Contents

Sampler commands· 1

display sampler 1

sampler 1

Sampler commands

display sampler

Use display sampler to display configuration information for a sampler.

Syntax

display sampler [ sampler-name ] [ slot slot-number ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

sampler-name: Specifies a sampler by its name, a case-insensitive string of 1 to 31 characters. If you do not specify a sampler, this command displays configuration information for all samplers.

slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command displays sampler configuration information for the active MPU.

Examples

# Display the configuration information about sampler 256.

<Sysname> display sampler 256

 Sampler name: 256

  Mode: Random;  Packet-interval: 8; IsNpower: N

Table 1 Command output

‌

sampler

Use sampler to create a sampler.

Use undo sampler to delete a sampler.

Syntax

sampler sampler-name mode { fixed | random } packet-interval rate

undo sampler sampler-name

Default

No samplers exist.

Views

System view

Predefined user roles

network-admin

Parameters

sampler-name: Specifies a sampler by its name, a case-insensitive string of 1 to 31 characters.

fixed: Specifies the fixed sampling mode. A sampler in this mode selects the first packet per sampling.

random: Specifies the random sampling mode. A sampler in this mode randomly selects a packet out of a group of packets. Which packet is selected for each sampling varies.

rate: Specifies the sampling rate. One packet is selected from rate packets in each sampling.

Usage guidelines

This command takes effect on all cards.

Examples

# Create sampler abc in random sampling mode. Set the sampling rate to 8 to select one packet from 8 packets in each sampling.

<Sysname> system-view

[Sysname] sampler abc mode random packet-interval  8