Contents

IPv6 PIM snooping commands· 1

display ipv6 pim-snooping neighbor 1

display ipv6 pim-snooping router-port 2

display ipv6 pim-snooping routing-table· 3

display ipv6 pim-snooping statistics· 5

ipv6 pim-snooping enable· 6

ipv6 pim-snooping graceful-restart join-aging-time· 7

ipv6 pim-snooping graceful-restart neighbor-aging-time· 8

reset ipv6 pim-snooping statistics· 9

 

IPv6 PIM snooping commands

display ipv6 pim-snooping neighbor

Use display ipv6 pim-snooping neighbor to display IPv6 PIM snooping neighbor information.

Syntax

In standalone mode:

display ipv6 pim-snooping neighbor [ vlan vlan-id ] [ slot slot-number ] [ verbose ]

In IRF mode:

display ipv6 pim-snooping neighbor [ vlan vlan-id ] [ chassis chassis-number slot slot-number ] [ verbose ]

Views

Any view

Predefined user roles

network-admin

network-operator

mdc-admin

mdc-operator

Parameters

vlan vlan-id: Specifies a VLAN by its VLAN ID in the range of 1 to 4094. If you do not specify a VLAN, this command displays IPv6 PIM snooping neighbor information for all VLANs.

slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command displays IPv6 PIM snooping neighbor information for the MPU. (In standalone mode.)

chassis chassis-number slot slot-number: Specifies a card on an IRF member device or specifies a PEX. The chassis-number argument represents the member ID of the IRF member device or the virtual chassis number of the PEX. The slot-number argument represents the slot number of the card or PEX. If you do not specify a card or PEX, this command displays IPv6 PIM snooping neighbor information for the global active MPU. (In IRF mode.)

verbose: Displays detailed information. If you do not specify this keyword, the command displays brief information.

Examples

# Display detailed IPv6 PIM snooping neighbor information for VLAN 2.

<Sysname> display ipv6 pim-snooping neighbor vlan 2 slot 1 verbose

Total 2 neighbors.

 

VLAN 2: Total 2 neighbors.

  FE80::6401:101

    Slots (0 in total):

    Ports (1 in total):

      GE1/0/1                              (02:02:23)    LAN Prune Delay(T)

  FE80::C801:101

    Slots (0 in total):

    Ports (1 in total):

      GE1/0/2                              (02:02:25)

Table 1 Command output

Field	Description
Total 2 neighbors	Total number of IPv6 PIM snooping neighbors.
VLAN 2: Total 2 neighbors	Total number of IPv6 PIM snooping neighbors in VLAN 2.
FE80::6401:101	IPv6 address of the IPv6 PIM snooping neighbor.
Slots (0 in total)	Slot numbers and total number of the cards that have IPv6 PIM snooping neighbors, except the specified card or the MPU when no card is specified. (In standalone mode.) Chassis numbers, slot numbers, and total number of the cards that have IPv6 PIM snooping neighbors, except the specified card or the MPU when no card is specified. (In IRF mode.)
Ports (1 in total)	Ports where IPv6 PIM snooping neighbors reside, and the total number of the ports.
(02:02:23)	Remaining aging time for an IPv6 PIM snooping neighbor on the port. For a global port (including Layer 2 aggregate interfaces), this field is always displayed. For a non-global port: ·     This field is displayed when the port is on the specified card. (In standalone mode.) ·     This field is displayed when the port is on the specified card of the specified IRF member device. (In IRF mode.)
LAN Prune Delay	PIM hello message sent by the IPv6 PIM snooping neighbor has the LAN_Prune_Delay option.
(T)	The join report suppression feature has been disabled for the IPv6 PIM snooping neighbor.

 

display ipv6 pim-snooping router-port

Use display ipv6 pim-snooping router-port to display IPv6 PIM snooping router port information.

Syntax

In standalone mode:

display ipv6 pim-snooping router-port [ vlan vlan-id ] [ slot slot-number ]

In IRF mode:

display ipv6 pim-snooping router-port [ vlan vlan-id ] [ chassis chassis-number slot slot-number ]

Views

Any view

Predefined user roles

network-admin

network-operator

mdc-admin

mdc-operator

Parameters

vlan vlan-id: Specifies a VLAN by its VLAN ID in the range of 1 to 4094. If you do not specify a VLAN, this command displays IPv6 PIM snooping router port information for all VLANs.

slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command displays IPv6 PIM snooping router port information for the MPU. (In standalone mode.)

chassis chassis-number slot slot-number: Specifies a card on an IRF member device or specifies a PEX. The chassis-number argument represents the member ID of the IRF member device or the virtual chassis number of the PEX. The slot-number argument represents the slot number of the card or PEX. If you do not specify a card or PEX, this command displays IPv6 PIM snooping router port information for the global active MPU. (In IRF mode.)

Examples

# Display IPv6 PIM snooping router port information for VLAN 2.

<Sysname> display ipv6 pim-snooping router-port vlan 2 slot 1

VLAN 2:

  Router slots (0 in total):

  Router ports (2 in total):

    GE1/0/1                              (00:01:30)

    GE1/0/2                              (00:01:32)

Table 2 Command output

Field	Description
VLAN 2	VLAN ID.
Router slots (0 in total)	Slot numbers and total number of the cards that have dynamic router ports, except the specified card or the MPU when no card is specified. (In standalone mode.) Chassis numbers, slot numbers, and total number of the cards that have dynamic router ports, except the specified card or the MPU when no card is specified. (In IRF mode.)
Router ports (2 in total)	Router ports, and the total number of the router ports.
(00:01:30)	Remaining aging time for the router port. For a global port, this field is always displayed. For a non-global port: ·     This field is displayed when the port is on the specified card. (In standalone mode.) ·     This field is displayed when the port is on the specified card of the specified IRF member device. (In IRF mode.)

 

display ipv6 pim-snooping routing-table

Use display ipv6 pim-snooping routing-table to display IPv6 PIM snooping routing entries.

Syntax

In standalone mode:

display ipv6 pim-snooping routing-table [ vlan vlan-id ] [slot slot-number ] [ verbose ]

In IRF mode:

display ipv6 pim-snooping routing-table [ vlan vlan-id ] [ chassis chassis-number slot slot-number ] [ verbose ]

Views

Any view

Predefined user roles

network-admin

network-operator

mdc-admin

mdc-operator

Parameters

vlan vlan-id: Specifies a VLAN by its VLAN ID in the range of 1 to 4094. If you do not specify a VLAN, this command displays information about IPv6 PIM snooping routing entries for all VLANs.

slot slot-number: Specifies a card. The slot-number argument represents the number of the slot that holds the card. If you do not specify a card, this command displays information about IPv6 PIM snooping routing entries for the MPU. (In standalone mode.)

chassis chassis-number slot slot-number: Specifies a card on an IRF member device or specifies a PEX. The chassis-number argument represents the member ID of the IRF member device or the virtual chassis number of the PEX. The slot-number argument represents the slot number of the card or PEX. If you do not specify a card or PEX, this command displays information about IPv6 PIM snooping routing entries for the global active MPU. (In IRF mode.)

verbose: Displays detailed information. If you do not specify this keyword, the command displays brief information.

Examples

# Display detailed information about IPv6 PIM snooping routing entries for VLAN 2.

<Sysname> display ipv6 pim-snooping routing-table vlan 2 verbose

Total 1 entries.

FSM Flag: NI-no info, J-join, PP-prune pending

 

VLAN 2: Total 1 entries.

  (2000::1, FF1E::1)

    FSM information: normal

    Upstream neighbor: FE80::101

      Upstream Slots (0 in total):

      Upstream Ports (1 in total):

        GE1/0/1

      Downstream Slots (0 in total):

      Downstream Ports (2 in total):

        GE1/0/2

          Expires: 00:03:01, FSM: J

          Downstream Neighbors (2 in total):

            1001::1

              Expires: 00:59:19, FSM: J

            1001::2

              Expires: 00:59:20, FSM: J

        GE1/0/3

          Expires: 00:02:21, FSM: PP

Table 3 Command output

Field	Description
Total 1 entries	Total number of (S, G) entries and (*, G) entries.
FSM Flag: NI-no info, J-join, PP-prune pending	State machine flag of the downstream port: ·     NI—Initial state. ·     J—Join. ·     PP—Prune pending.
VLAN 2: Total 1 entries	Total number of (S, G) entries in VLAN 2.
(2000::1, FF1E::1)	(S, G) entry.
FSM information	Finite state machine information of the entry: ·     delete—The entry attributes have been deleted. ·     dummy—The entry is a new temporary entry. ·     no info—The entry does not exist. ·     normal—The entry is a correct entry.
Upstream neighbor	Upstream neighbor of the (S, G) or (*, G) entry.
Upstream Slots (0 in total)	Slot numbers and total number of the cards that have upstream neighbors, except the specified card or the MPU when no card is specified. (In standalone mode.) Chassis numbers, slot numbers, and total number of the cards that have upstream neighbors, except the specified card or the MPU when no card is specified. (In IRF mode.)
Upstream Ports (1 in total)	Upstream ports, and the total number of the ports. ·     This field is displayed when the port is on the specified card. (In standalone mode.) ·     This field is displayed when the port is on the specified card of the specified IRF member device. (In IRF mode.)
Downstream Slots (0 in total)	Slot numbers and total number of the cards that have downstream neighbors, except the specified card or the MPU when no card is specified. (In standalone mode.) Chassis numbers, slot numbers, and total number of the cards that have downstream neighbors, except the specified card or the MPU when no card is specified. (In IRF mode.)
Downstream Ports (2 in total)	Downstream ports of the upstream neighbor, and the total number of the ports.
Downstream Neighbors (2 in total)	Downstream neighbors of the downstream port, and the total number of the neighbors.
Expires: 00:03:01, FSM: J	Remaining aging time for the downstream port or downstream neighbor, and the finite sate machine information. For a global port, this field is always displayed. For a non-global port: ·     This field is displayed when the port is on the specified card. (In standalone mode.) ·     This field is displayed when the port is on the specified card of the specified IRF member device. (In IRF mode..

 

display ipv6 pim-snooping statistics

Use display ipv6 pim-snooping statistics to display statistics for the IPv6 PIM messages learned through IPv6 PIM snooping.

Syntax

display ipv6 pim-snooping statistics

Views

Any view

Predefined user roles

network-admin

network-operator

mdc-admin

mdc-operator

Examples

# Display statistics for the IPv6 PIM messages learned through IPv6 PIM snooping.

<Sysname> display ipv6 pim-snooping statistics

Received IPv6 PIM hello:  100

Received IPv6 PIM join/prune:  100

Received IPv6 PIM error:  0

Received IPv6 PIM messages in total:  200

Table 4 Command output

Field	Description
Received IPv6 PIM hello	Number of received IPv6 PIM hello messages.
Received IPv6 PIM join/prune	Number of received IPv6 PIM join/prune messages.
Received IPv6 PIM error	Number of received IPv6 PIM messages with errors.
Received IPv6 PIM messages in total	Total number of received IPv6 PIM messages.

 

Related commands

reset ipv6 pim-snooping statistics

ipv6 pim-snooping enable

Use ipv6 pim-snooping enable to enable IPv6 PIM snooping for a VLAN.

Use undo ipv6 pim-snooping enable to disable IPv6 PIM snooping for a VLAN.

Syntax

ipv6 pim-snooping enable

undo ipv6 pim-snooping enable

Default

IPv6 PIM snooping is disabled in a VLAN.

Views

VLAN view

Predefined user roles

network-admin

mdc-admin

Usage guidelines

You must enable MLD snooping globally and for a VLAN before you execute this command.

IPv6 PIM snooping does not take effect on sub-VLANs of an IPv6 multicast VLAN.

Examples

# Enable MLD snooping globally, and enable MLD snooping and IPv6 PIM snooping for VLAN 2.

<Sysname> system-view

[Sysname] mld-snooping

[Sysname-mld-snooping] quit

[Sysname] vlan 2

[Sysname-vlan2] mld-snooping enable

[Sysname-vlan2] ipv6 pim-snooping enable

Related commands

·     mld-snooping

·     mld-snooping enable

ipv6 pim-snooping graceful-restart join-aging-time

Use ipv6 pim-snooping graceful-restart join-aging-time to set the aging time for global downstream ports and global router ports on the new active MPU after an active/standby switchover.

Use undo ipv6 pim-snooping graceful-restart join-aging-time to restore the default.

Syntax

ipv6 pim-snooping graceful-restart join-aging-time interval

undo ipv6 pim-snooping graceful-restart join-aging-time

Default

The default setting is 210 seconds.

Views

VLAN view

Predefined user roles

network-admin

mdc-admin

Parameters

interval: Specifies an aging time in the range of 210 to 18000 seconds.

Usage guidelines

A global downstream port or a global router port is a Layer 2 aggregate interface that acts as a downstream port or router port.

You must enable IPv6 PIM snooping for a VLAN before you execute this command.

Examples

# In VLAN 2, set the aging time to 600 seconds for global downstream ports and global router ports on the new active MPU after an active/standby switchover.

<Sysname> system-view

[Sysname] mld-snooping

[Sysname-mld-snooping] quit

[Sysname] vlan 2

[Sysname-vlan2] mld-snooping enable

[Sysname-vlan2] ipv6 pim-snooping enable

[Sysname-vlan2] ipv6 pim-snooping graceful-restart join-aging-time 300

Related commands

ipv6 pim-snooping enable

ipv6 pim-snooping graceful-restart neighbor-aging-time

Use ipv6 pim-snooping graceful-restart neighbor-aging-time to set the aging time for global neighbor ports on the new active MPU after an active/standby switchover.

Use undo ipv6 pim-snooping graceful-restart neighbor-aging-time to restore the default.

Syntax

ipv6 pim-snooping graceful-restart neighbor-aging-time interval

undo ipv6 pim-snooping graceful-restart neighbor-aging-time

Default

The default setting is 105 seconds.

Views

VLAN view

Predefined user roles

network-admin

mdc-admin

Parameters

interval: Specifies an aging time in the range of 105 to 18000 seconds.

Usage guidelines

A global neighbor port is a Layer 2 aggregate interface that acts as a neighbor port.

You must enable IPv6 PIM snooping for a VLAN before you execute this command.

Examples

# In VLAN 2, set the aging time to 300 seconds for global neighbor ports on the new active MPU after an active/standby switchover .

<Sysname> system-view

[Sysname] mld-snooping

[Sysname-mld-snooping] quit

[Sysname] vlan 2

[Sysname-vlan2] mld-snooping enable

[Sysname-vlan2] ipv6 pim-snooping enable

[Sysname-vlan2] ipv6 pim-snooping graceful-restart neighbor-aging-time 300

Related commands

ipv6 pim-snooping enable

reset ipv6 pim-snooping statistics

Use reset ipv6 pim-snooping statistics to clear statistics for the IPv6 PIM messages learned through IPv6 PIM snooping.

Syntax

reset ipv6 pim-snooping statistics

Views

User view

Predefined user roles

network-admin

mdc-admin

Examples

# Clear statistics for the IPv6 PIM messages learned through IPv6 PIM snooping.

<Sysname> reset ipv6 pim-snooping statistics

Related commands

display ipv6 pim-snooping statistics