, SMF |
N/A |
80 km (49.71 miles) |
|
|
SFP-GE-LH100-SM1550 |
1550 nm |
LC |
9/125 µm, SMF |
N/A |
100 km (62.14 miles) |
|
|
SFP-GE-LX-SM1310-BIDI |
Tx: 1310 nm Rx: 1490 nm |
LC |
9/125 µm, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-GE-LX-SM1490-BIDI |
Tx: 1490 nm Rx: 1310 nm |
LC |
9/125 µm, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-GE-LX-SM1310-BIDI-I |
Tx: 1310 nm Rx: 1490 nm |
LC |
9/125 µm, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-GE-LX-SM1490-BIDI-I |
Tx: 1490 nm Rx: 1310 nm |
LC |
9/125 µm, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-GE-LH70-SM1490-BIDI |
Tx: 1490 nm Rx: 1550 nm |
LC |
9/125 µm, SMF |
N/A |
70 km (43.50 miles) |
|
|
SFP-GE-LH70-SM1550-BIDI |
Tx: 1550 nm Rx: 1490 nm |
LC |
9/125 µm, SMF |
N/A |
70 km (43.50 miles) |
|
|
SFP-GE-LH40-SM1310-BIDI |
Tx: 1310 nm Rx: 1550 nm |
LC |
9/125 µm, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP-GE-LH40-SM1550-BIDI |
Tx: 1550 nm Rx: 1310 nm |
LC |
9/125 µm, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP copper cable |
SFP-STACK-Kit |
N/A |
N/A |
SFP copper cable |
N/A |
1.5 m (4.92 ft) |
|
|
IMPORTANT: The SFP-GE-LX-SM1310-BIDI and SFP-GE-LX-SM1490-BIDI transceiver modules, the SFP-GE-LX-SM1310-BIDI-I and SFP-GE-LX-SM1490-BIDI-I transceiver modules, the SFP-GE-LH70-SM1490-BIDI and SFP-GE-LH70-SM1550-BIDI transceiver modules, and the SFP-GE-LH40-SM1310-BIDI and SFP-GE-LH40-SM1550-BIDI transceiver modules must be used in pairs. For example, if one end uses the SFP-GE-LX-SM1310-BIDI transceiver module, the other end must use the SFP-GE-LX-SM1490-BIDI transceiver module. |
Table6-13 10GE SFP+ transceiver modules and cables available for the SFP28 ports
|
Transceiver
module/ |
Transceiver
module/ |
Central
wave- |
Connec- tor type |
Cable
specifica |
Mode bandwidth (MHz*km) |
Maximum transmission distance |
|
SFP+ copper transceiver module |
SFP-10GE-T |
N/A |
RJ-45 |
Category 6a STP/Category 7 twisted pair cable |
N/A |
30 m (98.43 ft) |
|
SFP+ transceiver module |
SFP-XG-SX-MM850-D |
850 nm |
LC |
50/125 µm, MMF |
2000 |
300 m (984.25 ft) |
|
500 |
82 m (269.03 ft) |
|||||
|
400 |
66 m (216.54 ft) |
|||||
|
62.5/125 µm, MMF |
200 |
33 m (108.27 ft) |
||||
|
160 |
26 m (85.30 ft) |
|||||
|
SFP-XG-LX-SM1310-D |
1310 nm |
LC |
9/125 µm, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-XG-LH40-SM1550 |
1550 nm |
LC |
9/125 µm, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP-XG-LH80-SM1550 |
1550 nm |
LC |
9/125 µm, SMF |
N/A |
80 km (49.71 miles) |
|
|
SFP-XG-CPRI-IR-SM1310 |
1310 nm |
LC |
9/125 µm, SMF |
N/A |
1.4 km (0.87 miles) |
|
|
SFP-XG-CPRI-LR-SM1310 |
1310 nm |
LC |
9/125 µm, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-XG-LX-SM1270-BIDI |
Tx: 1270 nm Rx: 1330 nm |
LC |
9/125 µm, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-XG-LX-SM1330-BIDI |
Tx: 1330 nm Rx: 1270 nm |
LC |
9/125 µm, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-XG-LH40-SM1270-BIDI |
Tx: 1270 nm Rx: 1330 nm |
LC |
9/125 µm, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP-XG-LH40-SM1330-BIDI |
Tx: 1330 nm Rx: 1270 nm |
LC |
9/125 µm, SMF |
N/A |
40 km (24.86 miles) |
|
|
SFP-XG-LH80-SM1490-BIDI |
Tx: 1490 nm Rx: 1550 nm |
LC |
9/125 µm, SMF |
N/A |
80 km (49.71 miles) |
|
|
SFP-XG-LH80-SM1550-BIDI |
Tx: 1550 nm Rx: 1490 nm |
LC |
9/125 µm, SMF |
N/A |
80 km (49.71 miles) |
|
|
SFP+ copper cable |
LSWM1STK |
N/A |
N/A |
SFP+ copper cable |
N/A |
0.65 m (2.13 ft) |
|
LSWM2STK |
1.2 m (3.94 ft) |
|||||
|
LSWM3STK |
3 m (9.84 ft) |
|||||
|
LSTM1STK |
5 m (16.40 ft) |
|||||
|
SFP+ fiber cable |
SFP-XG-D-AOC-7M |
N/A |
N/A |
SFP+ fiber cable |
N/A |
7 m (22.97 ft) |
|
SFP-XG-D-AOC-10M |
10 m (32.81 ft) |
|||||
|
SFP-XG-D-AOC-20M |
20 m (65.62 ft) |
|
|
IMPORTANT: The SFP-XG-LX-SM1270-BIDI and SFP-XG-LX-SM1330-BIDI transceiver modules, the SFP-XG-LH40-SM1270-BIDI and SFP-XG-LH40-SM1330-BIDI transceiver modules, and the SFP-XG-LH80-SM1490-BIDI and SFP-XG-LH80-SM1550-BIDI transceiver modules must be used in pairs. For example, if one end uses the SFP-XG-LX-SM1270-BIDI transceiver module, the other end must use the SFP-XG-LX-SM1330-BIDI transceiver module. |
Table6-14 SFP28 transceiver modules and cables available for the SFP28 ports
|
Transceiver module/cable type |
Transceiver module/cable model |
Central wavelength |
Connector type |
Cable specifications |
Mode bandwidth (MHz*km) |
Maximum transmission distance |
|
SFP28 transceiver module |
SFP-25G-SR-MM850 |
850 nm |
LC |
50/125 µm, MMF |
2000 |
70 m (229.66 ft) |
|
4700 |
100 m (328.08 ft) |
|||||
|
SFP-25G-SR-MM850-H |
850 nm |
LC |
50/125 µm, MMF |
2000 |
70 m (229.66 ft) |
|
|
4700 |
100 m (328.08 ft) |
|||||
|
SFP-25G-LR-SM1310 |
1310 nm |
LC |
9/125 µm, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-25G-LR-SM1310-I |
1310 nm |
LC |
9/125 µm, SMF |
N/A |
10 km (6.21 miles) |
|
|
SFP-25G-CSR-MM850 |
850 nm |
LC |
50/125 µm, MMF |
2000 |
200 m (656.17 ft) |
|
|
> 3500 |
300 m (984.25 ft) |
|||||
|
> 5500 |
400 m (1312.34 ft) |
|||||
|
SFP28 copper cable |
SFP-25G-D-CAB-1M |
N/A |
N/A |
25G SFP28 copper cable |
N/A |
1 m (3.28 ft) |
|
SFP-25G-D-CAB-3M |
3 m (9.84 ft) |
|||||
|
SFP-25G-D-CAB-5M |
5 m (16.40 ft) |
|||||
|
SFP28 fiber cable |
SFP-25G-D-AOC-3M |
N/A |
N/A |
25G SFP28 fiber cable |
N/A |
3 m (9.84 ft) |
|
SFP-25G-D-AOC-5M |
5 m (16.40 ft) |
|||||
|
SFP-25G-D-AOC-7M |
7 m (22.97 ft) |
|||||
|
SFP-25G-D-AOC-10M |
10 m (32.81 ft) |
|||||
|
SFP-25G-D-AOC-20M |
20 m (65.62 ft) |
|
|
NOTE: · As a best practice, use H3C transceiver modules and cables for the switch. · The H3C transceiver modules and cables are subject to change over time. For the most recent list of H3C transceiver modules and cables, contact your H3C Support or marketing staff. · For the specifications of H3C transceiver modules and cables, see H3C Transceiver Modules User Guide. |
QSFP+ port
The S6510-50QS switch provides two QSFP+ ports on its front panel. You can install the QSFP+ transceiver modules and cables in Table6-15 as needed.
Table6-15 QSFP+ transceiver modules and cables available for the QSFP+ ports
|
Transceiver
module/ |
Transceiver
module/ |
Central
wave- |
Connec- |
Cable
specifica |
Mode bandwidth (MHz*km) |
Maximum transmission distance |
|
QSFP+ transceiver module |
QSFP-40G-SR4-MM850 |
850 nm |
MPO |
50/125 µm, MMF |
2000 |
100 m (328.08 ft) |
|
4700 |
150 m (492.12 ft) |
|||||
|
QSFP-40G-CSR4-MM850 |
850 nm |
MPO |
50/125 µm, MMF |
2000 |
300 m (984.25 ft) |
|
|
4700 |
400 m (1312.33 ft) |
|||||
|
QSFP-40G-BIDI-SR-MM850 |
Two lanes: · 850 nm · 900 nm |
LC |
50/125 µm, MMF |
2000 |
100 m (328.08 ft) |
|
|
4700 |
150 m (492.12 ft) |
|||||
|
QSFP-40G-BIDI-WDM850 |
Four lanes: · 850 nm · 880 nm · 910 nm · 940 nm |
LC |
50/125 µm, MMF |
2000 |
240 m (787.40ft) |
|
|
4700 |
350 m (1148.29 ft) |
|||||
|
QSFP-40G-LR4-WDM1300 |
Four lanes: · 1271 nm · 1291 nm · 1311 nm · 1331 nm |
LC |
9/125 µm, SMF |
N/A |
10 km (6.21 miles) |
|
|
QSFP-40G-LR4-PSM1310 |
1310 nm |
MPO |
9/125 µm, SMF |
N/A |
10 km (6.21 miles) |
|
|
QSFP-40G-LR4L-WDM1300 |
Four lanes: · 1271 nm · 1291 nm · 1311 nm · 1331 nm |
LC |
9/125 µm, SMF |
N/A |
2 km (1.24 miles) |
|
|
QSFP-40G-ER4-WDM1300 |
Four lanes: · 1271 nm · 1291 nm · 1311 nm · 1331 nm |
LC |
9/125 µm, SMF |
N/A |
40 km (24.86 miles) |
|
|
QSFP+ copper cable |
LSWM1QSTK0 |
N/A |
N/A |
40G QSFP+ copper cable |
N/A |
1 m (3.28 ft) |
|
LSWM1QSTK1 |
3 m (9.84 ft) |
|||||
|
LSWM1QSTK2 |
5 m (16.40 ft) |
|||||
|
QSFP+ fiber cable |
QSFP-40G-D-AOC-3M |
N/A |
N/A |
40G QSFP+ fiber cable |
N/A |
3 m (9.84 ft) |
|
QSFP-40G-D-AOC-7M |
7 m (22.97 ft) |
|||||
|
QSFP-40G-D-AOC-10M |
10 m (32.81 ft) |
|||||
|
QSFP-40G-D-AOC-20M |
20 m (65.62 ft) |
|
|
NOTE: · As a best practice, use H3C transceiver modules and cables for the switch. · The H3C transceiver modules and cables are subject to change over time. For the most recent list of H3C transceiver modules and cables, contact your H3C Support or marketing staff. · For the specifications of H3C transceiver modules and cables, see H3C Transceiver Modules User Guide. |
Figure6-2 40G QSFP+ copper cable
|
(1) Connector |
(2) Pull latch |
10/100/1000BASE-T autosensing Ethernet port
Table6-16 10/100/1000BASE-T autosensing Ethernet port specifications
|
Item |
Specification |
|
Connector type |
RJ-45 |
|
Transmission rate, duplex mode, and auto MDI/MDI-X |
· 10 Mbps, half/full duplex · 100 Mbps, half/full duplex · 1000 Mbps, full duplex · MDI/MDI-X autosensing |
|
Maximum transmission distance |
100 m (328.08 ft) |
|
Transmission medium |
Category 5 and above twisted pair cable |
|
Compliant standard |
IEEE 802.3i, 802.3u, 802.3ab |
|
Compatible switch models |
S6510-50QS |
LEDs
System status LED
Through the system status LED, you can preliminarily determine the operating state of the switch. For more information, see Table6-17.
Table6-17 System status LED description
|
LED mark |
Status |
Description |
|
SYS |
Steady green |
The switch is operating correctly. |
|
Flashing green (1 Hz) |
The switch is performing power-on self test (POST). |
|
|
Steady red |
The switch has failed POST or the switch is faulty. |
|
|
Off |
The switch is powered off. |
Power supply status LED
Table6-18 Power supply status LED description
|
LED mark |
Status |
Description |
|
PWR1/PWR2 |
Steady green |
A power supply is installed in the power supply slot, and the power supply is operating correctly. |
|
Steady yellow |
A power supply is installed in the power supply slot, but the power supply is not operating or has failed. |
|
|
Off |
No power supply is installed in the power supply slot. |
Interface module status LED
The S6510-2C switch provides two interface module status LEDs on the front panel to indicate the operating state of the interface modules in slot 1 and slot 2, respectively.
Table6-19 Interface module status LED description
|
Switch model |
LED mark |
Status |
Description |
|
S6510-2C |
SLOT1/SLOT2 |
Steady green |
The interface module is present and is operating correctly. |
|
Flashing yellow |
The switch does not support the interface module, or the interface module has failed. |
||
|
Off |
No interface module is installed in the interface module slot. |
Port mode LED
To show more information about the switch through the port status LEDs, the S6510-50QS switch provides a mode LED (MODE) to indicate the type of information that the port status LEDs are showing.
You can use the mode button to change the indication of the mode LED (MODE).
Table6-20 Port mode LED description
|
Switch model |
LED mark |
LED status |
Description |
|
S6510-50QS |
MODE |
Steady green |
The port LEDs are showing the link state of the ports. |
|
Flashing yellow |
The port LEDs work in conjunction to indicate the IRF member ID of the switch. For example, if the LED for port 4 is steady green, the IRF member ID of the switch is 4. |
||
|
Steady yellow |
The port LEDs are showing the duplex mode of the ports. |
Management Ethernet port LED
Table6-21 Management Ethernet port LED description
|
LED mark |
LED status |
Description |
|
ACT/LINK |
Steady green |
A link is present on the port. |
|
Flashing green |
The port is sending or receiving data. |
|
|
Off |
No link is present on the port. |
ID LED
Table6-22 ID LED description
|
Switch model |
LED mark |
LED status |
Description |
|
S6510-2C |
ID |
Flashing blue |
Helps identifying the switch. NOTE: To identify the switch location, execute the locator blink blink-time command. This LED will flash blue. |
10/100/1000BASE-T autosensing Ethernet port LED
The S6510-50QS switch provides a status LED for each 10/100/1000BASE-T autosensing Ethernet port. The port LEDs and the mode LED work in conjunction to indicate the operating status of the 10/100/1000BASE-T autosensing Ethernet ports.
Table6-23 10/100/1000BASE-T autosensing Ethernet port LED description
|
Switch model |
Mode LED status |
10/100/1000BASE-T autosensing Ethernet port LED status |
Description |
|
S6510-50QS |
Steady green (rate mode) |
Steady green |
A link is present on the port and the port is operating at 10/100/1000 Mbps. |
|
Flashing green |
The port is sending or receiving data at 10/100/1000 Mbps. |
||
|
Off |
No link is present on the port. |
||
|
Flashing yellow (IRF mode) |
Steady green |
The port LEDs work in conjunction to indicate the IRF member ID of the switch. For example, if the LED for port 4 is steady green, the IRF member ID of the switch is 4. |
|
|
Steady yellow (duplex mode) |
Steady green |
The port is operating in full/half duplex mode. |
|
|
Off |
No link is present on the port. |
SFP+ port LED
Table6-24 SFP+ port LED description
|
Switch model |
LED status |
Description |
|
|
Mode LED status (MODE) |
SFP+ port LED status |
||
|
S6510-50QS |
Steady green (rate mode) |
Steady green |
A link is present on the port and the port is operating at 1/10 Gbps. |
|
Flashing green |
The port is sending or receiving data at 1/10 Gbps. |
||
|
Off |
No link is present on the port. |
||
|
Flashing yellow (IRF mode) |
Off |
The mode LED is operating in IRF mode. |
|
|
Steady yellow (duplex mode) |
Steady green |
The port is operating in full/half duplex mode. |
|
|
Off |
No link is present on the port. |
||
|
S6510-2C |
Steady green |
A link is present on the port and the port is operating at 10 Gbps. |
|
|
Flashing green |
The port is sending or receiving data at 10 Gbps. |
||
|
Steady yellow |
A link is present on the port and the port is operating at 1/2.5 Gbps. |
||
|
Flashing yellow |
The port is sending or receiving data at 1/2.5 Gbps. |
||
|
Off |
No module is installed or no link is present on the port. |
||
SFP28 port LED
Table6-25 SFP28 port LED description
|
Switch model |
SFP28 port LED status |
Description |
|
S6510-2C |
Steady green |
A link is present on the port and the port is operating at 25 Gbps. |
|
Flashing green |
The port is sending or receiving data at 25 Gbps. |
|
|
Steady yellow |
A link is present on the port and the port is operating at 1/10 Gbps. |
|
|
Flashing yellow |
The port is sending or receiving data at 1/10 Gbps. |
|
|
Off |
No module is installed or no link is present on the port. |
QSFP+ port LED
Table6-26 QSFP+ port LED description
|
Switch model |
LED status |
Description |
|
|
Mode LED status (MODE) |
QSFP+ port LED status |
||
|
S6510-50QS |
Steady green (rate mode) |
Steady green |
A link is present on the port and the port is operating at 40 Gbps. |
|
Flashing green |
The port is sending or receiving data at 40 Gbps. |
||
|
Off |
No link is present on the port. |
||
|
Flashing yellow (IRF mode) |
Off |
The mode LED is operating in IRF mode. |
|
|
Steady yellow (duplex mode) |
Steady green |
The port is operating in full/half duplex mode. |
|
|
Off |
No link is present on the port. |
||
7 Buttons
Reset button
The S6510-2C switch provides one reset button on the front panel. For more information, see Table7-1.
Table7-1 Methods for using the reset button
|
Switch model |
Button |
Services |
|
S6510-2C |
Reset button |
· To restart the switch, press the button for no more than 5 seconds and release the button. · To restore the factory default and restart the switch, press and hold the button for over 5 seconds and release the button when the SYS LED flashes red rapidly (8 Hz). This operation only restarts the switch if the switch is an IRF member device. To restore the factory default with the reset button, you must first remove the switch from the IRF fabric. To enhance switch security and prevent factory default restoration caused by misuse of the reset button, execute the undo push-button reset enable command to disable the reset button. |
8 Cooling system
To dissipate heat timely and enhance system stability, the switch uses a high-performance cooling system. Consider the site ventilation design when you plan the installation site for the switch.
Table8-1 Cooling system
|
Switch model |
Fan type |
Airflow direction |
|
· S6510-50QS · S6510-2C |
Fixed fans |
Port side to power supply side (facing the front panel)
|
