Login
- Table of Contents
- Related Documents
-
| Title | Size | Download |
|---|---|---|
| 04-Tunnel policy configuration | 42.93 KB |
Configuring tunnel policies
About tunnel policies
Tunnel policies enable a PE to forward traffic for each MPLS VPN over a preferred tunnel or load share the traffic over multiple tunnels. Using tunnel policies can facilitate network planning and management and reduce processing overhead on PEs.
For more information about MPLS VPN, see "Configuring MPLS L3VPN."
Configuring a tunnel policy
1. Enter system view.
system-view
2. Create a tunnel policy, and enter tunnel policy view.
tunnel-policy tunnel-policy-name
3. Configure the tunnel policy.
select-seq [ strict ] lsp load-balance-number number
By default, the policy selects only one tunnel.
Display and maintenance commands for tunnel policies
Execute display commands in any view.
|
Task |
Command |
|
Display tunnel information. |
display mpls tunnel { all | statistics | [ vpn-instance vpn-instance-name ] destination ipv4-address } |
|
Display tunnel policy information. |
display tunnel-policy [ tunnel-policy-name ] |
