Contents

VCF fabric commands· 1

display vcf-fabric role· 1

display vcf-fabric underlay autoconfigure· 1

display vcf-fabric underlay template-version· 4

vcf-fabric topology enable· 5

vcf-fabric underlay autoconfigure· 5

vcf-fabric underlay pause· 6

 

VCF fabric commands

The following switch series do not support VCF fabric:

·     S5560S-SI

·     S5500V3-SI

·     MS4520V2

·     WS5850-WiNet

display vcf-fabric role

Use display vcf-fabric role to display the role of the device in the VCF fabric.

Syntax

display vcf-fabric role

Views

Any view

Predefined user roles

network-admin

network-operator

Usage guidelines

Use this command to display the default role and the current role of the device in the VCF fabric. To change the current role of the device, use the vcf-fabric role command.

Examples

# Display the role of the device in the VCF fabric.

<System> display vcf-fabric role

Default role: access

Current role: access

Table 1 Command output

Field	Description
Default role	Default role of the device.
Current role	Current role of the device.

 

Related commands

vcf-fabric role

display vcf-fabric underlay autoconfigure

Use display vcf-fabric underlay autoconfigure to display information about automated underlay network deployment.

Syntax

display vcf-fabric underlay autoconfigure

Views

Any view

Predefined user roles

network-admin

network-operator

Usage guidelines

Before you execute this command, make sure automated underlay network deployment is enabled.

Examples

# Display information about automated underlay network deployment.

<Sysname> display vcf-fabric underlay autoconfigure

success command:

        #

          system

          clock timezone beijing add 08:00:00

        #

          system

          lldp global enable

        #

          system

          stp global enable

        #

          system

          interface Vlan-interface1

          ip address dhcp-alloc

        #

          system

          telnet server enable

        #

          system

          ssh server enable

        #

          system

          info-center loghost 110.0.0.111

        #

          system

          local-user aaa

          password ******

          service-type telnet http https ssh

          authorization-attribute user-role network-admin

        #

          system

          line vty 0 63

          authentication-mode scheme

          user-role network-admin

        #

          system

          vcf-fabric topology enable

        #

          system

          snmp-agent

          snmp-agent community read public

          snmp-agent community write private

          snmp-agent sys-info version all

        #

          system

          vlan 4093

        #

          system

          vlan 4094

        #

          system

          interface Vlan-interface4094

          ip address dhcp-alloc

        #

          system

          ntp-service enable

          ntp-service unicast-server 110.0.0.111

        #

          system

          snmp-agent

          snmp-agent community read public

          snmp-agent community write private

          snmp-agent sys-info version all

          snmp-agent packet max-size 4096

          snmp-agent target-host trap address udp-domain 110.0.0.111 params securityname public v2c

        #

          system

          telnet server enable

          local-user 2

          password ******

          service-type telnet http https

          authorization-attribute user-role network-admin

        #

          system

          ssh server enable

          local-user 3

          password ******

          service-type ssh http https

          authorization-attribute user-role network-admin

        #

          system

          netconf soap http enable

          netconf soap https enable

          local-user 1

          password ******

          service-type http https

          authorization-attribute user-role network-admin

        #

IRF allocation:

        Self Bridge Mac: 00e0-fc00-510a

        IRF Status: No

        Member List: [1]

Table 2 Command output

Field	Description
success command	Commands that have been successfully executed during automated underlay network deployment.
Uplink interface	Uplink interfaces of the device.
Downlink interface	Downlink interfaces of the device.
Aggregation configuration	Information about Layer 2 aggregation groups.
IRF allocation	IRF configurations, including IRF bridge MAC address of the IRF fabric, IRF status, and the IRF member ID of the device.

 

Related commands

vcf-fabric underlay autoconfigure

display vcf-fabric underlay template-version

Use display vcf-fabric underlay template-version to display the supported version and the current version of the template file for automated VCF fabric deployment.

Syntax

display vcf-fabric underlay template-version

Views

Any view

Predefined user roles

network-admin

network-operator

Usage guidelines

The version format of a template file for automated VCF fabric deployment is x.y. Only the x part is examined during a version compatibility check. For successful automated deployment, make sure x in the version of the template file to be used is not greater than x in the supported version.

Examples

# Display the supported version and the current version of the template file for automated VCF fabric deployment when automated deployment is not started.

<Sysname> display vcf-fabric underlay template-version

Supported template version: 6.0

Current template version: Not available

# Display the supported version and the current version of the template file for automated VCF fabric deployment when automated deployment has finished.

<Sysname> display vcf-fabric underlay template-version

Supported template version: 6.0

Current template version: 6.0

Table 3 Command output

Field	Description
Supported template version	Supported version of the template file for automated VCF fabric deployment.
Current template version	Current version of the template file for automated VCF fabric deployment. This field displays Not available if automated VCF fabric deployment has not started. This field displays None if automated VCF fabric deployment has finished but the template file does not contain a version number.

 

vcf-fabric topology enable

Use vcf-fabric topology enable to enable VCF fabric topology discovery.

Use undo vcf-fabric topology enable to disable VCF fabric topology discovery.

Syntax

vcf-fabric topology enable

undo vcf-fabric topology enable

Default

VCF fabric topology discovery is disabled.

Views

System view

Predefined user roles

network-admin

Examples

# Enable VCF fabric topology discovery.

<Sysname> system-view

[Sysname] vcf-fabric topology enable

vcf-fabric underlay autoconfigure

Use vcf-fabric underlay autoconfigure to specify the template file for automated underlay network deployment.

Use undo vcf-fabric underlay autoconfigure to restore the default.

Syntax

vcf-fabric underlay autoconfigure template

undo vcf-fabric underlay autoconfigure

Default

No template file is specified for automated underlay network deployment.

Views

System view

Predefined user roles

network-admin

Parameters

template: Specifies a template file by its name, a case-insensitive string of 1 to 127 characters. A template file is a file ending with the .template file extension.

Usage guidelines

After this command is executed, the device uses the specified template file to deploy the underlay network.

Examples

# Specify template file 1_access.template for automated underlay network deployment.

<Sysname> system-view

[Sysname] vcf-fabric underlay autoconfigure 1_access.template

vcf-fabric underlay pause

Use vcf-fabric underlay pause to pause automated underlay network deployment.

Use undo vcf-fabric underlay pause to continue automated underlay network deployment.

Syntax

vcf-fabric underlay pause

undo vcf-fabric underlay pause

Default

Automated underlay network deployment is not paused.

Views

System view

Predefined user roles

network-admin

Usage guidelines

You can use this command to pause automated underlay network deployment if the device is in the process of automated underlay network deployment.

Examples

# Pause automated underlay network deployment.

<Sysname> system-view

[Sysname] vcf-fabric underlay pause