file-url: Name of the file to be deleted. Asterisks (*) are acceptable as wildcards. For example, to remove files with the expansion of txt, you may use the delete *.txt command.

Description

Use the delete command to remove a specified file from the storage device to the recycle bin, where you can restore the file with the undelete command or permanently delete it with the reset recycle-bin command.

The dir /all command displays the files removed to the recycle bin. These files are enclosed in pairs of brackets.

This command supports the wildcard *.

Caution:

If you delete two files in different directories but with the same filename, only the last one is retained in the recycle bin.

Examples

# Remove the file tt.cfg from the root directory.

<Sysname> delete tt.cfg

Delete flash:/tt.cfg?[Y/N]:y

%Delete file flash:/tt.cfg...Done.

1.1.4 dir

Syntax

dir [ /all | file-url ]

View

User view

Parameters

/all: Displays all files (including those in the recycle bin).

file-url: Name of the file or directory to be displayed. Asterisks (*) are acceptable as wildcards. For example, to display files with the .txt extension under the current directory, you may use the dir *.txt command.

Description

Use the dir command to display information about all visible files and folders in the current directory.

Use the dir /all command to display information about all files and folders on your device, including hidden files, hidden subfiles and those in the recycle bin. The names of these deleted files are enclosed in pairs of brackets ([ ]).

The dir file-url command displays information about a file or folder.

This command supports the wildcard *.

Examples

# Display information about all files and folders.

<Sysname> dir /all

Directory of flash:/

0 -rw- 6985954 Apr 26 2005 21:06:29 mainup.bin

1 -rwh 1842 Apr 27 2005 04:37:17 private-data.txt

2 -rw- 1518 Apr 26 2005 12:05:38 config.cfg

3 -rw- 2045 May 04 2005 15:50:01 backcfg.cfg

4 -rwh 428 Apr 27 2005 16:41:21 hostkey

5 -rwh 572 Apr 27 2005 16:41:31 serverkey

6 -rw- 2737556 Oct 12 2005 01:31:44 [a.app]

14605 KB total (6875 KB free)

[ ] indicates this file is in the recycle bin.

1.1.5 execute

Syntax

execute filename

View

System view

Parameters

filename: Name of a batch file with a .bat extension.

Description

Use the execute command to execute the specified batch file.

Batch files are command line files. Executing a batch file is to execute a set of command lines in the file.

You should not include invisible characters in a batch file. If an invisible character is found during the execution, the batch process will abort and the commands that have been executed cannot be cancelled.

Not every command in a batch file is sure to be executed. For example, if a certain command is not correctly configured, the system omits this command and goes to the next one.

A batch file does not support hot backup.

Each configuration command in a batch file must be a standard configuration command, meaning the valid configuration information which can be displayed with the display current-configuration command after this command is configured successfully; otherwise, this command may not be executed correctly.

Examples

# Execute the batch file test.bat in the root directory.

<Sysname> system-view

[Sysname] execute test.bat

1.1.6 file prompt

Syntax

file prompt { alert | quiet }

View

System view

Parameters

alert: Enables the system to warn you about operations that may bring undesirable results such as file corruption or data loss.

quiet: Disables the system to warn you about any operation.

Description

Use the file prompt command to set a prompt mode for file operations.

By default, the prompt mode is alert.

Note that when the prompt mode is set to quiet, the system does not warn for any file operation. To prevent undesirable consequents resulted from misoperations, the alert mode is preferred.

Examples

# Set the file operation prompt mode to alert.

<Sysname> system-view

[Sysname] file prompt alert

1.1.7 fixdisk

Syntax

fixdisk device

View

User view

Parameters

device: Storage device name.

Description

Use the fixdisk command to restore the space of a storage device when it becomes unavailable because of some abnormal operation.

Examples

# Restore the space of the Flash.

<Sysname> fixdisk flash:

Fixdisk flash: may take some time to complete.

%Fixdisk flash: completed.

1.1.8 format

Syntax

format device

View

User view

Parameters

device: Storage device name.

Description

Use the format command to format a storage device.

Caution:

Formatting a device results in loss of all the files and these files cannot be restored. In particular, if there is startup configuration file on a storage device, formatting the storage device results in loss of the startup configuration file.

Examples

# Format the Flash.

<Sysname> format flash:

All data on flash: will be lost, proceed with format ? [Y/N]:y

%Format flash: completed.

1.1.9 mkdir

Syntax

mkdir directory

View

User view

Parameters

directory: Name of a subdirectory.

Description

Use the mkdir command to create a subdirectory under the specified directory on the storage device.

The name of the subdirectory to be created must be unique under the specified directory.

This command does not allow you to create multiple directory levels at one time. For instance, to create a subdirectory “flash:/test/mytest”, the test directory must have been created.

Examples

# Create a directory named test.

<Sysname> mkdir test

% Created dir flash:/test

# create a subdirectory named mytest under test.

<Sysname>mkdir test/mytest

%Created dir flash:/test/mytest

1.1.10 more

Syntax

more file-url

View

User view

Parameters

file-url: File name.

Description

Use the more command to display the contents of the specified file.

So far, this command is valid only for .txt files.

Examples

# Display the contents of file test.txt.

<Sysname> more test.txt

AppWizard has created this test application for you.

This file contains a summary of what you will find in each of the files that make up your test application.

Test.dsp

This file (the project file) contains information at the project level and is used to build a single project or subproject. Other users can share the project (.dsp) file, but they should export the makefiles locally.

1.1.11 move

Syntax

move fileurl-source fileurl-dest

View

User view

Parameters

fileurl-source: Name of the source file.

fileurl-dest: Name of the target file.

Description

Use the move command to move a file.

Examples

# Move the file flash:/test/sample.txt to flash:/sample.txt.

<Sysname> move flash:/test/sample.txt flash:/sample.txt

Move flash:/test/sample.txt to flash:/sample.txt ?[Y/N]:y

% Moved file flash:/test/sample.txt to flash:/sample.txt

1.1.12 pwd

Syntax

pwd

View

User view

Parameters

None

Description

Use the pwd command to display the current path.

If the current path is not set, the operation will fail.

Examples

# Display the current path.

<Sysname> pwd

flash:

1.1.13 rename

Syntax

rename fileurl-source fileurl-dest

View

User view

Parameters

fileurl-source: Name of the source file or directory.

fileurl-dest: Name of the target file or directory.

Description

Use the rename command to rename a file or directory.

The target file name must be unique under the current path.

Examples

# Rename the file sample.txt as sample.bak.

<Sysname> rename sample.txt sample.bak

Rename flash:/sample.txt to flash:/sample.bak?[Y/N]:y

% Renamed file flash:/sample.txt to flash:/sample.bak

1.1.14 reset recycle-bin

Syntax

reset recycle-bin [ /force ]

View

User view

Parameters

/force: Empties the recycle bin.

Description

Use the reset recycle-bin command to permanently remove deleted file or files from the recycle bin.

Unlike this command, the delete file-url command only moves files to the recycle bin.

Examples

# Empty the recycle bin.

<Sysname> reset recycle-bin

Clear flash:/tt.cfg ?[Y/N]:y

Clearing files from flash may take a long time. Please wait...

%Cleared file flash:/~/tt.cfg.

1.1.15 rmdir

Syntax

rmdir directory

View

User view

Parameters

directory: Name of the directory.

Description

Use the rmdir command to remove a directory.

The directory must be an empty one. If it is not, first delete all files and subdirectory under it with the delete command.

Examples

# Remove directory mydir.

<Sysname> rmdir mydir

Rmdir flash:/mydir?[Y/N]:y

%Removed directory flash:/mydir.

1.1.16 undelete

Syntax

undelete file-url

View

User view

Parameters

filename: Name of the file to be restored.

Description

Use the undelete command to restore a file from the recycle bin.

If another file with the same name exists under the same path, the undelete operation will cause it to be overwritten and the system will ask you whether to continue.

Examples

# Restore file sample.bak from the recycle bin.

<Sysname> undelete sample.bak

Undelete flash:/sample.bak ?[Y/N]:y

% Undeleted file flash:/sample.bak

1.2 Configuration File Management Commands

1.2.1 backup startup-configuration

Syntax

backup startup-configuration to dest-addr [ dest-filename ]

View

User view

Parameters

dest-addr: IP address or name of a TFTP server. The address cannot be an IPv6 address.

dest-filename: Target filename used to save the next startup configuration file on the server.

Description

Use the backup startup-configuration command to backup the startup configuration file (for next startup) using a filename you specify. If you do not specify this filename, the original filename is used.

Execution of this command only backups the main startup configuration file for next startup.

Presently, the device uses TFTP to backup configuration files.

Examples

# Backup the configuration file for next startup on the TFTP server with IP address 2.2..2.2, using the filename config.cfg.

<Sysname> backup startup-configuration to 2.2.2.2 config.cfg

Backup next startup-configuration file to 2.2.2.2, please wait…

finished!

1.2.2 display saved-configuration

Syntax

display saved-configuration [ by-linenum ]

View

Any view

Parameters

by-linenum: Identifies each line of displayed information with a line number.

Description

Use the display saved-configuration command to display the initial configuration file saved in the storage device.

In case the device malfunctions after being powered on, if you find some configurations are not validated or incorrect, you may use this command to identify the problem.

If you do not use the configuration file when the device starts up, meaning the displayed startup configuration file is NULL after you execute the display startup command, no information is displayed when you execute the display saved-configuration command; if you have saved the configuration file after the device starts up, the information last saved in the configuration file is displayed.

Related commands: save, reset saved-configuration, display current-configuration in Basic Configuration Commands in the System Volume.

Examples

# Display the configuration file saved in the storage device.

<Sysname> display saved-configuration

version 5.20, Alpha 2101

sysname Sysname

undo info-center enable

domain default enable system

ipv6

telnet server enable

sflow agent ip 192.168.0.153

sflow collector ip 192.168.0.250

multicast routing-enable

vlan 1

vlan 40

radius scheme system

server-type extended

primary authentication 127.0.0.1 1645

primary accounting 127.0.0.1 1646

user-name-format without-domain

domain system

access-limit disable

state active

idle-cut disable

self-service-url disable

isis 1

network-entity 10.0000.0001.1111.1111.00

interface NULL0

interface Vlan-interface1

ipv6 address 2001:131::3333/64

ip address 192.168.0.153 255.255.255.0

isis enable 1

interface Vlan-interface40

ip address 200.1.1.1 255.255.255.0

interface GigabitEthernet1/0/1

interface GigabitEthernet1/0/2

interface GigabitEthernet1/0/3

interface GigabitEthernet1/0/4

interface GigabitEthernet1/0/5

interface GigabitEthernet1/0/6

interface GigabitEthernet1/0/7

interface GigabitEthernet1/0/8

interface GigabitEthernet1/0/9

port link-type trunk

port trunk permit vlan all

interface GigabitEthernet1/0/10

port link-type trunk

port trunk permit vlan all

interface GigabitEthernet1/0/11

port link-type trunk

port trunk permit vlan all

interface GigabitEthernet1/0/12

port link-type trunk

port trunk permit vlan all

interface GigabitEthernet1/0/13

interface GigabitEthernet1/0/14

interface GigabitEthernet1/0/15

interface GigabitEthernet1/0/16

interface GigabitEthernet1/0/17

interface GigabitEthernet1/0/18

interface GigabitEthernet1/0/19

interface GigabitEthernet1/0/20

interface GigabitEthernet1/0/21

interface GigabitEthernet1/0/22

interface GigabitEthernet1/0/23

interface GigabitEthernet1/0/24

interface GigabitEthernet1/0/25

interface GigabitEthernet1/0/26

interface GigabitEthernet1/0/27

interface GigabitEthernet1/0/28

interface GigabitEthernet1/0/29

interface GigabitEthernet1/0/30

interface GigabitEthernet1/0/31

interface GigabitEthernet1/0/32

interface GigabitEthernet1/0/33

interface GigabitEthernet1/0/34

interface GigabitEthernet1/0/35

interface GigabitEthernet1/0/36

interface GigabitEthernet1/0/37

interface GigabitEthernet1/0/38

interface GigabitEthernet1/0/39

interface GigabitEthernet1/0/40

interface GigabitEthernet1/0/41

interface GigabitEthernet1/0/42

interface GigabitEthernet1/0/43

interface GigabitEthernet1/0/44

interface GigabitEthernet1/0/45

interface GigabitEthernet1/0/46

interface GigabitEthernet1/0/47

interface GigabitEthernet1/0/48

interface GigabitEthernet1/0/49

shutdown

interface GigabitEthernet1/0/50

shutdown

interface GigabitEthernet1/0/51

shutdown

interface GigabitEthernet1/0/52

shutdown

user-interface aux 0

idle-timeout 0 0

user-interface vty 0 4

authentication-mode none

user privilege level 3

return

The configurations are displayed in the order of global, port, and user interface.

1.2.3 display startup

Syntax

display startup

View

Any view

Parameters

None

Description

Use the display startup command to display the configuration file used at this startup and the one used for next startup.

Related commands: startup saved-configuration.

Examples

# Display the configuration file used at this startup and the one used for next startup.

<Sysname> display startup

Current startup saved-configuration file: flash:/testcfgconfig.cfg

Next main startup saved-configuration file: flash:/testcfgconfig.cfg

Next backup startup saved-configuration file: NULL

1.2.4 reset saved-configuration

Syntax

reset saved-configuration [ backup | main ]

View

User view

Parameters

backup: Erases the backup configuration file.

main: Erases the main configuration file.

Description

Use the reset saved-configuration command to erase the configuration file saved in the storage device.

Note that:

l The reset saved-configuration [ main ] command erases the configuration file which has the main attribute only; while for the configuration file which has both the main and backup attributes, the command erases its main attribute.

l The reset saved-configuration backup command erases the configuration file which has the backup attribute only; while for the configuration file which has both the main and backup attributes, the command erases its backup attribute.

Caution:

This command will permanently delete the configuration file on the device. Use it with caution.

Related commands: save, display saved-configuration.

Examples

# Erase the configuration file saved in the storage device.

<Sysname> reset saved-configuration backup

The saved configuration file will be erased.

Are you sure? [Y/N]:y

Configuration file in flashthe device is being cleared.

Please wait .............

Configuration in flashthe device is cleared.

1.2.5 restore startup-configuration

Syntax

restore startup-configuration from src-addr src-filename

View

User view

Parameters

src-addr: IP address or name of a TFTP server. The address cannot be an IPv6 address.

src-filename: Filename of the configuration file to be downloaded from the specified server.

Description

Use the restore startup-configuration command to download the configuration file from the specified TFTP server for the next startup of the device.

If the file to be downloaded has the same filename as an existing file on the device, you will be prompted whether you want to overwrite the existing file or not.

Examples

# Download the configuration file config.cfg for the next startup from the TFTP server whose IP address is .2.2.2.2.

<Sysname>restore startup-configuration from 2.2.2.2 config.cfg

Restore next startup-configuration file from 2.2.2.2. Please wait...finished!

Now restore next startup-configuration file from main to slave board, Please wait...finished!

1.2.6 save

Syntax

save [ file-name | [ safely ] [ backup | main ] ]

View

Any view

Parameters

file-name: File name, whose suffix must be .cfg.

safely: Sets the configuration saving mode to safe. If this argument is not specified, the configuration file is saved in fast mode.

backup: Saves the configuration as the backup configuration file.

main: Saves the configuration as the main configuration file.

Description

Use the save command to save the current configuration to the specified configuration file. If no filename is specified, the system saves the configuration file in an interactive way. In this way, you can use the default path (the configuration file for next startup) or enter a filename to specify a new path, but the suffix of the filename must be “.cfg”.

For a device that supports main/backup configuration file:

l The command saves the current configuration to the main configuration file if the main or backup keyword is not specified.

l If you specified a filename, but the filename does not exist, the system will create this file and save the configuration into this file. The file attribute is neither main nor backup.

l If you specified a filename and this file exists, the system will save the configuration into this file. The file attribute is the original attribute of the file.

In interactive mode, if you use the non-default path (that is, entering a new filename), the system sets the file as the main startup configuration file for next startup.

Related commands: reset saved-configuration, display current-configuration, display saved-configuration.

Examples

# Save the current configuration to the backup configuration file.

<Sysname> save backup

The current configuration will be written to the device.

Are you sure? [Y/N]:y

Please input the file name(*.cfg)[flash:/testcfgtext.cfg](To leave the

existing filename unchanged, press the enter key):

flash:/testcfgbb.cfg exists, overwrite?[Y/N]:y

Validating file. Please wait...

Now saving current configuration to the device.

Saving configuration flash:/testcfgbb.cfg. Please wait...

....

Configuration is saved to flash successfully.

1.2.7 startup saved-configuration

Syntax

startup saved-configuration cfgfile [ backup | main ]

undo startup saved-configuration

View

User view

Parameters

cfgfile: Configuration file name.

backup: Sets the configuration file as backup configuration file.

main: Sets the configuration file as main configuration file.

Description

Use the startup saved-configuration command to specify a configuration file for next startup.

Use the undo startup saved-configuration command to start up with an empty configuration, which means startup with the initial configuration of the system. If the configuration file has main/backup attribute, this command erases the attribute but not deletes the file.

The specified file must be ended with a .cfg extension and saved in the root directory of the storage device.

When the configuration file supports main/backup attribute:

l For a normal configuration file, after the execution of the startup saved-configuration cfgfile main command, the configuration file becomes a main configuration file.

l For a normal configuration file, after the execution of the startup saved-configuration cfgfile backup command, the configuration file becomes a backup configuration file.

l For a main configuration file, after the execution of the startup saved-configuration cfgfile backup command, the configuration file has both main and backup attributes.

l For a backup configuration file, after the execution of the startup saved-configuration cfgfile main command, the configuration file has both main and backup attributes.

l If main/backup attribute is not specified, the file is set as a main configuration file.

l If a main configuration file already exists when you set a new file as the main configuration file, the main attribute of the existing file will be erased to allow only one main configuration file in the system.

l If a backup configuration file already exists when you set a new file as the backup configuration file, the backup attribute of the existing file will be erased to allow only one backup configuration file in the system.

Related commands: display startup.

Examples

# Specify a backup configuration file for next startup.

<Sysname> startup saved-configuration testcfg.cfg backup

Please wait ...... Done!

Chapter 2 FTP Configuration Commands

2.1 FTP Server Configuration Commands

2.1.1 display ftp-server

Syntax

display ftp-server

View

Any view

Parameters

None

Description

Use the display ftp-server command to display the FTP server configuration of the device.

After configuring FTP parameters, you may verify them with this command.

Related commands: ftp timeout, ftp update.

Examples

# Display the FTP server configuration.

<Sysname> display ftp-server

FTP server is running

Max user number: 1

User count: 1

Timeout value(in minute): 30

Put Method: fast

The output indicates that the FTP server is running with support to only one concurrent login user; now one logged-in user is present; timeout of the user is 30 minutes, and FTP update mode is fast.

2.1.2 display ftp-user

Syntax

display ftp-user

View

Any view

Parameters

None

Description

Use the display ftp-user command to display the detailed information of current FTP users.

Examples

# Display the detailed information of FTP users.

<Sysname> display ftp-user

UserName HostIP Port Idle HomeDir

ftp 192.168.1.54 1190 0 flash:

Table 2-1 Description on the fields of the display ftp-user command

Field	Description
UserName	Name of the present logged-in user
HostIP	IP address of the present logged-in user
Port	Port which the present logged-in user is using
Idle	Duration time of the current FTP connection
HomeDir	Specified path of the present logged-in user

2.1.3 free ftp user

Syntax

free ftp user username

View

User view

Parameters

username: Username used when the FTP connection to be released is established.

Description

Use the free ftp user command to manually release the FTP connection established with the specified username.

Note that if the user to be released is transmitting a file, the connection between the user and the FTP server is terminated after the file transmission.

Examples

# Manually release the FTP connection established with username of ftpuser.

<Sysname> free ftp user ftpuser

Are you sure to free FTP user ftpuser? [Y/N]:y

2.1.4 ftp server enable

Syntax

ftp server enable

undo ftp server

View

System view

Parameters

None

Description

Use the ftp server enable command to enable the FTP server.

Use the undo ftp server command to disable the FTP server.

By default, the FTP server is disabled to prevent attacks.

Examples

# Disable the FTP server.

<Sysname> system-view

[Sysname] undo ftp server

% Close FTP server

2.1.5 ftp timeout

Syntax

ftp timeout minute

undo ftp timeout

View

System view

Parameters

minute: Idle-timeout timer in minutes, in the range 1 to 35791. The default is 30 minutes.

Description

Use the ftp timeout command to set the idle-timeout timer.

Use the undo ftp timeout command to restore the default.

After you log onto the FTP server, you set up an FTP connection. When the connection is disrupted, the FTP server, if not notified, cannot realize that and maintains the connection all the same. To address this problem, you can set an idle-timeout timer to have the FTP server disconnected if no information is received or/and transmitted before the timer expires.

Examples

# Set the idle-timeout timer to 36 minutes.

<Sysname> system-view

[Sysname] ftp timeout 36

2.1.6 ftp update

Syntax

ftp update { fast | normal }

undo ftp update

View

System view

Parameters

fast: Fast update.

normal: Normal update.

Description

Use the ftp update command to set the file update mode that the FTP server uses while receiving data.

Use the undo ftp update command to restore the default, namely, the normal mode.

Examples

# Set the FTP update mode to normal.

<Sysname> system-view

[Sysname] ftp update normal

2.2 FTP Client Configuration Commands

& Note:

You must use the ftp command to enter FTP client view for configurations under this view. For details, refer to ftp.

2.2.1 ascii

Syntax

ascii

View

FTP client view

Parameters

None

Description

Use the ascii command to set the file transfer mode to ASCII for the FTP connection.

FTP provides two file transfer modes: ASCII and binary. To transfer text files, use the ASCII mode; to transfer program files, use the binary mode.

By default, the file transfer mode is ASCII.

Examples

# Set the file transfer mode to ASCII.

[ftp] ascii

200 Type set to A.

2.2.2 binary

Syntax

binary

View

FTP client view

Parameters

None

Description

Use the binary command to set the file transfer mode to binary (also called flow mode).

FTP provides two file transfer modes: ASCII and binary. To transfer text files, use the ASCII mode; to transfer program files, use the binary mode.

By default, the transfer mode is ASCII mode.

Examples

# Set the file transfer mode to binary.

[ftp] binary

200 Type set to I.

2.2.3 bye

Syntax

bye

View

FTP client view

Parameters

None

Description

Use the bye command to disconnect from the remote FTP server and exit to user view.

Examples

# Terminate the connection with the remote FTP server and exit to user view.

[ftp] bye

221 Server closing.

2.2.4 cd

Syntax

cd pathname

View

FTP client view

Parameters

pathname: Path name.

Description

Use the cd command to change the current working directory on the remote FTP server.

You can use this command to access another authorized directory on the FTP server.

Examples

# Change the current working directory to flash:/logfile.

[ftp] cd flash:/logfile

250 CWD command successful.

2.2.5 cdup

Syntax

cdup

View

FTP client view

Parameters

None

Description

Use the cdup command to exit the current directory and enter the upper directory of the FTP server.

Examples

# Change the current working directory path to the upper directory.

[ftp] cdup

200 CDUP command successful.

2.2.6 close

Syntax

close

View

FTP client view

Parameters

None

Description

Use the close command to terminate the connection to the FTP server, but remain in FTP client view.

This command is equal to the disconnect command.

Examples

# Terminate the connection to the FTP server and remain in FTP client view.

[ftp] close

221 Server closing.

[ftp]

2.2.7 debugging

Syntax

debugging

undo debugging

View

FTP client view

Parameters

None

Description

Use the debugging command to enable FTP client debugging.

Use the undo debugging command to disable FTP client debugging.

By default, FTP client debugging is disabled.

Examples

# The device serves as the FTP client. Enable FTP client debugging and use the active mode to download file sample.file from the current directory of the FTP server.

<Sysname> terminal monitor

<Sysname> terminal debugging

<Sysname> ftp 192.168.1.46

Trying 192.168.1.46 ...

Press CTRL+K to abort

Connected to 192.168.1.46.

220 FTP service ready.

User(192.168.1.46:(none)):ftp

331 Password required for ftp.

Password:

230 User logged in.

[ftp]undo passive

[ftp] debugging

[ftp] get sample.file

---> PORT 192,168,1,44,4,21

200 Port command okay.

The parsed reply is 200

---> RETR sample.file

150 Opening ASCII mode data connection for sample.file.

The parsed reply is 150

FTPC: File transfer started with the signal light turned on.

FTPC: File transfer completed with the signal light turned off.

.226 Transfer complete.

FTP: 3304 byte(s) received in 4.889 second(s), 675.00 byte(s)/sec.

[ftp]

Table 2-2 Description on the fields of the debugging command

Field	Description
---> PORT	Give an FTP order, with data port numbers being…
The parsed reply is	The received reply code, which is defined in RFC 959.
---> RETR	Download the file
FTPC: File transfer started with the signal light turned on.	File transfer starts, and the signal light is turned on.
FTPC: File transfer completed with the signal light turned off.	File transfer is completed, and the signal light is turned off.

2.2.8 delete

Syntax

delete remotefile

View

FTP client view

Parameters

remotefile: File name.

Description

Use the delete command to delete a specified file on the remote FTP server.

To do this, you must be a user with the delete permission on the FTP server.

Examples

# Delete file temp.c.

[ftp] delete temp.c

250 DELE command successful.

2.2.9 dir

Syntax

dir [ remotefile [ localfile ] ]

View

FTP client view

Parameters

remotefile: Name of the file or directory on the remote FTP server.

localfile: Name of the local file to save the displayed information.

Description

Use the dir command to view detailed information of the files and subdirectories under the current directory on the remote FTP server.

Use the dir remotefile command to display the detailed information of the specified file or directory on the remote FTP server.

Use the dir remotefile localfile command to display the detailed information of the specified file or directory on the remote FTP server, and save the displayed information into a local file specified by the localfile argument.

& Note:

The Is command can only display the names of files and directories, whereas the dir command can display other related information of the files and directories, such as the size, the date they were created.

Examples

# View the information of the file ar-router.cfg, and save the result to aa.txt.

[ftp] dir ar-router.cfg aa.txt

227 Entering Passive Mode (192,168,1,50,17,158).

125 ASCII mode data connection already open, transfer starting for ar-router.cfg.

....226 Transfer complete.

FTP: 67 byte(s) received in 4.600 second(s), 14.00 byte(s)/sec.

# View the content of aa.txt

[ftp] quit

<Sysname> more aa.txt

-rwxrwxrwx 1 noone nogroup 3077 Jun 20 15:34 ar-router.cfg

2.2.10 disconnect

Syntax

disconnect

View

FTP client view

Parameters

None

Description

Use the disconnect command to disconnect from the remote FTP server but remain in FTP client view.

This command is equal to the close command.

Examples

# Disconnect from the remote FTP server but remain in FTP client view.

[ftp] disconnect

221 Server closing.

2.2.11 display ftp client configuration

Syntax

display ftp client configuration

View

Any view

Parameters

None

Description

Use the display ftp client configuration command to display the configuration information of the FTP client.

& Note:

Currently this command displays the configuration information of the source address. If the currently valid source address is the source IP address, this command displays the configured source IP address; if it is the source interface, this command displays the configured source interface.

Related commands: ftp client source.

Examples

# Display the current configuration information of the FTP client.

<Sysname> display ftp client configuration

The source IP address is 192.168.0.123

2.2.12 ftp

Syntax

ftp [ server-address [ service-port ] [ source { interface interface-type interface-number | ip source-ip-address } ] ]

View

User view

Parameters

server-address: IP address or host name of a remote FTP server.

service-port: Port number of the remote FTP server, in the range 0 to 65535. The default value is 21.

interface interface-type interface-number: Specifies the source interface by its type and number. The primary IP address configured on this interface is the source address of the transmitted packets. If no primary IP address is configured on the source interface, the connection fails.

ip source-ip-address: The source IP address of the current FTP client. This source address must be the one that has been configured on the device.

Description

Use the ftp command to log onto the remote FTP server and enter FTP client view.

Note that:

l This command applies to IPv4 network.

l If you use this command without specifying any parameters, you will simply enter the FTP client view without logging onto the FTP server.

l If you specify the parameter, you will be asked to enter the username and password for accessing the FTP server.

l The priority of the source address specified with this command is higher than that with the ftp client source command. If you specify the source address with the ftp client source command first and then with the ftp command, the source address specified with the ftp command is used to communicate with the FTP server.

Related commands: ftp client source.

Examples

# Log from the current device Sysname1 onto the device Sysname2 with the IP address of 192.168.0.211. The source IP address of the packets sent is 192.168.0.212.

<Sysname1> ftp 192.168.0.211 source ip 192.168.0.212

Trying 192.168.0.211 ...

Press CTRL+K to abort

Connected to 192.168.0.211.

220 FTP Server ready

User(192.168.0.211:(none)):abc

331 Password required for abc

Password:

230 Login OK

[ftp]

2.2.13 ftp client source

Syntax

ftp client source { interface interface-type interface-number | ip source-ip-address }

undo ftp client source

View

System view

Parameters

interface interface-type interface-number: Source interface for the FTP connection, including interface type and interface number. The primary IP address configured on the source interface is the source IP address of the packets sent by FTP. If no primary IP address is configured on the source interface, the connection fails.

ip source-ip-address: Source IP address of the FTP connection. It must be an IP address that has been configured on the device.

Description

Use the ftp client source command to configure the source address of the transmitted FTP packets from the FTP client.

Use the undo ftp client source command to restore the default.

By default, a device uses the IP address of the interface determined by the routing protocol as the source IP address to communicate with an FTP server.

Note that:

l The source address includes the source interface and the source IP address. If you use the ftp client source command to specify the source interface and the source IP address, the newly specified source IP address overwrites the original one and vice versa.

l If the source address is specified with the ftp client source command and then with the ftp command, the source address specified with the latter one is used to communicate with the FTP server.

l The source address specified with the ftp client source command is valid for all ftp connections and the source address specified with the ftp command is valid only for the current ftp connection.

Related commands: display ftp client configuration.

Examples

# Specify the source IP address of the FTP client as 2.2.2.2.

<Sysname> system-view

[Sysname] ftp client source ip 2.2.2.2

# Specify the source interface of the FTP client as VLAN-interface 1.

<Sysname> system-view

[Sysname] ftp client source interface Vlan-interface 1

2.2.14 ftp ipv6

Syntax

ftp ipv6 [ server-address [ service-port ] [ source ipv6 source-ipv6-address ] [ -i interface-type interface-number ] ]

View

User view

Parameters

server-address: IP address or host name of the remote FTP server.

service-port: Port number of the FTP server, in the range 0 to 65535. The default value is 21.

source ipv6 source-ipv6-address: Specifies a source IPv6 address for transmitted FTP packets. This address must be an IPv6 address that has been configured on the device.

-i interface-type interface-number: Specifies the type and number of the egress interface. This parameter can be used only in case that the FTP server address is the link local address and the specified egress interface must have a link local address (For the configuration of link local address, see the IPv6 Configuration part of the manual.

Description

Use the ftp ipv6 command to log onto the FTP server and enter FTP client view.

Note that:

l This command applies to IPv6 network.

l If you use this command without specifying any parameters, you will simply enter the FTP client view without logging onto the FTP server.

l If you specify the parameter, you will be asked to enter the username and password for accessing the FTP server.

Examples

# Log onto the FTP server with IPv6 address 3000::200.

<Sysname> ftp ipv6 3000::200

Trying 3000::200 ...

Press CTRL+K to abort

Connected to 3000::200.

220 Welcome!

User(3000::200:(none)): MY_NAME

331 Please specify the password.

Password:

230 Login successful.

[ftp]

2.2.15 get

Syntax

get remotefile [ localfile ]

View

FTP client view

Parameters

remotefile: File name on the remote FTP server.

localfile: Local file name.

Description

Use the get command to download a file from a remote FTP server and save it.

If no name is specified, the local file uses the name of the source file on the FTP server by default.

Examples

# Download file testcfg.cfg and save it as aa.cfg.

[ftp]get testcfg.cfg aa.cfg

227 Entering Passive Mode (192,168,1,50,17,163).

125 ASCII mode data connection already open, transfer starting for testcfg.cfg.

.....226 Transfer complete.

FTP: 5190 byte(s) received in 7.754 second(s), 669.00 byte(s)/sec.

2.2.16 lcd

Syntax

lcd

View

FTP client view

Parameters

None

Description

Use the lcd command to display the local directory of the FTP client.

Examples

# Display the local directory.

[ftp] lcd

FTP: Local directory now flash:/temp

2.2.17 ls

Syntax

ls [ remotefile ] [ localfile ] ]

View

FTP client view

Parameters

remotefile: Filename or directory on the remote FTP server.

localfile: Name of a local file used to save the displayed information.

Description

Use the ls command to view the information of all the files and subdirectories under the current directory of the remote FTP server. The file names and subdirectory names are displayed.

Use the ls remotefile command to view the information of a specified file or subdirectory.

Use the ls remotefile localfile command view the information of a specified file or subdirectory, and save the result to a local file specified by the localfile argument.

& Note:

Examples

# View the information of all files and subdirectories under the current directory of the FTP server.

[ftp] ls

227 Entering Passive Mode (192,168,1,50,17,165).

125 ASCII mode data connection already open, transfer starting for *.

ar-router.cfg

logfile

mainar.bin

arbasicbtm.bin

ftp

test

bb.cfg

testcfg.cfg

226 Transfer complete.

FTP: 87 byte(s) received in 0.132 second(s) 659.00 byte(s)/sec.

# View the information of directory logfile, and save the result to file aa.txt.

[ftp] ls logfile aa.txt

227 Entering Passive Mode (192,168,1,50,17,166).

125 ASCII mode data connection already open, transfer starting for logfile.

.....226 Transfer complete.

FTP: 9 byte(s) received in 0.094 second(s) 95.00 byte(s)/sec.

# View the content of file aa.txt.

[ftp] quit

<Sysname> more aa.txt

logfile

2.2.18 mkdir

Syntax

mkdir directory

View

FTP client view

Parameters

directory: Directory name.

Description

Use the mkdir command to create a subdirectory under the specified directory on the remote FTP server.

To do this, you must be a user with the permission on the FTP server.

Examples

# Create subdirectory mytest on the current directory of the remote FTP server.

[ftp] mkdir mytest

257 " flash:/mytest" new directory created.

2.2.19 open

Syntax

open server-address [ service-port ]

View

FTP client view

Parameters

server-address: IP address or host name of a remote FTP server.

service-port: Port number of the remote FTP server, in the range 0 to 65535, with the default value of 21.

Description

Use the open command to log onto the IPv4 FTP server under FTP client view.

At login, you will be asked to enter the username and password for accessing the FTP server. If your input is correct, the login succeeds; otherwise, it fails.

Related commands: close.

Examples

# In FTP client view, log onto the FTP server with the IP address of 192.168.1.50.

<Sysname> ftp

[ftp] open 192.168.1.50

Trying 192.168.1.50 ...

Press CTRL+K to abort

Connected to 192.168.1.50.

220 FTP service ready.

User(192.168.1.50:(none)):aa

331 Password required for aa.

Password:

230 User logged in.

[ftp]

2.2.20 open ipv6

Syntax

open ipv6 server-address [ service-port ] [ -i interface-type interface-number ]

View

FTP client view

Parameters

server-address: IP address or host name of the remote FTP server.

service-port: Port number of the remote FTP server, in the range 0 to 65535. The default value is 21.

-i interface-type interface-number: Specifies the egress interface by it type and number. This parameter can be used only in case that the FTP server address is the link local address and the specified egress interface must have a link local address (For the configuration of link local address, see the IPv6 Configuration part of the manual.

Description

Use the open ipv6 command to log onto IPv6 FTP server in FTP client view.

At login, you will be asked to enter the username and password for accessing the FTP server. If your input is correct, the login succeeds; otherwise, it fails.

Related commands: close.

Examples

# Log onto the FTP server (with IPv6 address 3000::200) in FTP client view.

<Sysname> ftp

[ftp] open ipv6 3000::200

Trying 3000::200 ...

Press CTRL+K to abort

Connected to 3000::200.

220 Welcome!

User(3000::200:(none)): MY_NAME

331 Please specify the password.

Password:

230 Login successful.

2.2.21 passive

Syntax

passive

undo passive

View

FTP client view

Parameters

None

Description

Use the passive command to set the data transmission mode to passive.

Use the undo passive command to set the data transmission mode to active.

The default transmission mode is passive.

Examples

# Set the data transmission mode to passive.

[ftp] passive

FTP: passive is on

2.2.22 put

Syntax

put localfile [ remotefile ]

View

FTP client view

Parameters

localfile: Local file name.

remotefile: Name of the file to be saved on the remote FTP server.

Description

Use the put command to upload a file to the remote FTP server.

If no name is assigned to the file to be saved on the FTP server, the name of the source file is used by default.

Examples

# Upload source file cc.txt to the remote FTP server and save it as dd.txt.

[ftp] put cc.txt dd.txt

227 Entering Passive Mode (192,168,1,50,17,169).

125 ASCII mode data connection already open, transfer starting for dd.txt.

226 Transfer complete.

FTP: 9 byte(s) sent in 0.112 second(s), 80.00byte(s)/sec.

2.2.23 pwd

Syntax

pwd

View

FTP client view

Parameters

None

Description

Use the pwd command to display the working directory on the remote FTP server.

Examples

# Display the working directory on the remote FTP server.

[ftp] pwd

257 "flash:/temp" is current directory.

2.2.24 quit

Syntax

quit

View

FTP client view

Parameters

None

Description

Use the quit command to disconnect from the remote FTP server and exit to user view.

Examples

# Disconnect from the remote FTP server and exit to user view.

[ftp] quit

221 Server closing.

2.2.25 remotehelp

Syntax

remotehelp [ protocol-command ]

View

FTP client view

Parameters

protocol-command: FTP command.

Description

Use the remotehelp command to display the help information of FTP-related commands supported by the remote FTP server.

If no parameter is specified, FTP-related commands supported by the remote FTP server are displayed.

Examples

# Display FTP commands supported by the remote FTP server.

[ftp] remotehelp

214-Here is a list of available ftp commands

Those with '*' are not yet implemented.

USER PASS ACCT* CWD CDUP SMNT* QUIT REIN*

PORT PASV TYPE STRU* MODE* RETR STOR STOU*

APPE* ALLO* REST* RNFR* RNTO* ABOR* DELE RMD

MKD PWD LIST NLST SITE* SYST STAT* HELP

NOOP* XCUP XCWD XMKD XPWD XRMD

214 Direct comments to H3C company.

# Display the help information for the user command.

[ftp] remotehelp user

214 Syntax: USER <sp> <username>.

[ftp]

Table 2-3 Description on the fields of the remotehelp command

Field	Description
214-Here is a list of available ftp commands	The following is an available FTP command list.
Those with '*' are not yet implemented.	Those commands with “*” are not yet implemented.
USER	Username
PASS	Password
CWD	Change the current working directory
CDUP	Change to parent directory
SMNT*	File structure setting
QUIT	Quit
REIN*	Re-initialization
PORT	Port number
PASV	Passive mode
TYPE	Request type
STRU*	File structure
MODE*	Transmission mode
RETR	Download a file
STOR	Upload a file
STOU*	Store unique
APPE*	Appended file
ALLO*	Allocation space
REST*	Restart
RNFR*	Rename the source
RNTO*	Rename the destination
ABOR*	Abort the transmission
DELE	Delete a file
RMD	Delete a folder
MKD	Create a folder
PWD	Print working directory
LIST	List files
NLST	List file description
SITE*	Orient a parameter
SYST	Display system parameters
STAT*	State
HELP	Help
NOOP*	No operation
XCUP	Extension command, the same meaning as CUP
XCWD	Extension command, the same meaning as CWD
XMKD	Extension command, the same meaning as MKD
XPWD	Extension command, the same meaning as PWD
XRMD	Extension command, the same meaning as RMD
Syntax: USER <sp> <username>.	Syntax of the user command: user (keyword) + space + username

2.2.26 rmdir

Syntax

rmdir directory

View

FTP client view

Parameters

directory: Directory name on the remote FTP server.

Description

Use the rmdir command to remove a specified directory from the FTP server.

Note that only authorized users are allowed to use this command.

Note that:

l The directory to be deleted must be empty, meaning you should delete all files and the subdirectory under the directory before you delete a directory. For the deletion of files, refer to the delete command.

l After you execute the rmdir command, the files in the remote recycle bin under the directory will be automatically deleted.

Examples

# Delete the flash:/temp1 directory from the FTP server.

[ftp] rmdir flash:/temp1

200 RMD command successful.

2.2.27 user

Syntax

user username [ password ]

View

FTP client view

Parameters

username: Other login username.

password: Login password.

Description

Use the user command to relog onto the currently accessing FTP server with other username after you have logged onto the FTP server.

Before using this command, you must configure the corresponding username and password on the FTP server; otherwise, you login fails and the FTP connection is closed.

Examples

# User ftp1 has logged onto the FTP server and relogs onto the current FTP server with the username of ftp2. (Suppose username ftp2 and password 123123123123 have been configured on the FTP server).

[ftp] user ftp2

331 Password required for ftp2.

Password:

230 User logged in.

[ftp]

2.2.28 verbose

Syntax

verbose

undo verbose

View

FTP client view

Parameters

None

Description

Use the verbose command to enable the verbose function to display detailed prompt information.

Use the undo verbose command to disable the verbose function.

By default, the verbose function is enabled.

Examples

# Enable the verbose function.

[ftp] verbose

FTP: verbose is on

Chapter 3 TFTP Configuration Commands

3.1 TFTP Client Configuration Commands

3.1.1 display tftp client configuration

Syntax

display tftp client configuration

View

Any view

Parameters

None

Description

Use the display tftp client configuration command to display the configuration information of the TFTP client.

Related commands: tftp client source.

Examples

# Display the current configuration information of the TFTP client.

<Sysname> display tftp client configuration

The source IP address is 192.168.0.123

& Note:

Currently this command displays the source address configuration information. If the currently valid source address is the source IP address, the configured source IP address is displayed; if the currently valid address is the source interface, the configured source interface is displayed.

3.1.2 tftp-server acl

Syntax

tftp-server [ ipv6 ] acl acl-number

undo tftp-server [ ipv6 ] acl

View

System view

Parameters

ipv6: References an IPv6 ACL. If it is not specified, an IPv4 ACL is referenced.

acl-number: Number of basic ACL, in the range 2000 to 2999.

Description

Use the tftp-server acl command to reference an ACL to control access to the TFTP server. Users can use the configured rules in ACL to allow or prevent the use of TFTP server in a network.

Use the undo tftp-server acl command to remove the access restriction.

For more information about ACL, refer to the ACL Configuration part of the manual.

Examples

# Reference ACL 2000 to control access to the TFTP application in IPv4.

<Sysname> system-view

[Sysname] acl number 2000

[Sysname-acl-basic-2000] rule permit source 1.1.1.1 0

[Sysname-acl-basic-2000] quit

[Sysname] tftp-server acl 2000

# Associate IPv6 ACL 2001 with TFTP application in Ipv6.

<Sysname> system-view

[Sysname] acl ipv6 number 2001

[Sysname-acl6-basic-2001] rule permit source 2030:5060::9050/64

[Sysname-acl6-basic-2001] quit

[Sysname] tftp-server ipv6 acl 2001

3.1.3 tftp

Syntax

tftp server-address { get | put | sget } source-filename [ destination-filename ] [ source { interface interface-type interface-number | ip source-ip-address } ]

View

User view

Parameters

server-address: IP address or host name of a TFTP server.

source-filename: Source file name.

destination-filename: Destination file name.

get: Downloads a file in normal mode.

put: Uploads a file.

sget: Downloads a file in secure mode.

source: Configures parameters for source address binding.

l interface interface-type interface-number: Specifies the source interface by its type and number. The primary IP address configured on the source interface is the source IP address of the packets sent by TFTP. If no primary IP address is configured on the source interface, the transmission fails.

l ip source-ip-address: Specifies the source IP address for the current TFTP client to transmit packets. This source address must be the one that has been configured on the device.

Description

Use the tftp command to upload files from the local device to a TFTP server or download files from the TFTP server to the local device.

l If no destination file name is specified, the saved file uses the source file name.

l The priority of the source address specified with this command is higher than that with the tftp client source command. If you use the tftp client source command to specify the source address first and then with the tftp command, the latter one is adopted.

This command applies to IPv4 network.

Related commands: tftp client source.

Examples

# Download the config.cfg file from the TFTP server with the IP address of 192.168.0.98 and save it as config.bak. Specify the source IP address to be 192.168.0.92.

<Sysname> tftp 192.168.0.98 get config.cfg config.bak source ip 192.168.0.92

File will be transferred in binary mode

Downloading file from remote tftp server, please wait...\

TFTP: 2143 bytes received in 0 second(s)

File downloaded successfully.

# Upload the config.cfg file from the storage device to the default path of the TFTP server with the IP address of 192.168.0.98 and save it as config.bak. Specify the source IP interface to be VLAN-interface 1.

<Sysname> tftp 192.168.0.98 put config.cfg config.bak source interface vlan-interface 1

File will be transferred in binary mode

Sending file to remote tftp server. Please wait... \

TFTP: 2143 bytes sent in 0 second(s).

File uploaded successfully.

3.1.4 tftp client source

Syntax

tftp client source { interface interface-type interface-number | ip source-ip-address }

undo tftp client source

View

System view

Parameters

interface interface-type interface-number: Specifies the source interface by its type and number. The primary IP address configured on the source interface is the source IP address of the packets sent by FTP. If no primary IP address is configured on the source interface, the transmission fails.

ip source-ip-address: The source IP address of the TFTP connection. It must be an IP address that has been configured on the device.

Description

Use the tftp client source command to configure the source address of the TFTP packets from the TFTP client.

Use the undo telnet client source command to restore the default.

By default, a device uses the IP address of the interface determined by the routing protocol as the source IP address to communicate with a TFTP server.

Note that:

l The source address includes the source interface and the source IP, if you use the tftp client source command to specify the source interface and the source IP, the newly specified source IP overwrites the original one and vice versa.

l If the source address is specified with the tftp client source command and then with the tftp command, use the latter one.

l The source address specified with the tftp client source command is valid for all tftp connections and the source address specified with the tftp command is valid for the current tftp command.

Related commands: display tftp client configuration.

Examples

# Specify the source IP address of the TFTP client to 2.2.2.2.

<Sysname> system-view

[Sysname] tftp client source ip 2.2.2.2

# Specify the source interface of the TFTP client to be VLAN-interface 1.

<Sysname> system-view

[Sysname] ftp client source interface vlan-interface 1

3.1.5 tftp ipv6

Syntax

tftp ipv6 tftp-ipv6-server [ -i interface-type interface-number ] { get | put } source-file [ destination-file ]

View

User view

Parameters

tftp-ipv6-server: IPv6 address or host name (a string of 1 to 46 characters) of a TFTP server.

-i interface-type interface-number: Specifies the egress interface by its type and number. This parameter can be used only in case that the TFTP server address is a link local address and the specified egress interface must have a link local address (For the configuration of link local address, see the IPv6 Configuration part of the manual.

get: Downloads a file.

put: Uploads a file.

source-filename: Source filename.

destination-filename: Destination filename. If not specified, this filename is the same as the source filename.

Description

Use the tftp ipv6 command to download a specified file from a TFTP server or upload a specified local file to a TFTP server.

This command applies to IPv6 network.

Examples

# Download filetoget.txt from TFTP server.

<Sysname> tftp ipv6 fe80::250:daff:fe91:e058 -i vlan-interface 1 get filetoget. txt

File will be transferred in binary mode

Downloading file from remote tftp server, please wait...

TFTP: 32 bytes received in 5 second(s).

File downloaded successfully

H3C S5500-EI Series Switches Command Manual-Release 2102(V1.01)

1.1.1 cd

1.1.2 copy

1.1.3 delete

1.1.4 dir

1.1.5 execute

1.1.8 format

1.1.9 mkdir

1.1.10 more

1.1.11 move

1.1.14 reset recycle-bin

1.1.16 undelete

1.2.1 backup startup-configuration

1.2.2 display saved-configuration

1.2.3 display startup

1.2.4 reset saved-configuration

1.2.5 restore startup-configuration

1.2.7 startup saved-configuration

Chapter 2 FTP Configuration Commands

2.1.3 free ftp user

2.1.5 ftp timeout

2.1.6 ftp update

2.2 FTP Client Configuration Commands

2.2.2 binary

2.2.3 bye

2.2.6 close

2.2.7 debugging

2.2.10 disconnect

2.2.11 display ftp client configuration

2.2.15 get

2.2.20 open ipv6

2.2.26 rmdir

Chapter 3 TFTP Configuration Commands

3.1.1 display tftp client configuration

3.1.3 tftp

3.1.4 tftp client source

Cloud & AI

InterConnect

Intelligent Terminal Products

Product Support Services

Technical Service Solutions

Resource Center

Policy

Online Help

Become a Partner

Partner Resources

Partner Business Management

Company Information

News & Events

Contact Us