About the H3C Anchor configuration guides

Fundamentals Configuration Guide

Describes how to log in to and set up the device. This guide includes:

·     CLI (CLI overview and advanced CLI configuration)

·     FTP and TFTP

·     RBAC

·     File system management

·     Login management (CLI login and user configuration and management)

·     Software upgrade

·     Configuration file management

System Management Configuration Guide

Describes how to manage the device and logs by using device management, information center, and NTP features. This guide includes:

·     Information center

·     Device management

·     NTP

Interface Configuration Guide

Describes how to configure Ethernet interfaces, loopback interfaces, null interfaces, inloopback interfaces, and bulk interface settings. This guide includes:

·     Bulk interface configuration

·     Ethernet interface

·     Loopback, null, and inloopback interface

Network Connectivity Configuration Guide

Describes how to configure network connectivity-related Layer 2 and Layer 3 features. This guide includes:

·     About the network connectivity configuration guide

·     MAC address table

·     Ethernet link aggregation

·     Port isolation

·     VLAN

·     Loop detection

·     Spanning tree

·     LLDP

·     Layer 2 forwarding

·     ARP

·     IP addressing

·     DHCP

·     DHCPv6

·     DNS

·     IP performance optimization

·     IPv6 basics

·     IP routing basics

·     IP forwarding basics

·     Static routing

·     IPv6 static routing

·     Multicast overview

·     IGMP snooping

·     MLD snooping

WLAN Access Configuration Guide

Describes how to configure WLAN access. This guide includes:

WLAN access

AP Management Configuration Guide

Describes how to configure centralized management of fit APs in an Anchor AC+fit AP network. This guide includes:

·     Anchor AP

·     AP management

WLAN Security Configuration Guide

Describes how to configure WLAN security, and WIPS features, and reporting user application and URL session information to the server. This guide includes:

·     WLAN security

·     WIPS

Radio Resources Management Configuration Guide

Describes how to manage radio channel, power, rate, and load balancing, and measure link quality and WLAN performance. This guide includes:

·     Radio management

·     WLAN load balancing

·     WLAN radio resource measurement

·     Channel scanning

·     Band navigation

·     Spectrum management

·     WLAN RRM

·     WLAN radio load balancing

WLAN Roaming Configuration Guide

Describes how to configure wireless client roaming and fast roaming. This guide includes:

·     WLAN roaming

·     802.11r

WLAN Traffic Optimization Configuration Guide

Describes how to optimize WLAN traffic by using multicast optimization and user isolation. This guide includes:

·     WLAN multicast optimization

·     User isolation

WLAN Advanced Features Configuration Guide

Describes how to configure advanced WLAN optimization, and Bonjour gateway. This guide includes:

·     WLAN optimization

·     Bonjour gateway

User Access and Authentication Configuration Guide

Describes how to configure wired and wireless access and authentication. This guide includes:

·     WLAN authentication

·     WLAN IP snooping

·     AAA

·     802.1X

·     MAC authentication

·     Port security

·     Portal

Security Configuration Guide

Describes how to configure identity authentication (PKI), secure management (password control, public key management, IPsec, and SSH), and security protection (IP source guard and ARP attack protection). This guide includes:

·     ACL

·     Time range

·     User profile

·     Public key management

·     PKI

·     IPsec

·     SSH

·     Attack detection and prevention

·     ARP attack protection

·     ND attack protection

·     Crypto engine

·     Password control

QoS Configuration Guide

Describes how to configure wired and wireless QoS. This guide includes:

·     WLAN QoS (WMM, SVP, bandwidth guaranteeing, and client rate limit)

·     QoS (priority mapping, traffic policing, traffic filtering, and priority marking)

Network Management and Monitoring Configuration Guide

Describes how to manage networks, display system information, control network traffic, sample packets, analyze network performance, and debug network connectivity. This guide includes:

·     System maintenance and debugging (ping, tracert, and system debugging)

·     CWMP

·     NQA

·     SNMP

·     NETCONF

·     Process monitoring and maintenance

Acronyms

Lists the significant acronyms in the configuration guides.