08-ACL and QoS Configuration Guide

HomeSupportResource CenterSwitchesS12500X-AF SeriesS12500X-AF SeriesTechnical DocumentsConfigure & DeployConfiguration GuidesH3C S12500X-AF Switch Series Configuration Guides(R320x)-6W10008-ACL and QoS Configuration Guide
04-Time range configuration
Title Size Download
04-Time range configuration 52.96 KB

Configuring time ranges

About time ranges

You can implement a service based on the time of the day by applying a time range to it. A time-based service takes effect only in time periods specified by the time range. For example, you can implement time-based ACL rules by applying a time range to them.

The following basic types of time ranges are available:

·     Periodic time range—Recurs periodically on a day or days of the week.

·     Absolute time range—Represents only a period of time and does not recur.

The active period of a time range is calculated as follows:

1.     Combining all periodic statements.

2.     Combining all absolute statements.

3.     Taking the intersection of the two statement sets as the active period of the time range.

Restrictions and guidelines: Time range configuration

When you configure the ACL hardware mode, follow these restrictions and guidelines:

·     If a time range does not exist, the service based on the time range does not take effect.

·     You can create a maximum of 1024 time ranges, each with a maximum of 32 periodic statements and 12 absolute statements.


1.     Enter system view.


2.     Create or edit a time range.

time-range time-range-name { start-time to end-time days [ from time1 date1 ] [ to time2 date2 ] | from time1 date1 [ to time2 date2 ] | to time2 date2 }

If an existing time range name is provided, this command adds a statement to the time range.

Display and maintenance commands for time ranges

Execute the display command in any view.




Display time range configuration and status.

display time-range { time-range-name | all }


Time range configuration examples

Example: Configuring a time range

Network configuration

As shown in Figure 1, configure an ACL on the device to allow Host A to access the server only during 8:00 and 18:00 on working days from June 2015 to the end of the year.

Figure 1 Network diagram


# Create a periodic time range during 8:00 and 18:00 on working days from June 2015 to the end of the year.

<Device> system-view

[Device] time-range work 8:0 to 18:0 working-day from 0:0 6/1/2015 to 24:00 12/31/2015

# Create an IPv4 basic ACL numbered 2001, and configure a rule in the ACL to permit packets only from during the time range work.

[Device] acl basic 2001

[Device-acl-ipv4-basic-2001] rule permit source 0 time-range work

[Device-acl-ipv4-basic-2001] rule deny source any time-range work

[Device-acl-ipv4-basic-2001] quit

# Apply IPv4 basic ACL 2001 to filter outgoing packets on HundredGigE 1/0/2.

[Device] interface hundredgige 1/0/2

[Device-HundredGigE1/0/2] packet-filter 2001 outbound

[Device-HundredGigE1/0/2] quit

Verifying the configuration

# Verify that the time range work is active on the device.

[Device] display time-range all

Current time is 13:58:35 6/19/2015 Friday


Time-range : work (Active)

 08:00 to 18:00 working-day

 from 00:00 6/1/2015 to 00:00 1/1/2016

  • Cloud & AI
  • InterConnect
  • Intelligent Computing
  • Security
  • SMB Products
  • Intelligent Terminal Products
  • Product Support Services
  • Technical Service Solutions
All Services
  • Resource Center
  • Policy
  • Online Help
All Support
  • Become a Partner
  • Partner Resources
  • Partner Business Management
All Partners
  • Profile
  • News & Events
  • Online Exhibition Center
  • Contact Us
All About Us