1 Appendix A  Technical specifications, LEDs, and ports

Dimensions (H × W × D)

260 × 260 × 84 mm (10.24 × 10.24 × 3.11 in)

Weight

2.1 kg (4.63 lb)

System power consumption

50 W

Antenna

·     2.4GHz peak gain: 6.8dBi

·     5GHz peak gain: 7.2dBi

·     6GHz peak gain: 7.3dBi

Note: The equivalent antenna gain is 4.7dBi in 6GHz, 4.3dBi in 5GHz and 4.0dBi in 2.4GHz

Protocol

IEEE802.11a/b/g/n/ac/ax/be

Off

No power is present or the LED has been turned off.

Yellow

Flashing (twice per second)

The Ethernet interfaces are down and no mesh links are established.

Steady on

The AP is initializing, or an initialization exception has occurred.

Green

Flashing (once every two seconds)

The AP has started up but has not registered to any AC.

Flashing (once per second)

Only the 2.4G radio has associated clients.

Flashing (twice per second)

The AP is upgrading the image.

Steady on

The AP has registered with an AC, but does not have any associated clients.

Blue

Flashing (once per second)

Only the 5G radio has associated clients.

Alternating between green and blue at 1 Hz

Both the 2.4G and 5G radios have associated clients.

Off

No power is present or the LED has been turned off.

Yellow

Steady on

The AP is initializing, or an initialization exception has occurred.

Flashing (twice per second)

The Ethernet interfaces are down and no mesh links are established.

Green

Steady on

The AP is in standby state, has connected to Cloudnet, but does not have any associated clients.

Flashing (once per second)

The AP has connected to Cloudnet, and the radios have associated clients.

Flashing (twice per second)

The AP is upgrading the image.

Blue

Steady on

The AP is in standby state, has not connected to Cloudnet, and does not have any associated clients.

Flashing (once per second)

The AP has not connected to Cloudnet, but the radios have associated clients.

Off

No power is present or the LED has been turned off.

Yellow

Steady on

The AP is initializing, or an initialization exception has occurred.

Flashing (twice per second)

The Ethernet interfaces are down and no mesh links are established.

Green

Steady on

The AP has started up and is in standby state, but does not have any associated clients.

Flashing (once per second)

Only the 2.4G radio has associated clients.

Flashing (twice per second)

The AP is upgrading the image.

Blue

Flashing (once per second)

Only the 5G radio has associated clients.

Alternating between green and blue

Flashing (once per second)

Both the 2.4G and 5G radios have associated clients.

0 to 5

Steady green

Reset the AP.

5 to 20

Flashing green (twice per second)

Restore to the factory defaults.

20 to 30

Yellow

Flashing (once every two seconds)

The AP is operating in fit AP mode.

NOTE:

The system will change the operating mode to cloud if you press and hold the button until the LED flashes green four times per second.

Flashing (twice per second)

The AP is operating in anchor AC mode.

Flashing (four times per second)

The AP is operating in cloud mode.

> 30

Yellow

Flashing (twice per second)

The AP is operating in anchor AC mode.

Flashing (four times per second)

The AP is operating in cloud mode.

Green

Flashing (four times per second)

Change the AP operating mode to cloud.

NOTE:

If you release the button, the AP will restart for the new mode to take effect.

10GE1/PoE++

·     IEEE802.3

·     IEEE802.3u

·     IEEE802.3bt

·     IEEE802.3at

·     IEEE802.3af

100M/1000M/2.5G/5G/10G Ethernet copper port that can act as an uplink port to connect to the Internet or MAN and as a standard PoE port at the same time.

When the AP operates in fit AP mode, the port is represented by interface 10GE1/0/1 in the MAP file and gigabitethernet 1 for configuration on the AC.

10GE2/P++SPF

·     IEEE802.3

·     SFP MSA

·     SFF-8427

1000M/2.5G/5G/10G hybrid copper-fiber port

GE/PSE

·     IEEE802.3

·     IEEE802.3u

10M/100M/1000M Ethernet copper port, used for connecting a downlink device. The AP can supply power through this port to a device with a maximum power consumption of 15 W.

When the AP operates in fit AP mode, the port is represented by interface GE1/0/1 in the MAP file and gigabitethernet 1 for configuration on the AC.

CONSOLE

RS/EIA-232

Used for device configuration and management by the maintenance personnel.

USB port

USB2.0

Used for charging as well as data reading or writing.

Reset button

N/A

For more information, see Table1-5.

Central wavelength

850 nm

Max transmission distance

550 m (1804.46 ft)

Data rate

1250 Mbps

Connector type

Duplex LC

Fiber mode

MMF

Fiber diameter

50 μm

Output optical power

–9.5 to 0 dBm

Receiver sensitivity

≤ –17 dBm

Light saturation

≤ –3 dBm

Central wavelength

1310 nm

Max transmission distance

10 km (6.21 miles)

Data rate

1250 Mbps

Connector type

Duplex LC

Fiber mode

SMF

Fiber diameter

9 μm

Output optical power

–9.5 to –3 dBm

Receiver sensitivity

≤ –20 dBm

Light saturation

≤ –3 dBm

Central wavelength

1310 nm

Max transmission distance

40 km (24.86 miles)

Data rate

1250 Mbps

Connector type

Duplex LC

Fiber mode

SMF

Fiber diameter

9 μm

Output optical power

–2 to +5 dBm

Receiver sensitivity

≤ –22 dBm

Light saturation

≤ –3 dBm

Central wavelength

1550 nm

Max transmission distance

40 km (24.86 miles)

Data rate

1250 Mbps

Connector type

Duplex LC

Fiber mode

SMF

Fiber diameter

9 μm

Output optical power

–4 to +1 dBm

Receiver sensitivity

≤ –21 dBm

Light saturation

≤ –3 dBm

Central wavelength

1310 nm

Max transmission distance

10 km (6.21 miles)

Data rate

1.25 Gbps

Connector type

LC connector

Max power consumption

1.0 W

Operating temperature range

–40ºC to +85ºC (–40°F to +185°F)

Output optical power

–9 to –1 dBm

Central wavelength

1310 nm

Max transmission distance

1.4 km (0.87 miles)

Data rate

10.3125 Gbps

Connector type

LC connector

Max power consumption

1.2 W

Operating temperature range

–40ºC to +85ºC (–40°F to +185°F)

Output optical power

–8.2 to +0.5 dBm