- Table of Contents
- Related Documents
-
Title | Size | Download |
---|---|---|
05-PMM configuration | 54.07 KB |
Configuring PMM
About PMM
Packet monitor management (PMM) enables the device to perform the following tasks:
1. Capture packets from the uplink interface.
2. Decode the packets and encapsulate them in the required format.
3. Send the packets to the designated server.
Restrictions: Hardware compatibility with PMM
Hardware series |
Model |
Product code |
PMM compatibility |
WX1800H series |
WX1804H |
EWP-WX1804H-PWR-CN |
Yes |
WX2500H series |
WX2508H-PWR-LTE WX2510H WX2510H-F WX2540H WX2540H-F WX2560H |
EWP-WX2508H-PWR-LTE EWP-WX2510H-PWR EWP-WX2510H-F-PWR EWP-WX2540H EWP-WX2540H-F EWP-WX2560H |
Yes: · WX2510H · WX2510H-F No: · WX2508H-PWR-LTE · WX2540H · WX2560H · WX2540H-F |
MAK series |
MAK204 MAK206 |
EWP-MAK204 EWP-MAK206 |
No |
WX3000H series |
WX3010H WX3010H-X WX3010H-L WX3024H WX3024H-L WX3024H-F |
EWP-WX3010H EWP-WX3010H-X-PWR EWP-WX3010H-L-PWR EWP-WX3024H EWP-WX3024H-L-PWR EWP-WX3024H-F |
No |
WX3500H series |
WX3508H WX3510H WX3520H WX3520H-F WX3540H |
EWP-WX3508H EWP-WX3510H EWP-WX3520H EWP-WX3520H-F EWP-WX3540H |
No |
WX5500E series |
WX5510E WX5540E |
EWP-WX5510E EWP-WX5540E |
No |
WX5500H series |
WX5540H WX5560H WX5580H |
EWP-WX5540H EWP-WX5560H EWP-WX5580H |
No |
Access controller modules |
LSUM1WCME0 EWPXM1WCME0 LSQM1WCMX20 LSUM1WCMX20RT LSQM1WCMX40 LSUM1WCMX40RT EWPXM2WCMD0F EWPXM1MAC0F |
LSUM1WCME0 EWPXM1WCME0 LSQM1WCMX20 LSUM1WCMX20RT LSQM1WCMX40 LSUM1WCMX40RT EWPXM2WCMD0F EWPXM1MAC0F |
No |
Hardware series |
Model |
Product code |
PMM compatibility |
WX1800H series |
WX1804H WX1810H WX1820H WX1840H |
EWP-WX1804H-PWR EWP-WX1810H-PWR EWP-WX1820H EWP-WX1840H-GL |
No |
WX3800H series |
WX3820H WX3840H |
EWP-WX3820H-GL EWP-WX3840H-GL |
No |
WX5800H series |
WX5860H |
EWP-WX5860H-GL |
No |
PMM configuration tasks at a glance
To configure PMM, perform the following tasks:
· Configuring PMM for ACOrange
· Configuring PMM for SURFILTER
Configuring PMM for exands
1. Enter system view.
system-view
2. Specify the audit packet format as exands.
pmm audit-format exands
By default, the audit packet format is not specified.
3. Specify the IP address of the exands server.
pmm http server ipv4 ip-address
By default, the IP address of the exands server is not specified.
Configuring PMM for ACOrange
1. Enter system view.
system-view
2. Specify the audit packet format as jc.
pmm audit-format jc
By default, the audit packet format is not specified.
3. Specify the source interface for packet sending to the server.
pmm source-interface interface-type interface-number
By default, the source interface used to send packets to the server is not specified.
Configuring PMM for SURFILTER
1. Enter system view.
system-view
2. Specify the audit packet format as rzx.
pmm audit-format rzx
By default, the audit packet format is not specified.
3. Specify the source interface for sending captured packets to a server.
pmm source-interface interface-type interface-number
By default, the source interface for sending captured packets to a server is not specified.