H3C S12516R LSXM2SFH16CR1 Card Manual-APW100

HomeSupportResource CenterSwitchesH3C S12500R Switch Router SeriesH3C S12500R Switch Router SeriesTechnical DocumentsInstall & UpgradeSwitching Fabric Card ManualsH3C S12516R LSXM2SFH16CR1 Card Manual-APW100
Download Book
Table of Contents
Related Documents

LSXM2SFH16CR1 fabric module

1  Identifier

The module identifier LSXM2SFH16CR1 is in the upper right corner of the front panel.

2  About the module

Table 1 Module specifications




MIPS64 (Dual-Core) @ 1 GHz



Power consumption

194 W to 308 W

Compatible device models

H3C S12516R Ethernet switch router

Compatible interface modules

Type H interface modules




·     Before using the module on the device, see the release notes for the software running on the device to verify compatibility of the module with the software release.

·     Before you install the module, remove the protection box from it.

·     The fabric module slots are covered by fan trays. You must install the modules before installing the fan trays. To remove a module, first remove the fan tray that covers it.

·     Follow these instructions to use the ejector levers on the module:

¡     Before installing the module, press the buttons on the ejector levers to release them.

¡     After the module is fully seated into slot, close the ejector levers.

¡     Before removing the module, press the button on the ejector levers to release them and then open the ejector levers.

·     This module can be used only with Type H interface modules, which have a character of H in their module identifiers (for example, LSXM1CGQ36HBR1). This module cannot operate correctly if it is used with an interface module that is not Type H.

·     The fabric modules installed on the device must be the same model.


3  Related documentation

For module installation, see H3C S12500R Ethernet Switch Router Series Installation Guide..

For software upgrade, see the release notes for the device.



Copyright © 2019 New H3C Technologies Co., Ltd.

The information in this document is subject to change without notice.