14-Security Command Reference

HomeSupportResource CenterH3C FAT AP Command References(R5436)-6W10114-Security Command Reference
03-User profile commands
Title Size Download
03-User profile commands 47.67 KB

User profile commands

display user-profile

Use display user-profile to display configuration and online user information for user profiles.

Syntax

display user-profile [ name profile-name ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

name profile-name: Specifies a user profile by its name, a case-sensitive string of 1 to 31 characters. Valid characters include English letters, digits, and underscores (_). The name must start with an English letter or digit, and cannot contain only digits. The name must be globally unique. If you do not specify this option, the command displays configuration and online user information for all user profiles.

Examples

# Display configuration and online user information for user profile aaa.

<Sysname> display user-profile name aaa

  User-Profile: aaa

    Inbound:

      CIR 64 (kbps), CBS 512 (Bytes)

      Policy: p1

    Outbound:

      CIR 64 (kbps), CBS 512 (Bytes)

 

    User user_1:

      Authentication type: 802.1X

      Network attributes:

        Interface    : GigabitEthernet1/0/1

        MAC address  : 0000-1111-2222

      Failed action list:

        Inbound: Policy p1

        Inbound: CIR 64 (kbps), CBS 2048 (Bytes)

Table 1 Command output

Field

Description

User-Profile

User profile name.

Inbound

Policy applied to incoming traffic.

Outbound

Policy applied to outgoing traffic.

CIR

Committed information rate, in kbps.

CBS

Committed burst size, in bytes.

Policy

Policy name.

User user_1

Username of a user account with which a user profile is associated.

Authentication type

Authentication type:

·     802.1X—802.1X authentication.

·     Portal—Portal authentication.

·     PPP—PPP authentication.

·     MACA—MAC authentication.

Network attributes

Online user information.

Failed action list

Actions that failed to be applied to the user.

 

user-profile

Use user-profile to create a user profile and enter its view, or enter the view of an existing user profile.

Use undo user-profile to delete a user profile.

Syntax

user-profile profile-name

undo user-profile profile-name

Default

No user profiles exist.

Views

System view

Predefined user roles

network-admin

Parameters

profile-name: Specifies a user profile by its name, a case-sensitive string of 1 to 31 characters. Valid characters include English letters (a-z, A-Z), digits (0-9), and underscores (_). The name must start with an English letter or digit, and cannot contain only digits. The name must be globally unique.

Examples

# Create user profile a123 and enter the view of a123.

<Sysname> system-view

[Sysname] user-profile a123

[Sysname-user-profile-a123]