Contents

VLAN mapping commands· 1

display vlan mapping· 1

vlan mapping· 2

 

VLAN mapping commands

display vlan mapping

Use display vlan mapping to display VLAN mapping information.

Syntax

display vlan mapping [ interface interface-type interface-number ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

interface interface-type interface-number: Specifies an interface by its type and number. If you do not specify an interface, the command displays VLAN mapping information on all interfaces.

Examples

# Display VLAN mapping information on all interfaces.

<Sysname> display vlan mapping

Interface Twenty-FiveGigE1/0/1:

  Outer VLAN    Inner VLAN    Translated Outer VLAN    Translated Inner VLAN

  10            N/A           120                      N/A

Interface Twenty-FiveGigE1/0/2:

  Outer VLAN    Inner VLAN    Translated Outer VLAN    Translated Inner VLAN

  1024-4094     N/A           100                      N/A

Interface Twenty-FiveGigE1/0/3:

  Outer VLAN    Inner VLAN    Translated Outer VLAN    Translated Inner VLAN

  12            N/A           110                      12

Interface Twenty-FiveGigE1/0/4:

  Outer VLAN    Inner VLAN    Translated Outer VLAN    Translated Inner VLAN

  11            30            130                      40

Table 1 Command output

Field	Description
Outer VLAN	Original outer VLAN. This field indicates the original VLAN for one-to-one VLAN mapping, many-to-one VLAN mapping, and one-to-two VLAN mapping.
Inner VLAN	Original inner VLAN. This field displays N/A for one-to-one VLAN mapping, many-to-one VLAN mapping, and one-to-two VLAN mapping.
Translated Outer VLAN	Translated outer VLAN. This field indicates the translated VLAN for one-to-one VLAN mapping and many-to-one VLAN mapping.
Translated Inner VLAN	Translated inner VLAN. This field displays N/A for one-to-one VLAN mapping and many-to-one VLAN mapping.

‌

Related commands

vlan mapping

vlan mapping

Use vlan mapping to configure VLAN mapping on an interface.

Use undo vlan mapping to cancel the VLAN mapping configuration.

Syntax

vlan mapping { vlan-id translated-vlan vlan-id | nest { range vlan-range-list | single vlan-id-list } nested-vlan vlan-id [ dot1p priority ] | tunnel outer-vlan-id inner-vlan-id translated-vlan outer-vlan-id inner-vlan-id | uni { range vlan-range-list | single vlan-id-list } translated-vlan vlan-id}

undo vlan mapping { vlan-id translated-vlan vlan-id | all | nest { range vlan-range-list | single vlan-id-list } nested-vlan vlan-id [ dot1p priority ] | tunnel outer-vlan-id inner-vlan-id translated-vlan outer-vlan-id inner-vlan-id | uni { range vlan-range-list | single vlan-id-list } translated-vlan vlan-id }

Default

No VLAN mapping is configured on an interface.

Views

Layer 2 Ethernet interface view

Layer 2 aggregate interface view

Predefined user roles

network-admin

Parameters

vlan-id translated-vlan vlan-id: Specifies the original VLAN and translated VLAN for a one-to-one VLAN mapping. The value range for the vlan-id argument is 1 to 4094. The original VLAN and the translated VLAN cannot be the same.

uni single vlan-id-list translated-vlan vlan-id: Specifies the original VLANs and the translated VLAN for a many-to-one VLAN mapping on the customer-side port. The vlan-id-list argument specifies a space-separated list of up to 32 VLAN IDs, each of which is in the range of 1 to 4094. The value range for the vlan-id argument is 1 to 4094. Any of the original VLANs cannot be the same as the translated VLAN.

nest range vlan-range-list nested-vlan vlan-id: Specifies the CVLAN ranges and the SVLAN for a one-to-two VLAN mapping. The vlan-range-list argument specifies a space-separated list of up to 32 CVLAN items. Each item specifies a CVLAN ID or a range of CVLAN IDs in the format of vlan-id1 to vlan-id2. The value range for CVLAN IDs is 1 to 4094. The value for the vlan-id2 argument must be greater than the value for the vlan-id1 argument. Different CVLAN ranges cannot overlap. The vlan-id argument specifies the SVLAN ID in the range of 1 to 4094.

nest single vlan-id-list nested-vlan vlan-id: Specifies the CVLANs and the SVLAN for a one-to-two VLAN mapping. The vlan-id-list argument specifies a space-separated list of up to 32 CVLAN IDs, each of which is in the range of 1 to 4094. The vlan-id argument specifies the SVLAN ID in the range of 1 to 4094.

dot1p priority: Specifies the 802.1p priority in the SVLAN tag added by a one-to-two VLAN mapping, in the range of 0 to 7. The default value is 0. A greater value represents a higher priority.

tunnel outer-vlan-id inner-vlan-id translated-vlan outer-vlan-id inner-vlan-id: Specifies the original outer VLAN ID, original inner VLAN ID, translated outer VLAN ID, and translated inner VLAN ID for a two-to-two VLAN mapping. The value ranges for the outer-vlan-id argument and the inner-vlan-id argument are both 1 to 4094.

all: Deletes all VLAN mapping configurations from the interface.

Usage guidelines

The original and translated VLANs in VLAN mappings on an interface must meet the following requirements:

·     Different types of VLAN mapping entries cannot include the same original VLANs or translated VLANs.

·     Different one-to-one or two-to-two VLAN mapping entries cannot include the same translated VLANs. If you configure multiple one-to-one or two-to-two VLAN mapping entries for the same original VLANs, only the first configuration takes effect.

The configuration restrictions between QinQ and VLAN mappings are as follows:

·     Before you enable or disable QinQ on a port, you must remove all VLAN mappings on the port.

·     You cannot configure two-to-two VLAN mappings on a QinQ-enabled port.

If you use both transparent VLANs and VLAN mappings on an interface, the transparent VLANs cannot be the following VLANs:

·     Original or translated VLANs of one-to-one, many-to-one, and one-to-two VLAN mappings.

·     Original or translated outer VLANs of two-to-two VLAN mappings.

The MTU of an interface is 1500 bytes by default. After a VLAN tag is added to a packet, the packet length is added by 4 bytes. As a best practice, set the MTU to a minimum of 1504 bytes for ports on the forwarding path of the packet on the service provider network.

Examples

# Configure a one-to-one VLAN mapping on Twenty-FiveGigE 1/0/1 to map VLAN 1 to VLAN 101.

<Sysname> system-view

[Sysname] interface twenty-fivegige 1/0/1

[Sysname-Twenty-FiveGigE1/0/1] vlan mapping 1 translated-vlan 101

# Configure many-to-one VLAN mappings on the customer-side port (Twenty-FiveGigE 1/0/2) to map VLANs 1 through 50 to VLAN 101.

<Sysname> system-view

[Sysname] interface twenty-fivegige 1/0/2

[Sysname-Twenty-FiveGigE1/0/2] vlan mapping uni range 1 to 50 translated-vlan 101

[Sysname-Twenty-FiveGigE1/0/2] quit

# Configure one-to-two VLAN mappings on Twenty-FiveGigE 1/0/4 to add SVLAN tag 101 to packets carrying VLAN tags 1 through 10 and VLAN tag 80.

<Sysname> system-view

[Sysname] interface twenty-fivegige 1/0/4

[Sysname-Twenty-FiveGigE1/0/4] vlan mapping nest range 1 to 10 nested-vlan 101

[Sysname-Twenty-FiveGigE1/0/4] vlan mapping nest single 80 nested-vlan 101

# Configure a two-to-two VLAN mapping on Twenty-FiveGigE1/0/5 to map SVLAN 101 and CVLAN 1 to SVLAN 201 and CVLAN 10.

<Sysname> system-view

[Sysname] interface twenty-fivegige 1/0/5

[Sysname-Twenty-FiveGigE1/0/5] vlan mapping tunnel 101 1 translated-vlan 201 10

Related commands

display vlan mapping