01-Fundamentals Command Reference

HomeSupportSwitchesS6300 SeriesReference GuidesCommand ReferencesH3C S6300 Switch Series Command References-Release 243x-6W10001-Fundamentals Command Reference
14-Preprovisioning commands
Title Size Download
14-Preprovisioning commands 39.01 KB

Preprovisioning commands

display provision failed-config

Use display provision failed-config to display preprovisioned-commands application failure records.

Syntax

display provision failed-config

Views

Any view

Predefined user roles

network-admin

network-operator

Usage guidelines

A preprovisioned command cannot be applied if it conflicts with the running configuration.

Use this command to verify the application result of preprovisioned commands except for the following commands:

·     duplex

·     speed

·     sflow

To verify the application result of the listed commands, use the display current-configuration command. The display provision failed-config command might display incorrect application results for the listed commands.

Examples

# Display preprovisioned-commands application failure records.

<Sysname> display provision failed-config

Configuration applied at: Sat May 14 06:06:00 2016

Slot information: slot 1

Commands that failed to be applied:

#

interface Ten-GigabitEthernet1/0/1

 speed 10000

#

Related commands

provision

reset provision failed-config

provision

Use provision to enable preprovisioning.

Use undo provision to disable preprovisioning.

Syntax

provision model model

undo provision model

Default

Preprovisioning is disabled.

Views

Slot view

Predefined user roles

network-admin

Parameters

model model: Specifies the IRF member device or subcard model to be preprovisioned. To obtain available models, enter a question mark (?) for the model argument.

Usage guidelines

This command allows you to preconfigure an offline module and interfaces on the module. Modules include IRF member devices.

The device automatically creates interfaces when preprovisioning is enabled for a module. The display interface command does not display these interfaces until the module comes online.

When you disable preprovisioning on a slot, the device removes all preconfigured settings for the slot.

Examples

# Enable preprovisioning on slot 2.

<Sysname> system-view

[Sysname] slot 2

[Sysname-slot-2] provision model S6300-48S

Related commands

display provision failed-config

slot

reset provision failed-config

reset provision failed-config

Use reset provision failed-config to clear preprovisioned-commands application failure records.

Syntax

reset provision failed-config

Views

User view

Predefined user roles

network-admin

Usage guidelines

A preprovisioned IRF member device that repeatedly joins and leaves the IRF fabric might result in a number of preprovisioned-commands application failure records in memory. To release the occupied memory space, execute the reset provision failed-config command.

Examples

# Clear preprovisioned-commands application failure records.

<Sysname> reset provision failed-config

Related commands

display provision failed-config

provision

slot

Use slot to select a slot to provision and enter slot view.

Syntax

slot slot-number

Views

System view

Predefined user roles

network-admin

Parameters

slot-number: Specifies an IRF member device by its member ID.

Examples

# Enter the view of a slot.

<Sysname> system-view

[Sysname] slot 2

[Sysname-slot-2]

Related commands

provision

  • Cloud & AI
  • InterConnect
  • Intelligent Computing
  • Security
  • SMB Products
  • Intelligent Terminal Products
  • Product Support Services
  • Technical Service Solutions
All Services
  • Resource Center
  • Policy
  • Online Help
All Support
  • Become a Partner
  • Partner Resources
  • Partner Business Management
All Partners
  • Profile
  • News & Events
  • Online Exhibition Center
  • Contact Us
All About Us
新华三官网