12-Network Management and Monitoring Command Reference

HomeSupportSwitchesS7500E SeriesReference GuidesCommand ReferencesH3C S7500E Switch Series Command References-R757X-GL-6W10012-Network Management and Monitoring Command Reference
02-NQA commands
Title Size Download
02-NQA commands 298.62 KB

Contents

NQA commands· 1

NQA client commands· 1

advantage-factor 1

codec-type· 1

community read· 2

data-fill 3

data-size· 4

description· 5

destination host 6

destination ip· 6

destination ipv6· 7

destination port 8

display nqa history· 9

display nqa reaction counters· 10

display nqa result 12

display nqa statistics· 20

expect data· 29

expect ip· 29

expect ipv6· 30

expect status· 31

filename· 31

frequency· 32

history-record enable· 33

history-record keep-time· 34

history-record number 34

init-ttl 35

key· 36

lsr-path· 36

max-failure· 37

mode· 38

next-hop ip· 39

next-hop ipv6· 39

no-fragment enable· 40

nqa· 41

nqa agent enable· 41

nqa schedule· 42

nqa template· 43

operation (FTP operation view) 44

operation (HTTP/HTTPS operation view) 45

out interface· 46

password· 46

probe count 47

probe packet-interval 49

probe packet-number 49

probe packet-timeout 50

probe timeout 51

raw-request 52

reaction checked-element { jitter-ds | jitter-sd } 52

reaction checked-element { owd-ds | owd-sd } 54

reaction checked-element icpif 55

reaction checked-element mos· 56

reaction checked-element packet-loss· 57

reaction checked-element probe-duration· 58

reaction checked-element probe-fail (for trap) 60

reaction checked-element probe-fail (for trigger) 61

reaction checked-element rtt 62

reaction trap· 63

reaction trigger per-probe· 64

reaction trigger probe-fail 65

reaction trigger probe-pass· 66

resolve-target 67

resolve-type· 67

route-option bypass-route· 68

source interface (ICMP echo/UDP tracert operation view) 69

source ip· 70

source ipv6· 71

source port 71

ssl-client-policy· 72

statistics hold-time· 73

statistics interval 73

statistics max-group· 74

target-only· 75

tos· 75

ttl 76

type· 77

url 78

username· 79

version· 80

vpn-instance· 80

NQA server commands· 81

display nqa server 81

nqa server enable· 82

nqa server tcp-connect 83

nqa server udp-echo· 84

 


NQA commands

NQA client commands

advantage-factor

Use advantage-factor to set the advantage factor to be used for calculating Mean Opinion Scores (MOS) and Calculated Planning Impairment Factor (ICPIF) values.

Use undo advantage-factor to restore the default.

Syntax

advantage-factor factor

undo advantage-factor

Default

The advantage factor is 0.

Views

Voice operation view

Predefined user roles

network-admin

mdc-admin

Parameters

factor: Specifies the advantage factor in the range of 0 to 20.

Usage guidelines

The evaluation of voice quality depends on users' tolerance for voice quality. For users with higher tolerance for voice quality, use the advantage-factor command to set an advantage factor. When the system calculates the ICPIF value, it subtracts the advantage factor to modify ICPIF and MOS values for voice quality evaluation.

Examples

# Set the advantage factor to 10 for the voice operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type voice

[Sysname-nqa-admin-test-voice] advantage-factor 10

codec-type

Use codec-type to configure the codec type for the voice operation.

Use undo codec-type to restore the default.

Syntax

codec-type { g711a | g711u | g729a }

undo codec-type

Default

The codec type for the voice operation is G.711 A-law.

Views

Voice operation view

Predefined user roles

network-admin

mdc-admin

Parameters

g711a: Specifies G.711 A-law codec type.

g711u: Specifies G.711 µ-law codec type

g729a: Specifies G.729 A-law codec type.

Examples

# Set the codec type to g729a for the voice operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type voice

[Sysname-nqa-admin-test-voice] codec-type g729a

community read

Use community read to specify the community name for the SNMP operation.

Use undo community read to restore the default.

Syntax

community read { cipher | simple } community-name

undo community read

Default

The SNMP operation uses the community name public.

Views

SNMP operation view

Predefined user roles

network-admin

mdc-admin

Parameters

cipher: Specifies a community name in encrypted form.

simple: Specifies a community name in plaintext form. For security purposes, the community name specified in plaintext form will be stored in encrypted form.

community-name: Specifies the community name. Its plaintext form is a case-sensitive string of 1 to 32 characters. Its encrypted form is a case-sensitive string of 33 to 73 characters.

Usage guidelines

You must specify the community name for the SNMP operation when both of the following conditions exist:

·     The SNMP operation uses the SNMPv1 or SNMPv2c agent.

·     The SNMPv1 or SNMPv2c agent is configured with a read-only or read-write community name.

The specified community name must be the same as the community name configured on the SNMP agent.

The community name configuration is not required if the SNMP operation uses the SNMPv3 agent.

For more information about SNMP, see "Configuring SNMP."

Examples

# Specify readaccess as the community name for the SNMP operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type snmp

[Sysname-nqa-admin-test-snmp] community read simple readaccess

data-fill

Use data-fill to configure the payload fill string for probe packets.

Use undo data-fill to restore the default.

Syntax

data-fill string

undo data-fill

Default

The default payload fill string is the hexadecimal string 00010203040506070809.

Views

ICMP/UDP echo operation view

Path jitter/UDP jitter/voice operation view

ICMP/TCP/UDP template view

Predefined user roles

network-admin

mdc-admin

Parameters

string: Specifies a case-sensitive string of 1 to 200 characters.

Usage guidelines

If the payload length is smaller than the string length, only the first part of the string is filled. For example, if you configure the string as abcd and set the payload size to 3 bytes, abc is filled.

If the payload length is greater than the string length, the system fills the payload with the string cyclically until the payload is full. For example, if you configure the string as abcd and the payload size as 6 bytes, abcdab is filled.

How the string is filled depends on the operation type.

·     For the ICMP echo operation, the string fills the whole payload of an ICMP echo request.

·     For the UDP echo operation, the first five bytes of the payload of a UDP packet are for special purpose. The string fills the remaining part of payload.

·     For the UDP jitter operation, the first 68 bytes of the payload of a UDP packet are for special purpose. The string fills the remaining part of the payload.

·     For the voice operation, the first 16 bytes of the payload of a UDP packet are for special purpose. The string fills the remaining part of the payload.

·     For the path jitter operation, the first four bytes of the payload of an ICMP echo request are for special purpose. The string fills the remaining part of payload.

Examples

# Specify abcd as the payload fill string for ICMP echo requests.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] data-fill abcd

# In TCP template view, specify abcd as the payload fill string for probe packets.

<Sysname> system-view

[Sysname] nqa template tcp tcptplt

[Sysname-nqatplt-tcp-tcptplt] data-fill abcd

data-size

Use data-size to set the payload size for each probe packet.

Use undo data-size to restore the default.

Syntax

data-size size

undo data-size

Default

The default payload size of a probe packet for different operations is described in Table 1.

Table 1 Default payload size of a probe packet

Operation type

Codec type

Default size (bytes)

ICMP echo

N/A

100

UDP echo

N/A

100

UDP jitter

N/A

100

UDP tracert

N/A

100

Path jitter

N/A

100

Voice

G.711 A-law

172

Voice

G.711 µ-law

172

Voice

G.729 A-law

32

 

Views

ICMP/UDP echo operation view

UDP tracert operation view

Path jitter/UDP jitter/voice operation view

ICMP/UDP template view

Predefined user roles

network-admin

mdc-admin

Parameters

size: Specifies the payload size. Available value ranges include:

·     20 to 65507 bytes for the ICMP echo, UDP echo, or UDP tracert operation.

·     68 to 65507 bytes for the UDP jitter or path jitter operation.

·     16 to 65507 bytes for the voice operation.

Usage guidelines

In ICMP echo and path jitter operations, the command sets the payload size for each ICMP echo request.

In UDP echo, UDP jitter, UDP tracert, and voice operations, the command sets the payload size for each UDP packet.

Examples

# Set the payload size to 80 bytes for each ICMP echo request.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] data-size 80

# In ICMP template view, set the payload size to 80 bytes for each probe packet.

<Sysname> system-view

[Sysname] nqa template icmp icmptplt

[Sysname-nqatplt-icmp-icmptplt] data-size 80

description

Use description to configure a description for an NQA operation, such as the operation type or purpose.

Use undo description to restore the default.

Syntax

description text

undo description

Default

No description is configured for an NQA operation.

Views

Any NQA operation view

Any NQA template view

Predefined user roles

network-admin

mdc-admin

Parameters

text: Specifies a description, a case-sensitive string of 1 to 200 characters.

Examples

# Configure the description as icmp-probe for the ICMP echo operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] description icmp-probe

# In ICMP template view, configure the description as icmp-probe for the NQA operation.

<Sysname> system-view

[Sysname] nqa template icmp icmptplt

[Sysname-nqatplt-icmp-icmptplt] description icmp-probe

destination host

Use destination host to configure the destination host name for the operation.

Use undo destination host to restore the default.

Syntax

destination host host-name

undo destination host

Default

No destination host name is configured for the operation.

Views

UDP tracert operation view

Predefined user roles

network-admin

mdc-admin

Parameters

host-name: Specifies the destination host name, a case-sensitive string of 1 to 254 characters. The host name can contain letters, digits, hyphens (-), underscores (_), and dots (.), but consecutive dots (.) are not allowed. If the host name is a series of dot-separated labels, each label can contain a maximum of 63 characters.

Examples

# Specify www.test.com as the destination host name for the UDP tracert operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type udp-tracert

[Sysname-nqa-admin-test-udp-tracert] destination host www.test.com

destination ip

Use destination ip to configure the destination IPv4 address for the operation.

Use undo destination ip to restore the default.

Syntax

destination ip ip-address

undo destination ip

Default

No destination IPv4 address is configured for an operation.

Views

ICMP echo/TCP/UDP echo operation view

DHCP/DLSw/DNS/SNMP operation view

UDP tracert operation view

ICMP jitter/path jitter/UDP jitter/voice operation view

DNS/ICMP/RADIUS/SSL/TCP/TCP half open/UDP template view

Predefined user roles

network-admin

mdc-admin

Parameters

ip-address: Specifies the destination IPv4 address for the operation.

Examples

# Specify 10.1.1.1 as the destination IPv4 address for the ICMP echo operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] destination ip 10.1.1.1

# In ICMP template view, specify 10.1.1.1 as the destination IPv4 address for the ICMP echo operation.

<Sysname> system-view

[Sysname] nqa template icmp icmptplt

[Sysname-nqatplt-icmp-icmptplt] destination ip 10.1.1.1

destination ipv6

Use destination ipv6 to configure the destination IPv6 address for the operation.

Use undo destination ipv6 to restore the default.

Syntax

destination ipv6 ipv6-address

undo destination ipv6

Default

No destination IPv6 address is configured for an operation.

Views

ICMP echo operation view

DNS/ICMP/RADIUS/SSL/TCP/TCP half open/UDP template view

Predefined user roles

network-admin

mdc-admin

Parameters

ipv6-address: Specifies the destination IPv6 address for the operation. IPv6 link-local addresses are not supported.

Examples

# Specify 1::1 as the destination IPv6 address for the ICMP echo operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] destination ipv6 1::1

# In ICMP template view, specify 1::1 as the destination IPv6 address for the operation.

<Sysname> system-view

[Sysname] nqa template icmp icmptplt

[Sysname-nqatplt-icmp-icmptplt] destination ipv6 1::1

destination port

Use destination port to configure the destination port number for the operation.

Use undo destination port to restore the default.

Syntax

destination port port-number

undo destination port

Default

The destination port number is 33434 for the UDP tracert operation and 161 for the SNMP operation.

The destination port numbers for the operations that use the following NQA templates are:

·     53 for the DNS template.

·     1812 for the RADIUS template.

No destination port number is configured for other types of operations.

Views

TCP/UDP echo operation view

UDP tracert operation view

UDP jitter/voice operation view

DNS/RADIUS/SSL/TCP/UDP template view

Predefined user roles

network-admin

mdc-admin

Parameters

port-number: Specifies the destination port number for the operation, in the range of 1 to 65535.

Examples

# Set the destination port number to 9000 for the UDP echo operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type udp-echo

[Sysname-nqa-admin-test-udp-echo] destination port 9000

# In TCP template view, set the destination port number to 9000 for the NQA operation.

<Sysname> system-view

[Sysname] nqa template tcp tcptplt

[Sysname-nqatplt-tcp-tcptplt] destination port 9000

display nqa history

Use display nqa history to display the history records of NQA operations.

Syntax

display nqa history [ admin-name operation-tag ]

Views

Any view

Predefined user roles

network-admin

network-operator

mdc-admin

mdc-operator

Parameters

admin-name operation-tag: Specifies an NQA operation by its administrator name and operation tag. The admin-name argument represents the name of the administrator who creates the NQA operation. The operation-tag argument represents the operation tag. Each of the arguments is a case-insensitive string of 1 to 32 characters that cannot contain hyphens (-). If you do not specify an NQA operation, the command displays the history records of all NQA operations.

Usage guidelines

The display nqa history command does not display the results or statistics of the following operations:

·     ICMP jitter.

·     Path jitter.

·     UDP jitter.

·     Voice.

To view the results or statistics of the ICMP jitter, path jitter, UDP jitter, and voice operations, use the display nqa result or display nqa statistics command.

Examples

# Display the history records of the UDP tracert operation with administrator name administrator and operation tag tracert.

<Sysname> display nqa history administrator tracert

NQA entry (admin administrator, tag tracert) history records:

Index      TTL  Response  Hop IP          Status          Time

1          2    328       4.1.1.1         Succeeded       2013-09-09 14:46:06.2

1          2    328       4.1.1.1         Succeeded       2013-09-09 14:46:05.2

1          2    328       4.1.1.1         Succeeded       2013-09-09 14:46:04.2

1          1    328       3.1.1.2         Succeeded       2013-09-09 14:46:03.2

1          1    328       3.1.1.1         Succeeded       2013-09-09 14:46:02.2

1          1    328       3.1.1.1         Succeeded       2013-09-09 14:46:01.2

# Display the history records of the NQA operation with administrator name administrator and operation tag test.

<Sysname> display nqa history administrator test

NQA entry (admin administrator, tag test) history records:

  Index      Response     Status           Time

  10         329          Succeeded        2011-04-29 20:54:26.5

  9          344          Succeeded        2011-04-29 20:54:26.2

  8          328          Succeeded        2011-04-29 20:54:25.8

  7          328          Succeeded        2011-04-29 20:54:25.5

  6          328          Succeeded        2011-04-29 20:54:25.1

  5          328          Succeeded        2011-04-29 20:54:24.8

  4          328          Succeeded        2011-04-29 20:54:24.5

  3          328          Succeeded        2011-04-29 20:54:24.1

  2          328          Succeeded        2011-04-29 20:54:23.8

  1          328          Succeeded        2011-04-29 20:54:23.4

Table 2 Command output

Field

Description

Index

History record ID.

The history records in one UDP tracert operation have the same ID.

TTL

If the routing table bypass feature is not enabled in the operation, this field displays the TTL value in the probe packet.

If the routing table bypass feature is enabled, this field displays the TTL value configured by using the init-ttl command. However, the actual TTL value in the probe packet is fixed at 1.

Response

Round-trip time if the operation succeeds, timeout time upon timeout, or 0 if the operation cannot be completed, in milliseconds.

Hop IP

IP address of the node that sent the reply packet.

Status

Status of the operation result:

·     Succeeded.

·     Unknown error.

·     Internal error.

·     Timeout.

Time

Time when the operation was completed.

 

display nqa reaction counters

Use display nqa reaction counters to display the current monitoring results of reaction entries.

Syntax

display nqa reaction counters [ admin-name operation-tag [ item-number ] ]

Views

Any view

Predefined user roles

network-admin

network-operator

mdc-admin

mdc-operator

Parameters

admin-name operation-tag: Specifies an NQA operation by its administrator name and operation tag. The admin-name argument represents the name of the administrator who creates the NQA operation. The operation-tag argument represents the operation tag. Each of the arguments is a case-insensitive string of 1 to 32 characters that cannot contain hyphens (-). If you do not specify an NQA operation, the command displays the current monitoring results of reaction entries for all NQA operations.

item-number: Specifies a reaction entry by its ID in the range of 1 to 10. If you do not specify a reaction entry, the command displays the results of all reaction entries.

Usage guidelines

The result fields display hyphens (-) in one of the following conditions:

·     The threshold type is the average value.

·     The monitored performance metric is ICPIF or MOS of the voice operation.

The monitoring results of an operation are accumulated, and are not cleared after the operation completes.

Examples

# Display the monitoring results of all reaction entries of the ICMP echo operation with administrator name admin and operation tag test.

<Sysname> display nqa reaction counters admin test

NQA entry (admin admin, tag test) reaction counters:

  Index  Checked Element  Threshold Type  Checked Num  Over-threshold Num

  1      probe-duration   accumulate      12           4

  2      probe-duration   average         -            -

  3      probe-duration   consecutive     160          56

  4      probe-fail       accumulate      12           0

  5      probe-fail       consecutive     162          2

Table 3 Command output

Field

Description

Index

ID of a reaction entry.

Checked Element

Monitored performance metric.

The available performance metrics vary by NQA operation type. For more information, see Table 4 and Table 5.

Threshold Type

Threshold type.

Checked Num

Number of targets that have been monitored for data collection.

Over-threshold Num

Number of threshold violations.

 

Table 4 Monitored performance metrics for DHCP/DLSw/DNS/FTP/HTTP/ICMP echo/SNMP/TCP/UDP echo operations

Monitored performance metric

Threshold type

Collect data in

Checked Num

Over-threshold Num

probe-duration

accumulate

Probes after the operation starts.

Number of completed probes.

Number of probes with duration exceeding the threshold.

average

N/A

N/A

N/A

consecutive

Probes after the operation starts.

Number of completed probes.

Number of probes with duration exceeding the threshold.

probe-fail

accumulate

Probes after the operation starts.

Number of completed probes.

Number of probe failures.

consecutive

Probes after the operation starts.

Number of completed probes.

Number of probe failures.

 

Table 5 Monitored performance metrics for ICMP jitter/UDP jitter/voice operations

Monitored performance metric

Threshold type

Collect data in

Checked Num

Over-threshold Num

RTT

accumulate

Packets sent after the operation starts.

Number of sent packets.

Number of packets with round-trip time exceeding threshold.

average

N/A

N/A

N/A

jitter-DS/jitter-SD

accumulate

Packets sent after the operation starts.

Number of sent packets.

Number of packets with the one-way jitter exceeding the threshold.

average

N/A

N/A

N/A

OWD-DS/OWD-SD

N/A

Packets sent after the operation starts.

Number of sent packets.

Number of packets with the one-way delay exceeding the threshold.

packet-loss

accumulate

Packets sent after the operation starts.

Number of sent packets.

Total packet loss.

ICPIF/MOS (available only for the voice operation)

N/A

N/A

N/A

N/A

 

display nqa result

Use display nqa result to display the most recent result of an NQA operation.

Syntax

display nqa result [ admin-name operation-tag ]

Views

Any view

Predefined user roles

network-admin

network-operator

mdc-admin

mdc-operator

Parameters

admin-name operation-tag: Specifies an NQA operation by its administrator name and operation tag. The admin-name argument represents the name of the administrator who creates the NQA operation. The operation-tag argument represents the operation tag. Each of the arguments is a case-insensitive string of 1 to 32 characters that cannot contain hyphens (-). If you do not specify an NQA operation, the command displays the most recent results of all NQA operations.

Examples

# Display the most recent result of the TCP operation with administrator name admin and operation tag test.

<Sysname> display nqa result admin test

NQA entry (admin admin, tag test) test results:

    Send operation times: 1              Receive response times: 1

    Min/Max/Average round trip time: 35/35/35

    Square-Sum of round trip time: 1225

    Last succeeded probe time: 2011-05-29 10:50:33.2

  Extended results:

    Packet loss ratio: 0%

    Failures due to timeout: 0

    Failures due to disconnect: 0

    Failures due to no connection: 0

    Failures due to internal error: 0

    Failures due to other errors: 0

# Display the most recent result of the ICMP jitter operation with administrator name admin and operation tag test.

<Sysname> display nqa result admin test

NQA entry (admin admin, tag test) test results:

    Send operation times: 10             Receive response times: 10

    Min/Max/Average round trip time: 1/2/1

    Square-Sum of round trip time: 13

    Last packet received time: 2015-03-09 17:40:29.8

  Extended results:

    Packet loss ratio: 0%

    Failures due to timeout: 0

    Failures due to internal error: 0

    Failures due to other errors: 0

    Packets out of sequence: 0

    Packets arrived late: 0

  ICMP-jitter results:

   RTT number: 10

    Min positive SD: 0                     Min positive DS: 0

    Max positive SD: 0                     Max positive DS: 0

    Positive SD number: 0                  Positive DS number: 0

    Positive SD sum: 0                     Positive DS sum: 0

    Positive SD average: 0                 Positive DS average: 0

    Positive SD square-sum: 0              Positive DS square-sum: 0

    Min negative SD: 1                     Min negative DS: 2

    Max negative SD: 1                     Max negative DS: 2

    Negative SD number: 1                  Negative DS number: 1

    Negative SD sum: 1                     Negative DS sum: 2

    Negative SD average: 1                 Negative DS average: 2

    Negative SD square-sum: 1              Negative DS square-sum: 4

  One way results:

    Max SD delay: 1                        Max DS delay: 2

    Min SD delay: 1                        Min DS delay: 2

    Number of SD delay: 1                  Number of DS delay: 1

    Sum of SD delay: 1                     Sum of DS delay: 2

    Square-Sum of SD delay: 1              Square-Sum of DS delay: 4

    Lost packets for unknown reason: 0

# Display the most recent result of the UDP jitter operation with administrator name admin and operation tag test.

<Sysname> display nqa result admin test

NQA entry (admin admin, tag test) test results:

    Send operation times: 10             Receive response times: 10

    Min/Max/Average round trip time: 15/46/26

    Square-Sum of round trip time: 8103

    Last packet received time: 2011-05-29 10:56:38.7

  Extended results:

    Packet loss ratio: 0%

    Failures due to timeout: 0

    Failures due to internal error: 0

    Failures due to other errors: 0

    Packets out of sequence: 0

    Packets arrived late: 0

  UDP-jitter results:

   RTT number: 10

    Min positive SD: 8                     Min positive DS: 8

    Max positive SD: 18                    Max positive DS: 8

    Positive SD number: 5                  Positive DS number: 2

    Positive SD sum: 75                    Positive DS sum: 32

    Positive SD average: 15                Positive DS average: 16

    Positive SD square-sum: 1189           Positive DS square-sum: 640

    Min negative SD: 8                     Min negative DS: 1

    Max negative SD: 24                    Max negative DS: 30

    Negative SD number: 4                  Negative DS number: 7

    Negative SD sum: 56                    Negative DS sum: 99

    Negative SD average: 14                Negative DS average: 14

    Negative SD square-sum: 946            Negative DS square-sum: 1495

  One way results:

    Max SD delay: 22                       Max DS delay: 23

    Min SD delay: 7                        Min DS delay: 7

    Number of SD delay: 10                 Number of DS delay: 10

    Sum of SD delay: 125                   Sum of DS delay: 132

    Square-Sum of SD delay: 1805           Square-Sum of DS delay: 1988

    SD lost packets: 0                     DS lost packets: 0

    Lost packets for unknown reason: 0

# Display the most recent result of the voice operation with administrator name admin and operation tag test.

<Sysname> display nqa result admin test

NQA entry (admin admin, tag test) test results:

    Send operation times: 1000           Receive response times: 0

    Min/Max/Average round trip time: 0/0/0

    Square-Sum of round trip time: 0

    Last packet received time: 0-00-00 00:00:00.0

  Extended results:

    Packet loss ratio: 100%

    Failures due to timeout: 1000

    Failures due to internal error: 0

    Failures due to other errors: 0

    Packets out of sequence: 0

    Packets arrived late: 0

  Voice results:

   RTT number: 0

    Min positive SD: 0                     Min positive DS: 0

    Max positive SD: 0                     Max positive DS: 0

    Positive SD number: 0                  Positive DS number: 0

    Positive SD sum: 0                     Positive DS sum: 0

    Positive SD average: 0                 Positive DS average: 0

    Positive SD square-sum: 0              Positive DS square-sum: 0

    Min negative SD: 0                     Min negative DS: 0

    Max negative SD: 0                     Max negative DS: 0

    Negative SD number: 0                  Negative DS number: 0

    Negative SD sum: 0                     Negative DS sum: 0

    Negative SD average: 0                 Negative DS average: 0

    Negative SD square-sum: 0              Negative DS square-sum: 0

  One way results:

    Max SD delay: 0                        Max DS delay: 0

    Min SD delay: 0                        Min DS delay: 0

    Number of SD delay: 0                  Number of DS delay: 0

    Sum of SD delay: 0                     Sum of DS delay: 0

    Square-Sum of SD delay: 0              Square-Sum of DS delay: 0

    SD lost packets: 0                     DS lost packets: 0

    Lost packets for unknown reason: 1000

  Voice scores:

    MOS value: 0.99                        ICPIF value: 87

# Display the most recent result of the path jitter operation with administrator name admin and operation tag test.

<Sysname> display nqa result admin test

NQA entry (admin admin, tag test) test results:

  Hop IP 192.168.40.210

    Basic Results:

      Send operation times: 10

      Receive response times: 10

      Min/Max/Average round trip time: 1/1/1

      Square-Sum of round trip time: 10

    Extended Results:

      Packet loss ratio: 0%

      Failures due to timeout: 0

      Failures due to internal error: 0

      Failures due to other errors: 0

      Packets out of sequence: 0

      Packets arrived late: 0

    Path-Jitter Results:

      Jitter number: 9

        Min/Max/Average jitter: 0/0/0

      Positive jitter number: 0

        Min/Max/Average positive jitter: 0/0/0

        Sum/Square-Sum positive jitter: 0/0

      Negative jitter number: 0

        Min/Max/Average negative jitter: 0/0/0

        Sum/Square-Sum negative jitter: 0/0

  Hop IP 192.168.50.209

    Basic Results:

      Send operation times: 10

      Receive response times: 10

      Min/Max/Average round trip time: 1/1/1

      Square-Sum of round trip time: 10

    Extended Results:

      Packet loss ratio: 0%

      Failures due to timeout: 0

      Failures due to internal error: 0

      Failures due to other errors: 0

      Packets out of sequence: 0

      Packets arrived late: 0

    Path-Jitter Results:

      Jitter number: 9

        Min/Max/Average jitter: 0/0/0

      Positive jitter number: 0

        Min/Max/Average positive jitter: 0/0/0

        Sum/Square-Sum positive jitter: 0/0

      Negative jitter number: 0

        Min/Max/Average negative jitter: 0/0/0

        Sum/Square-Sum negative jitter: 0/0

# Display the most recent result of the UDP tracert operation with administrator name admin and operation tag test.

<Sysname> display nqa result admin test

NQA entry (admin admin, tag test) test results:

    Send operation times: 6              Receive response times: 6

    Min/Max/Average round trip time: 35/35/35

    Square-Sum of round trip time: 1225

    Last succeeded probe time: 2013-09-09 14:23:24.5

  Extended results:

    Packet loss ratio: 0%

    Failures due to timeout: 0

    Failures due to internal error: 0

    Failures due to other errors: 0

  UDP-tracert results:

    TTL    Hop IP             Time

    1      3.1.1.1            2013-09-09 14:23:24.5

    2      4.1.1.1            2013-09-09 14:23:24.5

Table 6 Command output

Field

Description

Data collecting in progress

The operation is in progress.

Send operation times

Number of operations.

Receive response times

Number of response packets received.

Min/Max/Average round trip time

Minimum/maximum/average round-trip time in milliseconds.

Square-Sum of round trip time

Square sum of round-trip time.

Last succeeded probe time

Time when the last successful probe was completed. If no probes are successful in an operation, the field displays 0.

This field is not available for UDP jitter, path jitter, and voice operations.

Last packet received time

Time when the last response packet was received. If no response packets in a probe were received, the field displays 0.

This field is available only for UDP jitter and voice operations.

Packet loss ratio

Average packet loss ratio.

Failures due to timeout

Number of timeout occurrences in an operation.

Failures due to disconnect

Number of disconnections by the peer.

Failures due to no connection

Number of failures to connect with the peer.

Failures due to internal error

Number of failures due to internal errors.

Failures due to other errors

Failures due to other errors.

Packets out of sequence

Number of failures due to out-of-sequence packets.

ICMP-jitter results

ICMP jitter operation results.

This field is available only for the ICMP jitter operation.

Packets arrived late

Number of response packets received after a probe times out.

UDP-jitter results

UDP jitter operation results.

This field is available only for the UDP jitter operation.

Voice results

Voice operation results.

This field is available only for the voice operation.

RTT number

Number of response packets received.

Min positive SD

Minimum positive jitter from source to destination.

Min positive DS

Minimum positive jitter from destination to source.

Max positive SD

Maximum positive jitter from source to destination.

Max positive DS

Maximum positive jitter from destination to source.

Positive SD number

Number of positive jitters from source to destination.

Positive DS number

Number of positive jitters from destination to source.

Positive SD sum

Sum of positive jitters from source to destination.

Positive DS sum

Sum of positive jitters from destination to source.

Positive SD average

Average positive jitters from source to destination.

Positive DS average

Average positive jitters from destination to source.

Positive SD square-sum

Square sum of positive jitters from source to destination.

Positive DS square-sum

Square sum of positive jitters from destination to source.

Min negative SD

Minimum absolute value among negative jitters from source to destination.

Min negative DS

Minimum absolute value among negative jitters from destination to source.

Max negative SD

Maximum absolute value among negative jitters from source to destination.

Max negative DS

Maximum absolute value among negative jitters from destination to source.

Negative SD number

Number of negative jitters from source to destination.

Negative DS number

Number of negative jitters from destination to source.

Negative SD sum

Sum of absolute values of negative jitters from source to destination.

Negative DS sum

Sum of absolute values of negative jitters from destination to source.

Negative SD average

Average absolute value of negative jitters from source to destination.

Negative DS average

Average absolute value of negative jitters from destination to source.

Negative SD square-sum

Square sum of negative jitters from source to destination.

Negative DS square-sum

Square sum of negative jitters from destination to source.

One way results

Unidirectional delay.

This field is available only for the ICMP jitter, UDP jitter, and voice operations.

Max SD delay

Maximum delay from source to destination.

Max DS delay

Maximum delay from destination to source.

Min SD delay

Minimum delay from source to destination.

Min DS delay

Minimum delay from destination to source.

Number of SD delay

Number of delays from source to destination.

Number of DS delay

Number of delays from destination to source.

Sum of SD delay

Sum of delays from source to destination.

Sum of DS delay

Sum of delays from destination to source.

Square-Sum of SD delay

Square sum of delays from source to destination.

Square-Sum of DS delay

Square sum of delays from destination to source.

SD lost packets

Number of lost packets from the source to the destination.

DS lost packets

Number of lost packets from the destination to the source.

Lost packets for unknown reason

Number of lost packets for unknown reasons.

Voice scores

Voice parameters.

This field is available only for the voice operation.

MOS value

MOS value calculated for the voice operation.

ICPIF value

ICPIF value calculated for the voice operation.

Hop IP

IP address of the hop.

This field is available only for the path jitter operation.

Path-jitter results

Path jitter operation results.

This field is available only for the path jitter operation.

Jitter number

Number of jitters.

This field is available only for the path jitter operation.

Min/Max/Average jitter

Minimum/maximum/average jitter in milliseconds.

This field is available only for the path jitter operation.

Positive jitter number

Number of positive jitter.

This field is available only for the path jitter operation.

Min/Max/Average positive jitter

Minimum/maximum/average positive jitter in milliseconds.

This field is available only for the path jitter operation.

Sum/Square-Sum positive jitter

Sum/square sum of the positive jitter.

This field is available only for the path jitter operation.

Negative jitter number

Number of negative jitter.

This field is available only for the path jitter operation.

Min/Max/Average negative jitter

Minimum/maximum/average negative jitter in milliseconds.

This field is available only for the path jitter operation.

Sum/Square-Sum negative jitter

Sum/square sum of the negative jitter.

This field is available only for the path jitter operation.

TTL

If the routing table bypass feature is not enabled in the operation, this field displays the TTL value in the probe packet.

If the routing table bypass feature is enabled, this field displays the TTL value configured by using the init-ttl command. However, the actual TTL value in the probe packet is fixed at 1.

Hop IP

IP address of the node that sent the reply packet.

Time

Time when the NQA client received the reply packet.

 

display nqa statistics

Use display nqa statistics to display NQA operation statistics.

Syntax

display nqa statistics [ admin-name operation-tag ]

Views

Any view

Predefined user roles

network-admin

network-operator

mdc-admin

mdc-operator

Parameters

admin-name operation-tag: Specifies an NQA operation by its administrator name and operation tag. The admin-name argument represents the name of the administrator who creates the NQA operation. The operation-tag argument represents the operation tag. Each of the arguments is a case-insensitive string of 1 to 32 characters that cannot contain hyphens (-). If you do not specify an NQA operation, the command displays statistics for all NQA operations.

Usage guidelines

The statistics are generated after the NQA operation completes. If you execute the display nqa statistics command before the operation completes, the statistics are displayed as all 0s.

If a reaction entry is configured, the command displays the monitoring results of the reaction entry in the period specified by the statistics internal command. The result fields display hyphens (-) in one of the following conditions:

·     The threshold type is average value.

·     The monitored performance metric is ICPIF or MOS for the voice operation.

‌This command is not available for the UDP tracert operation.

Examples

# Display the statistics for the TCP operation with administrator name admin and operation tag test.

<Sysname> display nqa statistics admin test

NQA entry (admin admin, tag test) test statistics:

  NO. : 1

    Start time: 2007-01-01 09:30:20.0

    Life time: 2 seconds

    Send operation times: 1              Receive response times: 1

    Min/Max/Average round trip time: 13/13/13

    Square-Sum of round trip time: 169

  Extended results:

    Packet loss ratio: 0%

    Failures due to timeout: 0

    Failures due to disconnect: 0

    Failures due to no connection: 0

    Failures due to internal error: 0

    Failures due to other errors: 0

# Display the statistics for the ICMP jitter operation with administrator name admin and operation tag test.

<Sysname> display nqa statistics admin test

NQA entry (admin admin, tag test) test statistics:

  NO. : 1

    Start time: 2015-03-09 17:42:10.7

    Life time: 156 seconds

    Send operation times: 1560           Receive response times: 1560

    Min/Max/Average round trip time: 1/2/1

    Square-Sum of round trip time: 1563

  Extended results:

    Packet loss ratio: 0%

    Failures due to timeout: 0

    Failures due to internal error: 0

    Failures due to other errors: 0

    Packets out of sequence: 0

    Packets arrived late: 0

  ICMP-jitter results:

   RTT number: 1560

    Min positive SD: 1                     Min positive DS: 1

    Max positive SD: 1                     Max positive DS: 2

    Positive SD number: 18                 Positive DS number: 46

    Positive SD sum: 18                    Positive DS sum: 49

    Positive SD average: 1                 Positive DS average: 1

    Positive SD square-sum: 18             Positive DS square-sum: 55

    Min negative SD: 1                     Min negative DS: 1

    Max negative SD: 1                     Max negative DS: 2

    Negative SD number: 24                 Negative DS number: 57

    Negative SD sum: 24                    Negative DS sum: 58

    Negative SD average: 1                 Negative DS average: 1

    Negative SD square-sum: 24             Negative DS square-sum: 60

  One way results:

    Max SD delay: 1                        Max DS delay: 2

    Min SD delay: 1                        Min DS delay: 1

    Number of SD delay: 4                  Number of DS delay: 4

    Sum of SD delay: 4                     Sum of DS delay: 5

    Square-Sum of SD delay: 4              Square-Sum of DS delay: 7

    Lost packets for unknown reason: 0

  Reaction statistics:

    Index  Checked Element  Threshold Type  Checked Num  Over-threshold Num

    1      jitter-DS        accumulate      1500         10

    2      jitter-SD        average         -            -

    3      OWD-DS           -               1560         2

    4      OWD-SD           -               1560         0

    5      packet-loss      accumulate      0            0

    6      RTT              accumulate      1560         0

# Display the statistics for the UDP jitter operation with administrator name admin and operation tag test.

<Sysname> display nqa statistics admin test

NQA entry (admin admin, tag test) test statistics:

  NO. : 1

    Start time: 2007-01-01 09:33:22.3

    Life time: 23 seconds

    Send operation times: 100            Receive response times: 100

    Min/Max/Average round trip time: 1/11/5

    Square-Sum of round trip time: 24360

  Extended results:

    Packet loss ratio: 0%

    Failures due to timeout: 0

    Failures due to internal error: 0

    Failures due to other errors: 0

    Packets out of sequence: 0

    Packets arrived late: 0

  UDP-jitter results:

   RTT number: 550

    Min positive SD: 1                     Min positive DS: 1

    Max positive SD: 7                     Max positive DS: 1

    Positive SD number: 220                Positive DS number: 97

    Positive SD sum: 283                   Positive DS sum: 287

    Positive SD average: 1                 Positive DS average: 2

    Positive SD square-sum: 709            Positive DS square-sum: 1937

    Min negative SD: 2                     Min negative DS: 1

    Max negative SD: 10                    Max negative DS: 1

    Negative SD number: 81                 Negative DS number: 94

    Negative SD sum: 556                   Negative DS sum: 191

    Negative SD average: 6                 Negative DS average: 2

    Negative SD square-sum: 4292           Negative DS square-sum: 967

  One way results:

    Max SD delay: 5                        Max DS delay: 5

    Min SD delay: 1                        Min DS delay: 1

    Number of SD delay: 550                Number of DS delay: 550

    Sum of SD delay: 1475                  Sum of DS delay: 1201

    Square-Sum of SD delay: 5407           Square-Sum of DS delay: 3959

    SD lost packets: 0                     DS lost packets: 0

    Lost packets for unknown reason: 0

  Reaction statistics:

    Index  Checked Element  Threshold Type  Checked Num  Over-threshold Num

    1      jitter-DS        accumulate      90           25

    2      jitter-SD        average         -            -

    3      OWD-DS           -               100          24

    4      OWD-SD           -               100          13

    5      packet-loss      accumulate      0            0

    6      RTT              accumulate      100          52

# Display the statistics for the voice operation with administrator name admin and operation tag test.

<Sysname> display nqa statistics admin test

NQA entry (admin admin, tag test) test statistics:

  NO. : 1

    Start time: 2007-01-01 09:33:45.3

    Life time: 120 seconds

    Send operation times: 10             Receive response times: 10

    Min/Max/Average round trip time: 1/12/7

    Square-Sum of round trip time: 620

  Extended results:

    Packet loss ratio: 0%

    Failures due to timeout: 0

    Failures due to internal error: 0

    Failures due to other errors: 0

    Packets out of sequence: 0

    Packets arrived late: 0

  Voice results:

   RTT number: 10

    Min positive SD: 3                     Min positive DS: 1

    Max positive SD: 10                    Max positive DS: 1

    Positive SD number: 3                  Positive DS number: 2

    Positive SD sum: 18                    Positive DS sum: 2

    Positive SD average: 6                 Positive DS average: 1

    Positive SD square-sum: 134            Positive DS square-sum: 2

    Min negative SD: 3                     Min negative DS: 1

    Max negative SD: 9                     Max negative DS: 1

    Negative SD number: 4                  Negative DS number: 2

    Negative SD sum: 25                    Negative DS sum: 2

    Negative SD average: 6                 Negative DS average: 1

    Negative SD square-sum: 187            Negative DS square-sum: 2

  One way results:

    Max SD delay: 0                        Max DS delay: 0

    Min SD delay: 0                        Min DS delay: 0

    Number of SD delay: 0                  Number of DS delay: 0

    Sum of SD delay: 0                     Sum of DS delay: 0

    Square-Sum of SD delay: 0              Square-Sum of DS delay: 0

    SD lost packets: 0                     DS lost packets: 0

    Lost packets for unknown reason: 0

  Voice scores:

    Max MOS value: 4.40                    Min MOS value: 4.40

    Max ICPIF value: 0                     Min ICPIF value: 0

  Reaction statistics:

    Index  Checked Element  Threshold Type  Checked Num  Over-threshold Num

    1      ICPIF            -               -            -

    2      MOS              -               -            -

# Display the statistics for the path jitter operation with administrator name admin and operation tag test.

<Sysname> display nqa statistics admin test

NQA entry (admin admin, tag test) test statistics:

  NO. : 1

  Path 1:

  Hop IP 192.168.40.210

    Basic Results:

      Send operation times: 10

      Receive response times: 10

      Min/Max/Average round trip time: 1/1/1

      Square-Sum of round trip time: 10

    Extended Results:

      Packet loss ratio: 0%

      Failures due to timeout: 0

      Failures due to internal error: 0

      Failures due to other errors: 0

      Packets out of sequence: 0

      Packets arrived late: 0

    Path-Jitter Results:

      Jitter number: 9

        Min/Max/Average jitter: 0/0/0

      Positive jitter number: 0

        Min/Max/Average positive jitter: 0/0/0

        Sum/Square-Sum positive jitter: 0/0

      Negative jitter number: 0

        Min/Max/Average negative jitter: 0/0/0

        Sum/Square-Sum negative jitter: 0/0

  Hop IP 192.168.50.209

    Basic Results:

      Send operation times: 10

      Receive response times: 10

      Min/Max/Average round trip time: 1/1/1

      Square-Sum of round trip time: 10

    Extended Results:

      Packet loss ratio: 0%

      Failures due to timeout: 0

      Failures due to internal error: 0

      Failures due to other errors: 0

      Packets out of sequence: 0

      Packets arrived late: 0

    Path-Jitter Results:

      Jitter number: 9

        Min/Max/Average jitter: 0/0/0

      Positive jitter number: 0

        Min/Max/Average positive jitter: 0/0/0

        Sum/Square-Sum positive jitter: 0/0

      Negative jitter number: 0

        Min/Max/Average negative jitter: 0/0/0

        Sum/Square-Sum negative jitter: 0/0

Table 7 Command output

Field

Description

No.

Statistics group ID.

Start time

Time when the operation started.

Life time

Duration of the operation in seconds.

Send operation times

Number of probe packets sent.

Receive response times

Number of response packets received.

Min/Max/Average round trip time

Minimum/maximum/average round-trip time in milliseconds.

Square-Sum of round trip time

Square sum of round-trip time.

Packet loss ratio

Average packet loss ratio.

Failures due to timeout

Number of timeout occurrences in an operation.

Failures due to disconnect

Number of disconnections by the peer.

Failures due to no connection

Number of failures to connect with the peer.

Failures due to internal error

Number of failures due to internal errors.

Failures due to other errors

Failures due to other errors.

Packets out of sequence

Number of failures due to out-of-sequence packets.

Packets arrived late

Number of response packets received after a probe times out.

ICMP-jitter results

ICMP jitter operation results.

This field is available only for the ICMP jitter operation.

UDP-jitter results

UDP jitter operation results.

This field is available only for the UDP jitter operation.

Voice results

Voice operation results.

This field is available only for the voice operation.

RTT number

Number of response packets received.

Min positive SD

Minimum positive jitter from source to destination.

Min positive DS

Minimum positive jitter from destination to source.

Max positive SD

Maximum positive jitter from source to destination.

Max positive DS

Maximum positive jitter from destination to source.

Positive SD number

Number of positive jitters from source to destination.

Positive DS number

Number of positive jitters from destination to source.

Positive SD sum

Sum of positive jitters from source to destination.

Positive DS sum

Sum of positive jitters from destination to source.

Positive SD average

Average positive jitters from source to destination.

Positive DS average

Average positive jitters from destination to source.

Positive SD square-sum

Square sum of positive jitters from source to destination.

Positive DS square-sum

Square sum of positive jitters from destination to source.

Min negative SD

Minimum absolute value among negative jitters from source to destination.

Min negative DS

Minimum absolute value among negative jitters from destination to source.

Max negative SD

Maximum absolute value among negative jitters from source to destination.

Max negative DS

Maximum absolute value among negative jitters from destination to source.

Negative SD number

Number of negative jitters from source to destination.

Negative DS number

Number of negative jitters from destination to source.

Negative SD sum

Sum of absolute values of negative jitters from source to destination.

Negative DS sum

Sum of absolute values of negative jitters from destination to source.

Negative SD average

Average absolute value of negative jitters from source to destination.

Negative DS average

Average absolute value of negative jitters from destination to source.

Negative SD square-sum

Square sum of negative jitters from source to destination.

Negative DS square-sum

Square sum of negative jitters from destination to source.

One way results

Unidirectional delay result.

This field is available only for the ICMP jitter, UDP jitter, and voice operations.

Max SD delay

Maximum delay from source to destination.

Max DS delay

Maximum delay from destination to source.

Min SD delay

Minimum delay from source to destination.

Min DS delay

Minimum delay from destination to source.

Number of SD delay

Number of delays from source to destination.

Number of DS delay

Number of delays from destination to source.

Sum of SD delay

Sum of delays from source to destination.

Sum of DS delay

Sum of delays from destination to source.

Square-Sum of SD delay

Square sum of delays from source to destination.

Square-Sum of DS delay

Square sum of delays from destination to source.

SD lost packets

Number of lost packets from the source to the destination.

DS lost packets

Number of lost packets from the destination to the source.

Lost packets for unknown reason

Number of lost packets for unknown reasons.

Voice scores

Voice parameters.

This field is available only for the voice operation.

Max MOS value

Maximum MOS value.

Min MOS value

Minimum MOS value.

Max ICPIF value

Maximum ICPIF value.

Min ICPIF value

Minimum ICPIF value.

Reaction statistics

Statistics about the reaction entry in the counting interval.

Index

ID of a reaction entry.

Checked Element

Monitored element.

Threshold Type

Threshold type.

Checked Num

Number of targets that have been monitored for data collection.

Over-threshold Num

Number of threshold violations.

Path

Serial number for the path in the path jitter operation.

This field is available only for the path jitter operation.

Hop IP

IP address of the hop.

This field is available only for the path jitter operation.

Path-jitter results

Path jitter operation results.

This field is available only for the path jitter operation.

Jitter number

Number of jitters.

This field is available only for the path jitter operation.

Min/Max/Average jitter

Minimum/maximum/average positive jitter in milliseconds.

This field is available only for the path jitter operation.

Positive jitter number

Number of positive jitters.

This field is available only for the path jitter operation.

Min/Max/Average positive jitter

Minimum/maximum/average positive jitter in milliseconds.

This field is available only for the path jitter operation.

Sum/Square-Sum positive jitter

Sum/square sum of positive jitters.

This field is available only for the path jitter operation.

Negative jitter number

Number of negative jitters.

This field is available only for the path jitter operation.

Min/Max/Average negative jitter

Minimum/maximum/average negative jitter in milliseconds.

This field is available only for the path jitter operation.

Sum/Square-Sum negative jitter

Sum/square sum of negative jitters.

This field is available only for the path jitter operation.

 

Table 8 Monitored performance metrics for DHCP/DLSw/DNS/FTP/HTTP/ICMP echo/SNMP/TCP/UDP echo operations

Monitored performance metric

Threshold type

Collect data in

Checked Num

Over-threshold Num

probe-duration

accumulate

Probes in the counting interval.

Number of completed probes.

Number of probes of which the duration exceeds the threshold.

average

N/A

N/A

N/A

consecutive

Probes in the counting interval.

Number of completed probes.

Number of probes of which the duration exceeds the threshold.

probe-fail

accumulate

Probes in the counting interval.

Number of completed probes.

Number of probe failures.

consecutive

Probes in the counting interval.

Number of completed probes.

Number of probe failures.

 

Table 9 Monitored performance metrics for ICMP jitter/UDP jitter/voice operations

Monitored performance metric

Threshold type

Collect data in

Checked Num

Over-threshold Num

RTT

accumulate

Packets sent in the counting interval.

Number of sent packets.

Number of packets of which the round-trip time exceeds the threshold.

average

N/A

N/A

N/A

jitter-DS/jitter-SD

accumulate

Packets sent in the counting interval.

Number of sent packets.

Number of packets of which the one-way jitter exceeds the threshold.

average

N/A

N/A

N/A

OWD-DS/OWD-SD

N/A

Packets sent in the counting interval.

Number of sent packets.

Number of packets of which the one-way delay exceeds the threshold.

packet-loss

accumulate

Packets sent in the counting interval.

Number of sent packets.

Number of packet loss.

ICPIF/MOS (available only for the voice operation)

N/A

N/A

N/A

N/A

 

Related commands

statistics interval

expect data

Use expect data to configure the expected data.

Use undo expect data to restore the default.

Syntax

expect data expression [ offset number ]

undo expect data

Default

No expected data is configured.

Views

HTTP/HTTPS/TCP/UDP template view

Predefined user roles

network-admin

mdc-admin

Parameters

expression: Specifies the expected data, a case-sensitive string of 1 to 200 characters.

offset number: Specifies the offset in bytes after which the first match operation starts. The value range for the number argument is 0 to 1000, and the default value is 0. If you do not specify an offset, the match operation starts from the beginning byte of the payload.

Usage guidelines

Upon receiving a response packet, the NQA client examines the target payload for the expected data.

·     If a match is found, the NQA client verifies the NQA destination device as legal.

·     If no match is found, the NQA client looks up the entire payload for a match. If no match is found again, the NQA destination device is verified as illegal. The NQA client does not perform the second round if no offset is specified. It verifies the NQA destination as illegal directly if no match is found for the first round.

Expected data check takes place in the following conditions:

·     For features that use the HTTP or HTTPS template, the NQA client checks for the expected data if the response contains the Content-Length header.

·     For features that use the TCP or UDP template, the NQA client checks for the expected data if the data-fill command is configured.

The first five bytes of the UDP packet payload identify the probe packet type. The start byte of the offset is the sixth byte of the UDP payload.

Examples

# In HTTP template view, set the expected data to welcome!.

<Sysname> system-view

[Sysname] nqa template http httptplt

[Sysname-nqatplt-http-httptplt] expect data welcome!

expect ip

Use expect ip to specify the expected IPv4 address.

Use undo expect ip to restore the default.

Syntax

expect ip ip-address

undo expect ip

Default

No expected IPv4 address is specified.

Views

DNS template view

Predefined user roles

network-admin

mdc-admin

Parameters

ip-address: Specifies the expected IPv4 address for a DNS echo request.

Usage guidelines

During a DNS operation, the NQA client compares the expected IPv4 address with the IPv4 address resolved by the DNS server. If they are the same, it considers the DNS server legal.

Examples

# In DNS template view, specify 1.1.1.1 as the expected IPv4 address.

<Sysname> system-view

[Sysname] nqa template dns dnstplt

[Sysname-nqatplt-dns-dnstplt] expect ip 1.1.1.1

expect ipv6

Use expect ipv6 to specify the expected IPv6 address.

Use undo expect ipv6 to restore the default.

Syntax

expect ipv6 ipv6-address

undo expect ipv6

Default

No expected IPv6 address is specified.

Views

DNS template view

Predefined user roles

network-admin

mdc-admin

Parameters

ip-address: Specifies the expected IPv6 address for a DNS echo request.

Usage guidelines

During a DNS operation, the NQA client compares the expected IPv6 address with the IPv6 address resolved by the DNS server. If they are the same, it considers the DNS server legal.

Examples

# In DNS template view, specify 1::1 as the expected IPv6 address.

<Sysname> system-view

[Sysname] nqa template dns dnstplt

[Sysname-nqatplt-dns-dnstplt] expect ipv6 1::1

expect status

Use expect status to configure the expected status code.

Use undo expect status to restore the default.

Syntax

expect status status-list

undo expect status [ status-list ]

Default

No expected status code is configured.

Views

HTTP template view

HTTPS template view

Predefined user roles

network-admin

mdc-admin

Parameters

status-list: Specifies a space-separated list of up to 10 status code items. Each item specifies a status code or a range of status codes in the form of status-num 1 to status-num 2. The value ranges for both the status-num 1 and status-num 2 arguments are 0 to 999. The value for the status-num 2 argument must be equal to or greater than the value for the status-num 1 argument.

Usage guidelines

The status code of the HTTP or HTTPS packet is a three-digit field in decimal notation, and the code includes the server status information. The first digit defines the class of response.

Examples

# In HTTP template view, set the expected status codes to 200, 300, and 400 to 500.

<Sysname> system-view

[Sysname] nqa template http httptplt

[Sysname-nqatplt-http-httptplt] expect status 200 300 400 to 500

filename

Use filename to specify a file to be transferred between the FTP server and the FTP client.

Use undo filename to restore the default.

Syntax

filename filename

undo filename

Default

No file is specified.

Views

FTP operation view

FTP template view

Predefined user roles

network-admin

mdc-admin

Parameters

filename: Specifies the name of a file, a case-sensitive string of 1 to 200 characters that cannot contain slashes (/).

Examples

# Specify config.txt as the file to be transferred between the FTP server and the FTP client for the FTP operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type ftp

[Sysname-nqa-admin-test-ftp] filename config.txt

# In FTP template view, specify config.txt as the file to be transferred between the FTP server and the FTP client.

<Sysname> system-view

[Sysname] nqa template ftp ftptplt

[Sysname-nqatplt-ftp-ftptplt] filename config.txt

frequency

Use frequency to specify the interval at which the NQA operation repeats.

Use undo frequency to restore the default.

Syntax

frequency interval

undo frequency

Default

In NQA operation view, the interval between two consecutive voice or path jitter operations is 60000 milliseconds. The interval between two consecutive operations of other types is 0 milliseconds.

In NQA template view, the interval between two consecutive operations is 5000 milliseconds.

Views

ICMP echo/TCP/UDP echo operation view

DHCP/DLSw/DNS/FTP/HTTP/SNMP operation view

UDP tracert operation view

ICMP jitter/path jitter/UDP jitter/voice operation view

Any NQA template view

Predefined user roles

network-admin

mdc-admin

Parameters

interval: Specifies the interval between two consecutive operations, in the range of 0 to 604800000 milliseconds. An interval of 0 milliseconds configures NQA to perform the operation only once, and not to generate any statistics.

Usage guidelines

If an operation is not completed when the interval is reached, the next operation does not start.

Examples

# Configure the ICMP echo operation to repeat every 1000 milliseconds.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] frequency 1000

# In DNS template view, configure the DNS operation to repeat every 1000 milliseconds.

<Sysname> system-view

[Sysname] nqa template dns dnstplt

[Sysname-nqatplt-dns-dnstplt] frequency 1000

history-record enable

Use history-record enable to enable the saving of history records for the NQA operation.

Use undo history-record enable to disable the saving of history records.

Syntax

history-record enable

undo history-record enable

Default

The saving of history records is enabled only for the UDP tracert operation.

Views

ICMP echo/TCP/UDP echo operation view

DHCP/DLSw/DNS/FTP/HTTP/SNMP operation view

UDP tracert operation view

Predefined user roles

network-admin

mdc-admin

Usage guidelines

To display the history records of the NQA operation, use the display nqa history command.

The undo form of the command also removes existing history records of an NQA operation.

Examples

# Enable the saving of history records for the NQA operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] history-record enable

Related commands

display nqa history

history-record keep-time

Use history-record keep-time to set the lifetime of history records for an NQA operation.

Use undo history-record keep-time to restore the default.

Syntax

history-record keep-time keep-time

undo history-record keep-time

Default

The history records of an NQA operation are kept for 120 minutes.

Views

ICMP echo/TCP/UDP echo operation view

DHCP/DLSw/DNS/FTP/HTTP/SNMP operation view

UDP tracert operation view

Predefined user roles

network-admin

mdc-admin

Parameters

keep-time: Specifies how long the history records can be saved. The value range is 1 to 1440 minutes.

Usage guidelines

When an NQA operation completes, the timer starts. All records are removed when the lifetime is reached.

Examples

# Set the lifetime of the history records to 100 minutes for the ICMP echo operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] history-record keep-time 100

history-record number

Use history-record number to set the maximum number of history records that can be saved for an NQA operation.

Use undo history-record number to restore the default.

Syntax

history-record number number

undo history-record number

Default

A maximum of 50 history records can be saved for an NQA operation.

Views

ICMP echo/TCP/UDP echo operation view

DHCP/DLSw/DNS/FTP/HTTP/SNMP operation view

UDP tracert operation view

Predefined user roles

network-admin

mdc-admin

Parameters

number: Specifies the maximum number of history records that can be saved for an NQA operation. The value range is 0 to 50.

Usage guidelines

If the number of history records for an NQA operation exceeds the maximum number, earliest history records are removed.

Examples

# Set the maximum number of history records to 10 for the ICMP echo operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] history-record number 10

init-ttl

Use init-ttl to set the TTL value for UDP packets in the start round of the UDP tracert operation.

Use undo init-ttl to restore the default.

Syntax

init-ttl value

undo init-ttl

Default

The NQA client sends a UDP packet with the TTL value 1 to start the UDP tracert operation.

Views

UDP tracert operation view

Predefined user roles

network-admin

mdc-admin

Parameters

value: Specifies the TTL value in the range of 1 to 255.

Examples

# Set the TTL value to 5 for the UDP packets in the start round.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type udp-tracert

[Sysname-nqa-admin-test-udp-tracert] init-ttl 5

key

Use key to set the shared key for secure RADIUS authentication.

Use undo key to restore the default.

Syntax

key { cipher | simple } string

undo key

Default

No shared key is configured for secure RADIUS authentication.

Views

RADIUS template view

Predefined user roles

network-admin

mdc-admin

Parameters

cipher: Specifies a key in encrypted form.

simple: Specifies a key in plaintext form. For security purposes, the key specified in plaintext form will be stored in encrypted form.

string: Specifies the shared key string. Its plaintext form is a case-sensitive string of 1 to 64 characters. Its encrypted form is a case-sensitive string of 1 to 117 characters.

Usage guidelines

Make sure the NQA client and the RADIUS server have the same shared key.

Examples

# In RADIUS template view, set the shared key to abc in plain text for secure RADIUS authentication.

<Sysname> system-view

[Sysname] nqa template radius radiustplt

[Sysname-nqatplt-radius-radiustplt] key simple abc

lsr-path

Use lsr-path to specify a loose source routing (LSR) path.

Use undo lsr-path to restore the default.

Syntax

lsr-path ip-address&<1-8>

undo lsr-path

Default

No LSR path is configured.

Views

Path jitter operation view

Predefined user roles

network-admin

mdc-admin

Parameters

ip-address&<1-8>: Specifies a space-separated list of up to eight IP addresses. Each IP address represents a hop on the path.

Usage guidelines

The path jitter operation first uses tracert to detect each hop to the destination. It then sends ICMP echo requests to measure the delay and jitters from the source to each node. If multiple routes exist between the source and destination, the operation uses the path specified by using lsr-path command.

Examples

# Specify 10.1.1.20 and 10.1.2.10 as the hops on the LSR path for the path jitter operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type path-jitter

[Sysname-nqa-admin-test- path-jitter] lsr-path 10.1.1.20 10.1.2.10

max-failure

Use max-failure to set the maximum number of consecutive probe failures in a UDP tracert operation.

Use undo max-failure to restore the default.

Syntax

max-failure times

undo max-failure

Default

A UDP tracert operation stops and fails when it detects five consecutive probe failures.

Views

UDP tracert operation view

Predefined user roles

network-admin

mdc-admin

Parameters

times: Specifies the maximum number in the range of 0 to 255. When this argument is set to 0 or 255, the UDP tracert operation does not stop when consecutive probe failures occur.

Usage guidelines

When a UDP tracert operation detects the maximum number of consecutive probe failures, the operation fails and stops probing the path.

Examples

# Set the maximum number of consecutive probe failures to 20 in a UDP tracert operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type udp-tracert

[Sysname-nqa-admin-test-udp-tracert] max-failure 20

mode

Use mode to set the data transmission mode for the FTP operation.

Use undo mode to restore the default.

Syntax

mode { active | passive }

undo mode

Default

The FTP operation uses the data transmission mode active.

Views

FTP operation view

FTP template view

Predefined user roles

network-admin

mdc-admin

Parameters

active: Sets the data transmission mode to active. The FTP server initiates a connection request.

passive: Sets the data transmission mode to passive. The FTP client initiates a connection request.

Examples

# Set the data transmission mode to passive for the FTP operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type ftp

[Sysname-nqa-admin-test-ftp] mode passive

# In FTP template view, set the data transmission mode to passive for the FTP operation.

<Sysname> system-view

[Sysname] nqa template ftp ftptplt

[Sysname-nqatplt-ftp-ftptplt] mode passive

next-hop ip

Use next-hop ip to specify the next hop IPv4 address for probe packets.

Use undo next-hop ip to restore the default.

Syntax

next-hop ip ip-address

undo next-hop ip

Default

No next hop IPv4 address is specified for probe packets.

Views

ICMP echo operation view

ICMP/TCP half open template view

Predefined user roles

network-admin

mdc-admin

Parameters

ip-address: Specifies the IPv4 address of the next hop.

Usage guidelines

If the next hop IPv4 address is not configured, the device searches the routing table to determine the next hop IPv4 address for the probe packets.

Examples

# Specify 10.1.1.1 as the next hop IPv4 address for the ICMP echo operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] next-hop ip 10.1.1.1

next-hop ipv6

Use next-hop ipv6 to specify the next hop IPv6 address for probe packets.

Use undo next-hop ipv6 to restore the default.

Syntax

next-hop ipv6 ipv6-address

undo next-hop ipv6

Default

No next hop IPv6 address is specified for probe packets.

Views

ICMP echo operation view

ICMP/TCP half open template view

Predefined user roles

network-admin

mdc-admin

Parameters

ipv6-address: Specifies the IPv6 address of the next hop. IPv6 link-local addresses are not supported.

Usage guidelines

If the next hop IPv6 address is not configured, the device searches the routing table to determine the next hop IPv6 address for the probe packets.

Examples

# Specify 10::1 as the next hop IPv6 address for the ICMP echo operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] next-hop ipv6 10::1

no-fragment enable

Use no-fragment enable to enable the no-fragmentation feature.

Use undo no-fragment enable to disable the no-fragmentation feature.

Syntax

no-fragment enable

undo no-fragment enable

Default

The no-fragmentation feature is disabled.

Views

UDP tracert operation view

Predefined user roles

network-admin

mdc-admin

Usage guidelines

The no-fragmentation feature sets the DF field to 1. Packets with the DF field set cannot be fragmented during the forwarding process.

You can use this command to test the path MTU of a link.

Examples

# Enable the no-fragmentation feature for the UDP tracert operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type udp-tracert

[Sysname-nqa-admin-test-udp-tracert] no-fragment enable

nqa

Use nqa to create an NQA operation and enter its view, or enter the view of an existing NQA operation.

Use undo nqa to remove the operation.

Syntax

nqa entry admin-name operation-tag

undo nqa { all | entry admin-name operation-tag }

Default

No NQA operations exist.

Views

System view

Predefined user roles

network-admin

mdc-admin

Parameters

admin-name operation-tag: Specifies an NQA operation by its administrator name and operation tag. The admin-name argument represents the name of the administrator who creates the NQA operation. The operation-tag argument represents the operation tag. Each of the arguments is a case-insensitive string of 1 to 32 characters that cannot contain hyphens (-).

all: Removes all NQA operations.

Examples

# Create an NQA operation with administrator name admin and operation tag test, and enter NQA operation view.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test]

nqa agent enable

Use nqa agent enable to enable the NQA client.

Use undo nqa agent enable to disable the NQA client and stop all operations being performed.

Syntax

nqa agent enable

undo nqa agent enable

Default

The NQA client is enabled.

Views

System view

Predefined user roles

network-admin

mdc-admin

Examples

# Enable the NQA client.

<Sysname> system-view

[Sysname] nqa agent enable

Related commands

nqa server enable

nqa schedule

Use nqa schedule to configure scheduling parameters for an NQA operation.

Use undo nqa schedule to stop the operation.

Syntax

nqa schedule admin-name operation-tag start-time { hh:mm:ss [ yyyy/mm/dd | mm/dd/yyyy ] | now } lifetime { lifetime | forever } [ recurring ]

undo nqa schedule admin-name operation-tag

Default

No schedule is configured for an NQA operation.

Views

System view

Predefined user roles

network-admin

mdc-admin

Parameters

admin-name operation-tag: Specifies an NQA operation by its administrator name and operation tag. The admin-name argument represents the name of the administrator who creates the NQA operation. The operation-tag argument represents the operation tag. Each of the arguments is a case-insensitive string of 1 to 32 characters that cannot contain hyphens (-).

start-time: Specifies the start time and date of the NQA operation.

hh:mm:ss: Specifies the start time of an NQA operation.

yyyy/mm/dd: Specifies the start date of an NQA operation. The default value is the current system time, and the value for the yyyy argument is in the range of 2000 to 2035.

mm/dd/yyyy: Specifies the start date of an NQA operation. The default value is the current system time, and the value for the yyyy argument is in the range of 2000 to 2035.

now: Starts the operation immediately.

lifetime: Specifies the duration of an operation.

lifetime: Specifies the duration of an operation in seconds. The value range is 1 to 2147483647.

forever: Performs the operation until you stop it by using the undo nqa schedule command.

recurring: Runs the operation automatically at the start time and for the specified duration. If you do not specify this keyword, the NQA operation is performed only once at the specified date and time.

Usage guidelines

The NQA operation works between the specified start time and the end time (the start time plus operation duration). If the specified start time is ahead of the system time, the operation starts immediately. If both the specified start time and end time are ahead of the system time, the operation does not start. To display the current system time, use the display clock command.

You cannot enter the view of a scheduled NQA operation. If you want to enter such view, use the undo nqa schedule command to stop the NQA operation first.

Specify a lifetime long enough for an operation to complete.

Examples

# Schedule the operation with administrator name admin and operation tag test to start on 08:08:08 2008/08/08 and last 1000 seconds.

<Sysname> system-view

[Sysname] nqa schedule admin test start-time 08:08:08 2008/08/08 lifetime 1000 recurring

Related commands

destination ip

display clock (Fundamentals Command Reference)

nqa entry

type

nqa template

Use nqa template to create an NQA template and enter its view, or enter the view of an existing NQA template.

Use undo nqa template to remove an NQA template.

Syntax

nqa template { dns | ftp | http | https | icmp | radius | ssl | tcp | tcphalfopen | udp } name

undo nqa template { dns | ftp | http | https | icmp | radius | ssl | tcp | tcphalfopen | udp } name

Default

No NQA templates exist.

Views

System view

Predefined user roles

network-admin

mdc-admin

Parameters

dns: Specifies the DNS template.

ftp: Specifies the FTP template.

http: Specifies the HTTP template.

https: Specifies the HTTPS template.

icmp: Specifies the ICMP template.

radius: Specifies the RADIUS template.

ssl: Specifies the SSL template.

tcp: Specifies the TCP template.

tcphalfopen: Specifies the TCP half open template.

udp: Specifies the UDP template.

name: Specifies the name of the NQA template, a case-insensitive string of 1 to 32 characters.

Examples

# Create an ICMP template named icmptplt, and enter its view.

<Sysname> system-view

[Sysname] nqa template icmp icmptplt

[Sysname-nqatplt-icmp-icmptplt]

operation (FTP operation view)

Use operation to specify the operation type for the FTP operation.

Use undo operation to restore the default.

Syntax

operation { get | put }

undo operation

Default

The FTP operation type is get.

Views

FTP operation view

FTP template view

Predefined user roles

network-admin

mdc-admin

Parameters

get: Gets a file from the FTP server.

put: Transfers a file to the FTP server.

Usage guidelines

When you perform the put operation with the filename command configured, make sure the file exists on the NQA client.

If you get a file from the FTP server, make sure the file specified in the URL exists on the FTP server. The NQA client does not save the file obtained from the FTP server.

Use a small file for the FTP operation. A big file might result in transfer failure because of timeout, or might affect other services for occupying much network bandwidth.

Examples

# Set the operation type to put for the FTP operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type ftp

[Sysname-nqa-admin-test-ftp] operation put

# In FTP template view, set the operation type to put for the FTP operation.

<Sysname> system-view

[Sysname] nqa template ftp ftptplt

[Sysname-nqatplt-ftp-ftptplt] operation put

Related commands

password

username

operation (HTTP/HTTPS operation view)

Use operation to specify the operation type for the HTTP or HTTPS operation.

Use undo operation to restore the default.

Syntax

operation { get | post | raw }

undo operation

Default

The HTTP or HTTPS operation type is get.

Views

HTTP operation view

HTTP/HTTPS template view

Predefined user roles

network-admin

mdc-admin

Parameters

get: Gets data from the HTTP or HTTPS server.

post: Transfers data to the HTTP or HTTPS server.

raw: Sends the RAW request to the HTTP or HTTPS server.

Usage guidelines

The HTTP and HTTPS operations use HTTP and HTTPS requests as probe packets.

For the get or post operation, the content in the request is obtained from the URL specified by the url command.

For the raw operation, the content in the request is configured in raw request view. You can use the raw-request command to enter the raw request view.

Examples

# Set the operation type to raw for the HTTP operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type http

[Sysname-nqa-admin-test-http] operation raw

# In HTTP template view, set the operation type to raw for the HTTP operation.

<Sysname> system-view

[Sysname] nqa template http httptplt

[Sysname-nqatplt-http-httptplt] operation raw

Related commands

password

raw-request

username

out interface

Use out interface to specify the output interface for probe packets.

Use undo out interface to restore the default.

Syntax

out interface interface-type interface-number

undo out interface

Default

The output interface for probe packets is not specified. The NQA client determines the output interface based on the routing table lookup.

Views

ICMP echo operation view

DHCP operation view

UDP tracert operation view

Predefined user roles

network-admin

mdc-admin

Parameters

interface-type interface-number: Specifies an interface by its type and number.

Usage guidelines

For successful operation, the specified output interface must be up.

If both the next-hop and out interface commands are configured for the ICMP echo operation, the out interface command does not take effect.

Examples

# Specify VLAN-interface 1 as the output interface for probe packets in the UDP tracert operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type udp-tracert

[Sysname-nqa-admin-test-udp-tracert] out interface vlan-interface 1

password

Use password to specify a password.

Use undo password to restore the default.

Syntax

password { cipher | simple } string

undo password

Default

No password is specified.

Views

FTP/HTTP operation view

FTP/HTTP/HTTPS/RADIUS template view

Predefined user roles

network-admin

mdc-admin

Parameters

cipher: Specifies a password in encrypted form.

simple: Specifies a password in plaintext form. For security purposes, the password specified in plaintext form will be stored in encrypted form.

string: Specifies the password. The value of the argument varies as follows:

·     For FTP, HTTP, and HTTPS operations, the plaintext form of the password is a case-sensitive string of 1 to 32 characters. The encrypted form of the password is a case-sensitive string of 1 to 73 characters.

·     For RADIUS templates, the plaintext form of the password is a case-sensitive string of 1 to 64 characters. The encrypted form of the password is a case-sensitive string of 1 to 117 characters.

Examples

# Set the FTP login password to ftpuser.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type ftp

[Sysname-nqa-admin-test-ftp] password simple ftpuser

# Set the FTP login password to ftpuser in FTP template view.

<Sysname> system-view

[Sysname] nqa template ftp ftptplt

[Sysname-nqatplt-ftp-ftptplt] password simple ftpuser

Related commands

operation

username

probe count

Use probe count to specify the probe times.

Use undo probe count to restore the default.

Syntax

probe count times

undo probe count

Default

In an UDP tracert operation, the NQA client sends three probe packets to each hop along the path.

In other types of operations, the NQA client performs one probe to the destination per operation.

Views

ICMP echo/TCP/UDP echo operation view

DHCP/DLSw/DNS/FTP/HTTP/SNMP operation view

UDP tracert operation view

ICMP jitter/UDP jitter operation view

Predefined user roles

network-admin

mdc-admin

Parameters

times: Specifies the probe times.

·     For the UDP tracert operation, this argument specifies the times of probes to each hop along the path. The value range for this argument is 1 to 10.

·     For other types of operations, this argument specifies the times of probes to the destination per operation. The value range for this argument is 1 to 15.

Usage guidelines

The following describes how NQA performs different types of operations:

·     A TCP or DLSw operation sets up a connection.

·     An ICMP jitter or UDP jitter operation sends a number of probe packets. The number of probe packets is set by using the probe packet-number command.

·     An FTP operation uploads or downloads a file.

·     An HTTP operation gets a Web page.

·     A DHCP operation gets an IP address through DHCP.

·     A DNS operation translates a domain name to an IP address.

·     An ICMP echo sends an ICMP echo request.

·     A UDP echo operation sends a UDP packet.

·     An SNMP operation sends one SNMPv1 packet, one SNMPv2c packet, and one SNMPv3 packet.

·     A UDP tracert operation determines the routing path from the source to the destination. The number of probe packets sent to each hop is set by using the probe count command.

·     A frame loss, latency, or throughput operation sends probe frames to the destination device to test the frame loss ratio, latency, or throughput of the network.

If an operation is to perform multiple probes, the NQA client starts a new probe in one of the following conditions:

·     The NQA client receives responses to packets sent in the last probe.

·     The probe timeout time expires.

This command is not available for the voice or path jitter operations. Each of these operations performs only one probe.

Examples

# Configure the ICMP echo operation to perform 10 probes.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] probe count 10

probe packet-interval

Use probe packet-interval to configure the packet sending interval in the probe.

Use undo probe packet-interval to restore the default.

Syntax

probe packet-interval interval

undo probe packet-interval

Default

The packet sending interval is 20 milliseconds.

Views

ICMP jitter/path jitter/UDP jitter/voice operation view

Predefined user roles

network-admin

mdc-admin

Parameters

interval: Specifies the sending interval in the range of 10 to 60000 milliseconds.

Examples

# Configure the UDP jitter operation to send packets every 100 milliseconds.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type udp-jitter

[Sysname-nqa-admin-test-udp-jitter] probe packet-interval 100

probe packet-number

Use probe packet-number to set the number of packets to be sent in a UDP jitter, path jitter, or voice probe.

Use undo probe packet-number to restore the default.

Syntax

probe packet-number packet-number

undo probe packet-number

Default

An ICMP jitter, UDP jitter, or path jitter probe sends 10 packets and a voice probe sends 1000 packets.

Views

ICMP jitter/path jitter/UDP jitter/voice operation view

Predefined user roles

network-admin

mdc-admin

Parameters

packet-number: Specifies the number of packets to be sent per probe. Available value ranges include:

·     10 to 1000 for the ICMP jitter, UDP jitter, and path jitter operations.

·     10 to 60000 for the voice operation.

Examples

# Configure the UDP jitter probe to send 100 packets.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type udp-jitter

[Sysname-nqa-admin-test-udp-jitter] probe packet-number 100

probe packet-timeout

Use probe packet-timeout to set the timeout time for waiting for a response in the UDP jitter, path jitter, or voice operation.

Use undo probe packet-timeout to restore the default.

Syntax

probe packet-timeout timeout

undo probe packet-timeout

Default

The response timeout time in the UDP jitter or path jitter operation is 3000 milliseconds.

The response timeout time in the voice operation is 5000 milliseconds.

Views

ICMP jitter/path jitter/UDP jitter/voice operation view

Predefined user roles

network-admin

mdc-admin

Parameters

timeout: Specifies the timeout time in milliseconds. The value range is 10 to 3600000.

Examples

# Set the response timeout time to 100 milliseconds in the UDP jitter operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type udp-jitter

[Sysname-nqa-admin-test-udp-jitter] probe packet-timeout 100

probe timeout

Use probe timeout to set the probe timeout time.

Use undo probe timeout to restore the default.

Syntax

probe timeout timeout

undo probe timeout

Default

The timeout time of a probe is 3000 milliseconds.

Views

ICMP echo/TCP/UDP echo operation view

DHCP/DLSw/DNS/FTP/HTTP/SNMP operation view

UDP tracert operation view

Any NQA template view

Predefined user roles

network-admin

mdc-admin

Parameters

timeout: Specifies the probe timeout time in milliseconds. The value range for this argument varies as follows:

·     For FTP and HTTP operations, the value range is 10 to 86400000.

·     For DHCP, DNS, DLSw, ICMP echo, SNMP, TCP, UDP echo, and UDP tracert operations, the value range is 10 to 3600000.

·     For FTP, HTTP, and HTTPS templates, the value range is 10 to 86400000.

·     For other types of NQA templates, the value range is 10 to 3600000.

Usage guidelines

If a probe does not complete within the period, the probe is timed out.

Examples

# Set the probe timeout time to 10000 milliseconds for the DHCP operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type dhcp

[Sysname-nqa-admin-test-dhcp] probe timeout 10000

# In HTTP template view, set the probe timeout time to 10000 milliseconds for the HTTP operation.

<Sysname> system-view

[Sysname] nqa template http httptplt

[Sysname-nqatplt-http-httptplt] probe timeout 10000

raw-request

Use raw-request to enter raw request view and specify the content of an HTTP or HTTPS request.

Use undo raw-request to restore the default.

Syntax

raw-request

undo raw-request

Default

The contents of an HTTP or HTTPS raw request are not specified.

Views

HTTP operation view

HTTP/HTTPS template view

Predefined user roles

network-admin

mdc-admin

Usage guidelines

This command places you in raw request view and deletes the previously configured request content.

If the HTTP or HTTPS operation type is set to raw, you must enter raw request view and configure the request content to be sent to the HTTP or HTTPS server. To ensure successful operations, make sure the request content does not contain command aliases configured by using the alias command. For more information about the alias command, see CLI commands in Fundamentals Command Reference.

Examples

# Enter raw request view and specify the content of a GET request for the HTTP operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type http

[Sysname-nqa-admin-test-http] raw-request

[Sysname-nqa-admin-test-http-raw-request] GET /sdn/ui/app/index HTTP/1.0\r\nHost: 172.0.0.2\r\n\r\n

# In HTTP template view, enter raw request view and specify the content of a POST request for the HTTP operation.

<Sysname> system-view

[Sysname] nqa template http httptplt

[Sysname-nqatplt-http-httptplt] raw-request

[Sysname-nqatplt-http-httptplt-raw-request] POST /sdn/ui/app/index HTTP/1.0\r\nHost:

 172.0.0.2\r\nAuthorization: Basic cm9vdDoxMjM0NTY=\r\n\r\n

reaction checked-element { jitter-ds | jitter-sd }

Use reaction checked-element { jitter-ds | jitter-sd } to configure a reaction entry for monitoring one-way jitter in the NQA operation.

Use undo reaction to delete a reaction entry.

Syntax

reaction item-number checked-element { jitter-ds | jitter-sd } threshold-type { accumulate accumulate-occurrences | average } threshold-value upper-threshold lower-threshold [ action-type { none | trap-only } ]

undo reaction item-number

Default

No reaction entries for monitoring one-way jitter exist.

Views

ICMP jitter/UDP jitter/voice operation view

Predefined user roles

network-admin

mdc-admin

Parameters

item-number: Assigns an ID to the reaction entry, in the range of 1 to 10.

jitter-ds: Specifies the destination-to-source jitter of each probe packet as the monitored element (or performance metric).

jitter-sd: Specifies source-to-destination jitter of each probe packet as the monitored element.

threshold-type: Specifies a threshold type.

accumulate accumulate-occurrences: Checks the total number of threshold violations in the operation. The value range is 1 to 14999 for the ICMP jitter and UDP jitter operations, and 1 to 59999 for the voice operation.

average: Checks the average one-way jitter.

threshold-value: Specifies threshold range in milliseconds.

upper-threshold: Specifies the upper limit in the range of 0 to 3600000.

lower-threshold: Specifies the lower limit in the range of 0 to 3600000. It must not be greater than the upper limit.

action-type: Specifies the action to be triggered. The default action is none.

none: Specifies the action of displaying results on the terminal display.

trap-only: Specifies the action of displaying results on the terminal display and meanwhile sending SNMP trap messages to the NMS.

Usage guidelines

You cannot edit a reaction entry after it is created. To change the attributes in a reaction entry, use the undo reaction command to delete the entry, and then configure a new one.

Only successful probe packets are monitored. Statistics about failed probe packets are not collected.

Examples

# Create reaction entry 1 for monitoring the average destination-to-source jitter of UDP jitter packets, and set the upper limit to 50 milliseconds and the lower limit to 5 milliseconds. Before the NQA operation starts, the initial state of the reaction entry is invalid. After the operation, the average destination-to-source jitter is checked against the threshold range. If it exceeds the upper limit, the state of the reaction entry is set to over-threshold. If it is below the lower limit, the state is set to below-threshold. Once the state of the reaction entry changes, a trap message is generated and sent to the NMS.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type udp-jitter

[Sysname-nqa-admin-test-udp-jitter] reaction 1 checked-element jitter-ds threshold-type average threshold-value 50 5 action-type trap-only

# Create reaction entry 2 for monitoring the destination-to-source jitter of UDP jitter probe packets, and set the upper limit to 50 milliseconds, and the lower limit to 5 milliseconds. Before the NQA operation starts, the initial state of the reaction entry is invalid. After the operation, the destination-to-source jitter is checked against the threshold range. If the total number of threshold violations reaches or exceeds 100, the state of the entry is set to over-threshold. Otherwise, the state of the entry is set to below-threshold. Once the state of the reaction entry changes, a trap message is generated and sent to the NMS.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type udp-jitter

[Sysname-nqa-admin-test-udp-jitter] reaction 2 checked-element jitter-ds threshold-type accumulate 100 threshold-value 50 5 action-type trap-only

reaction checked-element { owd-ds | owd-sd }

Use reaction checked-element { owd-ds | owd-sd } to configure a reaction entry for monitoring the one-way delay.

Use undo reaction to delete a reaction entry.

Syntax

reaction item-number checked-element { owd-ds | owd-sd } threshold-value upper-threshold lower-threshold

undo reaction item-number

Default

No reaction entries for monitoring the one-way delay exist.

Views

ICMP jitter/UDP jitter/voice operation view

Predefined user roles

network-admin

mdc-admin

Parameters

item-number: Assigns an ID to the reaction entry, in the range of 1 to 10.

owd-ds: Specifies the destination-to-source delay of each probe packet as the monitored element.

owd-sd: Specifies the source-to-destination delay of each probe packet as the monitored element.

threshold-value: Specifies threshold range in milliseconds.

upper-threshold: Specifies the upper limit in the range of 0 to 3600000.

lower-threshold: Specifies the lower limit in the range of 0 to 3600000. It must not be greater than the upper limit.

Usage guidelines

You cannot edit a reaction entry after it is created. To change the attributes in a reaction entry, use the undo reaction command to delete the entry, and then configure a new one.

Only successful probe packets are monitored. Statistics about failed probe packets are not collected.

No actions can be configured for a reaction entry of monitoring one-way delays. To display the monitoring results and statistics, use the display nqa reaction counters and display nqa statistics commands.

Examples

# Create reaction entry 1 for monitoring the destination-to-source delay of every UDP jitter packet, and set the upper limit to 50 milliseconds and lower limit to 5 milliseconds. Before the NQA operation starts, the initial state of the reaction entry is invalid. The destination-to-source delay is calculated after the response to the probe packet arrives. If the delay exceeds the upper limit, the state of the reaction entry is set to over-threshold. If it is below the lower limit, the state is set to below-threshold. Once the state of the reaction entry changes, a trap message is generated and sent to the NMS.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type udp-jitter

[Sysname-nqa-admin-test-udp-jitter] reaction 1 checked-element owd-ds threshold-value 50 5

reaction checked-element icpif

Use reaction checked-element icpif to configure a reaction entry for monitoring the ICPIF value in the voice operation.

Use undo reaction to delete a reaction entry.

Syntax

reaction item-number checked-element icpif threshold-value upper-threshold lower-threshold [ action-type { none | trap-only } ]

undo reaction item-number

Default

No reaction entries for monitoring ICPIF values exist.

Views

Voice operation view

Predefined user roles

network-admin

mdc-admin

Parameters

item-number: Assigns an ID to the reaction entry, in the range of 1 to 10.

threshold-value: Specifies threshold range.

upper-threshold: Specifies the upper limit in the range of 1 to 100.

lower-threshold: Specifies the lower limit in the range of 1 to 100. It must not be greater than the upper limit.

action-type: Specifies what action to be triggered. The default action is none.

none: Specifies the action of displaying results on the terminal display.

trap-only: Specifies the action of displaying results on the terminal display and meanwhile sending SNMP trap messages to the NMS.

Usage guidelines

You cannot edit a reaction entry after it is created. To change the attributes in a reaction entry, use the undo reaction command to delete the entry, and then configure a new one.

Examples

# Create reaction entry 1 for monitoring the ICPIF value in the voice operation, and set the upper limit to 50 and lower limit to 5. Before the voice operation starts, the initial state of the reaction entry is invalid. After the operation, the ICPIF value is checked against the threshold range. If it exceeds the upper limit, the state of the reaction entry is set to over-threshold. If it is below the lower limit, the state is set to below-threshold. Once the state of the reaction entry changes, a trap message is generated and sent to the NMS.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type voice

[Sysname-nqa-admin-test-voice] reaction 1 checked-element icpif threshold-value 50 5 action-type trap-only

reaction checked-element mos

Use reaction checked-element mos to configure a reaction entry for monitoring the MOS value in the voice operation.

Use undo reaction to delete a reaction entry.

Syntax

reaction item-number checked-element mos threshold-value upper-threshold lower-threshold [ action-type { none | trap-only } ]

undo reaction item-number

Default

No reaction entries for monitoring the MOS value exist.

Views

Voice operation view

Predefined user roles

network-admin

mdc-admin

Parameters

item-number: Assigns an ID to the reaction entry, in the range of 1 to 10.

threshold-value: Specifies threshold range.

upper-threshold: Specifies the upper limit in the range of 1 to 500.

lower-threshold: Specifies the lower limit in the range of 1 to 500. It must not be greater than the upper limit.

action-type: Specifies what action to be triggered. The default action is none.

none: Specifies the action of displaying results on the terminal display.

trap-only: Specifies the action of displaying results on the terminal display and meanwhile sending SNMP trap messages to the NMS.

Usage guidelines

You cannot edit a reaction entry after it is created. To change the attributes in a reaction entry, use the undo reaction command to delete the entry, and then configure a new one.

For the MOS threshold, the number is expressed in three digits representing ones, tenths, and hundredths. For example, to express a MOS threshold of 1, enter 100.

Examples

# Create reaction entry 1 for monitoring the MOS value of the voice operation, and set the upper limit to 2 and lower limit to 1. Before the NQA operation starts, the initial state of the reaction entry is invalid. After the operation, the MOS value is checked against the threshold range. If it exceeds the upper limit, the state of the reaction entry is set to over-threshold. If it is below the lower limit, the state is set to below-threshold. Once the state of the reaction entry changes, a trap message is generated and sent to the NMS.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type voice

[Sysname-nqa-admin-test-voice] reaction 1 checked-element mos threshold-value 200 100 action-type trap-only

reaction checked-element packet-loss

Use reaction checked-element packet-loss to configure a reaction entry for monitoring packet loss in UDP jitter or voice operation.

Use undo reaction to delete a reaction entry.

Syntax

reaction item-number checked-element packet-loss threshold-type accumulate accumulate-occurrences [ action-type { none | trap-only } ]

undo reaction item-number

Default

No reaction entries for monitoring packet loss exist.

Views

ICMP jitter/UDP jitter/voice operation view

Predefined user roles

network-admin

mdc-admin

Parameters

item-number: Assigns an ID to the reaction entry, in the range of 1 to 10.

threshold-type: Specifies a threshold type.

accumulate accumulate-occurrences: Specifies the total number of lost packets in the operation. The value range is 1 to 15000 for the ICMP jitter and UDP jitter operations and 1 to 60000 for the voice operation.

action-type: Specifies what action to be triggered. The default action is none.

none: Specifies the action of displaying results on the terminal display.

trap-only: Specifies the action of displaying results on the terminal display and meanwhile sending SNMP trap messages to the NMS.

Usage guidelines

You cannot edit a reaction entry after it is created. To change the attributes in a reaction entry, use the undo reaction command to delete the entry, and then configure a new one.

Examples

# Create reaction entry 1 for monitoring packet loss in the UDP jitter operation. Before the NQA operation starts, the initial state of the reaction entry is invalid. After the operation, the total number of the lost packets is checked against the threshold. If the number reaches or exceeds 100, the state of the reaction entry is set to over-threshold. Otherwise, the state is set to below-threshold. Once the state of the reaction entry changes, a trap message is generated and sent to the NMS.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type udp-jitter

[Sysname-nqa-admin-test-udp-jitter] reaction 1 checked-element packet-loss threshold-type accumulate 100 action-type trap-only

reaction checked-element probe-duration

Use reaction checked-element probe-duration to configure a reaction entry for monitoring the probe duration.

Use undo reaction to delete a reaction entry.

Syntax

reaction item-number checked-element probe-duration threshold-type { accumulate accumulate-occurrences | average | consecutive consecutive-occurrences } threshold-value upper-threshold lower-threshold [ action-type { none | trap-only } ]

undo reaction item-number

Default

No reaction entries for monitoring the probe duration exist.

Views

ICMP echo/TCP/UDP echo operation view

DHCP/DLSw/DNS/FTP/HTTP/SNMP operation view

Predefined user roles

network-admin

mdc-admin

Parameters

item-number: Assigns an ID to the reaction entry, in the range of 1 to 10.

threshold-type: Specifies a threshold type.

accumulate accumulate-occurrences: Checks the total number of threshold violations. The value range is 1 to 15.

average: Checks the average probe duration.

consecutive consecutive-occurrences: Specifies the number of consecutive threshold violations after the NQA operation starts. The value range is 1 to 16.

threshold-value: Specifies threshold range in milliseconds.

upper-threshold: Specifies the upper limit in the range of 0 to 3600000.

lower-threshold: Specifies the lower limit in the range of 0 to 3600000. It must not be greater than the upper threshold.

action-type: Specifies what action to be triggered. The default action is none.

none: Specifies the action of displaying results on the terminal display.

trap-only: Specifies the action of displaying results on the terminal display and meanwhile sending SNMP trap messages to the NMS. This keyword is not available for the DNS operation.

Usage guidelines

You cannot edit a reaction entry after it is created. To change the attributes in a reaction entry, use the undo reaction command to delete the entry, and then configure a new one.

Only successful probe packets are monitored. Statistics about failed probe packets are not collected.

Examples

# Create reaction entry 1 for monitoring the average probe duration of ICMP echo operation, and set the upper limit to 50 milliseconds and lower limit to 5 milliseconds. Before the NQA operation starts, the initial state of the reaction entry is invalid. After the operation, the average probe duration is checked. If it exceeds the upper limit, the state is set to over-threshold. If it is below the lower limit, the state of the reaction entry is set to below-threshold. Once the state of the reaction entry changes, a trap message is generated and sent to the NMS.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] reaction 1 checked-element probe-duration threshold-type average threshold-value 50 5 action-type trap-only

# Create reaction entry 2 for monitoring the probe duration of ICMP echo operation, and set the upper limit to 50 milliseconds and the lower limit to 5 milliseconds. Before the NQA operation starts, the initial state of the reaction entry is invalid. After the operation, the accumulated probe duration is checked against the threshold range. If the total number of threshold violations reaches or exceeds 10, the state of the entry is set to over-threshold. If it is below the lower threshold, the state of the entry is set to below-threshold. Once the state of the reaction entry changes, a trap message is generated and sent to the NMS.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] reaction 2 checked-element probe-duration threshold-type accumulate 10 threshold-value 50 5 action-type trap-only

# Create reaction entry 3 for monitoring the probe duration time of ICMP echo operation, and set the upper limit to 50 milliseconds and the lower limit to 5 milliseconds. Before the NQA operation starts, the initial state of the reaction entry is invalid. After the operation, the consecutive probe duration is checked against the threshold range. If the total number of consecutive threshold violations reaches or exceeds 10, the state of the entry is set to over-threshold. If it is below the lower threshold, the state of the entry is set to below-threshold. Once the state of the reaction entry changes, a trap message is generated and sent to the NMS.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] reaction 3 checked-element probe-duration threshold-type consecutive 10 threshold-value 50 5 action-type trap-only

reaction checked-element probe-fail (for trap)

Use reaction checked-element probe-fail to configure a reaction entry for monitoring the probe failures of the operation.

Use undo reaction to delete a reaction entry.

Syntax

reaction item-number checked-element probe-fail threshold-type { accumulate accumulate-occurrences | consecutive consecutive-occurrences } [ action-type { none | trap-only } ]

undo reaction item-number

Default

No reaction entries for monitoring probe failures exist.

Views

ICMP echo/TCP/UDP echo operation view

DHCP/DLSw/DNS/FTP/HTTP/SNMP operation view

Predefined user roles

network-admin

mdc-admin

Parameters

item-number: Assigns an ID to the reaction entry, in the range of 1 to 10.

threshold-type: Specifies a threshold type.

accumulate accumulate-occurrences: Checks the total number of probe failures. The value range is 1 to 15.

consecutive consecutive-occurrences: Checks the maximum number of consecutive probe failures. The value range is 1 to 16.

action-type: Specifies what action to be triggered. The default action is none.

none: Specifies the action of displaying results on the terminal display.

trap-only: Specifies the action of displaying results on the terminal display and meanwhile sending SNMP trap messages to the NMS. This keyword is not available for the DNS operation.

Usage guidelines

You cannot edit a reaction entry after it is created. To change the attributes in a reaction entry, use the undo reaction command to delete the entry, and then configure a new one.

Examples

# Create reaction entry 1 for monitoring the probe failures in ICMP echo operation. Before the NQA operation starts, the initial state of the reaction entry is invalid. If the total number of probe failures reaches or exceeds 10, the state of the entry is set to over-threshold. If it is below the threshold, the state of the entry is set to below-threshold. Once the state of the reaction entry changes, a trap message is generated and sent to the NMS.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] reaction 1 checked-element probe-fail threshold-type accumulate 10 action-type trap-only

# Create reaction entry 2 for monitoring the probe failures in ICMP echo operation. Before the NQA operation starts, the initial state of the reaction entry is invalid. If the number of consecutive probe failures reaches or exceeds 10, the state of the entry is set to over-threshold. If it is below the threshold, the state of the entry is set to below-threshold. Once the state of the reaction entry changes, a trap message is generated and sent to the NMS.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] reaction 2 checked-element probe-fail threshold-type consecutive 10 action-type trap-only

reaction checked-element probe-fail (for trigger)

Use reaction checked-element probe-fail to configure a reaction entry for monitoring probe failures.

Use undo reaction to delete a reaction entry.

Syntax

reaction item-number checked-element probe-fail threshold-type consecutive consecutive-occurrences action-type trigger-only

undo reaction item-number

Default

No reaction entries for monitoring probe failures exist.

Views

ICMP echo/TCP/UDP echo operation view

DHCP/DLSw/DNS/FTP/HTTP/SNMP operation view

Predefined user roles

network-admin

mdc-admin

Parameters

item-number: Assigns an ID to the reaction entry, in the range of 1 to 10.

threshold-type: Specifies a threshold type.

consecutive consecutive-occurrences: Checks the maximum number of consecutive probe failures, in the range of 1 to 16.

action-type: Specifies what action to be triggered.

trigger-only: Triggers other modules to react to certain conditions.

Usage guidelines

You cannot edit a reaction entry after it is created. To change the attributes in a reaction entry, use the undo reaction command to delete the entry, and then configure a new one.

Examples

# Create reaction entry 1. If the number of consecutive probe failures reaches 3, collaboration is triggered.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type tcp

[Sysname-nqa-admin-test-tcp] reaction 1 checked-element probe-fail threshold-type consecutive 3 action-type trigger-only

Related commands

track (High Availability Command Reference)

reaction checked-element rtt

Use reaction checked-element rtt to configure a reaction entry for monitoring packet round-trip time.

Use undo reaction to delete a reaction entry.

Syntax

reaction item-number checked-element rtt threshold-type { accumulate accumulate-occurrences | average } threshold-value upper-threshold lower-threshold [ action-type { none | trap-only } ]

undo reaction item-number

Default

No reaction entries for monitoring packet round-trip time exist.

Views

ICMP jitter/UDP jitter/voice operation view

Predefined user roles

network-admin

mdc-admin

Parameters

item-number: Assigns an ID to the reaction entry, in the range of 1 to 10.

threshold-type: Specifies a threshold type.

accumulate accumulate-occurrences: Checks the total number of threshold violations. Available value ranges include:

·     1 to 15000 for the ICMP jitter and UDP jitter operations.

·     1 to 60000 for the voice operation.

average: Checks the packet average round-trip time.

threshold-value: Specifies threshold range in milliseconds.

upper-threshold: Specifies the upper limit in the range of 0 to 3600000.

lower-threshold: Specifies the lower limit in the range of 0 to 3600000. It must not be greater than the upper limit.

action-type: Specifies what action to be triggered. The default action is none.

none: Specifies the action of displaying results on the terminal display.

trap-only: Specifies the action of displaying results on the terminal display and meanwhile sending SNMP trap messages to the NMS.

Usage guidelines

You cannot edit a reaction entry after it is created. To change the attributes in a reaction entry, use the undo reaction command to delete the entry, and then configure a new one.

Only successful probe packets are monitored. Statistics about failed probe packets are not collected.

Examples

# Create reaction entry 1 for monitoring the average round-trip time of UDP jitter probe packets, and set the upper limit to 50 milliseconds and lower limit to 5 milliseconds. Before the NQA operation starts, the initial state of the reaction entry is invalid. After the operation, the average packet round-trip time is checked. If it exceeds the upper limit, the state is set to over-threshold. If it is below the lower limit, the state is set to below-threshold. Once the reaction entry state changes, a trap message is generated and sent to the NMS.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type udp-jitter

[Sysname-nqa-admin-test-udp-jitter] reaction 1 checked-element rtt threshold-type average threshold-value 50 5 action-type trap-only

# Create reaction entry 2 for monitoring the round-trip time of UDP jitter probe packets, and set the upper limit to 50 milliseconds and lower limit to 5 milliseconds. Before the NQA operation starts, the initial state of the reaction entry is invalid. After the operation, the packet round-trip time is checked. If the total number of threshold violations reaches or exceeds 100, the state of the entry is set to over-threshold. Otherwise, the state of the entry is set to below-threshold. Once the state of the reaction entry changes, a trap message is generated and sent to the NMS.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type udp-jitter

[Sysname-nqa-admin-test-udp-jitter] reaction 1 checked-element rtt threshold-type accumulate 100 threshold-value 50 5 action-type trap-only

reaction trap

Use reaction trap to configure the sending of traps to the NMS under specific conditions.

Use undo reaction trap to restore the default.

Syntax

reaction trap { path-change | probe-failure consecutive-probe-failures | test-complete | test-failure [ accumulate-probe-failures ] }

undo reaction trap { path-change | probe-failure | test-complete | test-failure }

Default

No traps are sent to the NMS.

Views

ICMP echo/TCP/UDP echo operation view

DHCP/DLSw/DNS/FTP/HTTP/SNMP operation view

UDP tracert operation view

ICMP jitter/UDP jitter/voice operation view

Predefined user roles

network-admin

mdc-admin

Parameters

path-change: Sends a trap when the UDP tracert operation detects a different path to the destination.

probe-failure consecutive-probe-failures: Sends a trap to the NMS if the number of consecutive probe failures in an operation is greater than or equal to consecutive-probe-failures. The value range for the consecutive-probe-failures argument is 1 to 15. The system counts the number of consecutive probe failures for each operation, so multiple traps might be sent.

test-complete: Sends a trap to indicate that the operation is completed.

test-failure: Sends a trap when an operation fails. For operations other than UDP tracert operation, the system counts the total number of probe failures in an operation. If the number reaches or exceeds the value for the accumulate-probe-failures argument, a trap is sent for the operation failure.

accumulate-probe-failures: Specifies the total number of probe failures in an operation. The value range is 1 to 15. This argument is not supported by the UDP tracert operation.

Usage guidelines

The ICMP jitter, UDP jitter, and voice operations support only the test-complete keyword.

The following parameters are not available for the UDP tracert operation:

·     The probe-failure consecutive-probe-failures option.

·     The accumulate-probe-failures argument.

Examples

# Configure the system to send a trap if five or more consecutive probe failures occur in an ICMP echo operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] reaction trap probe-failure 5

reaction trigger per-probe

Use reaction trigger per-probe to configure the probe result sending on a per-probe basis.

Use undo reaction trigger per-probe to restore the default.

Syntax

reaction trigger per-probe

undo reaction trigger per-probe

Default

The probe result is sent to the feature that uses the template after three consecutive failed or successful probes.

Views

ICMP/TCP half open template view

Predefined user roles

network-admin

mdc-admin

Usage guidelines

The feature enables the NQA client to send the probe result to the feature that uses the NQA template every time a probe is completed.

If you execute this command and the reaction trigger probe-fail command multiple times, the most recent configuration takes effect.

If you execute this command and the reaction trigger probe-pass command multiple times, the most recent configuration takes effect.

Examples

# In ICMP template view, configure the probe result sending on a per-probe basis.

<Sysname> system-view

[Sysname] nqa template icmp icmptplt

[Sysname-nqatplt-icmp-icmptplt] reaction trigger per-probe

Related commands

reaction trigger probe-fail

reaction trigger probe-pass

reaction trigger probe-fail

Use reaction trigger probe-fail to set the number of consecutive probe failures to determine an operation failure.

Use undo reaction trigger probe-fail to restore the default.

Syntax

reaction trigger probe-fail count

undo reaction trigger probe-fail

Default

The NQA client notifies the feature of the operation failure when the number of consecutive probe failures reaches 3.

Views

Any NQA template view

Predefined user roles

network-admin

mdc-admin

Parameters

count: Specifies the number of consecutive probe failures, in the range of 1 to 15.

Usage guidelines

If the number of consecutive probe failures is reached, the NQA client notifies the feature that uses the NQA template of the operation failure.

If you execute this command and the reaction trigger per-probe command multiple times, the most recent configuration takes effect.

Examples

# In HTTP template view, configure the NQA client to notify the feature of the operation failure when the number of consecutive probe failures reaches 5.

<Sysname> system-view

[Sysname] nqa template http httptplt

[Sysname-nqatplt-http-httptplt] reaction trigger probe-fail 5

Related commands

reaction trigger per-probe

reaction trigger probe-pass

reaction trigger probe-pass

Use reaction trigger probe-pass to set the number of consecutive successful probes to determine a successful operation event.

Use undo reaction trigger probe-pass to restore the default.

Syntax

reaction trigger probe-pass count

undo reaction trigger probe-pass

Default

The NQA client notifies the feature of the successful operation event if the number of consecutive successful probes reaches 3.

Views

Any NQA template view

Predefined user roles

network-admin

mdc-admin

Parameters

count: Specifies the number of consecutive successful probes, in the range of 1 to 15.

Usage guidelines

If number of consecutive successful probes is reached, the NQA client notifies the feature that uses the template of the successful operation event.

If you execute this command and the reaction trigger per-probe command multiple times, the most configuration takes effect.

Examples

# In HTTP template view, configure the NQA client to notify the feature of the successful operation event if the number of consecutive successful probes reaches 5.

<Sysname> system-view

[Sysname] nqa template http httptplt

[Sysname-nqatplt-http-httptplt] reaction trigger probe-pass 5

Related commands

reaction trigger per-probe

reaction trigger probe-fail

resolve-target

Use resolve-target to specify the domain name to be resolved in the DNS operation.

Use undo resolve-target to restore the default.

Syntax

resolve-target domain-name

undo resolve-target

Default

The domain name to be resolved in the DNS operation is not specified.

Views

DNS operation view

DNS template view

Predefined user roles

network-admin

mdc-admin

Parameters

domain-name: Specifies the domain name to be resolved. It is a dot-separated case-sensitive string of 1 to 255 characters including letters, digits, hyphens (-), and underscores (_) (for example, aabbcc.com). Each part consists of 1 to 63 characters, and consecutive dots (.) are not allowed.

Examples

# Specify domain1 as the domain name to be resolved.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type dns

[Sysname-nqa-admin-test-dns] resolve-target domain1

# In DNS template view, specify domain1 as the domain name to be resolved.

<Sysname> system-view

[Sysname] nqa template dns dnstplt

[Sysname-nqatplt-dns-dnstplt] resolve-target domain1

resolve-type

Use resolve-type to configure the domain name resolution type.

Use undo resolve-type to restore the default.

Syntax

resolve-type { A | AAAA }

undo resolve-type

Default

The domain name resolution type is type A.

Views

DNS template view

Predefined user roles

network-admin

mdc-admin

Parameters

A: Specifies the type A queries. A type A query resolves a domain name to a mapped IPv4 address.

AAAA: Specifies the type AAAA queries. A type AAAA query resolves a domain name to a mapped IPv6 address.

Examples

# In DNS template view, set the domain name resolution type to A.

<Sysname> system-view

[Sysname] nqa template dns dnstplt

[Sysname-nqatplt-dns-dnstplt] resolve-type A

route-option bypass-route

Use route-option bypass-route to enable the routing table bypass feature to test the connectivity to the direct destination.

Use undo route-option bypass-route to disable the routing table bypass feature.

Syntax

route-option bypass-route

undo route-option bypass-route

Default

The routing table bypass feature is disabled.

Views

ICMP echo/TCP/UDP echo operation view

DLSw/DNS/FTP/HTTP/SNMP operation view

UDP tracert operation view

ICMP jitter/UDP jitter/voice operation view

Predefined user roles

network-admin

mdc-admin

Usage guidelines

When the routing table bypass feature is enabled, the following events occur:

·     The routing table is not searched. Packets are sent to the destination on a directly connected network.

·     The TTL value in the probe packet is set to 1. The TTL set in the ttl command does not take effect.

This command does not take effect if the destination address of the NQA operation is an IPv6 address.

Examples

# Enable the routing table bypass feature.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] route-option bypass-route

source interface (ICMP echo/UDP tracert operation view)

Use source interface to specify the IP address of an interface as the source IP address of probe packets.

Use undo source interface to restore the default.

Syntax

source interface interface-type interface-number

undo source interface

Default

The probe packets take the primary IP address of the outgoing interface as their source IP address.

Views

ICMP echo operation view

UDP tracert operation view

ICMP template view

Predefined user roles

network-admin

mdc-admin

Parameters

interface-type interface-number: Specifies an interface by its type and number.

Usage guidelines

The specified interface must be up. If the interface is down, no probe requests can be sent out.

If you execute this command and the source ip or source ipv6 command for an ICMP echo operation or ICMP template multiple times, the most recent configuration takes effect.

If you execute this command and the source ip command for a UDP tracert operation multiple times, the most recent configuration takes effect.

Examples

# Specify the IP address of the interface VLAN-interface 1 as the source IP address of ICMP echo request packets.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] source interface vlan-interface 1

# In ICMP template view, specify the IP address of the interface VLAN-interface 1 as the source IP address of ICMP echo request packets.

<Sysname> system-view

[Sysname] nqa template icmp icmptplt

[Sysname-nqatplt-icmp-icmptplt] source interface vlan-interface 1

Related commands

source ip

source ipv6

source ip

Use source ip to configure the source IPv4 address for probe packets.

Use undo source ip to restore the default.

Syntax

source ip ip-address

undo source ip

Default

The probe packets takes the primary IP address of their output interface as the source IPv4 address.

Views

ICMP echo/TCP/UDP echo operation view

DHCP/DLSw/FTP/HTTP/SNMP operation view

UDP tracert operation view

ICMP jitter/path jitter/UDP jitter/voice operation view

Any NQA template view

Predefined user roles

network-admin

mdc-admin

Parameters

ip-address: Specifies the source IPv4 address for probe packets.

Usage guidelines

The specified source IP address must be the IPv4 address of a local interface, and the local interface must be up. Otherwise, no probe packets can be sent out.

For an NQA template, if the source and destination addresses have different IP versions, the source address does not take effect.

If you execute the source interface and source ip commands multiple times for an ICMP echo operation, ICMP template, or UDP tracert operation, the most recent configuration takes effect.

Examples

# Specify 10.1.1.1 as the source IPv4 address for ICMP echo requests.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] source ip 10.1.1.1

# In ICMP template view, specify 10.1.1.1 as the source IPv4 address for ICMP echo requests.

<Sysname> system-view

[Sysname] nqa template icmp icmptplt

[Sysname-nqatplt-icmp-icmptplt] source ip 10.1.1.1

Related commands

source interface

source ipv6

Use source ipv6 to configure the source IPv6 address for probe packets.

Use undo source ipv6 to restore the default.

Syntax

source ipv6 ipv6-address

undo source ipv6

Default

The probe packets takes the IPv6 address of their output interface as the source IPv6 address.

Views

ICMP echo operation view

Any NQA template view

Predefined user roles

network-admin

mdc-admin

Parameters

ipv6-address: Specifies the source IPv6 address for probe packets. IPv6 link-local addresses are not supported.

Usage guidelines

The specified source IPv6 address must be the IPv6 address of a local interface. The local interface must be up. Otherwise, no probe packets can be sent out.

For an NQA template, if the source and destination addresses have different IP versions, the source address does not take effect.

If you execute the source interface and source ipv6 commands multiple times for an ICMP echo operation or ICMP template, the most recent configuration takes effect.

Examples

# Specify 1::1 as the source IPv6 address for the ICMP echo operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] source ipv6 1::1

# In ICMP template view, specify 1::1 as the source IPv6 address for ICMP echo requests.

<Sysname> system-view

[Sysname] nqa template icmp icmptplt

[Sysname-nqatplt-icmp-icmptplt] source ipv6 1::1

Related commands

source interface

source port

Use source port to configure the source port number for probe packets.

Use undo source port to restore the default.

Syntax

source port port-number

undo source port

Default

The source port number is not specified.

Views

UDP echo operation view

SNMP operation view

UDP tracert operation view

UDP jitter/voice operation view

DNS template view

Predefined user roles

network-admin

mdc-admin

Parameters

port-number: Specifies the source port number in the range of 1 to 65535.

Examples

# Set the source port number to 8000 for probe packets in the UDP echo operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type udp-echo

[Sysname-nqa-admin-test-udp-echo] source port 8000

# In DNS template view, set the source port number to 8000 for probe packets in the DNS operation.

<Sysname> system-view

[Sysname] nqa template dns dnstplt

[Sysname-nqatplt-dns-dnstplt] source port 8000

ssl-client-policy

Use ssl-client-policy to specify an SSL client policy for an HTTPS or SSL template.

Use undo ssl-client-policy to restore the default.

Syntax

ssl-client-policy policy-name

undo ssl-client-policy

Default

No SSL client policy is specified for an HTTPS or SSL template.

Views

HTTPS/SSL template view

Predefined user roles

network-admin

mdc-admin

Parameters

policy-name: Specifies an SSL client policy by its name, a case-insensitive string of 1 to 31 characters.

Usage guidelines

In the HTTPS or SSL operation, the NQA client uses the specified SSL client policy to establish an SSL connection to the server.

Examples

# Specify SSL client policy policy for SSL template ssltplt.

<Sysname> system-view

[Sysname] nqa template ssl ssltplt

[Sysname-nqatplt-ssl-ssltplt] ssl-client-policy policy

statistics hold-time

Use statistics hold-time to set the hold time of statistics groups for an NQA operation.

Use undo statistics hold-time to restore the default.

Syntax

statistics hold-time hold-time

undo statistics hold-time

Default

The hold time of statistics groups for an NQA operation is 120 minutes.

Views

ICMP echo/TCP/UDP echo operation view

DHCP/DLSw/DNS/FTP/HTTP/SNMP operation view

ICMP jitter/path jitter/UDP jitter/voice operation view

Predefined user roles

network-admin

mdc-admin

Parameters

hold-time: Specifies the hold time in minutes, in the range of 1 to 1440.

Usage guidelines

A statistics group is deleted when its hold time expires.

Examples

# Set the hold time to 3 minutes for statistics groups of the ICMP echo operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] statistics hold-time 3

statistics interval

Use statistics interval to set the statistics collection interval for an NQA operation.

Use undo statistics interval to restore the default.

Syntax

statistics interval interval

undo statistics interval

Default

The statistics collection interval is 60 minutes.

Views

ICMP echo/TCP/UDP echo operation view

DHCP/DLSw/DNS/FTP/HTTP/SNMP operation view

ICMP jitter/path jitter/UDP jitter/voice operation view

Predefined user roles

network-admin

mdc-admin

Parameters

interval: Specifies the interval in minutes, in the range of 1 to 35791394.

Usage guidelines

NQA forms statistics within the same collection interval as a statistics group. To display information about the statistics groups, use the display nqa statistics command.

Examples

# Configure NQA to collect the ICMP echo operation statistics every 2 minutes.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] statistics interval 2

statistics max-group

Use statistics max-group to set the maximum number of statistics groups that can be saved.

Use undo statistics max-group to restore the default.

Syntax

statistics max-group number

undo statistics max-group

Default

A maximum of two statistics groups can be saved.

Views

ICMP echo/TCP/UDP echo operation view

DHCP/DLSw/DNS/FTP/HTTP/SNMP operation view

ICMP jitter/path jitter/UDP jitter/voice operation view

Predefined user roles

network-admin

mdc-admin

Parameters

number: Specifies the maximum number of statistics groups, in the range of 0 to 100. To disable statistics collection, set the value to 0.

Usage guidelines

When the maximum number of statistics groups is reached and a new statistics group is to be saved, the earliest statistics group is deleted.

Examples

# Configure NQA to save a maximum of five statistics groups for the ICMP echo operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] statistics max-group 5

target-only

Use target-only to perform the path jitter operation only on the destination address.

Use undo target-only to restore the default.

Syntax

target-only

undo target-only

Default

NQA performs the path jitter operation to the destination hop by hop.

Views

Path jitter operation view

Predefined user roles

network-admin

mdc-admin

Examples

# Perform the path jitter operation only on the destination address.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type path-jitter

[Sysname-nqa-admin-test-path-jitter] target-only

tos

Use tos to set the ToS value in the IP header for probe packets.

Use undo tos to restore the default.

Syntax

tos value

undo tos

Default

The ToS value in the IP header of probe packets is 0.

Views

Any operation view

Any NQA template view

Predefined user roles

network-admin

mdc-admin

Parameters

value: Specifies the ToS value in the range of 0 to 255.

Examples

# In ICMP echo operation view, set the ToS value to 1 in the IP header for probe packets.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] tos 1

# In ICMP template view, set the ToS value to 1 in the IP header for probe packets.

<Sysname> system-view

[Sysname] nqa template icmp icmptplt

[Sysname-nqatplt-icmp-icmptplt] tos 1

ttl

Use ttl to set the maximum number of hops that the probe packets can traverse.

Use undo ttl to restore the default.

Syntax

ttl value

undo ttl

Default

The maximum number of hops is 30 for probe packets of the UDP tracert operation, and is 20 for probe packets of other types of operations.

Views

ICMP echo/TCP/UDP echo operation view

DLSw/DNS/FTP/HTTP/SNMP operation view

UDP tracert operation view

ICMP jitter/UDP jitter/voice operation view

Any NQA template view

Predefined user roles

network-admin

mdc-admin

Parameters

value: Specifies the maximum number of hops that the probe packets can traverse, in the range of 1 to 255.

Usage guidelines

The route-option bypass-route command sets the TTL to 1 for probe packets. If you configure both the route-option bypass-route and ttl commands for an operation, the ttl command does not take effect.

For a successful UDP tracert operation, make sure the maximum number of hops is not smaller than the value set in the init-ttl command.

Examples

# Set the maximum number of hops to 16 for probe packets in the ICMP echo operation.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] ttl 16

# In ICMP template view, set the maximum number of hops to 16 for probe packets.

<Sysname> system-view

[Sysname] nqa template icmp icmptplt

[Sysname-nqatplt-icmp-icmptplt] ttl 16

type

Use type to specify an NQA operation type and enter its view.

Syntax

type { dhcp | dlsw | dns | ftp | http | icmp-echo | icmp-jitter | path-jitter | snmp | tcp | udp-echo | udp-jitter | udp-tracert | voice }

Default

No operation type is specified.

Views

NQA operation view

Predefined user roles

network-admin

mdc-admin

Parameters

dhcp: Specifies the DHCP operation type.

dlsw: Specifies the DLSw operation type.

dns: Specifies the DNS operation type.

ftp: Specifies the FTP operation type.

http: Specifies the HTTP operation type.

icmp-echo: Specifies the ICMP echo operation type.

icmp-jitter: Specifies the ICMP jitter operation type.

path-jitter: Specifies the path jitter operation type.

snmp: Specifies the SNMP operation type.

tcp: Specifies the TCP operation type.

udp-echo: Specifies the UDP echo operation type.

udp-jitter: Specifies the UDP jitter operation type.

udp-tracert: Specifies the UDP tracert operation type.

voice: Specifies the voice operation type.

Usage guidelines

You can specify only one type for an NQA operation. After that, you can configure the operation type-related settings for the NQA operation. To change the type of the NQA operation, remove the NQA operation in system view, and then re-create the NQA operation.

Examples

# Specify FTP as the NQA operation type and enter FTP operation view.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type ftp

[Sysname-nqa-admin-test-ftp]

url

Use url to specify the URL of the destination.

Use undo url to restore the default.

Syntax

url url

undo url

Default

The destination URL is not specified.

Views

FTP/HTTP operation view

FTP/HTTP/HTTPS template view

Predefined user roles

network-admin

mdc-admin

Parameters

url: Specifies the URL of the destination server, a case-sensitive string of 1 to 255 characters. The following table describes the URL format and parameters for different operations.

 

Operation

URL format

Parameter description

HTTP operation

http://host/resource

http://host:port/resource

The host parameter represents the host name of the destination server. The host name is a dot-separated case-sensitive string including letters, digits, hyphens (-), and underscores (_). Host names are composed of series of labels, aabbcc.com for example. Each label consists of 1 to 63 characters. Consecutive dots (.) and question marks are not allowed.

For description about the filename parameter, see Fundamentals Configuration Guide.

HTTPS operation

https://host/resource

https://host:port/resource

FTP operation

ftp://host/filename

ftp://host:port/filename

 

Examples

# Configure the URL that the HTTP operation visits as http://www.company.com/index.htm.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type http

[Sysname-nqa-admin-test-http] url http://www.company.com/index.html

# In HTTP template view, configure the URL that the HTTP operation visits as http://www.company.com/index.htm.

<Sysname> system-view

[Sysname] nqa template http httptplt

[Sysname-nqatplt-http-httptplt] url http://www.company.com/index.html

username

Use username to specify a username.

Use undo username to restore the default.

Syntax

username username

undo username

Default

No username is configured.

Views

FTP/HTTP operation view

FTP/HTTP/HTTPS/RADIUS template view

Predefined user roles

network-admin

mdc-admin

Parameters

username: Specifies the username. This argument is case sensitive. It is a string of 1 to 32 characters for an FTP, HTTP, or HTTPS username, and a string of 1 to 253 characters for a RADIUS authentication username.

Examples

# Set the FTP login username to administrator.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type ftp

[Sysname-nqa-admin-test-ftp] username administrator

# Set the FTP login username to administrator in FTP template view.

<Sysname> system-view

[Sysname] nqa template ftp ftptplt

[Sysname-nqatplt-ftp-ftptplt] username administrator

Related commands

operation

password

version

Use version to specify the version used in the HTTP or HTTPS operation.

Use undo version to restore the default.

Syntax

version { v1.0 | v1.1 }

undo version

Default

Version 1.0 is used in the HTTP operation or HTTPS operation.

Views

HTTP operation view

HTTP/HTTPS template view

Predefined user roles

network-admin

mdc-admin

Parameters

v1.0: Uses version 1.0.

v1.1: Uses version 1.1.

Examples

# Configure the HTTP operation to use the HTTP version 1.1.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type http

[Sysname-nqa-admin-test-http] version v1.1

vpn-instance

Use vpn-instance to apply the operation to a VPN instance.

Use undo vpn-instance to restore the default.

Syntax

vpn-instance vpn-instance-name

undo vpn-instance

Default

The operation applies to the public network.

Views

ICMP echo/TCP/UDP echo operation view

DHCP/DLSw/DNS/FTP/HTTP/SNMP operation view

UDP tracert operation view

ICMP jitter/path jitter/UDP jitter/voice operation view

Any NQA template view

Predefined user roles

network-admin

mdc-admin

Parameters

vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string of 1 to 31 characters.

Usage guidelines

After you specify the VPN, the NQA operation tests the connectivity in the specified VPN instance.

Examples

# Apply the ICMP echo operation to vpn1.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type icmp-echo

[Sysname-nqa-admin-test-icmp-echo] vpn-instance vpn1

# In FTP template view, apply the FTP operation to vpn1.

<Sysname> system-view

[Sysname] nqa template ftp ftptplt

[Sysname-nqatplt-ftp-ftptplt] vpn-instance vpn1

NQA server commands

IMPORTANT

IMPORTANT:

Configure the NQA server only for UDP jitter, TCP, UDP echo, and voice operations.

 

display nqa server

Use display nqa server status to display NQA server status.

Syntax

display nqa server

Views

Any view

Predefined user roles

network-admin

network-operator

mdc-admin

mdc-operator

Examples

# Display NQA server status.

<Sysname> display nqa server

NQA server status: Enabled

TCP connect:

   IP address          Port      Tos    VPN instance

   2.2.2.2             2000      200    -

UDP echo:

   IP address          Port      Tos    VPN instance

   3.3.3.3             3000      255    -

Table 10 Command output

Field

Description

NQA server status

Whether the NQA server is enabled.

TCP connect

Information about the TCP listening service on the NQA server.

UDP echo

Information about the UDP listening service on the NQA server.

IP address

IP address specified for the TCP/UDP listening service on the NQA server.

Port

Port number specified for the TCP/UDP listening service on the NQA server.

Tos

ToS value in reply packets sent by the NQA server.

VPN instance

 

Name of the VPN instance to which the IP address that the NQA server listens on belongs. This field displays a hyphen (-) if the NQA server listens on a public IP address.

Related commands

nqa server enable

nqa server tcp-connect

nqa server udp-echo

nqa server enable

Use nqa server enable to enable the NQA server.

Use undo nqa server enable to disable the NQA server.

Syntax

nqa server enable

undo nqa server enable

Default

The NQA server is disabled.

Views

System view

Predefined user roles

network-admin

mdc-admin

Examples

# Enable the NQA server.

<Sysname> system-view

[Sysname] nqa server enable

Related commands

display nqa server

nqa server tcp-connect

nqa server udp-echo

nqa server tcp-connect

Use nqa server tcp-connect to configure a TCP listening service to enable the NQA server to listen to a port on an IP address.

Use undo nqa server tcp-connect to remove a TCP listening service.

Syntax

nqa server tcp-connect ip-address port-number [ vpn-instance vpn-instance-name ] [ tos tos ]

undo nqa server tcp-connect ip-address port-number [ vpn-instance vpn-instance-name ]

Default

No TCP listening services exist.

Views

System view

Predefined user roles

network-admin

mdc-admin

Parameters

ip-address: Specifies the IP address for the TCP listening service.

port-number: Specifies the port number for the TCP listening service, in the range of 1 to 65535.

vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string of 1 to 31 characters. If you do not specify this option, the NQA server listens on a public IP address.

tos tos: Specifies the ToS value in the IP header for reply packets. The value range is 0 to 255, and the default value is 0.

Usage guidelines

Use this command on the NQA server only for the TCP operation.

When you configure the IP address and port number for a TCP listening service on the NQA server, follow these restrictions and guidelines:

·     The IP address, port number, and VPN instance must be unique on the NQA server and match the configuration on the NQA client.

·     The IP address must be the address of an interface on the NQA server.

·     To ensure successful NQA operations and avoid affecting existing services, do not configure the TCP listening service on well-known ports from 1 to 1023.

Examples

# Configure a TCP listening service to enable the NQA server to listen to port 9000 on the IP address 169.254.10.2.

<Sysname> system-view

[Sysname] nqa server tcp-connect 169.254.10.2 9000

Related commands

display nqa server

nqa server enable

nqa server udp-echo

Use nqa server udp-echo to configure a UDP listening service to enable the NQA server to listen to a port on an IP address.

Use undo nqa server udp-echo to remove the UDP listening service created.

Syntax

nqa server udp-echo ip-address port-number [ vpn-instance vpn-instance-name ][ tos tos ]

undo nqa server udp-echo ip-address port-number [ vpn-instance vpn-instance-name ]

Default

No UDP listening services exist.

Views

System view

Predefined user roles

network-admin

mdc-admin

Parameters

ip-address: Specifies the IP address for the UDP listening service.

port-number: Specifies the port number for the UDP listening service, in the range of 1 to 65535.

vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string of 1 to 31 characters. If you do not specify this option, the NQA server listens on a public IP address.

tos tos: Specifies the ToS value in the IP header for reply packets. The value range for this argument is 0 to 255, and the default value is 0.

Usage guidelines

Use this command on the NQA server only for the UDP jitter, UDP echo, and voice operations.

When you configure the IP address and port number for a UDP listening service on the NQA server, follow these restrictions and guidelines:

·     The IP address, port number, and VPN instance must be unique on the NQA server and match the configuration on the NQA client.

·     The IP address must be the address of an interface on the NQA server.

·     To ensure successful NQA operations and avoid affecting existing services, do not configure the UDP listening service on well-known ports from 1 to 1023.

Examples

# Configure a UDP listening service to enable the NQA server to listen to port 9000 on the IP address 169.254.10.2.

<Sysname> system-view

[Sysname] nqa server udp-echo 169.254.10.2 9000

Related commands

display nqa server

nqa server enable

  • Cloud & AI
  • InterConnect
  • Intelligent Computing
  • Security
  • SMB Products
  • Intelligent Terminal Products
  • Product Support Services
  • Technical Service Solutions
All Services
  • Resource Center
  • Policy
  • Online Help
All Support
  • Become a Partner
  • Partner Resources
  • Partner Business Management
All Partners
  • Profile
  • News & Events
  • Online Exhibition Center
  • Contact Us
All About Us
新华三官网