H3C S12500X-AF LSXM1QGS48HB1 Card Manua-6PW104

HomeSupportResource CenterSwitchesH3C S12500X-AF Switch SeriesH3C S12500X-AF Series SwitchesTechnical DocumentsInstall & UpgradeService Module Card ManualsH3C S12500X-AF LSXM1QGS48HB1 Card Manua-6PW104
Download Book
Table of Contents
Related Documents

LSXM1QGS48HB1 48-port 40G QSFP+ fiber
interface card

1  Identifier

The card identifier LSXM1QGS48HB1 is at the upper right corner of the front panel.

2  Specifications



This card can be used only with Type H switching fabric modules, which have a character string of SFH in their card identifiers (for example, LSXM1SFH16C1). Card damage will occur if this card is used with a switching fabric module that is not Type H.




Switching fabric module slots are covered by fan trays. To verify the card identifiers of the switching fabric modules while the switch is operating, use the display device command.


Figure 1 Interface types and numbers

(1) QSFP+ ports



Table 1 Card specifications




MIPS64 (Dual Core) @ 1.2 GHz.



Power consumption

360 W to 605 W.


48 x QSFP+ ports.

Transmission rate

40 Gbps.

Compatible device models

S12500X-AF Switch Series.

Compatible switching fabric modules

Type H switching fabric modules




·       To verify compatibility of the card with the software release you are using, see the release notes.

·       For information about transceiver modules and cables available for the card, see H3C S12500X-AF Switch Series Cards and Transceiver Modules Compatibility Matrixes.

·       If high-performance DDR memory is installed on the module (labelled with this installation information), see the release notes to verify the device software compatibility with the memory.


3  Related documentation

For module installation, see H3C S12500X-AF Switch Series Installation Guide.

For software upgrade, see the release notes for the device.



Copyright © 2020 New H3C Technologies Co., Ltd.

The information in this document is subject to change without notice.