Feature navigator

Mobility Domain

Roaming

·          Display WLAN client roaming information and roaming group information.

·          Configure WLAN client roaming settings.

Network Interfaces

Interfaces

·          Display interfaces and their attributes, including:

¡  Interface status.

¡  IP address.

¡  Speed and duplex mode.

¡  Interface description.

·          Delete logical interfaces.

·          Modify interfaces.

Link Aggregation

Create, modify, or delete Layer 2 aggregation groups.

VLAN

VLAN

·          Configure port-based VLANs.

·          Create VLAN-interfaces.

MAC

·          Create or delete static MAC entries, dynamic MAC entries, and blackhole MAC entries.

·          Display existing MAC entries.

STP

·          Enable or disable STP globally.

·          Enable or disable STP on interfaces.

·          Configure the STP operating mode as STP, RSTP, PVST, or MSTP.

·          Configure instance priorities.

·          Configure MST regions.

Network Routing

Routing Table

Display IPv4 and IPv6 routing table information, including brief routing table information and route statistics.

Static Routing

·          Display IPv4 and IPv6 static routing entries.

·          Create, modify, or delete IPv4 and IPv6 static routing entries.

Network Services-IP Services

IP

·          Configure the method to obtain an IP address (DHCP or static).

·          Configure the IP address or MTU of an interface.

·          Create a loopback interface.

IPv6

·          Configure the method to obtain an IPv6 address (manual assignment, dynamic assignment, or auto generation).

·          Configure the IPv6 address of an interface.

·          Create a loopback interface.

Network Services-DHCP/DNS

DHCP

·          Configure DHCP server functions, including:

¡  Configure DHCP services.

¡  Configure the interface to operate in the DHCP server mode.

¡  Configure DHCP address pools.

¡  Configure IP address conflict detection.

·          Configure DHCP relay agent functions, including:

¡  Configure DHCP services.

¡  Configure the DHCP relay agent mode.

¡  Configure the IP address of the DHCP server.

·          Configure settings for DHCP relay entry, include:

¡  Recording of DHCP relay entries.

¡  Periodic refreshing of DHCP relay entries.

¡  Interval for refreshing DHCP relay entries.

DHCP Snooping

·          Configure a port as a trusted or untrusted port.

·          Record and back up DHCP snooping entries.

·          Configure the following features for DHCP snooping ports:

¡  MAC address check.

¡  DHCP-REQUEST check.

¡  DHCP packet rate limit.

¡  Max DHCP snooping entries.

·          Enable support for Option 82. If Option 82 is enabled, you can configure the handling strategy, the padding format, and the padding contents for Option 82.

IPv4 DNS

·          Configure IPv4 static domain name resolution.

·          Configure IPv4 dynamic domain name resolution.

·          Configure the DNS proxy.

·          Configure IPv4 domain name suffixes.

Dynamic DNS

·          Manage dynamic DNS policies.

·          Configure an interface to be associated with the dynamic DNS policy.

IPv6 DNS

·          Configure static and dynamic IPv6 domain name resolution.

·          Configure the IPv6 DNS proxy.

·          Configure IPv6 domain name suffixes.

Network Services-Multicast

IGMP Snooping

Configure IGMP snooping functions, including:

·          Enable or disable IGMP snooping in a VLAN.

·          Query IGMP snooping entries.

·          Enable dropping unknown multicast data.

·          Configure the IGMP snooping querier.

·          Enable fast-leave processing.

·          Set the maximum number of multicast groups on a port.

MLD Snooping

Configure MLD snooping functions, including:

·          Enable or disable MLD snooping in a VLAN.

·          Query MLD snooping entries.

·          Enable dropping unknown IPv6 multicast data.

·          Configure the MLD snooping querier.

·          Enable fast-leave processing.

·          Set the maximum number of IPv6 multicast groups on a port.

Network Services-ARP

ARP

·          Add static ARP entries.

·          Delete dynamic ARP entries and static ARP entries.

·          Configure the ARP proxy.

·          Configure gratuitous ARP.

·          Configure ARP attack protection.

Network Services-ND

ND

·          Add static ND entries.

·          Delete dynamic ND entries and static ND entries.

·          Configure the aging time for stale ND entries.

·          Enable or disable link local ND entry minimization.

·          Configure hop limit.

·          Configure RA prefix attributes, including:

¡  Address prefix.

¡  Prefix length.

¡  Valid lifetime.

¡  Preferred lifetime.

·          Configure RA settings for an interface, including:

¡  RA message suppression.

¡  Maximum and minimum intervals for sending RA messages.

¡  M-flag.

¡  MTU option.

¡  Hop limit.

¡  O-flag.

¡  Router lifetime.

¡  NS message retransmit interval.

¡  Router preference.

¡  Neighbor reachable time.

·          Enable common and local ND proxy on an interface.

·          Configure ND rules for the interface, including:

¡  Maximum number of dynamic neighbor entries.

¡  Maximum number of DAD attempts.

Network Services-NAT

NAT

·          Configure dynamic and static NAT, internal servers, and dynamic and static NAT444.

·          Configure NAT address groups, NAT444 address groups, port block groups, and server groups.

·          Configure PAT mode, DNS mappings, and NAT hairpin.

·          Enable NAT ALG.

·          Display NAT logs.

Network Services-Management Protocols

HTTP/HTTPS

·          Enable or disable HTTP service.

·          Enable or disable HTTPS service.

·          Set the Web connection timeout.

·          Set the HTTP service port number.

·          Set the HTTPS service port number.

·          Specify Web access control ACLs.

FTP

·          Enable or disable FTP service.

·          Set the DSCP value for the device to use for outgoing FTP packets.

·          Specify FTP access control ACLs.

·          Set the FTP connection idle timeout.

·          Configure SSL service policies.

Telnet

·          Enable or disable Telnet service.

·          Set the DSCP values for the device to use for outgoing IPv4 or IPv6 Telnet packets.

·          Specify Telnet access control ACLs.

SSH

·          Enable or disable the Stelnet, SFTP, and SCP services.

·          Configure SSH parameters.

NTP

·          Enable or disable the NTP service.

·          Configure the IP address and stratum level of the local clock.

·          Set an NTP authentication key.

LLDP

·          Enable or disable LLDP.

·          Enable or disable CDP compatibility.

·          Configure LLDP parameters.

·          Display interface status.

·          Configure the interface status.

·          Display LLDP neighbors.

·          Configure LLDP to advertise the specified TLVs.

Settings

·          Enable or disable log output to the log buffer, and configure the maximum number of logs in the log buffer.

·          Configure the address and port number of log hosts.

Packet Filter

Packet Filter

·          Create, modify, or delete a packet filter for an interface, a VLAN, or the system.

·          Configure the default action for the packet filter.

Traffic Policy

QoS Policies

·          Create, modify, or delete interface QoS policies.

·          Create, modify, or delete VLAN QoS policies.

·          Create, modify, or delete global QoS policies.

Priority Mapping

·          Query or configure the port priority.

·          Configure the priority trust mode for a port.

·          Query or modify the 802.1p-to-local priority mapping table.

·          Query or modify the DSCP-to-802.1p priority mapping table.

·          Query or modify the DSCP-to-DSCP priority mapping table.

Access Control

802.1X

·          Enable or disable 802.1X.

·          Configure the 802.1X authentication method.

·          Configure the port access control method.

·          Configure the maximum number of concurrent 802.1X users on the port.

·          Configure advanced 802.1X features.

Authentication

ISP Domains

Configure ISP domains.

RADIUS

Configure RADIUS schemes.

User Management

Local Users

·          Add, modify, delete, import, or export local users.

·          Add, modify, or delete local user groups.

Event Logs

Event Logs

Query, collect, or delete log information.

Resource

IPv4 ACL

·          Create, modify, or delete an IPv4 basic ACL.

·          Create, modify, or delete an IPv4 advanced ACL.

IPv6 ACL

·          Create, modify, or delete an IPv6 basic ACL.

·          Create, modify, or delete an IPv6 advanced ACL.

Ethernet

Create, modify, or delete an Ethernet frame header ACL.

Time range

Create, modify, or delete a time range.

Administrators

Administrators

·          Create, modify, or delete roles.

·          Create, modify, or delete administrators.

·          Configure the role of administrators.

·          Control administrator access authority.

·          Manage passwords.

Management

Settings

·          Set the name, location, and contact information of the device.

·          Set the system time.

Configuration

·          Save or export the running configuration.

·          Import configuration.

·          Display the running configuration.

·          Restore the settings to the factory defaults.

Upgrade

·          Upgrade system software.

·          Display system software lists, including:

¡  List of software enabled at the current system startup.

¡  List of main software to be enabled at the next system startup.

Reboot

Reboot the device.

About

Display basic device information, including device name, serial number, model, description, location, contact information, version, electronic label, and statement.

Debug

Diagnostics

Collect diagnostic information for locating problems.

Add New AP

Add New AP

Add new APs manually.

Add New SSID

Add New SSID

·          Configure wireless services.

·          Configure link layer authentication.

·          Enable or disable authorization.

·          Enable or disable intrusion detection.

·          Configure key management.

·          Bind APs.

Add New User

Add New User

Add new users.

Wireless Networks

Wireless Services

Display wireless services.

Access Points

APs

Display AP statistics.

AP Groups

Display AP groups.

Clients

Clients

Display client statistics.

Wireless Security

WIPS

Display WIPS statistics.

RRM

RF Optimization

Display channel and power adjustment information.

Spectrum Analysis

Display detailed information about spectrum analysis.

Client Proximity Sensor

Client Proximity Sensor

Display client proximity sensor information.

Application Monitoring

Bonjour

·          Display Bonjour service information discovered by Bonjour gateways.

·          Clear Bonjour service resource information.

Multicast Optimization

Display IPv4 and IPv6 multicast statistics.

Wireless Networks

Wireless Networks

·          Display wireless services.

·          Add, delete, or modify wireless services.

·          Configure link layer authentication.

·          Enable or disable authorization and intrusion detection.

·          Manage keys.

·          Bind APs.

AP Management

AP

Add, modify, delete, or query APs.

AP Groups

Create, query, modify, or delete AP groups.

AP Global Settings

·          Configure AP region codes.

·          Enable or disable region code lock.

·          Enable or disable AP software upgrade.

·          Enable or disable auto AP.

·          Enable or disable auto-AP persistence.

AP Provisioning

Display or modify AP preprovisioned settings.

AP Group Provisioning

Display or modify AP group preprovisioned settings.

Wireless QoS

Client Rate Limiting

·          Display detailed information about client rate limit.

·          Configure client-type-based client rate limit.

·          Configure service-based client rate limit.

·          Configure AP radio or AP group radio-based client rate limit.

Bandwidth Guaranteeing

·          Display detailed information about intelligent bandwidth guarantee.

·          Set the maximum radio bandwidth.

·          Configure intelligent bandwidth guarantee for an AP or AP group.

Wi-Fi Multimedia

·          Display wireless QoS status and information.

·          Display radio EDCA parameters.

·          Display radio and client negotiation parameters.

·          Display WMM statistics for clients.

·          Display transport stream information.

Wireless Security

WIPS

·          Display detailed WIPS information.

·          Enable WIPS.

·          Configure VSDs.

·          Configure classification policies.

·          Configure attack detection policies.

·          Configure signature policies.

·          Configure countermeasure policies.

·          Configure AP classification rules.

·          Configure signatures.

·          Add MAC addresses to the alarm-ignored device list.

Whitelist and blacklist

·          Configure whitelists.

·          Configure static and dynamic blacklists.

Radio Management

Radio Configuration

Display detailed model and radio information for all APs in an AP group.

RRM

·          Display channel and power adjustment information.

·          One-key channel and power optimization.

·          Configure RRM for APs and AP groups:

¡  Configure RRM holddown groups.

¡  Configure radio baselines.

·          Display RRM adjustment history.

Spectrum Analysis

·          Enable spectrum analysis.

·          Configure interference device type.

·          Import feature database files.

·          Configure the alarming feature.

Load Balancing

·          Enable load balancing.

·          Configure the load balancing mode.

·          Configure load balancing groups.

·          Configure load balancing parameters.

Band Navigation

·          Enable or disable global band navigation.

·          Enable or disable band navigation for APs and AP groups.

·          Configure band navigation parameters.

Client Proximity Sensor

Client Proximity Sensor

·          Enable or disable client proximity sensor.

·          Display client proximity sensor information.

Applications

Multicast Optimization

·          Display IPv4 multicast optimization.

·          Configure IPv4 multicast optimization.

·          Display IPv6 multicast optimization.

·          Configure IPv6 multicast optimization.

Location Aware

·          Configure global packet rate limit, packet filtering, and packet dilution.

·          Configure Aeroscout locating, bluetooth locating, CUPID locating, fingerprinting, and Internet of Things (IoT) locating.

Bonjour

·          Enable or disable the Bonjour gateway feature.

·          Create and activate Bonjour service types.

·          Change the Bonjour gateway mode.

·          Configure Bonjour policies.

Packet Filter

Packet Filter

·          Create, modify, or delete a packet filter for an interface or a VLAN, or the system.

·          Configure the default action for the packet filter.

Traffic Policy

QoS Policies

·          Create, modify, or delete interface QoS policies.

·          Create, modify, or delete VLAN QoS policies.

·          Create, modify, or delete global QoS policies.

Priority Mapping

·          Query and configure the port priority.

·          Configure the priority trust mode for a port.

·          Query and modify the 802.1p-to-local priority mapping table.

·          Query and modify the DSCP-to-802.1p priority mapping table.

·          Query and modify the DSCP-to-DSCP priority mapping table.

Access Control

802.1X

·          Enable or disable 802.1X.

·          Configure the 802.1X authentication method.

·          Configure the port access control method.

·          Configure the maximum number of concurrent 802.1X users on the port.

·          Configure advanced 802.1X features.

Authentication

ISP Domains

Configure ISP domains.

RADIUS

Configure RADIUS schemes.

BYOD

BYOD DB

·          Display DHCP rules, HTTP rules, and MAC rules.

·          Configure DHCP rules, HTTP rules, and MAC rules.

BYOD Authorization

Query or modify BYOD authorization.

User Management

Local Users

·          Add, modify, delete, import, or export local users.

·          Add or modify local user groups.

Guest Management

Guest List

Query, add, or export guests.

Import Guests

Import guests.

Generate Guest Accounts

Generate guests in bulk.

Approve Guest

Approve guests.

Guest Configuration

Configure guest parameters.

Access Control

Port Security

Configure port security features.

Portal

Configure portal authentication.

Resource

IPv4 ACL

·          Create basic or advanced IPv4 ACLs.

·          Modify or delete ACLs on this page and other service module pages, such as the packet filtering page.

IPv6 ACL

·          Create basic or advanced IPv6 ACLs.

·          Modify or delete ACLs on this page and other service module pages, such as the packet filtering page.

Ethernet

·          Create Ethernet ACLs.

·          Modify or delete ACLs on this page and other service module pages, such as the packet filtering page.

Time range

Create, modify, or delete time ranges.

Wireless Capture

Wireless Capture

Display captured wireless packets.

RF Ping

RF Ping

Perform wireless link quality detection.

Debug

Diagnostics

Collect diagnostic information for locating problems.

Client Statistics

AC Frame

Display transmitted/received/dropped AC frames.

AC Bytes

Display transmitted/received/dropped AC bytes.

Total Frame

Display total transmitted, received, and dropped frames.

Total Bytes

Display total transmitted, received, and dropped bytes.

AP Statistics

AP Statistics

Display AP statistics.

Wireless Service Statistics

Wireless Service Statistics

Display wireless service statistics.