LSQM1TGT24FD0 Card Manual-6PW101

HomeSupportResource CenterSwitchesH3C S7500E Switch SeriesH3C S7500E Switch SeriesTechnical DocumentsInstall & UpgradeService Module Card ManualsLSQM1TGT24FD0 Card Manual-6PW101
Download Book
Title Size Downloads
LSQM1TGT24FD0 Card Manual-6PW101-book.pdf 24.77 KB

LSQM1TGT24FD0 10GE copper interface module

1  Identifier

The module identifier LSQM1TGT24FD0 is in the upper right corner of the front panel.

2  Specifications

Table 1 Module specifications

Item

Specifications

Dimensions (H × W × D)

40 × 399 × 355 mm (1.57 × 15.71 × 13.98 in)

SDRAM (DDR4)

2 GB

Power consumption

60 W to 112 W

Connector type

RJ-45

Ports

24

Port rate

·         100 Mbps

·         1000 Mbps

·         2.5 Gbps

·         5 Gbps

·         10 Gbps

Available cables

·         100M/1000M/2.5G copper port: Category 5e or higher twisted pair cables

·         5G copper port: Category 6 or higher twisted pair cables

·         10G copper port: Category 6a or higher twisted pair cables

Transmission medium and max transmission distance

100 m (328.08 ft)

 

 

NOTE:

To verify the compatibility of the card with the software release you are using, see the release notes.

 

The 100M/1000M/2.5G/5G/10G copper port uses an RJ-45 connector.

Figure 1 RJ-45 connector

 

Table 2 RJ-45 connector pin assignment

Pin

10G/5G/2.5G/1000/100BASE-T

Signal

Function

1

MX_0+

Transmits and receives data

2

MX_0-

Transmits and receives data

3

MX_1+

Transmits and receives data

4

MX_2+

Transmits and receives data

5

MX_2-

Transmits and receives data

6

MX_1-

Transmits and receives data

7

MX_3+

Transmits and receives data

8

MX_3-

Transmits and receives data

 

3  Related documentation

For module installation, see the installation guide for the device.

For software upgrade, see the release notes for the device.

 

 

Copyright © 2018-2019 New H3C Technologies Co., Ltd.

The information in this document is subject to change without notice.

Contact Sales