- Table of Contents
- Related Documents
-
Title | Size | Download |
---|---|---|
02-WT commands | 57.23 KB |
WT commands
The AP models and serial numbers in this document are used only as examples. Support for AP models and serial numbers depends on the AC model.
The following compatibility matrixes show the support of hardware platforms for WT:
Hardware series |
Model |
Product code |
WT compatibility |
WX1800H series |
WX1804H |
EWP-WX1804H-PWR-CN |
No |
WX2500H series |
WX2508H-PWR-LTE WX2510H WX2510H-F WX2540H WX2540H-F WX2560H |
EWP-WX2508H-PWR-LTE EWP-WX2510H-PWR EWP-WX2510H-F-PWR EWP-WX2540H EWP-WX2540H-F EWP-WX2560H |
Yes |
WX3000H series |
WX3010H WX3010H-X WX3010H-L WX3024H WX3024H-L WX3024H-F |
EWP-WX3010H EWP-WX3010H-X-PWR EWP-WX3010H-L-PWR EWP-WX3024H EWP-WX3024H-L-PWR EWP-WX3024H-F |
Yes |
WX3500H series |
WX3508H WX3510H WX3520H WX3520H-F WX3540H |
EWP-WX3508H EWP-WX3510H EWP-WX3520H EWP-WX3520H-F EWP-WX3540H |
Yes |
WX5500E series |
WX5510E WX5540E |
EWP-WX5510E EWP-WX5540E |
Yes |
WX5500H series |
WX5540H WX5560H WX5580H |
EWP-WX5540H EWP-WX5560H EWP-WX5580H |
Yes |
Access controller modules |
LSUM1WCME0 EWPXM1WCME0 LSQM1WCMX20 LSUM1WCMX20RT LSQM1WCMX40 LSUM1WCMX40RT EWPXM2WCMD0F EWPXM1MAC0F |
LSUM1WCME0 EWPXM1WCME0 LSQM1WCMX20 LSUM1WCMX20RT LSQM1WCMX40 LSUM1WCMX40RT EWPXM2WCMD0F EWPXM1MAC0F |
Yes |
Hardware series |
Model |
Product code |
WT compatibility |
WX1800H series |
WX1804H WX1810H WX1820H WX1840H |
EWP-WX1804H-PWR EWP-WX1810H-PWR EWP-WX1820H EWP-WX1840H-GL |
No |
WX3800H series |
WX3820H WX3840H |
EWP-WX3820H-GL EWP-WX3840H-GL |
No |
WX5800H series |
WX5860H |
EWP-WX5860H-GL |
No |
display wlan wt
Use display wlan wt to display wireless terminator (WT) information and information about the wireless terminator units (WTUs) connected to it.
Syntax
display wlan wt { all | name wt-name }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
all: Specifies all WTs.
name wt-name: Specifies a WT by its name, a case-sensitive string of 1 to 64 characters. The string can contain letters, digits, underscores (_), dots (.), left brackets ([), right brackets (]), forward slashes (/), and hyphens (-).
Examples
# Display information about all WTs.
<Sysname> display wlan wt all
WT name : wt1
Model : WT1020
Serial ID : 219801A0SS9156G00072
MAC address : 0000-f3ea-0a3e
WTU number : 2
Wireless Terminator Unit:
---------------------------------------------------------
WTU name Port Model Serial ID
---------------------------------------------------------
wtu1 1 WTU430 219801A0SS9156G00185
wtu2 2 WTU430 219801A0SS9156G00133
WT name : wt2
Model : WT1020
Serial ID : 219801A0SS9156G00068
MAC address : 0000-f3ea-0a3a
WTU number : 2
Wireless Terminator Unit:
---------------------------------------------------------
WTU name Port Model Serial ID
---------------------------------------------------------
wtu3 3 WTU430 219801A0SS9156G00054
Wtu4 4 WTU430 219801A0SS9156G00167
Table 1 Command output
Fields |
Description |
WTU number |
Number of WTUs that are connected to the WT. |
Wireless Terminator Unit |
WTU information. |
Port |
Port that connects the WT to a WTU. |
poe wtu-port
Use poe wtu-port enable to enable PoE for a WTU port.
Use poe wtu-port disable to disable PoE for a WTU port.
Use undo poe wtu-port to restore the default.
Syntax
poe wtu-port port-number1 [ to port-number2 ] { disable | enable }
undo poe wtu-port port-number1 [ to port-number2 ]
Default
In AP view, an AP uses the configuration in an AP group's AP model view.
In an AP group's AP model view, PoE is enabled for WTU ports.
Views
AP view
AP group's AP model view
Predefined user roles
network-admin
Parameters
port-number1: Specifies the WTU port number. The value range varies by WT model.
port-number1 to port-number2: Specifies a WTU port range. The port-number1 argument represents the start port number, and the port-number2 argument represents the end port number. The end port number cannot be smaller than the start port number. Value range for a port number varies by WT model.
Usage guidelines
A WT stops power supply to the connected WTU through PoE after you disable PoE for a WTU port of the WT.
This command is configurable only when the AP is a WT.
Examples
# Disable PoE for WTU port 1 in AP view.
<Sysname> system-view
[Sysname] wlan ap ap1 WT1020
[Sysname-wlan-ap-ap1] poe wtu-port 1 disable
# Disable PoE for WTU port 1 in AP model view of AP group 1.
<Sysname> system-view
[Sysname] wlan ap-group 1
[Sysname-wlan-ap-group-1] ap-model WT1020
[Sysname-wlan-ap-group-1-ap-model-WT1020] poe wtu-port 1 disable
port-type switch
|
NOTE: Support for this command depends on the WT model. |
Use port-type switch to enable switching between an Ethernet port and a WTU port on a WT.
Use undo port-type switch to restore the default.
Syntax
port-type switch number port-number-list { gigabitethernet | wtu }
undo port-type switch number port-number-list
Default
In AP view, an AP uses the configuration in an AP group's AP model view.
In an AP group's AP model view, the default setting varies by AP model.
Views
AP view
AP group's AP model view
Predefined user roles
network-admin
Parameters
gigabitethernet: Switches a WTU port to an Ethernet port.
wtu: Switches an Ethernet port to a WTU port.
port-number-list: Specifies a space-separated list of Ethernet or WTU port items. Each item specifies an Ethernet/WTU port or a range of Ethernet/WTU ports in the form of port-number1 to port-number2. The value for the port-number2 argument must be equal to or greater than the value for the port-number1 argument. &<1-n> Indicates that you can specify up to n port numbers. The value for n varies by WT model.
Usage guidelines
CAUTION: To prevent the chips on the connected from being damaged because of PoE power supply capacity change, make sure the port to switch is not connected to any other device. |
You can execute this command to increase the number of WTU ports on a WT.
This command will reboot the WT and the new port will use its default settings.
If a port has a mark of two different port names separated by a slash (/), G3/WTU26 for example, the port supports port type switching.
The configuration in AP view takes precedence over the configuration in an AP group's AP model view.
Examples
# Switch Ethernet port 3 to a WTU port in AP view.
<Sysname> system-view
[Sysname] wlan ap ap1 model WT1024-X-Q
[Sysname-wlan-ap-ap1] port-type switch number 3 wtu
# Switch Ethernet port 3 to a WTU port in AP model view of AP group 1.
<Sysname> system-view
[Sysname] wlan ap-group 1
[Sysname-wlan-ap-group-1] ap-model WT1024-X-Q
[Sysname-wlan-ap-group-1-ap-model-WT1024-X-Q] port-type switch number 3 wtu
wt version
|
NOTE: Support for this command depends on the WT model. |
Use wt version to specify the WT version.
Use undo wt version to restore the default.
Syntax
wt version { 1 | 2 | 3 }
undo wt version
Default
In AP view, an AP uses the configuration in an AP group's AP model view.
In an AP group's AP model view, the default setting varies by AP model.
Views
AP view
AP group's AP model view
Predefined user roles
network-admin
Parameters
1: Specifies version 1.0.
2: Specifies version 2.0.
3: Specifies version 3.0.
Usage guidelines
This command is configurable only when the AP is a WT.
If the specified WT version is different from the WT version in use, the WT will restart automatically. Then, it will switch to the specified WT version and restore the factory settings.
Support for WT versions varies by AP model.
This command does not take effect on WTs that support different types of WTUs.
Examples
# Specify version 2.0 as the WT version in AP view.
<Sysname> system-view
[Sysname] wlan ap ap1 mode WT1020
[Sysname-wlan-ap-ap1] wt version 2
# Specify version 2.0 as the WT version in AP model view of AP group 1.
<Sysname> system-view
[Sysname] wlan ap-group 1
[Sysname-wlan-ap-group-1] ap-model WT1020
[Sysname-wlan-ap-group-1-ap-model-WT1020] wt version 2