H3C LSEM1SF12B0 Card Manual-APW100

HomeSupportResource CenterSwitchesH3C S10500X-G Switch SeriesH3C S10500X-G Switch SeriesTechnical DocumentsInstall & UpgradeSwitching Fabric Card ManualsH3C LSEM1SF12B0 Card Manual-APW100
Download Book
Title Size Downloads
H3C LSEM1SF12B0 Card Manual-APW100-book.pdf 91.16 KB
Table of Contents
Related Documents

LSEM1SF12B0 fabric module

1  Identifier

The module identifier LSEM1SF12B0 is in the upper right corner of the front panel.

2  Specifications

CAUTION

CAUTION:

Do not install fabric modules of different models on the same device.

 

Table 1 Module specifications

Item

Specification

Dimensions (H × W × D)

46 × 698 × 273 MM (1.81 × 27.48 × 10.75 in)

Power consumption

62 W to 126 W

 

IMPORTANT

IMPORTANT:

·     To verify the compatibility of the module with the product models and software releases, see the release notes.

·     A fan tray covers fabric module slots. You must install the modules before you install the fan trays, and remove the fan trays before you remove the modules.

·     Before installing fabric modules, read the fabric module slot priority description to the right of the slots carefully and install the fabric modules in order of priority.

·     Follow these instructions to use the ejector levers on the module:

¡     Before you install the module, release the ejector levers by pressing the spring clips.

¡     After the module is fully seated into the slot, press the ejector levers inward until the spring clips lock it in place.

¡     Before you remove the module, release the ejector levers by pressing the spring clips.

·     To hot swap a switching fabric module, first press the OFFLINE button on it.

 

3  Related documentation

For information about installing the module, see the installation guide for the device.

For information about upgrading system software, see the release notes.

 

Copyright © 2022 New H3C Technologies Co., Ltd.

The information in this document is subject to change without notice.