Login
- Table of Contents
-
- 03-Layer 2 Command Reference
- 00-Preface
- 01-Ethernet Interface Commands
- 02-Loopback and Null Interface Commands
- 03-VLAN Commands
- 04-MAC Address Table Commands
- 05-Ethernet Link Aggregation Commands
- 06-Spanning Tree Commands
- 07-Layer 2 Forwarding Commands
- 08-PPPoE Commands
- 09-FPGA Fast Forwarding Commands
- 10-QinQ Termination Commands
- Related Documents
-
| Title | Size | Download |
|---|---|---|
| 09-FPGA Fast Forwarding Commands | 30.11 KB |
FPGA fast forwarding configuration commands
Support for the commands depends on the device model. For more information, see About the H3C Access Controllers Command References.
fpga portal-statistics enable
Use fpga portal-statistics enable to enable portal user traffic statistics for FPGA fast forwarding.
Use undo fpga portal-statistics enable to disable portal user traffic statistics for FPGA fast forwarding.
Syntax
fpga portal-statistics enable
undo fpga portal-statistics enable
Default
Portal user traffic statistics for FPGA fast forwarding is enabled.
Views
System view
Default command level
2: System level
Examples
# Disable portal user traffic statistics for FPGA fast forwarding.
<sysname> system-view
[sysname] undo fpga portal-statistics enable
fpga work-mode fast-forwarding
Use fpga work-mode fast-forwarding to enable FPGA fast forwarding.
Use undo fpga work-mode fast-forwarding to disable FPGA fast forwarding.
Syntax
fpga work-mode fast-forwarding
undo fpga work-mode fast-forwarding
Default
FPGA fast forwarding is enabled.
Views
System view
Default command level
3: Manage level
Examples
# Enable FPGA fast forwarding on an AC.
<Sysname> system-view
[Sysname] fpga work-mode fast-forwarding
