01-Fundamentals Command Reference

HomeSupportResource CenterSwitchesS12500X-AF SeriesS12500X-AF SeriesTechnical DocumentsReference GuidesCommand ReferencesH3C S12500X-AF Switch Series Command References(R320x)-6W10001-Fundamentals Command Reference
09-Preprovisioning commands
Title Size Download
09-Preprovisioning commands 42.75 KB

Preprovisioning commands

chassis slot

Use chassis slot to select a slot to provision and enter slot view.

Syntax

chassis chassis-number slot slot-number

Views

System view

Predefined user roles

network-admin

Parameters

chassis chassis-number slot slot-number: Specifies an interface card slot on an IRF member device. The chassis-number argument represents the member ID of the IRF member device. The slot-number argument represents the slot number of the interface card to be preprovisioned.

Examples

# Enter the slot view of slot 1 in chassis 1.

<Sysname> system-view

[Sysname] chassis 1 slot 1

[Sysname-chassis-1-slot-1]

Related commands

provision

display provision failed-config

Use display provision failed-config to display preprovisioned-commands application failure records.

Syntax

display provision failed-config

Views

Any view

Predefined user roles

network-admin

network-operator

Usage guidelines

A preprovisioned command cannot be applied if it conflicts with the running configuration.

Use this command to verify the application result of preprovisioned commands except for the following commands:

·     duplex

·     location

·     speed

·     sflow

To verify the application result of the listed commands, use the display current-configuration command. The display provision failed-config command might display incorrect application results for the listed commands.

Examples

# Display preprovisioned-commands application failure records.

<Sysname> display provision failed-config

Configuration applied at: Sat Jun 14 06:06:00 2014

 

Slot information: slot 1

Commands that failed to be applied:

#

interface HundredGigE1/1/0/1

 speed 100000

#

Related commands

provision

reset provision failed-config

provision

Use provision to enable preprovisioning.

Use undo provision to disable preprovisioning.

Syntax

provision model model

undo provision model

Default

Preprovisioning is disabled.

Views

Slot view

Predefined user roles

network-admin

Parameters

model model: Specifies the card model to be preprovisioned. To obtain available models, enter a question mark (?) for the model argument.

Usage guidelines

This command allows you to enable preprovisioning on interface cards.

The device automatically creates interfaces when preprovisioning is enabled for an interface card. The display interface command will not display these interfaces until the card comes online. However, you can preprovision the interfaces.

When you disable preprovisioning on a slot, the device removes all preconfigured settings for the slot.

Examples

# Enable preprovisioning for the LSXM1CGQ36TD1 module on a slot.

<Sysname> system-view

[Sysname] slot 2

[Sysname-slot-2] provision model LSXM1CGQ36TD1

Related commands

chassis slot

display provision failed-config

reset provision failed-config

slot

reset provision failed-config

Use reset provision failed-config to clear preprovisioned-commands application failure records.

Syntax

reset provision failed-config

Views

User view

Predefined user roles

network-admin

Usage guidelines

The following events might result in a number of commands that were not applied in memory:

·     A preprovisioned interface card repeatedly comes online and goes offline.

·     A preprovisioned member device repeatedly joins and leaves the IRF fabric.

To release the occupied memory space, execute the reset provision failed-config command.

Examples

# Clear preprovisioned-commands application failure records.

<Sysname> reset provision failed-config

Related commands

display provision failed-config

provision

slot

Use slot to select a slot to provision and enter slot view.

Syntax

slot slot-number

Views

System view

Predefined user roles

network-admin

Parameters

slot-number: Specifies a slot number.

Examples

# Enter the view of a slot.

<Sysname> system-view

[Sysname] slot 2

[Sysname-slot-2]

Related commands

provision

  • Cloud & AI
  • InterConnect
  • Intelligent Computing
  • Security
  • SMB Products
  • Intelligent Terminal Products
  • Product Support Services
  • Technical Service Solutions
All Services
  • Resource Center
  • Policy
  • Online Help
All Support
  • Become a Partner
  • Partner Resources
  • Partner Business Management
All Partners
  • Profile
  • News & Events
  • Online Exhibition Center
  • Contact Us
All About Us
新华三官网