Login
| Title | Size | Downloads |
|---|---|---|
| About the H3C SR6600 Command References-book(CHM).rar | 3.06 MB |
- Table of Contents
About the H3C SR6600 Command References
The H3C SR6600 command references are part of the H3C SR6600 Routers documentation set. They describe the commands and command syntax options available for the H3C SR6600 Routers. The H3C SR6600 documentation set includes 13 command references:
Command Reference | Content |
Covers the commands for logging in to and setting up an SR6600 Router. This command reference includes: l CLI l Logging In to the Switch l FTP and TFTP l File Management l Configuration File Management l Software Upgrade l Device Management | |
Covers the interface configuration commands. This command reference includes: l Ethernet Interface l ATM Interface l WAN Interfaces l POS Interface l CPOS Interface l E-CPOS Interface l Loopback and Null Interfaces | |
Covers the commands for configuring Layer 2 technologies and features in a LAN switched network. This command reference includes: l MAC Address Table l Ethernet Link Aggregation l Port Isolation l MSTP l BPDU Tunneling l VLAN l GVRP l QinQ l VLAN Mapping l LLDP | |
Covers WAN access technologies. This command reference includes: l ATM l PPP l HDLC l Frame Relay l Modem Management | |
Covers the commands for configuring and managing IP addressing (including static and dynamic IPv4 and IPv6 address assignment), network performance optimization, ARP, and interoperation between IPv4 and IPv6. This command reference includes: l ARP l IP Addressing l DHCP l DNS l NAT l IP Performance Optimization l Flow Classification l Adjacency Table l UDP Helper l IPv6 Basics l DHCPv6 l NAT-PT l Tunneling l GRE | |
Covers the commands for configuring routes for IPv4 and IPv6 networks of different sizes, route filtering, route control, and policy based routing. This command reference includes: l IP routing basics l Static routing l RIP l OSPF l IS-IS l BGP l IP Unicast Policy Routing l IPv6 Static Routing l RIPng l OSPFv3 l IPv6 IS-IS l IPv6 BGP l IPv6 Unicast Policy Routing l Routing Policy | |
Covers the commands for Layer 3 IPv4 multicast protocols IGMP, PIM, MBGP, and Layer 3 IPv6 multicast protocols MLD, IPv6 PIM, MSDP, and IPv6 MBGP), Layer 2 IPv4 multicast protocols (IGMP snooping). This command reference includes: l IGMP Snooping l Multicast Routing and Forwarding l IGMP l PIM l MSDP l MBGP l Multicast VPN l IPv6 Multicast Routing and Forwarding l MLD l IPv6 PIM l IPv6 MBGP | |
Describes the commands to configure MPLS and MPLS VPN, This command reference includes: l MPLS Basics l MPLS TE l MPLS L2VPN l MPLS L3VPN | |
Covers the commands for classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency. This command reference includes: l ACL l QoS l MPLS Qos l FR Qos | |
Covers security feature commands. Available security features include identity authentication (AAA), access security (802.1X, MAC authentication, and portal), secure management (SSH), and attack protection (Firewall, TCP and ICMP Attack Protection, ARP attack protection, ARP Attack Protection, ND Attack Defense and URPF). This command reference includes: l AAA l 802.1X l MAC Authentication l Protal l Port Security l User Profile l RSH l Public key l PKI l IPsec l SSH2.0 l Firewall l ALG l Session Management l Connection Limit l Web Filtering l TCP and ICMP Attack Protection l ARP Attack Protection l ND Attack Defense l URPF | |
Covers high availability commands for managing failure detection and failover. Failure detection technologies focus on fault detection and isolation. Failover technologies focus on network recovery. This command reference includes: l Active Standby Switchover l Ethernet OAM l CFD l DLDP l RPR l RRPP l Smart Link l VRRP l Stateful Failover l BFD l Track | |
Covers the commands that help you manage and monitor your network, for example, manage system events, collect traffic statistics, sample packets, assess network performance, and test network connectivity. This command reference includes: l System Maintenance and Debugging l NQA l NTP l IPC l SNMP l RMON l Sampler l Mirroring l NetStream l IPv6 NetStream l Information Center l Flow Logging | |
Describes the commands of OAA-based protocols ACFP and ACSEI . This guide includes: l OAP Card l ACFP l ACSEI |