- Table of Contents
- Related Documents
-
Title | Size | Download |
---|---|---|
02-LEDs | 2.15 MB |
Contents
2 LEDs
LEDs
MSR2600-5-GU-CNDE
Figure2-1 Front panel LEDs
(1) System status LED (SYS) |
(2) Network status LED (INTERNET) |
(3) VPN status LED (VPN) |
(4) Encryption module LED (CNDE) |
(5) 3G status LED (WWAN) |
(6) Received 3G signal strength indication LED (RSSI) |
Figure2-2 Rear panel LEDs
(1) GE port LEDs (yellow) |
(2) GE port LEDs (green) |
MSR2600-5-GT-CNDE
Figure2-3 Front panel LEDs
(1) System status LED (SYS) |
(2) Network status LED (INTERNET) |
(3) VPN status LED (VPN) |
(4) Encryption module LED (CNDE) |
(5) 3G status LED (WWAN) |
(6) Received 3G signal strength indication LED (RSSI) |
Figure2-4 Rear panel LEDs
(1) GE port LEDs (yellow) |
(2) GE port LEDs (green) |
MSR2600-5-LM-CNDE
Figure2-5 Front panel LEDs
(1) System status LED (SYS) |
(2) Network status LED (INTERNET) |
(3) VPN status LED (VPN) |
(4) Encryption module LED (CNDE) |
(5) 4G status LED (WWAN) |
(6) Received 4G signal strength indication LED (RSSI) |
Figure2-6 Rear panel LEDs
(1) GE port LEDs (yellow) |
(2) GE port LEDs (green) |
MSR2600-10
Figure2-7 LEDs
(1) System status LED (SYS) |
(2) Power status LED (PWR) |
(3) GE port LEDs (GE0 to GE9) |
MSR2600-17
Figure2-8 LEDs
(1) System status LED (SYS) |
(2) Power status LED (PWR) |
(3) SFP port LED (SFP16) |
(4) GE port LEDs (GE0 to GE15) |
MSR2630
Figure2-9 LEDs
(1) GE port LED (GE0) |
(2) GE port LED (GE1) |
(3) CON/AUX port LED |
(4) USB console port LED |
(5) System LED (SYS) |
(6) Power status LED (PWR) |
MSR2600-6-X1/MSR2630-XS
Figure2-10 LEDs
(1) System status LED (SYS) |
(2) Power status LED (PWR) |
(3) LEDs for GE copper ports GE0 to GE4 |
(4) LED for GE fiber port SFP5 |
MSR2600-10-X1
(1) System status LED (SYS) |
(2) Power status LED (PWR) |
(3) LEDs for GE copper ports GE0 to GE9 |
MSR2600-15-X1/MSR2600-15-X1-T
Figure2-12 LEDs
(1) LEDs for GE copper ports GE0 to GE12 |
(2) LEDs for GE fiber ports SFP13 and SFP14 |
(3) System status LED (SYS) |
(4) Power status LED (PWR) |
MSR2630E-X1
Figure2-13 LEDs
(1) System status LED (SYS) |
(2) LEDs for GE copper ports GE2 to GE9 |
(3) LEDs for 10GE fiber ports SFP+10 to SFP+12 |
(4) LEDs for combo copper ports GE0 and GE1 |
(5) LEDs for combo fiber ports SFP0 and SFP1 |
(6) Power status LED (PWR) |
(7) CTRL LED (CTRL) |
MSR2660-XS
Figure2-14 LEDs
(1) LEDs for GE copper ports GE2 to GE9 |
(2) LEDs for 10GE fiber ports SFP+10 and SFP+11 |
(3) LEDs for combo fiber ports 0 and 1 |
(4) LEDs for combo copper ports 0 and 1 |
(5) System status LED (SYS) |
MSR2680-XS
Figure2-15 MSR2680-XS LEDs
(1) System status LED (SYS) |
(2) LEDs for GE copper ports GE2 to GE9 |
(3) LEDs for 10GE fiber ports SFP+10 to SFP+12 |
(4) LEDs for combo copper ports 0 and 1 |
(5) LEDs for combo fiber ports 0 and 1 |
(6) Power status LED (PWR) |
LED descriptions
Table2-1 Front panel LED descriptions
LED |
Status |
Description |
System status LED (SYS) |
Slowly flashing green |
Comware has started with the configuration file and the router has booted up. |
Fast flashing green |
The system software image is being copied and decompressed. |
|
Steady green |
The SDRAM is performing self-test. |
|
Slowly flashing yellow |
The SDRAM has failed self-test. |
|
Fast flashing yellow |
The BootWare extended segment does not exist. |
|
Steady yellow |
The system software image does not exist. |
|
Off |
No power input, or exceptions have occurred. |
|
Power status LED (PWR) |
Steady green |
The power system is operating correctly. |
Off |
No power is being input. |
|
USB console port LED |
Steady green |
The router is using the USB console port for configuration. |
Off |
The router is not using the USB console port. |
|
CON/AUX port LED |
Steady green |
The router is using the console port for configuration. |
Off |
The router is not using the console port. |
|
Network status LED (INTERNET) |
Steady green |
The router has been connected to the network. |
Off |
The router has not been connected to the network. |
|
VPN status LED (VPN) |
Steady green |
A VPN link is present. |
Off |
No VPN link is present. |
|
3G status LED (WWAN) |
Steady green |
The router has been connected to the wireless network and is operating in 3G mode. |
Flashing green at 8 Hz |
Data is being received or transmitted. The router is operating in 3G mode. |
|
Steady yellow |
The router has been connected to the wireless network and is operating in 2G mode. |
|
Flashing yellow at 8 Hz |
Data is being received or transmitted. The router is operating in 2G mode. |
|
Off |
No link is present or no wireless network is available. |
|
Received 3G signal strength indication LED (RSSI) |
Steady green |
Strong signal. |
Flashing green at 8 Hz |
Middle or low signal strength. |
|
Off |
Weak or no signal. |
|
4G status LED (WWAN) |
Steady green |
The router has been connected to the wireless network and is operating in 4G mode. |
Flashing green at 8 Hz |
Data is being received or transmitted. The router is operating in 4G mode. |
|
Steady yellow |
The router has been connected to the wireless network and is operating in 3G mode. |
|
Flashing yellow at 8 Hz |
Data is being received or transmitted. The router is operating in 3G mode. |
|
Off |
No link is present or the router is operating is 2G mode. |
|
Received 4G signal strength indication LED (RSSI) |
Steady green |
Strong signal. |
Flashing green at 8 Hz |
Middle or low signal strength. |
|
Off |
Weak or no signal. |
|
Encryption module LED (CNDE) |
Steady green |
The power is being supplied correctly. |
Flashing green |
Encrypted data is being received or transmitted. |
|
10GE fiber port LED |
Steady green |
A 10 Gbps link is present on the port. |
Flashing green |
The port is sending or receiving data at 10 Gbps. |
|
Steady yellow |
A 1000 Mbps link is present on the port. |
|
Flashing yellow |
The port is sending or receiving data at 1000 Mbps. |
|
Off |
No link is present on the port. |
|
CTRL LED |
Steady green |
A WebSocket connection is present between the router and controller. |
Flashing yellow |
The router is connecting to the controller. |
|
Off |
No link is present between the router and controller. |
|
GE copper port LED Combo copper port LED |
Steady green |
A 1000 Mbps link is present on the port. |
Flashing green |
The port is sending or receiving data at 1000 Mbps. |
|
Steady yellow |
A 10/100 Mbps link is present on the port. |
|
Flashing yellow |
The port is sending or receiving data at 10/100 Mbps. |
|
Off |
No link is present on the port. |
|
Combo fiber port LED |
Steady green |
A 1000 Mbps link is present on the port. |
Flashing green |
The port is sending or receiving data at 1000 Mbps. |
|
Steady yellow |
A 100 Mbps link is present on the port. |
|
Flashing yellow |
The port is sending or receiving data at 100 Mbps. |
|
Off |
No link is present on the port. |
|
SFP port LED |
Steady green |
A 1000 Mbps link is present on the port. |
Flashing green |
The port is sending or receiving data at 1000 Mbps. |
|
Steady yellow |
A 10/100 Mbps link is present on the port. |
|
Flashing yellow |
The port is sending or receiving data at 10/100 Mbps. |
|
Off |
No link is present on the port. |
|
SFP port LED (for the MSR2600-15-X1/MSR2600-15-X1-T) |
Steady green |
A 1000 Mbps link is present on the port. |
Flashing green |
The port is sending or receiving data at 1000 Mbps. |
|
Off |
No link is present on the port. |