- Table of Contents
- Related Documents
-
Title | Size | Download |
---|---|---|
04-PMM configuration | 47.16 KB |
Configuring PMM
About PMM
Packet monitor management (PMM) enables the device to perform the following tasks:
1. Capture packets from the uplink interface.
2. Decode the packets and encapsulate them in the required format.
3. Send the packets to the designated server.
Restrictions: Hardware compatibility with PMM
Hardware series |
Model |
PMM compatibility |
WX2500H series |
WX2508H-PWR-LTE WX2510H WX2540H WX2560H |
Yes: WX2510H No: · WX2508H-PWR-LTE · WX2540H · WX2560H |
WX3000H series |
WX3010H WX3010H-L WX3010H-X WX3024H WX3024H-L |
No |
WX3500H series |
WX3508H WX3510H WX3520H WX3540H |
No |
WX5500E series |
WX5510E WX5540E |
No |
WX5500H series |
WX5540H WX5560H WX5580H |
No |
Access controller modules |
LSQM1WCMX20 LSQM1WCMX40 LSUM1WCME0 LSUM1WCMX20RT LSUM1WCMX40RT |
No |
Hardware series |
Model |
PMM compatibility |
WX1800H series |
WX1804H WX1810H WX1820H WX1840H |
No |
WX3800H series |
WX3820H WX3840H |
No |
WX5800H series |
WX5860H |
No |
Configuring PMM for exands
1. Enter system view.
system-view
2. Specify the audit packet format as exands.
pmm audit-format exands
By default, the audit packet format is not specified.
3. Specify the IP address of the exands server.
pmm http server ipv4 ip-address
By default, the IP address of the exands server is not specified.
Configuring PMM for SURFILTER
1. Enter system view.
system-view
2. Specify the audit packet format as rzx.
pmm audit-format rzx
By default, the audit packet format is not specified.
3. Specify the source interface for sending captured packets to a server.
pmm source-interface interface-type interface-number
By default, the source interface for sending captured packets to a server is not specified.