01-Fundamentals Command Reference

HomeSupportReference GuidesCommand ReferencesH3C S5130S-SI[LI]&S5120V2-SI[LI]&S5110V2-SI&S5000V3-EI&S5000E-X&S3100V3-SI Command References-R612x-6W10201-Fundamentals Command Reference
07-Software upgrade commands
Title Size Download
07-Software upgrade commands 86.41 KB

Software upgrade commands

As a best practice, store the startup images in a fixed storage medium. If you store the startup images in a hot swappable storage medium, do not remove the hot swappable storage medium during the startup process.

boot-loader file

Use boot-loader file to specify startup image files.

Syntax

boot-loader file boot filename system filename [ feature filename&<1-30> ] [ patch filename&<1-16> ] { all | slot slot-number } { backup | main }

boot-loader file ipe-filename [ patch filename&<1-16> ] { all | slot slot-number } { backup | main }

Views

User view

Predefined user roles

network-admin

Parameters

boot: Specifies a boot image file.

system: Specifies a system image file.

feature: Specifies a space-separated list of up to 30 feature image files.

patch: Specifies a space-separated list of up to 16 patch image files.

filename: Specifies a .bin file in the filesystemname/filename.bin format. The file must be stored in the root directory of a file system on the device. Excluding the file system location section (if any), the value string can have a maximum of 63 characters. For more information about specifying a file, see file system management in Fundamentals Configuration Guide.

ipe-filename: Specifies an .ipe image package file in the filesystemname/filename.ipe format. The file must be stored in the root directory of a file system on the device. Excluding the file system location section (if any), the value string can have a maximum of 63 characters. For more information about specifying a file, see file system management in Fundamentals Configuration Guide.

all: Specifies all IRF member devices.

slot slot-number: Specifies the IRF member ID of a member device.

backup: Specifies the files as backup startup image files. Backup images are used only when main images are not available.

main: Specifies the files as main startup image files. The device always first attempts to start up with main startup files.

Usage guidelines

The boot-loader file command overwrites the entire startup image list. To add new startup feature images, specify all feature image files in the old startup image list, including feature image files. The new startup image list will contain only the feature image files that are specified in the command.

To load the specified startup software images, you must reboot the system.

If the upgrade images are not found in the file system on the slot specified to upgrade, the system automatically copies the images to that file system. The destination directory is the root directory of the file system. If the destination root directory already contains a startup image with the same name as an upgrade image, you must choose whether to overwrite the image.

Examples

# Specify flash:/all.ipe as the main startup image file for slot 1.

<Sysname> boot-loader file flash:/all.ipe slot 1 main

Verifying the IPE file and the images............Done.

H3C S5120V2-52P-SI Switch images in IPE:

  boot.bin

  system.bin

This command will set the main startup software images. Continue? [Y/N]:Y

Add images to slot 1.

File flash:/boot.bin already exists on slot 1.

File flash:/system.bin already exists on slot 1.

Overwrite the existing files? [Y/N]:Y

Decompressing file boot.bin to flash:/boot.bin........................Done.

Decompressing file system.bin to flash:/system.bin...............................Done.

Verifying the file flash:/boot.bin on slot 1...Done.

Verifying the file flash:/system.bin on slot 1.............Done.

The images that have passed all examinations will be used as the main startup software images at the next reboot on slot 1.

# Specify flash:/all.ipe as the main startup image file for all IRF member devices.

<Sysname> boot-loader file slot1#flash:/all.ipe all main

Verifying the file flash:/all.ipe on slot 1......................................Done.

H3C S5120V2-52P-SI Switch images in IPE:

  boot.bin

  system.bin

This command will set the main startup software images. Continue? [Y/N]:y

Add images to slot 1.

File flash:/boot.bin already exists on slot 1.

File flash:/system.bin already exists on slot 1.

Overwrite the existing files? [Y/N]:y

Decompressing file boot.bin to flash:/boot.bin........................Done.

Decompressing file system.bin to flash:/system.bin........................Done.

The images that have passed all examinations will be used as the main startup software images at the next reboot on slot 1.

File flash:/boot.bin already exists on slot 2.

Do you want to overwrite the file?

 Y: Overwrite the file.

 N: Not overwrite the file.

 A: From now on, overwrite or not overwrite without prompt.

Please make a choice. [Y/N/A]:a

What type of overwrite operation do you want to perform?

 Y: Overwrite without prompt.

 N: Not overwrite or display prompt.

 Q: Return to the previous step.

Please make a choice. [Y/N/Q]:y

An existing file will be overwritten without prompt if it has the same name as any upgrade file.

Loading......................Done.

Loading......................Done.

Loading......................Done.

Loading......................Done.

Loading......................Done.

Loading......................Done.

The images that have passed all examinations will be used as the main startup software images at the next reboot on slot 2.

The images that have passed all examinations will be used as the main startup software images at the next reboot on slot 3.

Decompression completed.

Do you want to delete flash:/all.ipe now? [Y/N]:n

Related commands

display boot-loader

boot-loader update

Use boot-loader update to synchronize startup images.

Syntax

boot-loader update { all | slot slot-number }

Views

User view

Predefined user roles

network-admin

Parameters

all: Synchronizes startup images from the master to all subordinate devices.

slot slot-number: Specifies the IRF member ID of a subordinate device.

Usage guidelines

You can use this command to synchronize startup images after adding new member devices.

The startup images synchronized to the subordinate device are set as main startup images, regardless of whether the source startup images are main or backup.

·          If the master device has started up with main startup images, its main startup images are synchronized to the subordinate device, regardless of whether any main startup image has been respecified on the master device.

·          If the master device has started up with backup startup images, its backup startup images are synchronized to the subordinate device, regardless of whether any backup startup image has been respecified on the master device.

If patches have been installed on the master, use the install commit command to update the set of main startup images on the master before software synchronization. This command ensures startup image consistency between the master and the subordinate device.

Startup image synchronization fails if any software image being synchronized is not available or is corrupted.

Examples

# Synchronize startup images from the master device to the subordinate device in slot 2.

<Sysname> boot-loader update slot 2

This command will update the specified standby MPU. Continue? [Y/N]:y

Updating. Please wait...

Verifying the file flash:/s5120v2_si-cmw710-boot-a6103p06.bin on slot 1...Done.

Verifying the file flash:/s5120v2_si-cmw710-system-a6103p06.bin on slot 1....Done.

Verifying the file flash:/s5120v2_si -cmw710-devkit-a6103p06.bin on slot 1...Done.

Copying main startup software images to slot 2. Please wait...

Done.

Setting copied images as main startup software images for slot 2...

The images that have passed all examinations will be used as the main startup software images at the next reboot on slot 2.

Done.

Successfully updated the startup software images of slot 2.

Related commands

display boot-loader

bootrom update

Use bootrom update to load the BootWare image from a file system to the Normal BootWare area.

Syntax

bootrom update file file slot slot-number-list

Views

User view

Predefined user roles

network-admin

Parameters

file file: Specifies the file that contains the BootWare image. The file argument represents the file name, a string of 1 to 63 characters.

slot slot-number-list: Specifies a space-separated list of up to seven slot number items. An item specifies an IRF member device by its member ID or a range of IRF member devices in the form of start-slot-number to end-slot-number. The end slot number must be equal to or greater than the start slot number.

Usage guidelines

BootWare images are contained in the .bin Comware boot image file. You can specify a Comware boot image file in this command to upgrade the BootWares in the system before you upgrade the Comware images. If you do not upgrade BootWares before upgrading Comware images, the system automatically upgrades BootWares as necessary when loading Comware images.

The new BootWare images take effect after you reboot the device.

Examples

# Use the file a.bin in the root directory of the flash memory to upgrade the BootWare image.

<Sysname> bootrom update file flash:/a.bin slot 1

   This command will update the Boot ROM file on the specified board(s), Continue? [Y/N]:y

   Now updating the Boot ROM, please wait................Done.

Related commands

boot-loader file

display boot-loader

Use display boot-loader to display current software images and startup software images.

Syntax

display boot-loader [ slot slot-number ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

slot slot-number: Specifies the member ID of an IRF member device. If you do not specify a member device, this command displays the software images on each IRF member device.

Examples

# Display the current software images and startup software images.

<Sysname> display boot-loader

Software images on slot 1:

Current software images:

  flash:/boot.bin

  flash:/system.bin

Main startup software images:

  flash:/boot.bin

  flash:/system.bin

Backup startup software images:

  flash:/boot.bin

  flash:/system.bin

Table 1 Command output

Field

Description

Current software images

Comware images that have been loaded.

Main startup software images

Primary Comware images for the next startup.

Backup startup software images

Backup Comware images for the next startup.

 

Related commands

boot-loader file

display install active

Use display install active to display active software images.

Syntax

display install active [ slot slot-number ] [ verbose ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

slot slot-number: Specifies an IRF member device by its member ID. If you do not specify an IRF member device, this command displays information for all IRF member devices.

verbose: Displays detailed information. If you do not specify this keyword, the command displays only image names.

Examples

# Display brief information about active software images.

<Sysname> display install active

Active packages on slot 1:

  flash:/boot.bin

  flash:/system.bin

  flash:/feature.bin

# Display detailed information about active software images.

<Sysname> display install active verbose

Active packages on slot 1:

flash:/boot.bin

 [Package]

 Vendor: H3C

 Product: S5120V2

 Service name: boot

 Platform version: 7.1.022

 Product version: Test 2201

 Supported board: mpu

 [Component]

 Component: boot

 Description: boot package

 

flash:/system.bin

 [Package]

 Vendor: H3C

 Product: S5120V2

 Service name: system

 Platform version: 7.1.022

 Product version: Test 2201

 Supported board: mpu

 [Component]

 Component: system

 Description: system package

 

flash:/feature.bin

 [Package]

 Vendor: H3C

 Product: S5120V2

 Service name: test

 Platform version: 7.1.022

 Product version: Test 2201

 Supported board: mpu

 [Component]

 Component: test

 Description: test package

Table 2 Command output

Field

Description

[Package]

Detailed information about the software image.

Service name

Image type:

·         bootBoot image.

·         boot-patchBoot image patch.

·         systemSystem image.

·         system-patchSystem image patch.

·         Any other value indicates a feature image.

Platform version

Platform software version.

Product version

Product software version.

Supported board

Device type supported by the software image. The value is fixed at mpu, which indicates an IRF member device.

[Component]

Information about components included in the image file.

Component

Component name.

Description

Component description.

Related commands

install active

display install committed

Use display install committed to display main startup software images.

Syntax

display install committed [ slot slot-number ] [ verbose ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

slot slot-number: Specifies an IRF member device by its member ID. If you do not specify an IRF member device, this command displays information for all IRF member devices.

verbose: Displays detailed information. If you do not specify this keyword, the command displays only image names.

Usage guidelines

Some install commands modify the current software image list but do not modify the main startup image list. For the software image changes to take effect after a reboot, you must execute the install commit command to update the main startup image list with the image changes. You can use the display install committed command to verify the operation results.

Both the install commit and boot-loader file commands modify the main startup software image list.

Examples

# Display brief information about main startup software images.

<Sysname> display install committed

Committed packages on slot 1:

 flash:/boot-t5101.bin

 flash:/system-t5101.bin

 flash:/feature.bin

# Display detailed information about main startup software images.

<Sysname> display install committed verbose

Committed packages on slot 1:

 flash:/boot-t5101.bin

 [Package]

 Vendor: H3C

 Product: S5120V2

 Service name: boot

 Platform version: 7.1

 Product version: Beta 1330

 Supported board: mpu

 [Component]

 Component: boot

 Description: boot package

 

 flash:/system-t5101.bin

 [Package]

 Vendor: H3C

 Product: S5120V2

 Service name: system

 Platform version: 7.1

 Product version: Beta 1330

 Supported board: mpu

 [Component]

 Component: system

 Description: system package

 

flash:/ssh-feature.bin

 [Package]

 Vendor: H3C

 Product: S5120V2

 Service name: ssh

 Platform version: 7.1

 Product version: Beta 1330

 Supported board: mpu

 [Component]

 Component: ssh

 Description: ssh package

For information about the command output, see Table 2.

Related commands

boot-loader file

install commit

install activate

Use install activate to activate feature or patch images.

Syntax

install activate feature filename&<1-30> slot slot-number

install activate patch filename { all | slot slot-number }

Views

User view

Predefined user roles

network-admin

Parameters

feature: Specifies a space-separated list of up to 30 feature image files.

patch: Specifies a patch image file.

filename: Specifies a .bin file in the filesystemname/filename.bin format. The file must be stored in the root directory of a file system on the device. Excluding the file system location section (if any), the value string can have a maximum of 63 characters. For more information about specifying a file, see file system management in Fundamentals Configuration Guide.

all: Specifies all IRF member devices.

slot slot-number: Specifies an IRF member device by its member ID.

Usage guidelines

This command activates images and adds the images to the current image list.

Images run in memory immediately after they are activated. However, only images activated by using the install activate patch filename all command still run in memory after a reboot. For other images to take effect after a reboot, you must commit the software change by using the install commit command.

If the image file is not on the member device to be upgraded, the install activate command automatically copies the image file to the member device.

Examples

# Activate system-patch.bin on IRF member device 1.

<Sysname> install activate system-patch.bin slot 1

Related commands

display install active

install commit

install deactivate

install commit

Use install commit to commit software changes.

Syntax

install commit

Views

User view

Predefined user roles

network-admin

Usage guidelines

This command adds the patch image file to the startup image list that the device used at startup.

·          If the device used the main startup software image list at startup, this command adds the patch image file to the main startup software image list.

·          If the device used the backup startup software image list at startup, this command adds the patch image file to the backup startup software image list.

After executing the install activate or install deactivate command, execute this command to make sure all software changes take effect at the next startup.

Examples

# Commit software changes.

<Sysname> install commit

This operation will take several minutes, please wait...........................Done.

Related commands

install activate

install deactivate

install deactivate

Use install deactivate to deactivate feature or patch images.

Syntax

install deactivate feature filename&<1-30> slot slot-number

install deactivate patch filename { all | slot slot-number }

Views

User view

Predefined user roles

network-admin

Parameters

feature: Specifies a space-separated list of up to 30 feature image files.

patch: Specifies a patch image file.

filename: Specifies a .bin file in the filesystemname/filename.bin format. The file must be stored in the root directory of a file system on the device. Excluding the file system location section (if any), the value string can have a maximum of 63 characters. For more information about specifying a file, see file system management in Fundamentals Configuration Guide.

all: Specifies all IRF member devices.

slot slot-number: Specifies an IRF member device by its member ID.

Usage guidelines

You can deactivate only active feature and patch images.

Images stop running in memory immediately after they are deactivated. However, only patch images deactivated by using the install deactivate patch filename all command do not run after a reboot. To prevent other deactivated images from running after a reboot, you must commit the software change by using the install commit command.

Examples

# Deactivate route-patch.bin on IRF member device 1.

<Sysname> install deactivate patch flash:/route-patch.bin slot 1

Related commands

display install active

 

  • Cloud & AI
  • InterConnect
  • Intelligent Computing
  • Security
  • SMB Products
  • Intelligent Terminal Products
  • Product Support Services
  • Technical Service Solutions
All Services
  • Resource Center
  • Policy
  • Online Help
All Support
  • Become a Partner
  • Partner Resources
  • Partner Business Management
All Partners
  • Profile
  • News & Events
  • Online Exhibition Center
  • Contact Us
All About Us
新华三官网