01-Fundamentals Command Reference

HomeSupportReference GuidesCommand ReferencesH3C Access Points Cloud Mode Command References(E2442 R2442)-6W10001-Fundamentals Command Reference
05-File system management commands
Title Size Download
05-File system management commands 119.33 KB

File system management commands

IMPORTANT

IMPORTANT:

·     Before managing storage media, file systems, directories, and files, make sure you know the possible impact.

·     A file or directory whose name starts with a dot character (.) is a hidden file or directory. To prevent the system from hiding a file or directory, make sure the file or directory name does not start with a dot character.

·     Some system files and directories are hidden. For correct system operation and full functionality, do not modify or delete hidden files or directories.

File system names, directory names, and file names must be compliant with the naming conventions. For more information about the naming conventions and the methods for specifying the names, see file system management in Fundamentals Configuration Guide.

Before you use the copy, delete, fixdisk, format, gunzip, gzip, mkdir, move, rename, rmdir, or undelete command on a file system, make sure the file system is not write protected.

The following matrix shows the supported storage media on different device models:

 

Hardware series

Model

Fixed storage media

Hot-swappable storage media

WA6600 series

WA6638

Flash memory

USB disk

WA6638i

Flash memory

USB disk

WA6636

Flash memory

USB disk

WA6630X

Flash memory

Not supported

WA6628

Flash memory

USB disk

WA6628X

Flash memory

Not supported

WA6628E-T

Flash memory

Not supported

WA6622

Flash memory

USB disk

WA6620

Flash memory

USB disk

WA6620X

Flash memory

Not supported

WA6300 series

WA6338

Flash memory

USB disk

WA6338-HI

Flash memory

USB disk

WA6338-LI

Flash memory

USB disk

WA6330

Flash memory

USB disk

WA6330-LI

Flash memory

USB disk

WA6322

Flash memory

Not supported

WA6322H

Flash memory

Not supported

WA6322H-HI

Flash memory

Not supported

WA6322H-LI

Flash memory

Not supported

WA6320

Flash memory

Not supported

WA6320-C

Flash memory

Not supported

WA6320-D

Flash memory

Not supported

WA6320-SI

Flash memory

Not supported

WA6320H

Flash memory

USB disk

WA6320H-LI

Flash memory

USB disk

WA6320H-XEPON

Flash memory

Not supported

WAP922 series

WAP922E

Flash memory

Not supported

WAP923 series

WAP923

Flash memory

USB disk

You cannot access a file system that is being formatted or repaired. To access the file system, wait for the ongoing operation to be completed and then use one of the following methods:

·     Use the absolute path to specify a file or directory. For example, use the dir flash:/ command to display the files and directories in the flash: file system.

·     Use the cd command to change the working directory to the root directory of the file system before accessing a file or directory in the file system. For example, to display the files and directories in the root directory of the flash: file system, perform the following tasks:

a.     Use the cd flash:/ command to change the working directory to the root directory of the file system.

b.     Execute the dir command.

cd

Use cd to change the working directory.

Syntax

cd { directory | .. }

Views

User view

Predefined user roles

network-admin

Parameters

directory: Specifies the destination directory.

..: Specifies the parent directory. If the working directory is the root directory, an error message appears when you execute the cd .. command. No online help information is available for this keyword.

Examples

# Access the test directory after logging in to the device.

<Sysname> cd test

# Change to the parent directory.

<Sysname> cd ..

copy

Use copy to copy a file.

Syntax

copy source-file { dest-file | dest-directory } [ source interface interface-type interface-number ]

Views

User view

Predefined user roles

network-admin

Parameters

source-file: Specifies the name or URL of the file to be copied. If the file resides on a remote file server rather than on the device, specify the URL of the file. Whether a URL is case sensitive depends on the server.

dest-file: Specifies the name or URL for the destination file. To copy the source file to a remote file server, specify a URL. Whether a URL is case sensitive depends on the server.

dest-directory: Specifies the destination directory or URL. To copy the source file to a remote file server, specify a URL. The device copies the source file to the destination location and saves the file with its original file name. Whether a URL is case sensitive depends on the server.

source interface interface-type interface-number: Specifies the source interface used to connect to the server. After you specify the source interface, the device uses the primary IP address of the source interface as the source IP address for outgoing packets. If you do not specify this option, the device uses the outgoing interface as the source interface.

Usage guidelines

You can use the copy command to perform the following tasks:

·     Copy a local file and save it locally.

·     Copy a local file and save it to an FTP or TFTP server.

·     Copy a file from an FTP, TFTP, or HTTP server and save it locally.

To specify a file or directory, use the following guidelines:

 

Location

Name format

Remarks

On the device

Use the file name guidelines in Fundamentals Configuration Guide.

N/A

On an FTP server

Enter the URL in the format of ftp://FTP username[:password]@server address[:port number]/file path[/file name].

The username and password must be the same as the username and password configured on the FTP server. If the server authenticates users only by the username, you are not required to enter the password.

For example, to use the username a and password 1 and specify the startup.cfg file in the authorized working directory on the FTP server 1.1.1.1, enter ftp://a:1@1.1.1.1/startup.cfg.

On a TFTP server

Enter the URL in the format of tftp://server address[:port number]/file path[/file name].

For example, to specify the startup.cfg file in the working directory on TFTP server 1.1.1.1, enter the URL tftp://1.1.1.1/startup.cfg.

To specify an IPv6 address, enclose the IPv6 address in square brackets ([ ]), for example, ftp://test:test@[2001::1]:21/test.cfg.

Examples

# Copy the test.cfg file in the current directory and save it to the current directory as testbackup.cfg.

<Sysname> copy test.cfg testbackup.cfg

Copy flash:/test.cfg to flash:/testbackup.cfg? [Y/N]:y

Copying file flash:/test.cfg to flash:/testbackup.cfg...Done.

# Copy test.cfg from the working directory on FTP server 1.1.1.1. Save the copy to the local current directory as testbackup.cfg. The FTP username is user. The password is private.

<Sysname> copy ftp://user:private@1.1.1.1/test.cfg testbackup.cfg

Copy ftp://user:private@1.1.1.1/test.cfg to flash:/testbackup.cfg? [Y/N]:y

Copying file ftp://user:private@1.1.1.1/test.cfg to flash:/testbackup.cfg... Done.

# Copy test.cfg from the current directory. Save the copy to the working directory on FTP server 1.1.1.1 as testbackup.cfg. The FTP username is user. The password is private.

<Sysname> copy test.cfg ftp://user:private@1.1.1.1/testbackup.cfg

Copy flash:/test.cfg to ftp://user:private@1.1.1.1/testbackup.cfg? [Y/N]:y

Copying file flash:/test.cfg to ftp://user:private@1.1.1.1/testbackup.cfg... Done.

# Copy test.cfg from the working directory on TFTP server 1.1.1.1. Save the copy to the local current directory as testbackup.cfg.

<Sysname> copy tftp://1.1.1.1/test.cfg testbackup.cfg

Copy tftp://1.1.1.1/test.cfg to flash:/testbackup.cfg? [Y/N]:y

Copying file tftp://1.1.1.1/test.cfg to flash:/testbackup.cfg... Done.

# Copy test.cfg from the current directory. Save the copy to the working directory on TFTP server 1.1.1.1 as testbackup.cfg.

<Sysname> copy test.cfg tftp://1.1.1.1/testbackup.cfg

Copy flash:/test.cfg to tftp://1.1.1.1/testbackup.cfg? [Y/N]:y

Copying file flash:/test.cfg to tftp://1.1.1.1/testbackup.cfg... Done.

# Copy test.cfg from the working directory on FTP server 2001::1. Save the copy to the local current directory as testbackup.cfg. The FTP username is user. The password is private.

<Sysname> copy ftp://user:private@[2001::1]/test.cfg testbackup.cfg

Copy ftp://user:private@[2001::1]/test.cfg to flash:/testbackup.cfg? [Y/N]:y

Copying file ftp://user:private@[2001::1]/test.cfg to flash:/testbackup.cfg... Done.

# Copy test.cfg from the working directory on TFTP server 2001::1. Save the copy to the local current directory as testbackup.cfg.

<Sysname> copy tftp://[2001::1]/test.cfg testbackup.cfg

Copy tftp://[2001::1]/test.cfg to flash:/testbackup.cfg? [Y/N]:y

Copying file tftp://[2001::1]/test.cfg to flash:/testbackup.cfg... Done.

delete

Use delete to delete a file.

Syntax

delete [ /unreserved ] file

Views

User view

Predefined user roles

network-admin

Parameters

/unreserved: Permanently deletes the specified file. If you do not specify this keyword, the command moves the file to the recycle bin.

file: Specifies the name of the file to be deleted. Asterisks (*) are acceptable as wildcards. For example, to remove files with the .txt extension in the current directory, enter delete *.txt.

Usage guidelines

The delete /unreserved file command deletes a file permanently. The file cannot be restored.

The delete file command (without /unreserved) moves a file to the recycle bin.

A file moved to the recycle bin can be restored by using the undelete command.

Do not use the delete command to delete files from the recycle bin. To delete files from the recycle bin, use the reset recycle-bin command.

If you delete two files that have the same name from different directories, both files are retained in the recycle bin. If you successively delete two files that have the same name from the same directory, only the most recently deleted file is retained in the recycle bin.

Examples

# Remove the 1.cfg file from the current directory.

<Sysname> delete 1.cfg

Delete flash:/1.cfg? [Y/N]:y

Deleting file flash:/1.cfg...Done.

# Permanently delete the 1.cfg file from the current directory.

<Sysname> delete /unreserved 1.cfg

The file cannot be restored. Delete flash:/1.cfg? [Y/N]:y

Deleting the file permanently will take a long time. Please wait...

Deleting file flash:/1.cfg...Done.

Related commands

reset recycle-bin

undelete

dir

Use dir to display files or directories.

Syntax

dir [ /all ] [ file | directory | /all-filesystems ]

Views

User view

Predefined user roles

network-admin

Parameters

/all: Displays all files and directories in the current directory, visible or hidden. If you do not specify this option, only visible files and directories are displayed.

file: Displays a specific file. This argument can use the asterisk (*) as a wildcard. For example, to display files with the .txt extension in the current directory, enter dir *.txt.

directory: Displays a specific directory.

/all-filesystems: Displays files and directories in the root directories of all file systems on the device.

Usage guidelines

If no option is specified, the command displays all visible files and directories in the current directory.

The directory name of the recycle bin is .trash. To display files in the recycle bin, use either of the following methods:

·     Execute the dir /all .trash command.

·     Execute the cd .trash command and then the dir command.

If multiple users perform file operations (for example, creating or deleting files or directories) at the same time, the output for this command might be incorrect.

Examples

# Display information about all files and directories in the current directory.

<Sysname> dir /all

Directory of flash:/

...

# Display files and directories in the root directories of all file systems on the device.

<Sysname> dir /all-filesystems

Directory of flash:/

...

 

Directory of usba0:/

...

Table 1 Command output

Field

Description

Directory of

Current directory.

0     -rwh      3144  Apr 26 2018 13:45:28   xx.xx

File or directory information:

·     0—File or directory number, which is automatically allocated by the system.

·     -rwh—Attributes of the file or directory. The first character is the directory indicator (d for directory and for file). The second character indicates whether the file or directory is readable (r for readable). The third character indicates whether the file or directory is writable (w for writable). The fourth character indicates whether the file or directory is hidden (h for hidden, - for visible). Modifying, renaming, or deleting hidden files might affect functions.

·     3144—File size in bytes. For a directory, a hyphen (-) is displayed.

·     Apr 26 2018 13:45:28—Last date and time when the file or directory was modified.

·     xx.xx—File or directory name.

file prompt

Use file prompt to set the operation mode for files and directories.

Use undo file prompt to restore the default.

Syntax

file prompt { alert | quiet }

undo file prompt

Default

The operation mode is alert. The system prompts for confirmation when you perform a destructive file or directory operation.

Views

System view

Predefined user roles

network-admin

Parameters

alert: Prompts for confirmation when a destructive file or directory operation is being performed.

quiet: Gives no confirmation prompt for file or directory operations except the recycle bin emptying operation.

Usage guidelines

In quiet mode, the system does not prompt for confirmation when a user performs a file or directory operation except the recycle bin emptying operation. The alert mode provides an opportunity to cancel a disruptive operation.

Examples

# Set the file and directory operation mode to alert.

<Sysname> system-view

[Sysname] file prompt alert

fixdisk

Use fixdisk to check a file system for damage and repair any damage.

Syntax

fixdisk filesystem

Views

User view

Predefined user roles

network-admin

Parameters

filesystem: Specifies the name of a file system.

Usage guidelines

Use this command to fix a file system when space in the file system cannot be used or released.

You can repair a file system only when no other users are accessing the file system.

Examples

# Repair file system flash:.

<Sysname> fixdisk flash:

Restoring flash: may take some time...

Restoring flash:...Done.

format

Use format to format a file system.

Syntax

format filesystem

Views

User view

Predefined user roles

network-admin

Parameters

filesystem: Specifies the name of a file system.

Usage guidelines

The device requires that the file systems on hot swappable storage media be VFAT file systems. To use a file system of a different type on the device, you must use this command to format the file system.

Formatting a file system permanently deletes all files in the file system. If a startup configuration file exists in the file system, back up the file if necessary.

You can format a file system only when no other users are accessing the file system.

A file system to be formatted cannot contain security log files. Only a user with the security-audit user role can delete security log files. For more information about the security-audit user role, see RBAC in Fundamentals Configuration Guide.

Examples

# Format file system flash:.

<Sysname> format flash:

All data on flash: will be lost, continue? [Y/N]:y

Formatting flash:... Done.

gunzip

Use gunzip to decompress a file.

Syntax

gunzip file

Views

User view

Predefined user roles

network-admin

Parameters

file: Specifies the name of the file to be decompressed. This argument must use the .gz extension.

Usage guidelines

This command deletes the specified file after decompressing it.

Examples

# Decompress file system.bin.gz:

1.     Before decompressing the file, you can display files whose names start with the system. string.

<Sysname> dir system.*

Directory of flash:

   1 -rw-          20 Jun 14 2018 10:18:53   system.bin.gz

 

 

1048576 KB total (472840 KB free)

2.     Decompress the file system.bin.gz.

<Sysname> gunzip system.bin.gz

Decompressing file flash:/system.bin.gz..... Done.

3.     Verify the decompress operation.

<Sysname> dir system.*

Directory of flash:

   1 -rw-           0 May 30 2018 11:42:25   system.bin

 

 

1048576 KB total (472844 KB free)

gzip

Use gzip to compress a file.

Syntax

gzip file

Views

User view

Predefined user roles

network-admin

Parameters

file: Specifies the name of the file to be compressed.

Usage guidelines

This command saves the compressed file to the file.gz file and deletes the source file.

Examples

# Compress file system.bin:

1.     Before compressing the file, you can display files whose names start with the system. string.

<Sysname> dir system.*

Directory of flash:

   1 -rw-           0 May 30 2018 11:42:24   system.bin

 

 

1048576 KB total (472844 KB free)

2.     Compress the file system.bin.

<Sysname> gzip system.bin

Compressing file flash:/system.bin..... Done.

3.     Verify the compress operation.

<Sysname> dir system.*

Directory of flash:

   1 -rw-          20 Jun 14 2018 10:18:53   system.bin.gz

 

 

1048576 KB total (472840 KB free)

md5sum

Use md5sum to use the MD5 algorithm to calculate the digest of a file.

Syntax

md5sum file

Views

User view

Predefined user roles

network-admin

network-operator

Parameters

file: Specifies the name of a file.

Usage guidelines

You can use file digests to verify file integrity.

Examples

# Use the MD5 algorithm to calculate the digest of file system.bin.

<Sysname> md5sum system.bin

MD5 digest:

4f22b6190d151a167105df61c35f0917

mkdir

Use mkdir to create a directory.

Syntax

mkdir directory

Views

User view

Predefined user roles

network-admin

Parameters

directory: Specifies a directory.

Usage guidelines

The name of the directory to be created must be unique in the parent directory.

You can create a directory only in an existing directory. For example, to create the flash:/test/mytest directory, make sure the test directory already exists.

Examples

# Create the test directory in the current directory.

<Sysname> mkdir test

Creating directory flash:/test... Done.

# Create the test/subtest directory in the current directory.

<Sysname> mkdir test/subtest

Creating directory flash:/test/subtest... Done.

more

Use more to display the contents of a text file.

Syntax

more file

Views

User view

Predefined user roles

network-admin

Parameters

file: Specifies the name of a file.

Examples

# Display the contents of the test.txt file.

<Sysname> more test.txt

Have a nice day.

# Display the contents of the testcfg.cfg file.

<Sysname> more testcfg.cfg

 

#

 version 7.1.070, Release 1201

#

 sysname Sysname

#

vlan 2

#

return

<Sysname>

move

Use move to move a file.

Syntax

move source-file { dest-file | dest-directory }

Views

User view

Predefined user roles

network-admin

Parameters

source-file: Specifies the name of the source file.

dest-file: Specifies the name of the destination file.

dest-directory: Specifies the name of the destination directory.

Usage guidelines

If you specify a destination directory, the system moves the source file to the specified directory without changing the file name.

Examples

# Move the flash:/test/sample.txt file to flash:/, and save it as 1.txt.

<Sysname> move test/sample.txt 1.txt

Move flash:/test/sample.txt to flash:/1.txt? [Y/N]:y

Moving file flash:/test/sample.txt to flash:/1.txt ...Done.

# Move the b.cfg file to the test2 directory.

<Sysname> move b.cfg test2

Move flash:/b.cfg to flash:/test2/b.cfg? [Y/N]:y

Moving file flash:/b.cfg to flash:/test2/b.cfg... Done.

pwd

Use pwd to display the working directory.

Syntax

pwd

Views

User view

Predefined user roles

network-admin

Examples

# Display the working directory.

<Sysname> pwd

flash:

rename

Use rename to rename a file or directory.

Syntax

rename { source-file | source-directory } { dest-file | dest-directory }

Views

User view

Predefined user roles

network-admin

Parameters

source-file: Specifies the name of the source file.

source-directory: Specifies the name of the source directory.

dest-file: Specifies the name of the destination file.

dest-directory: Specifies the name of the destination directory.

Usage guidelines

This command is not executed if the destination file or directory name is already used by an existing file or directory in the working directory.

Examples

# Rename the copy.cfg file as test.cfg.

<Sysname> rename copy.cfg test.cfg

Rename flash:/copy.cfg as flash:/test.cfg? [Y/N]:y

Renaming flash:/copy.cfg as flash:/test.cfg... Done.

reset recycle-bin

Use reset recycle-bin to delete files from the recycle bin.

Syntax

reset recycle-bin [ /force ]

Views

User view

Predefined user roles

network-admin

Parameters

/force: Deletes all files in the recycle bin without prompting for confirmation. If you do not specify this option, the command prompts you to confirm the deletion operation for each file.

Usage guidelines

The delete file command only moves a file to the recycle bin. To permanently delete the file, use the reset recycle-bin command to delete the file from the recycle bin.

Examples

# Empty the recycle bin. (In this example there are two files in the recycle bin.)

<Sysname> reset recycle-bin

Clear flash:/a.cfg? [Y/N]:y

Clearing file flash:/a.cfg... Done.

Clear flash:/b.cfg? [Y/N]:y

Clearing file flash:/b.cfg... Done.

# Delete the b.cfg file from the recycle bin. (In this example there are two files in the recycle bin.)

<Sysname> reset recycle-bin

Clear flash:/a.cfg? [Y/N]:n

Clear flash:/b.cfg? [Y/N]:y

Clearing file flash:/b.cfg... Done.

Related commands

delete

rmdir

Use rmdir to delete a directory.

Syntax

rmdir directory

Views

User view

Predefined user roles

network-admin

Parameters

directory: Specifies a directory.

Usage guidelines

To delete a directory, you must delete all files and subdirectories in the directory permanently or move them to the recycle bin. If you move them to the recycle bin, executing the rmdir command permanently deletes them.

Examples

# Delete the subtest directory.

<Sysname> rmdir subtest/

Remove directory flash:/test/subtest and the files in the recycle-bin under this directory will be deleted permanently. Continue? [Y/N]:y

Removing directory flash:/test/subtest... Done.

sha256sum

Use sha256sum to use the SHA-256 algorithm to calculate the digest of a file.

Syntax

sha256sum file

Views

User view

Predefined user roles

network-admin

Parameters

file: Specifies the name of a file.

Usage guidelines

You can use file digests to verify file integrity.

Examples

# Use the SHA-256 algorithm to calculate the digest of file system.bin.

<Sysname> sha256sum system.bin

SHA256 digest:

0851e0139f2770e87d01ee8c2995ca9e59a8f5f4062e99af14b141b1a36ca152

tar create

Use tar create to archive files and directories.

Syntax

tar create [ gz ] archive-file dest-file [ verbose ] source { source-file | source-directory }&<1-5>

Views

User view

Predefined user roles

network-admin

Parameters

gz: Uses gzip to compress the files and directories before archiving them. If you do not specify this keyword, the command archives the files and directories without compressing them.

archive-file dest-file: Specifies the archive file name. If you specified the gz keyword, the extension of the archive file name must be .tar.gz. If you did not specify the gz keyword, the extension of the archive file name must be .tar.

verbose: Displays the names of the successfully archived files and directories. If you do not specify this keyword, the command does not display the names of the successfully archived files and directories.

source { source-file | source-directory }&<1-5>: Specifies the files and directories to be archived. The argument can be a space-separated list of up to five items. Each item can be a file or directory name. The files and directories must be in the current working directory.

Examples

# Archive the 1.cfg and 2.cfg files and the test directory to a.tar.

<Sysname> tar create archive-file a.tar source 1.cfg 2.cfg test

Creating archive flash:/a.tar Done.

# Compress and archive the 1.cfg and 2.cfg files and the test directory to b.tar.gz.

<Sysname> tar create gz archive-file b.tar.gz source 1.cfg 2.cfg test

Creating archive flash:/b.tar.gz Done.

# Compress and archive files and directories, and display the successfully archived files and directories.

<Sysname> tar create gz archive-file c.tar.gz verbose source 1.cfg 2.cfg test

1.cfg

2.cfg

test/

test/a.log

test/subtest/

test/subtest/aa.log

Related commands

tar extract

tar list

tar extract

Use tar extract to extract files and directories.

Syntax

tar extract archive-file file [ verbose ] [ screen | to directory ]

Views

User view

Predefined user roles

network-admin

Parameters

archive-file file: Specifies the archive file name. The extension can be .tar or .tar.gz.

verbose: Displays the names of the successfully extracted files and directories.

screen: Displays the content of the extracted files and directories on the screen. The extracted files are not saved.

to directory: Saves the extracted files and directories to a different directory. The directory argument specifies the directory.

Usage guidelines

IMPORTANT

IMPORTANT:

Before specifying the screen keyword for this command, use the tar list command to identify the types of the archived files. As a best practice, specify the keyword only if all archived files are text files. Displaying the content of an archived non-text file that contains terminal control characters might result in garbled characters and even cause the terminal unable to operate correctly. To use the terminal again, you must close the current connection and log in to the device again.

 

If you do not specify the screen keyword or the to directory option, the command saves the extracted files and directories to the working directory.

The command saves the extracted files and directories by using their original names. If a file or directory that has the same name as an extracted file or directory already exists in the destination directory, the file or directory is overwritten.

Examples

# Extract files and directories from archive file a.tar.

<Sysname> tar extract archive-file a.tar

Extracting archive flash:/a.tar Done.

# Extract files and directories from archive file b.tar.gz, and display the names of the successfully extracted files and directories.

<Sysname> tar extract archive-file b.tar.gz verbose

1.cfg

2.cfg

test/

test/a.log

test/subtest/

test/subtest/aa.log

# Extract files and directories from archive file c.tar.gz, and display the content of the files on the screen.

<Sysname> tar extract archive-file c.tar.gz screen

#

 version 7.1.070, Release 1201

#

 sysname Sysname

#

...

Related commands

tar create

tar list

tar list

Use tar list to display the names of archived files and directories.

Syntax

tar list archive-file file

Views

User view

Predefined user roles

network-admin

Parameters

archive-file file: Specifies the archive file name. The extension can be .tar or .tar.gz.

Examples

# Display the names of archived files and directories.

<Sysname> tar list archive-file a.tar

1.cfg

2.cfg

test/

test/a.log

test/subtest/

test/subtest/aa.log

Related commands

tar create

tar extract

undelete

Use undelete to restore a file from the recycle bin.

Syntax

undelete file

Views

User view

Predefined user roles

network-admin

Parameters

file: Specifies the name of the file to be restored.

Usage guidelines

If a file with the same name already exists in the directory, the system prompts whether or not you want to overwrite the existing file. If you enter Y, the existing file is overwritten. If you enter N, the command is not executed.

Examples

# Restore the copy.cfg file, which was moved from the root directory of the flash: file system to the recycle bin.

<Sysname> undelete copy.cfg

Undelete flash:/copy.cfg? [Y/N]:y

Undeleting file flash:/copy.cfg... Done.

# Restore the startup.cfg file, which was moved from the flash:/seclog directory to the recycle bin.

·     Method 1:

<Sysname> undelete seclog/startup.cfg

Undelete flash:/seclog/startup.cfg? [Y/N]:y

Undeleting file flash:/seclog/startup.cfg... Done.

<Sysname>

·     Method 2:

<Sysname> cd seclog

<Sysname> undelete startup.cfg

Undelete flash:/seclog/startup.cfg? [Y/N]:y

Undeleting file flash:/seclog/startup.cfg... Done.

 

  • Cloud & AI
  • InterConnect
  • Intelligent Computing
  • Security
  • SMB Products
  • Intelligent Terminal Products
  • Product Support Services
  • Technical Service Solutions
All Services
  • Resource Center
  • Policy
  • Online Help
All Support
  • Become a Partner
  • Partner Resources
  • Partner Business Management
All Partners
  • Profile
  • News & Events
  • Online Exhibition Center
  • Contact Us
All About Us
新华三官网