Login
- Table of Contents
-
- 01-Fundamentals Configuration Guide
- 00-Preface
- 01-CLI configuration
- 02-Login management configuration
- 03-RBAC configuration
- 04-FTP and TFTP configuration
- 05-File system management configuration
- 06-Configuration file management configuration
- 07-Software upgrade configuration
- 08-ISSU configuration
- 09-Emergency shell configuration
- 10-Device management configuration
- 11-Tcl configuration
- 12-Python configuration
- 13-License management
- 14-Preprovisioning feature configuration
- 15-Automatic configuration
- Related Documents
-
| Title | Size | Download |
|---|---|---|
| 14-Preprovisioning feature configuration | 29.71 KB |
Configuring preprovisioning
Preprovisioning allows you to preconfigure an offline module (an IRF member device that has not joined or has left the IRF fabric) and interfaces on the module.
With preprovisioning, you can configure a module before installing or attaching the module to the device. When the module comes online, the preprovisioned settings are applied. If the module goes offline, the existing preprovisioned settings are retained. You can continue to change the existing settings or add new settings. The final settings are applied when the module comes online again.
Enabling preprovisioning
The device automatically creates interfaces when preprovisioning is enabled for a module. The display interface command does not display these interfaces until the module comes online.
After preprovisioning is enabled for a module, you can configure the module and its interfaces. To verify the preprovisioned settings, see "Displaying and maintaining preprovisioned settings." For the preprovisioned settings to survive a reboot, you must use the save command to save the settings to the next-startup configuration file.
When you disable preprovisioning on a slot, the device removes all preprovisioned commands from the slot.
To enable preprovisioning on a slot:
|
Step |
Command |
Remarks |
|
1. Enter system view. |
system-view |
N/A |
|
2. Select the slot to preprovision and enter slot view. |
slot slot-number |
N/A |
|
3. Enable preprovisioning on the slot for an IRF member device. |
provision model model |
By default, preprovisioning is disabled. You must make sure the specified model matches the model of the IRF member device you want to preprovision. If the model information does not match, the IRF member device cannot come online. |
Displaying and maintaining preprovisioned settings
Execute display commands in any view. Execute reset commands in user view.
|
Task |
Command |
|
Display preprovisioned-commands application failure records. |
display provision failed-config |
|
Clear preprovisioned-commands application failure records. |
reset provision failed-config |
