Login
- Table of Contents
-
- 02-Layer 2-LAN Switching Command Reference
- 00-Preface
- 01-MAC address table commands
- 02-Bulk interface commands
- 03-Ethernet interface commands
- 04-Ethernet link aggregation commands
- 05-Port isolation commands
- 06-VLAN commands
- 07-Loopback, null, and inloopback interface commands
- 08-Loop detection commands
- 09-Spanning tree commands
- 10-LLDP commands
- 11-L2PT commands
- 12-Service loopback group commands
- 13-Layer 2 forwarding commands
- Related Documents
-
| Title | Size | Download |
|---|---|---|
| 12-Service loopback group commands | 50.63 KB |
Service loopback group commands
display service-loopback group
Use display service-loopback group to display service loopback group information.
Syntax
display service-loopback group [ group-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
group-id: Specifies a service loopback group ID. The value range for the group-id argument is 1 to 1024. If you do not specify a service loopback group, this command displays information about all service loopback groups.
Examples
# Display information about service loopback group 5.
<Sysname> display service-loopback group 5
Group ID: 5 Service type: Multiport
Member Status
Twenty-FiveGigE1/0/1 Selected
Twenty-FiveGigE1/0/1 Unselected
Table 1 Command output
|
Field |
Description |
|
Group ID |
Service loopback group ID. |
|
Service type |
Service type of the service loopback group: Multiport—Supports multiport ARP services. |
|
Member |
Member ports of the service loopback group. |
|
Status |
Member port state: · Unselected—The port is in Unselected state. An unselected port cannot forward traffic of the service type. · Selected—The port is in Selected state. A selected port can forward traffic of the service type. |
port service-loopback group
Use port service-loopback group to assign a port to a service loopback group.
Use undo port service-loopback group to remove a port from a service loopback group.
Syntax
port service-loopback group group-id
undo port service-loopback group
Default
A port does not belong to a service loopback group.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
Parameters
group-id: Specifies a service loopback group ID. The value range for the group-id argument is 1 to 1024.
Usage guidelines
|
|
CAUTION: · When you assign a port to a service loopback group, the system removes the configuration on the port. Make sure you are fully aware of the impact of this command before using it on a live network. · For correct traffic processing, make sure a service loopback group has a minimum of one member port when it is being used by a feature. |
Before assigning a port to a service loopback group, make sure the port supports the service type of the group.
A port can belong to only one service loopback group. You can assign a maximum of 32 ports to a service loopback group.
Examples
# Assign Twenty-FiveGigE 1/0/1 to service loopback group 5.
<Sysname> system-view
[Sysname] interface twenty-fivegige 1/0/1
[Sysname-Twenty-FiveGigE1/0/1] port service-loopback group 5
service-loopback group
Use service-loopback group to create a service loopback group and specify its service type.
Use undo service-loopback group to delete a service loopback group.
Syntax
service-loopback group group-id type multiport
undo service-loopback group group-id
Default
No service loopback groups exist.
Views
System view
Predefined user roles
network-admin
Parameters
group-id: Specifies a service loopback group ID. The value range for the group-id argument is 1 to 1024.
type: Specifies the service type of the service loopback group.
multiport: Specifies multiport ARP services.
Usage guidelines
Service loopback groups must work with other features. A service loopback group can be used by multiple features.
You must create a service loopback group before you can use it with a feature.
You can configure only one service loopback group for a service type. You cannot change the service type of a service loopback group.
To ensure correct traffic processing, do not delete a service loopback group that is being used by a feature.
Examples
# Create service loopback group 5 and specify multiport ARP services for the group.
<Sysname> system-view
[Sysname] service-loopback group 5 type multiport
