Contents

SQA commands· 1

application enable· 1

application interval 2

application name enable· 3

application statistics enable· 3

application statistics interval 4

display sqa profile· 5

sqa profile· 6

sqa-profile· 7

 

SQA commands

The following compatibility matrixes show the support of hardware platforms for SQA:

 

Hardware series	Model	Product code	SQA compatibility
WX2500X series	WX2560X WX2580X	EWP-WX2560X EWP-WX2580X	Yes
WX2500X-E series	WX2508X-E	EWP-WX2508X-E	Yes

 

Hardware series	Model	Product code	SQA compatibility
WX2500X-LI	WX2510X-LI WX2510X-PWR-LI WX2520X-LI WX2540X-LI WX2550X-LI WX2560X-LI WX2580X-LI	EWP-WX2510X-LI EWP-WX2510X-PWR-LI EWP-WX2520X-LI EWP-WX2540X-LI EWP-WX2550X-LI EWP-WX2560X-LI EWP-WX2580X-LI	Yes: ·     EWP-WX2520X-LI ·     EWP-WX2540X-LI ·     EWP-WX2550X-LI ·     EWP-WX2560X-LI ·     EWP-WX2580X-LI No: ·     EWP-WX2510X-LI ·     EWP-WX2510X-PWR-LI

 

Hardware series	Model	Product code	SQA compatibility
WX2800X series	WX2812X-PWR WX2860X WX2880X	EWP-WX2812X-PWR EWP-WX2860X EWP-WX2880X	Yes
WSG1800X series	WSG1808X-PWR WSG1808X-PWR WSG1812X-PWR WSG1840X	EWP-WSG1808X-PWR EWP-WSG1808X-PWR-JP EWP-WSG1812X-PWR EWP-WSG1840X	Yes

‌

application enable

Use application enable to enable SQA for an audio or video application.

Use undo application enable to disable SQA for an audio or video application.

Syntax

application app-name enable

undo application app-name enable

Default

SQA is disabled for all audio and video applications.

Views

SQA profile view

Predefined user roles

network-admin

Parameters

app-name: Specifies an audio or video application. You can use the application ？ command to obtain the list of supported audio or video applications.

Usage guidelines

After SQA is enabled, the service template bound to the SQA profile will analyze the audio and video traffic of wireless endpoints. The service template also collects and saves basic information (such as source and destination IP addresses) and quality information (such as delay and jitter) about the audio and video streams. The device can report the analysis data to a control terminal through NETCONF.

To enable SQA for multiple audio or video applications, you can execute this command multiple times.

Examples

# In SQA profile ssidcompany, enable SQA for the Tencent Meeting application.

<Sysname> system-view

[Sysname] sqa profile ssidcompany

[Sysname-sqa-profile-ssidcompany] application tencentmeeting enable

Related commands

sqa profile

application interval

Use application interval to specify the interval at which analysis data for audio and video applications is collected and sent.

Use undo application interval to restore the default.

Syntax

application interval interval

undo application interval

Default

Analysis data for audio and video applications is collected and sent at 300-second intervals.

Views

SQA profile view

Predefined user roles

network-admin

Parameters

interval: Specifies the interval at which analysis data for audio and video applications is collected and sent, in the range of 10 to 3600 seconds.

Usage guidelines

After SQA is enabled, APs will collect and send analysis data to the control terminal that subscribes to the data at the specified.

Examples

# In SQA profile ssidcompany, specify the interval for collecting and sending analysis data as 200 seconds.

<Sysname> system-view

[Sysname] sqa profile ssidcompany

[Sysname-sqa-profile-ssidcompany] application interval 200

Related commands

application enable

sqa profile

application name enable

Use application name enable to enable SQA for an application.

Use undo application name enable to disable SQA for an application.

Syntax

application name app-name enable

undo application name app-name enable

Default

SQA is disabled for an application.

Views

SQA profile view

Predefined user roles

network-admin

Parameters

app-name: Specifies an application. APR signature libraries of different versions support different applications. You can use the application name ？ command to obtain the list of applications supported by an APR signature library.

Usage guidelines

Application scenarios

APR signature libraries of different versions support different applications. You can use the application name ？ command to obtain the list of applications supported by an APR signature library.

Restrictions and guidelines

You can execute the application name app-name enable command multiple times to enable SQA for multiple applications.

This feature is supported only in wireless local forwarding scenarios.

Examples

# In SQA profile ssidcompany, enable SQA for the Tencent Meeting application.

<Sysname> system-view

[Sysname] sqa profile ssidcompany

[Sysname-sqa-profile-ssidcompany] application tencentmeeting enable

application statistics enable

Use application statistics enable to enable statistics collection for endpoint application traffic.

Use undo application statistics enable to disable statistics collection for endpoint application traffic.

Syntax

application statistics enable

undo application statistics enable

Default

Statistics collection for endpoint application traffic is disabled.

Views

SQA profile view

Predefined user roles

network-admin

Usage guidelines

After this command is executed, the service template bound to the SQA profile will collect traffic statistics on identifiable applications for wireless endpoints. The device can report the statistics to a control terminal through NETCONF. For information about NETCONF, see Network Management and Monitoring Configuration Guide.

Examples

# In SQA profile ssidcompany, enable statistics collection for endpoint application traffic.

<Sysname> system-view

[Sysname] sqa profile ssidcompany

[Sysname-sqa-profile-ssidcompany] application statistics enable

Related commands

sqa profile

application statistics interval

Use application statistics interval to specify the interval at which traffic statistics are collected and sent.

Use undo application statistics interval to restore the default.

Syntax

application statistics interval interval

undo application statistics interval

Default

Traffic statistics for endpoint applications is collected and sent at 5-minute intervals.

Views

SQA profile view

Predefined user roles

network-admin

Parameters

interval: Specifies the interval at which analysis data for traffic statistics for endpoint applications are collected and sent, in the range of 1 to 60 minutes.

Usage guidelines

After traffic statistics for endpoint applications is enabled, APs will collect and send traffic statistics to the control terminal that subscribes to the data at the specified.

Examples

# In SQA profile ssidcompany, specify the interval for collecting and sending traffic statistics as 4 minutes.

<Sysname> system-view

[Sysname] sqa profile ssidcompany

[Sysname-sqa-profile-ssidcompany] application statistics interval 4

Related commands

application statistics enable

sqa profile

display sqa profile

Use display sqa profile to display configuration information for SQA profiles.

Syntax

display sqa profile [ profile-name ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

profile-name: Specifies an SQA profile by its name, a case-insensitive string of 1 to 31 characters. If you do not specify an SQA profile, this command displays configuration information for all SQA profiles.

Examples

# Display configuration information for all SQA profiles.

<Sysname> display sqa profile

SQA profile information:

SQA profile name: ssidcompany1

  SIP: Enabled

  SQA-enabled video&audio apps: tencentmeeting, qq

  Application statistics: Enabled

  Application SQA interval: 300s

  Application statistics interval: 5min

  SQA-enabled applications: AirPlay, CiscoWebex, CiscoWebexMeetings, CloudRoom, DingT,

                            alk, DingTalkVoIP, FeiShu, HaoShiTong, HUAWEICloudWeLink,

                            TencentMeeting, XiaoYuYiLian, ZhuMuMeeting, Zoom

SQA profile name: ssidcompany2

  SIP: Enabled

Total SQA profiles: 2

Table 1 Command output

Field	Description
SQA profile name	SQA profile name.
SIP	Status of SIP-based SQA for the SQA profile: ·     Enabled. ·     Disabled.

‌

Related commands

application enable

application interval

application name enable

application statistics enable

application statistics interval

sqa profile

Use sqa profile to create an SQA profile and enter its view, or enter the view of an existing SQA profile.

Use undo sqa profile to delete an SQA profile.

Syntax

sqa profile profile-name

undo sqa profile profile-name

Default

No SQA profiles exist.

Views

System view

Predefined user roles

network-admin

Parameters

profile-name: Specifies the name of an SQA profile, a case-insensitive string of 1 to 31 characters. The SQA profile name can contain digits, letters, hyphens (-), underscores (_), left brackets ([), right brackets (]), and slashes (/).

Examples

# Create SQA profile ssidcompany and enter its view.

<Sysname> system-view

[Sysname] sqa profile ssidcompany

[Sysname-sqa-profile-ssidcompany]

Related commands

display sqa profile

sqa-profile

sqa-profile

Use sqa-profile to bind an SQA profile to a service template.

Use undo sqa-profile to unbind an SQA profile from a service template.

Syntax

sqa-profile profile-name

undo sqa-profile

Default

No SQA profile is bound to a service template.

Views

Service template view

Predefined user roles

network-admin

Parameters

profile-name: Specifies an SQA profile by its name, a case-insensitive string of 1 to 31 characters.

Usage guidelines

Use this command to enable a service template to optimize and analyze audio and video traffic for wireless clients associated with the service template.

You can bind only one SQA profile to a service template. To bind a different SQA template to the service template, first unbind the existing SQA profile from the service template.

Examples

# Bind SQA profile ssidcompany to service template service.

<Sysname> system-view

[Sysname] sqa profile ssidcompany

[Sysname-sqa-profile-ssidcompany] application tencentmeeting enable

[Sysname-sqa-profile-ssidcompany] quit

[Sysname] wlan service-template service

[Sysname-wlan-st-service] sqa-profile ssidcompany

Related commands

sqa profile